How WD My Book World Edition Network Attached Storage backup with Vista backup

Hello
I have a dandy new My Book World Edition which is recognized by Vista and to which I have traced some readers. I'm trying to get a copy of Vista to 64 backup to save a backup on this device, but it does not work. I hope someone here can have successfully addressed this. I tried the backup on mapped drives, but they do not seem to be listed under the local computer. I then select the My Book World Edition device networking (by browing to it), and even if I correctly enter the usernam and password, backup of Vista tells me that it can't open the backup on her drive.

Thanks for any help in setting this up.

MBO Monte

Hello monteolsen1,

Thanks for posting your question on the Microsoft answers Forum.

I don't know if you have the Western Digital My Book World Edition is supported in a 64-bit environment of Windows Vista. Windows Vista displayed a supported operating system, but it does not show a 64 bit system.

Please contact Western Digital for its support in this area.
Their site is:
http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/popup_adp.php?p_faqid=1048&p_created=1060098616&p_sid=KYc5ENuj&p_lva=&p_li=&p_redirect=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9MzUsMzUmcF9wcm9kcz0yMjgsMjA5LDIyMSZwX2NhdHM9MCZwX3B2PTMuMjIxJnBfY3Y9JnBfc2VhcmNoX3R5cGU9YW5zd2Vycy5zZWFyY2hfbmwmcF9wYWdlPTEmcF9zZWFyY2hfdGV4dD12aXN0YSA2NC1iaXQ!

Sincerely,

Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Western Digital 2 to my direct book DT RJ45 Network Attached Storage

    I wonder if anyone else has problems with the Vista SP2 attempt to install the driver for this device (Driver ID 20438948)?

    When an attempt is made to install this driver, the installation fails.  Unfortunately, it corrupts the Vista SP2 operating system because shadow copies no longer able to do so and when a restart is attempted, the restart will fail with a 0x0000009F - DRIVER_POWER_STATE_FAILURE BSOD.  Recovery involves a reboot in the repair console, then a restore of the system, reboot followed.  Tent a system without enter repair console restore fails because of damage to the operating system.

    Once this is done, and the system reboots, shadow copy and restarts on own work.

    I must stress that without this driver recommended, the drive is accessed as a network attached device or if specific folders are mapped as drive letters.

    Thanks for reading time and possible responses.

    Jim

    Hello

    I would like to inform you that, given that the pilot exited WDC they would need to update the driver, because we provided them with Vista Service Pack 2 specification, they are responsible for the update of drivers.

    WDC Contact: http://support.wdc.com/contact/index.asp?wdc_lang=en

  • Blue screen on a Vista Ultimate computer with My Book World Edition NAS drive when SSDP Discovery service is enabled.

    I recently added a Western Digital My Book World Edition (White Light) 1 TB NAS drive to my home network for backup purposes. The drive works very well with my two wired computers Windows XP and my computer Windows Vista Home Edition wireless. My problem is with Windows Vista Ultimate (32 bit) wireless station (a Lenovo IBM ThinkPad X 61 Tablet PC).

    On the Vista Ultimate computer, if I have sudden, Normal startup, then the computer will work fine except for when I go to shut down the computer. When I stop, the computer crashes for twenty minutes, suffered a blue screen (BSOD, saying he was arrested wrongly) event and then restarts automatically. This only happens if the drive My Book World Edition is online on the network. Turn the player off line and there is no problem on the computer.

    I reduced the problem down to the SSDP Discovery service. If I disable the SSDP Discovery service, then the problem goes away. (I do not consider that a viable permanent solution.)

    The big difference between Vista computers is only on the computer to Vista Home (one that has no problem), MIMBOE drive does not appear in Device Manager at all. On the computer Vista Ultimate (the one with the problem), the reader MIMBOE appears once under the record heading and once under system devices.

    Any help will be appreciated. Thank you.

    Sorry to everyone i this is my first attempt to answer.  I had the same problem with the hard drive WD book networked world stop.  WD has released a new firmware that fixed my problem on September 10, 2009.  I suggest that you try to update the firmware and maybe you'll be as lucky as I was.

  • X 61 restarts on shutdown when Western Digital "My Book World Edition" is online.

    I recently installed a My Book World Edition (White Light) 1 TB drive on my network home. Three out of the four computers on the network have no problem with the drive. These three include two Windows XP computers running Norton Internet Security 2009 which can be found on the cable part of the network. The third computer running Windows Vista Home Edition (32 bit) and Norton 360 on the part the network wireless.

    My fourth computer is one that has the problem. It's a Lenovo X 61 IBM ThinkPad Tablet PC under Windows Vista Ultimate (32 bit) and Norton Internet Security 2009 (in addition, please note that one of the user of the laptop has enabled the BitLocker encryption). Whenever the drive My Book World Edition is online on the network, the ThinkPad doesn't stop correctly. Instead, the computer automatically restarts with an error message saying that it stop unexpectedly.

    I did a broad diagnosis of the problem. There is no problem at all if the MIMBOE drive is not on the network, and first of all, the problem occurred when I installed the drive. If I disable "SSDP Discovery" service with "msconfig", then the problem goes away. I temporarily replaced the SSDPSRV. DLL (the "SSDP Discovery" Service Manager) file on my computer with the same file from the Vista computer work, but there was no change, if the file is not corrupted. I disabled all services that depend on the service 'SSDP Discovery', but the problem occurred again until 'SSDP Discovery' has been enabled.

    Help, please. Currently, I have to wait about 20 minutes for my computer to give up trying to stop before I can turn it off. (I can usually managed to close properly if, after it restarts spontaneously, I can't connect and I quickly select "Shut Down" from the login screen before completing the startup completely.)

    Solved.  It seems that the Western Digital driver blocking going to pull apart the My Book World Edition when Windows is shut down.  I don't know why things work correctly on Windows 7 Ultimate computer cable, but repeatedly crashes on my laptop using Wifi.

    I wiped and reloaded 7 before I was certain that the discovery software is at fault.  You can manually mount the NAS without installing discovery, which is probably the best option, but in my case, I didn't want to reinstall a 3rd time.

    Looking at the driver files loaded for the WDMBWE in the Device Manager, you will see on called WDMBW_1NC.dll which is located in C:\windows\system32.  This is the only file in the list that is specific to the NAS.  I made a backup of the file to the desktop, then renamed the .dll in .bak file.

    Grip closure have been eliminated.  I am still able to access the drive using the standard address:

    \\192.168.1.101\ in windows Explorer.

  • Cannot display the Buffalo LinkStation Quad Network Attached Storage on network.

    Original title: Buffalo LinkStation Quad Network Attached Storage - LS-QL/R5

    I have problems to view this device from a Windows 7 computer.  All the other computers in my house running trouble Windows 7 and Vista are able to see the device.

    When I open the network sharing Center, it simply does not appear.  I am, however, able to navigate on the device using a browser or access music on the device using DLNA.

    Y at - it an option of security somewhere that I missed?

    Hello


    1. the device has not detected in Device Manager?
    2. don't you make changes on the computer before the show?
    3. you receive an error message on the computer?
    Method 1:
    Run the fix it and check.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 2:
    Perform a clean boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135

    Note: After the shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

    Method 3:
    You can download the driver from the manufacturer's Web site and check.

    http://www.buffalotech.com/support-and-downloads

    Check out the link:
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Method 4:
    You can temporarily disable the antivirus and firewall on the computer and check if the device is not detected.

    Enable or disable Windows Firewall
    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    NOTE: Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

    You can see the following link to disable the Antivirus installed on your computer software.

    Disable the anti-virus software
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    NOTE: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    You can contact the Buffalotech support for assistance:
    http://www.buffalotech.com/contact
    Hope this information is useful.
  • Network shares are slow with Vista Business SP2

    Hello

    I have Vista Enterprise 32-bit SP2 in a Hyper-V virtual machine.  I use an internal application with strong interactions with a network share that is on another virtual machine on the same server.  When I run the application on a server 2008R2, he completed in two minutes, which is expected.  When it works on Vista, he finished in eight minutes (4 times slower), which is unacceptable.  I am forced to use Vista because it is the last operating system supported by Windows Embedded CE 6.0 Platform Builder Service Pack 1.
    I tried to disable autotune and RSS, I added = 1 to HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\System CopyFileBufferedSynchronousIo, and I also tried safe mode with network experience.  Nothing works.
    Is there something else to try?  Is there a way to clone the network settings on 2008R2 for vista, because they work?
    The NIC reports it as: Microsoft Virtual Machine network adapter of Bus with a speed of 10 GB (10 gigabits) link.
    Thank you
    John

    This Forum is oriented toward consumers. This type of question would be better asked in the Forums Pro Technet THERE.

    http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

  • BlackBerry smartphones upgrade to version 4.5 on the Verizon 8830 World Edition network

    As I understand it, Verizon doesn't support or offer version 4.5 on the Blackberry 8830 and I tried to auto update directly from the "Update your device software" page of Blackberry and get an error message "an error occurred when connecting to the service. Please check your internet connection. »

    Someone at - it no work around for this problem and or a way to install 4.5 on an 8830.

    Thank you

    You can find the beta on the internet and install those. Keep in mind, if anything happens, Verizon will not help you. So, to do this at your own risk. I installed a beta version and loved it, except that it was extremely slow and I have too many commercial e-mail among other things to have a slow BB. I'm hoping to find the real for 8830 someday. But for now, theres nothing you can do.

  • Linksys NAS200 2Bay SATA 2Port Network Attached Storage is not compatible with Windows 7

    Searching for answers, I found this: http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Hardware&p=Linksys%20NAS200%202Bay%20SATA%202Port%20Network%20Attached%20Storage&v=Linksys&uid=NAS200&l=en-US&pf=0&pi=5&c=Networking&sc=Network%20Attached%20Storage&os=32-bit

    Aparently this device is not compatible with Windows 7.

    I have one of those NASs with 2 SATA hard drives of 500 GB searched... I have all my music, movies, photos, and all of our backups of document on this device.  Because I have set up as a RAID array, I don't think I can remove the discs and put them in something to get my "stuff".  We used to use Win XP but recently upgraded both our machines to Win 7.

    If someone has been able to find a way to get to their stuff on one of those Linksys NAS200 devices without finding another WinXP machine somewhere?

    Hi Ken Mizell,

    If the device is not supported in Windows 7, you need to use a computer that is running Windows XP to move the data to a new storage device.

  • How to reduce noise from the FAN on Portege M400 with Vista?

    M400 (* _VISTA_ * with newer utilities for electric model) FAN blows very noisy constantly regardless of real need for cooling.

    Even with zero responsible jobs, less than 1% (flat curve) of the activity, the processor speed to 50% in the model of power and all power to the minimum settings, FAN does not reduce the speed. After a reboot, for a short time, the noise is bearable, we can conclude that the FAN seems to be capable of low speed.

    _Problem is the same, even if the M400 is outside 9 ° c! _

    On all the M400, we, the problem is the same.
    How to work with M400 in an environment quiet?

    Post edited by: Admin

    HM, I wonder why you open a new thread. I mean, I have read the solution and the last of them is the BIOS 2.1N.

    So, please contact a Service partner to install this BIOS or google for it, since theres no alternative at the moment. :(

    Sorry mate

  • How to install Xp in Compaq Cq 40-145 preloaded with Vista Home Basic laptop.

    Hi I want to uninstall my computer vista laptop is Compaq presario Cq40 - 145

    When I boot with the xp cd I have encounter a problem screen blue with hard drive error message is not configure... my...

    Can anyone suggest me how to do... and I want that all drivers for xp... Please suggest me as soon as posible...

    is my laptop p/n number: FZ737PA

    Message edited by rahul2009 on 11/05/2009 22:59
    Message edited by rahul2009 on 12/05/2009 01:26

    Hello

    First make the Vista backup. Here is all the information, how do.

    Now you need to integrate your drivers Sata win nLite.

    Here is the guide how to do it and here are the drivers Sata for you. Just unRAR it drivers with winrar.

    Remember, also, that you use the Windows XP SP2 version. If you have not got the version SP2 here you can download this service pack

    and here you have a guide to how to integrate this file with your new system of nLite.

    In this program, you can even burn your new XP cd with this driver.

    Drivers for your model:

    Chipset here (first install it and reboot)

    Intel Matrix Storage Manager here

    Intel 4500MHD graphics here

    Intel 5100 wireless here

    or

    Broadcom Wireless here

    Bluetooth wireless here

    .NET framework (required before IQ) here

    HP Quick Launch buttons here

    MS-UAA  (before its IDT, model and drivers ATI HDMI), here

    IDT High-Definition Audio CODEC Pilot,

    1 sp41693, pilot, work reported in XP here view

    2 SP39671, driver, jobs reported in XP here or here view

    High-Definition Audio (HDA) modem here

    ALPS Touchpad here

     

    NIC Realtek 8111 here

    JMB38X Card Reader host controller driver here

    If you have had for 7 unknown devices (buttons drivers) here

    Installation--> right click machine.inf, choose install.

  • How can I activate my bluetooth for my dell inspiron with vista?

    I have a dell inspiron 1525 and may not know how to turn on bluetooth. I think that is a bluetooth because it contains a bluetooth symbol near the wifi symbol. Im trying to transfer the old pictures FRO my old phone not activated on my computer and then my new phone

    Thank you

    Hello

    The Bluetooth works with a phone? Check with their support and their documentation.

    The problems with Bluetooth devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    Set up a Bluetooth compatible device
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    The problems with Bluetooth devices
    http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

    How to set up a Bluetooth connection
    http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

    Hardware devices not detected or does not
    http://support.Microsoft.com/GP/hardware_device_problems

    The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
    When you click the item
    http://support.Microsoft.com/kb/960531/en-us

    If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

    BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
    devices around you. For each detected Bluetooth device, it displays the following information:
    The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
    Last detection time and more. BluetoothView can also warn when a new Bluetooth device
    is detected, by displaying a balloon in your bar tasks or playing a little beep. http://www.NirSoft.NET/utils/bluetooth_viewer.html

    ================================

    Check with Support Dell and their forums.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Satellite M50: How to make the media buttons on the right works with Vista

    Hello
    I successfully upgraded to Vista a all parts have been recognized in the right way.
    Now I am looking for a method to make the multimedia control buttons works with vista.

    You know a laptop that has the buttons too and for whom is the Vista drivers available?

    Kind regards
    Steffen Schreyer

    Hello

    Generally these additional buttons needs a Toshiba control utility which is responsible for the good condition of these key market.
    Unfortunately, it does appear that an update of the BIOS and the driver of BT has been published for the Satellite M50 PSM53.

    But in other sections, you might find a value-added package for Vista.
    This package includes a few additional applications.

    Maybe this works on an M50. Check the download page of several series of laptops on the pilot.
    If this will not work, then you can do nothing ;(

    Good luck

  • How to fix error 0x800CCC0B code in windows live mail with vista 64-bit

    Recently I get this error everytime I open my email.

    Can't send or receive messages for the POP3 account. An unknown error has occurred.

    Server: 'POP.telus.net '.
    Windows Live Mail error ID: 0x800CCC0B
    Protocol: POP3
    Port: 110
    Secure (SSL): No.

    I tried to disable my firewall and my anti virus and who doesn't, I did a full scan and a health report, without any problem, degrag, updated, weveryhing seems to be normal...  I checked my settings, and all seem to be OK according to telus...

    If I continue to restart it, then finally this error disappears, and I get another error 0x800CCC67

    can someone help me please.   Thank you

    Hello curleecues,

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

     

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  • How can I get my Visioneer 8700 scanner to work with Vista

    My scanner is compatible with XP on Vista I understand it is not supported by Visioneer. However, I feel that there are ways around the problem. Help, please!

    Hello

    the manufacturer has written drivers for their products, not microsoft

    Here's what the drivers they have

    http://support.Visioneer.com/products/8700/default.asp

    It stops at XP

    We cannot do something that

  • How do I disable touch mouse on Dell Vostro 1500 with Vista? _ I use a logitech mouse.

    Cursor seems to jump all over the screen when I type. Causes

    Hello

    Mouse configuration panel - look for the TouchPad settings - perhaps under the parameters of the device and your own tab
    may be different (it is NOT the Scrollings tab which is for the mouse). On some, you can activate
    and disable scrolling and/or define the size of the area and the sensitivity of the touchpad.

    Some will have a TouchPad progam/control icon in the Notification area near the clock-
    at the bottom right.

    Some models also have quick access to toggle the touchpad keys.

    It was reported a problem with Dell Touchpads too sensitive - check with
    Dell support and forums for known issues.

    Dell support
    http://support.Dell.com/

    Dell support drivers - product manual & warranty Info (left side) - and much more
    http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

    Dell forums
    http://en.community.Dell.com/forums/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for

  • Firefox 18.0 black screen only on secondary screen / black box around the mouse, Windows XP, all updates

    Display after the automatic update of firefox firefox 18.0 normal if has a totally black screen (inside the border) if the window is secondary - window on the main screen. The mouse pointer (arrow) also has a box around it when firefox on the seconda

  • front panel display Center during execution

    Is there a way to make the display panel is centered when I create an executable on a vi?  I have a clock that counts down time.   In the source code its centered.  When I create an exe its tilted to the right a little.  I tried all the settings unde

  • controlling supreme (1)

    Hi I have a game controlling supreme called TI installed very well on xp and windows 7, but when I try to play online multyplayer with Buddy on windows 7, it does not work it keeps on saying it tries to download a patch, he did the same after that I

  • Adjust the color and the lightness/darkness for photos on HP Photosmart 6510

    When I print pictures, I want to be able to adjust the color, saturation and brightness, because the printer prints often dark and too intense in color. My last printer have an option for this in the menu, but with the 6510 I can't. Now a lot of my i

  • Who put level or decommissioning? I have a hp dv2320us amd proc.

    I hate vista, and I feel I want to downgrade to XP, but it seems that it's not so easy. I have a HP Pavilion dv2320us notebook PC Serial number [personal information] Product number rv323ua My laptop can't handle Win7? I use it for a lot of game. Or