How WE / OFF sansa clip jam

Similar Questions

• Cannot activate Clip Jam with Audible Manager

  I've seen a lot of posts on the forum about the problems with Sport Clip / Clip Zip / Zip Clip + and Audible Manager.  Add Clip jam to this list.

  Until you can transfer books on the device with the Audible Manager, you're supposed to 'activate' the device.  When I try this, I get "Failed to set the activation of device data."    Other SanDisk devices have the same problem, but none of the workarounds to solve the problem for other devices work for the Jam Clip.

  Someone at - he heard of a fix or a workaround for the Jam Clip to activate with Audible Manager?

  Thank you.

  I just got the solution of sound support.  It is similar to the solution used for the Sport Clip: the drive letter assigned by Windows for the Jam Clip must be changed by default.

  Instructions for Windows 7:

  With the Jam Clip connected to the computer, select Control Panel-> administration-> computer management tools

  In the computer management dialog box, select disk management in the left pane.

  One of the disks will be the Jam Clip.  Right-click on it and select "Change Drive Letter and paths... »

  Select the current drive letter and click on 'change... '. »

  Assign the drive B: for the Jam Clip letter (assuming that you have not already another device, for example a floppy drive)

  Under Audible Manager, in the bottom right pane, where it says 'Sansa Clip Jam', make sure that the 'Internal' option button is selected.  With the new drive letter assigned, you can then activate the device.

  Good luck!

• New Sansa Clip + turns off after a few minutes of play audiobook...

  Hello

  I was wondering if someone could help me.  Have been enjoying my new Sansa Clip + for the past two weeks.  Just been using the function of radio - finally understood how to load an audio cd on the drive.  The drive is recognized on my computer, and audio tracks are in the player very well.  When I start the audio book, the player will stop after about three minutes of play.  I need to do a soft reset before it turns on again.  This happens whenever I try to read the audio book.  I have not loaded all of the songs on the player at the moment and I was wondering if this problem was something I got wrong, or if I was just a faulty drive.  This is my first mp3 player, so I'm new to this. :-)  The radio and the pre-loaded songs work fine.  I contacted the customer service, but have had no response.  Thought I would try the forum before you give them a call.

  I hope someone can help,

  El

  You must use a ripping software and extract the mp3 or wma files. The Clip + probably does not even support .wav files.

• Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  Hi all

  Sansa clip does not play flac frimware is 1.1.30f1 how to solve this problem

  I need software to convert mp3 to flac, please guide me because I want to test flac on sansa clip

  Thank you

  He plays very well FLAC.  There is probably a problem with your files.  They are not coded correctly, or you use the ID3 tags.  The Clip only supports normal Vobis comment tags to FLAC / Ogg.  Mp3Tag should be able to fix your labels if that's the problem.

  In addition, there is no reason to convert MP3 to FLAC.  It will sound the same as the MP3, but you will have much larger files.  If you want to get the advantage of FLAC (or any lossless format) you will need to rerip your CDs.

• How can I download my podcasts from itunes to my sansa clip

  How can I sync my podcasts from itunes to my sansa clip

  Hi PEYTON.

  Try these steps and check the result.
  a. connect your Sansa clip to the USB port on your computer.
  b. open your iTunes program. If your Sansa clip is not iTunes compatible, it will not sync with iTunes and it will not be displayed as a device on the iTunes program.
  c. on your iTunes program click the podcast icon to show the files you want to download to your Sansa clip.
  d. right click on the first file, and then click view in the Solution Explorer window. This will open the folder that contains all of the iTunes podcasts.
  e. copy all the podcasts and load Sansa clip by opening his drive in Windows Explorer.

  For further assistance, we recommend posting your query to iTunes Forums.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sansa clip plus and itunes - how to transfer files

  I'm really ignorant, but I would be very grateful for the help.   I did research on this topic here but do not understand the answers...

  Basically, I use itunes on Windows XP.  I just boughts liked a Sansa clip.

  I don't know even what kind of files I have in itunes - they are mostly ripped a CD. I guess they were mp3s but looking at recent postings here it looks like they may be something else (ACC file extensions?).   Anyway, I was fiddling around in itunes but have not been able to verify what are the types of files ('cos I'm ignoring it!)

  Earlier today I just copied some of the songs in itunes, go to Windows Explorer and paste in the section music to the Sansa Clip file.   They played very well...

  Then I went and deleted these files on the Sansa Clip Plus, because they were just an experiment.

  Then I went back to itunes and copied the files over.   This time, when I went to paste the files in Sansa Clip Plus in Windows Explorer, I found the option to paste is grayed out.

  I'm stuck and would be incredibly grateful for the help.   As you can from it of the mess that the above, any guidance I get has to be pretty basic.

  the easiest way is just to look at the files in windows Explorer. go to documents, then music. the music folder to itunes folder. That's where itunes stores all the files. you need to configure the computer to display file extensions for known file types. Find your MP3 files and copy them from windows Explorer, then glue them to the clamp.

• Why my sansa clip itself turning on and off

  When I turn my Sansa clip with side switch, it waits 2 seconds then turns back on itself. After 15 seconds, it is empty, but then after about 50 seconds it starts again. The only way I found to save batteries from the apartment is to run to the last song in an album and let run until the end.

  Have you tried a reset of the system?  Hold the switch market upward for 15-30 seconds.

• How can I me floor device works with my sansa clip zip 4 GB mp3 player?

  Device stage seems to be a nice software to sync music from computer to my new mp3 player, but it doesn't seem to be in my new Windows 7 software? What should I download it?

  Or what I need to download (also) on the Sansa Clip Zip?

  Help please..!

  Thank you

  / Leif

  Read here.

  See you soon,.

  Jerry

• When I connect my SanDisk Sansa Clip MP3 player Zip I get Code 10 device cannot start

  Original title: Code 10

  When I try to plug in my SanDisk Sansa Clip Zip MP3 player I get the device Code 10 cannot start.  I have XP.  The MP3 came with a 2.0 USB.  I don't know what the USB on my computer.

  Hello

  First of all, thanks a lot for taking the time to help me.

  After having tried everything you have suggested and have no chance and then by searching the Microsoft sites, Dell and SanDisk, I finally found a very simple solution that worked.

  Thought I would pass it for any future reference.

  The SanDisk site said to try this:

  Activation or forcing MSC mode on the Sansa player

  How to connect my Sansa in Mode "MSC" player or forcing MSC mode on my Sansa player?
   

  The steps below will force your readers Sansa Connect mode MSC on your PC.

  Sansa Clip Zip
  1. turn off the device.
  2 hold down the central button while connecting the device to the computer.

  Thanks again.

• Power outage Sansa Clip

  Hello

  I have a 2 GB Sansa Clip I bought about 4-5 years ago and have been very happy with it.

  He runs the version of the 01.01.30A software.

  However, recently and for no apparent reason suffering from power cuts.

  It would just turn off, no matter how much battery there left, how long it has been running or what he does. And when we turn on (which is sometimes hard to do) he can't remember the last thing he was playing.

  After further tests it seems to turn off when put under different angles, almost as if there is a piece on the inside that is open/close the connection. When shaking a slight ratteling inside there, but I can't be certain that's not making noise power switch.

  Of course, this looks like a hardware problem.

  So, how can I open it and fix it? Is there a diagram somewhere I can look at?

  Thank you

  Max

  Well, I opened it and looked around in there.

  True, the battery had detached from its adhesive strips and pulled the loose battery negative cable.

  Gently, I took out the battery and was able to resolder the wire and test that it works before you all shut up.

  My double-sided adhesive foam Strip seemed to be too thick, so I used a drop of silicone glue to prevent the battery from moving around.

  All together again once, case snapped back and forth between them well.

  A little notation around the seam is a small price to pay for a media player that fully operational once again.

  Thanks for all your suggestions!

• New Sansa Clip + not showing the track titles

  I recently got a new Sansa Clip + as a Christmas gift to replace my old (his helmet came out). I've updated to the latest firmware (even my old 01.02.18A,), and I copied my entire library of music from the old to the new player. Everything plays and works in the same way, except for one thing: on the new drive, the song titles never see the place, and the name of the file is always displayed during playback of a song. My old player would show the title of the song of the metadata instead of the file name during playback if it was available. I checked that the titles are actually there and were not lost through some freak mishap copy, so I'm puzzled as to why it won't work as my old drive.

  Anyone know of the issue and how to fix it?

  Well, Yes, that is my point of view. All tags are there, and all the rest (album, artist, etc.) is displayed in the main screen of the reading and the news section of track except for the title (who, oddly, has never had a track in any case information entry, but that is not the issue).

  ... well that, as strange as it may seem, the titles of the tracks seem to have returned - after, I moved music off the device to analyze the data volume to activate the Clip + Replay Gain. Really weird, but hey, it works now! (Maybe switch to the computer did it, since I initially copied it directly between devices?)

• Sansa Clip Zip battery does not charge, goes directly to the screen of the song

  It's my third Sansa MP3 players.  The first was a Sansa Fuze with the round button.  Like that one but my husband needed more that I did it I gave it to him.  He is old, but the player is still so today.

  The second was a Sansa Fuze + with the touchpad.  The touchpad has been way too sensitive but I need to play only two songs for sleep therapy while I was fine with it until the battery suddenly stopped charging a few months ago, I posted my problems in the Sansa Fuze + forum.  After trying a few suggestions, I finally accepted that he was a Goner.

  I bought this Sansa Clip Zip 4 G, thinking that should last at least for a while because I use every day.  In fact, I needed only when I had disorders of sleep during the night;  I probably used it once every two weeks or more.  I used my cell phone to the device, had no problems until now.

  The last time that I loaded it was 2 weeks, to 98% full - the thing never indicated 100% while it was a little weird.  In any case, I had problems sleeping two nights ago so I took out the Clip Zip and noticed that the battery still had plenty of juice left.  This morning I checked the battery, he had 68%, but I thought I needed could again tonight so better it load up, just in case where.

  I connected it to my computer, but it did not show "connected" screen  Instead, he went straight to the last song I listened to.  I thought it was weird so I turned off the player then tried again.  Of course, he went directly to the screen of the song.  I noticed that the battery icon was showing 'filler '.  I thought that if I left it connected to the pc long enough IT would eventually deducted.  Two hours later, I checked the computer and it says that the drive battery was dangerously low.  I disconnected and then reconnected and this time he said 98% charged.  I loaded a bit more just in case so I used the player for about 15 minutes and the player turns off.  Plugged into the pc and now it says battery is extremely low, while the last hours do not charge the battery, but it drains pretty!

  My last attempt was to plug into a wall charger and guess what?  He went directly to the screen of the song once again.  Contrary to connect to the computer, I could actually turn off the player but this way does not charge the battery, or.   It's exactly the same problem as my second player, the Sansa Fuze +.

  I bought the last two players from Sansa, simply because I really liked the first which of course had been abandoned a long time ago.  I don't know if I have bad luck or it is just an issue joint Sansa players but one way or the other I don't buy any Sansa more in the future.  He is a big name that comes with the big disappointment!

  You can also try a reset by pressing and hold the power button for 20-30 seconds. Release it and then turn it on normally and see how it behaves.

  By your description of the message "dangerously low" you get then plug it into your computer, which tells me that you use MTP mode on the player (or default automatic default, MTP). MTP mode can be pretty weird; better to use MSC mode unless you have need to PSG for "protected" content or DRM files such as Rhapsody or audio in your library or Audible books. The small "crirically" message is a bug in Windows 7 (using MTP mode) that Microsoft did not consider important enough to fix.

• SanDisk Sansa Clip + 4 GB MP3 player with FM Radio

  Hello-

  My new sansa clip + out of the box and I'm not able to do Radio FM works.  Battery is charged.  All I get on screen is a set of headphones and the 'music '.  I do not expect to play music because I have not yet loaded, but I expect to be able to get FM radio but can't seem to get there.  Any suggestions on how I have to happen?  Thank you.

  Please note that I do not see a menu of items to select from the MP3 player.  I do not see a "lock" or "unlock".

  My computer recognizes the drive as a new piece of hardware.

  The reader does not recognize the software on the CD when I put the CD in the computer.

  The player does not allow me to make the software what I t hink is the "root directory" for the player.  I guess tha the directory "root" is the "Sansa Clip + 4 GB" or the "internal memory".  It allows me to copy in one of these.   Appears as:

  + The Sansa Clip + 4 GB

  -Internal memory

  + Albums

  + Audio books

  + Music

  + Playlists

  + Podcasts

  + Records

  + Service

  My D drive that reads the CD has these files it contains:

  Autorun.inf and sansa - install .exe and one other file that reads:

  fscommand with these files it contains: dloadrhap.exe, dloadrhap.txt, proxy.bat, proxy.exe

  If I do not have need of these, please let me know.  I don't want to stuff more then I need to run the player.

  I'm assuming that I need only the files autorun.inf and the sansa - install .exe.

  I do not understand what is Rhapsody or why I need.

  Thank you.

  Bonnie

  Now, don't laugh at this suggestion, but: when you get the player, there is a transparent plastic sticker that was placed on the screen of the player, which has a screen simulation showing the items that describe you see on your screen - have - you, you take off the sticker? (It generally is a small tab on the right side of the tile to help with that.) Once you do this, the player I hope will begin to operate as expected. On the CD, you don't need at all! The CD is required to use the separate music Rhapsody and optional subscription service (for which you pay every month, after a free trial, usually). If you do not want the service, go to the CD. Finally, you should check and see if your drive is the latest firmware - look under settings to the player and to compare this version number firmware recent listed in the upgrade thread Firmnware sticky at the top of this forum. If the thread here has a more recent version of firrmware, recommended that you upgrade to it-, it is very easy to do. I hope this helps!

• 4 GB sansa clip + songs

  have 4 GB sansa clip + it only has 330 songs and says its almost complete, what did I do wrong charge off the coast of the ps3. is there something I got wrong im new to this 1st mp3 player part any help would be thank you very much once again. He plays all of the songs on it now

  You didn't say what format the songs were in, or how fast they were. If you load format FLAC or WAV (as opposed to the format mp3 for example), then I could see where your memory may be full.

• Before I buy my sister a sansa clip

  Lately my sister thought about purchasong a new mp3, why? She wanted something small like the iPod Shuffle which can be attached to the collar of his canvas. However, the dilemma was between several actors:
  * The Sansa Clip (with all the hype media round her, how could I miss?)

  * Creative Zen Stone Plus
  * iPod Shuffle (I hate iPod but I heard he's a good player)

  One that I thought would be the better was the clip since Zen does not support Hebrew and since the shuffle is not at all a screen. However test one of the video for my friend made me realize: the output Volume is poor!

  I use Senheisser CX500 headphones, the thing about these headphones is that they need a lot of output to achieve volumes would need other (headphones Boxed/Cheap)... Affecting the High Volume and lift things in the EQ solved the problem (it actually blew my ears) for these music rock/metal/etc. However listening to the 'Stairway to Heaven' in a crowded bus would be impossible. In these cases my sansa view would giggle that I would raise even higher volume. The clip could not even show a "sorry" on the screen...

  I do not know the shuffle, but I now have the stone more (one of my friends has one with speaker) has a lot of output volume to play with, and before you buy her a player or the other I wanted to now if there is a firmware update or a specific model (maybe 4 GB clip) above the problem of volume output.

  Oh and BTW, she already has a pair of Senheisser CX500 as well and the idea is that she ould have a player who can cling on her necklace, so please, no 'buy these headphones' or 'buy an amplifier... He would miss the point...

  Thanks in advance,
  Yaacov

  LoK_fanboy wrote:
  His song was torn off an original CD at a decent bitrate and sampling... One thing I hit: you said that you have 2 units of 8GB... The first models of the clip had only 1 and 2 GB (my friend has a 2 GB), leaving me to believe that they overcame the problem on templates later, or perhaps the same update firmware supporting FLAC overcame the problem of output, is there a way to check?

  The firmware is periodically updated and improved.  I wasn't even my units before the firmware upgrade to the latest version, after purchase.  Even if there was a problem of release (which I doubt) upgraded to latest firmware would solve all of the problems have had previous versions.

  I can only speak as a happy consumer.  I have 4 Sandisk products: rockets from 2 to 8 GB and clips from 2 to 8 GB and the output is very good with all 4.