HP 1050 j410 series: scratches when printing

Similar Questions

• HP deskjet 1050 J410 series: first levels in hp deskjet 1050 J410 series ink

  I'm unable to check levels of ink on my printer hp deskjet 1050 J410 series.

  I have always used the following method worked well, but WILL NOT WORK today!

  Past the method: -.

  1. click on Control Panel on the desktop

  2. right click on the printer icon.

  3. click on keep your printer (to get the dialog box containing the estimated ink levels wording.)

  My problem:-I cannot find anywhere MAINTAIN YOUR PRINTER formulation that would allow me to access the dialog box mentioned in (3) above.

  Can anyone help please because I am at the end of my mind, I searched everywhere to no avail on the computer for a

  solution!

  Thank you very much.

  Joe

  The steps described in the paper here can help find the ink level for your HP Deskjet 1050 j410 on Windows 8.1.

• I am trying to install a hp deskjet 1050 J410 series but I have have the disk what can I do to install it?

  I am installing a printer hp deskjet 1050 J410 series I have no disk, what can do?

  driver 32-bit:

  Microsoft Windows 7 (32 bit)

  64-bit driver:

  Microsoft Windows 7 (64-bit)

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• HP Deskjet 1050 (J410 series): impossible to install the software/driver of printer for laptop Windows 8

  Hi, I tried to connect my laptop (Windows 8.1-64-bit) on my printer (HP Deskjet 1050 all-in-One J410 series).  I tried to install the printer using the CD that came with it, but it shows a message "not compatible with this operating system". After reviewing previous questions here, I tried to download the software driver for this printer. None of these files have no effect with some presenting a message saying that the device must already be installed on the laptop for it to open. Anyone able to help?

  Thank you!

  Hello

  Please download the following installation package, save it on your computer (remember where) after this fight, click on the downloaded file and run as administrator.

  http://ftp.HP.com/pub/softlib/software12/COL32611/al-109412-3/DJ1050_J410_1313-1.exe

  Your printer has only USB connection:

  http://support.HP.com/us-en/product/HP-DeskJet-1050-all-in-one-printer-series---J4/4027462/model/4027464/document/c03775352/

  So ONLY plug the USB cord/cable when the installation process asking.

  Kind regards.

• Mac OS 10.7 LION? for the HP deskjet 1050 J410 series?

  I need driver/software for the HP deskjet series 1050 J410 for use with Mac OS 10.7.2 LION.

  I need the function of scan, print is not a problem... Please HELP...

  Hello

  You can download the full feature software below:

  http://FTP.HP.com/pub/softlib/software12/COL39593/DJ-96583-1/HP_Lion_Ink_SW_v12.13.17.dmg

  Follow the steps and select your device, be sure to check the HP recommended software in the Installation Type step to install the HP Application Scan 3.

• My hp deskjet 1050 J410 series is not compatible with windows 8?

  I downloaded the new drivers and I am able to print with my printer HP deskjet 1050 J410 but I am not able to scan anydocumants. I can't open the HP printer Assistant window. The error reads as follows:

  Adobe reader software cannot open HPSPProgress.hta because it is not a supported file type or the file has been damaged (for example, it was sent as an attachment to e-mail and has not been correctly decoded).

  I don't know if this has to do with my default programs or what happens. I am currently using 8 64-bit windows.

  Thank you

  Hello

  The doftware is fully compatible with Windows 8, the question appears because of the wrong configuration of your operating system to start the HTA with Adobe Reader files wrongly.

  Follow the steps below, this should solve the problem:

  1. Click the Windows (the key with the Windows Logo) key + keys X, and then open the Control Panel.
  2. Select programs.
  3. Under default programs, select make a file type always open in a specific program.
  4. Lecate and double click in the list .hta (HTML Application will appear in its description).
  5. Select Microsoft (R) HTML Application Host.
  6. If such an option does not appear, click Other Options.
  7. Click find another app on the PC at the bottom of the list.
  8. Navigate to C:\windows\system32 and select mshta.exe
  9. Click on Open, close all windows and then try to open the HP software.
     

• HP Deskjet 1050 (J410 series): unable to establish two way connection printer

  Hello

  My printer is connected to my laptop via a USB port and provides ink level readings. It will not print any documents or test pages and when I try to align/clean ink cartridges a message "Unable to establish two track with device connection".

  Can someone advise me on how to solve this problem as soon as possible? Thank you!

  Hello @West__44,

  I would like to help you today to correct the problems of two-way communication that you encounter when using the USB connected HP Deskjet 1050 all-in-One printer on your computer Windows 8.1. Because you get this error via a USB cable connection there are likely a driver or software conflicts between your HP Deskjet and your Windows computer. Can I please you follow the steps below to resolve this issue.

  • Please, unplug your USB cable from your printer and your computer before you continue.

  Step 1: Remove the driver:

  For the purposes of troubleshooting, it is essential that we have a clean slate to work with. Therefore, I will be having remove you all traces of your HP Deskjet from your computer in Windows before you run the hotfix.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type programs and features. Click on programs and features to start.
  3. Under the window programs and features will populate a list of the programs installed on your computer. Please scroll through the list and select your Printer HP Deskjet. Click Uninstall.
  4. Please follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete, proceed to the next step.

  Step 2: Remove temporary files:

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard, to the right of the Ctrl key.
  2. On the start screen, type run. Click on Run to launch the run dialogue box.
  3. In the run box type %temp% , and then click OK
  4. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin. Please proceed to the next step.

  Step 3: Install the device:

  1. Please click here to download the package full feature software and driver for your HP Deskjet printer.
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. Do not connect the USB cable until the installation program invites you to
  4. On your laptop, please make sure that the USB cable is plugged directly from the back of your printer to the laptop. Avoid USB Extenders and home stations as they can cause conflicts of USB communication.

  Once the installation is completed successfully, please test print to confirm that the problem has been resolved.

  Please reply to this message with the result of your troubleshooting. Thanks for joining the Forums from HP Support. I can't wait to hear strings attached good luck!

• DeskJet 1050 J410 series: 8.1 Windows & Deskjet 1050 J410 series all-in-One Printer/Scanner

  I just took delivery of my laptop Lenovo (windows 8.1) & seeks to activate/use my printer Deskjet 1050/Scanner. I am informed that the Deskjet software is installed BUT I can't progress further. I searched HP Scan & Capture screens & read the "ratings & reviews" (they are not easy reading!)  BUT cannot find how to progress further, between all of this "irrelevance", it seems to me information.  Everyone there to advise me

  Hi @RACONTEUR

  I'm not sure I understand. You say "I am informed that the Deskjet software is installed BUT I can't progress further," what you're doing now, but can't?

  While I wait for you, please use the print HP and doctor Scan. Printing HP and doctor Scan is a free utility (tool) that allows to quickly solve common printing, scanning and connectivity problems, including but not limited to:

   

• DeskJet 1050 J410 series does not Excel files print

  My printer does not print Excel files.  I have read some other posts that suggest to reinstall the printer driver I did.  My printer print Excel for awhile and then a few weeks later, it will not print again.  There is no error message.  The print queue displays a document to print, then just disappears.  I guess I will upload once againprint driver, but I don't understand why it keeps doing it.

  Hello

  Please uninstall the driver first by going to control panel-> programs--> programs and features, and then UN-installing from there.

  Download the latest driver full features software (please correspond to the version of the OS system pilot & 32 bit / 64 bit with the system and the PC OS).

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&swItem=Al-109412-2&mode=4&IDX=1&JumpID=reg_r1002_usen_c-001_title_r0003

  Re-install the software downloaded and see if the problem still persists.

  I hope this helps.

• HP Deskjet 1050 J410 series: printer cd XP update to 8.1

  My pc has just been updated to Windows XP to 8.1, but the cd that came with my printer does not work with the update. Download an updated version? The one I have is version 20.0.0. Thank you

  Hello

  I'm glad to hear that your problem is solved and everything works fine now.

  Good day!

• HP Color Laser Jet CM6040: scratches when printing CM6040

  I have a very annoying problem with my print quality which causes the color to the burrs. Whenever I have print something on my laser jet CM6040 color it leaves a strip of color at the top of the page that spots and affects all pages.
  Recently it was also printing this band at the bottom of the page that you can see in the picture as an attachment. It tends to be worse in the morning when I get to work and first print something and tends to be bad after sitting idle for a while. We have installed a new fusion kit fairly recently so would avoid buying another so soon.

  Can anyone help or everyone knows that before?

  Think about how the image is made on paper. The flow of paper to the top of the side of the printer tray and a secondary transfer roller moves the image of the belt (just the little strip of paper feeds more) in order to fill the document with the complete picture. Continutes to travel at the front of the belt is a wiper brush that removes the residual toner was not transferred to the book and the back side of the belt if another page is printing is the image placed on it as the belt moves on the toner drums. If the belt has a defect in the Wiper Blade, excess toner that is a mixture of all colours (usually purple in color) out of the end of the belt like a streak. That's what I think happens for you. Now one thing you can try who works occasionally for me is to spend about 1 inch belt in the opposite direction, which will expose a lot of toner on the belt. Clean the toner and then advance the belt (always use the edges of the belt to move) and then look below where the belt comes out from the front and see if the line is still present or that it is a party. If passed, then the blade may have corrected itself. If the lines are still present, the blade is bad and the belt needs to be replaced. The cost of the belt is high. You could contact a company like metrofuser.com that may or may not sell belt given to nine for your model see if they have your model in stock. The cost is generally 1/2 of what you have to pay for a new belt, but you will need to return the old belt to them.

• HP Deskjet 1050 J410 series

  Hello

  This is my third message for the same object buy unanswered.

  Here is my problem, the print quality is off I can not change project or better

  

  anyone here can help

  Hi 3absiso,

  Follow the instructions below.

  1. open devices and printer

  2. click on add a printer

  3. click Add a local printer

  4. from the use existing port, select the USB option and then click Next

  5. click the button of Windows Update to get all the support window 7 drivers updated

  6. once the update is complete. Click HP from the menu on the left, then select the printer Deskjet 990c in the right menu, and then click Next.

  7. follow the remaining instructions to complete the installation.

  Once you have the printer added 990c make sure it is the default printer, and then try to print using this driver for the Deskjet 1050 printer.

• HP Deskjet 1050 J410 series: driver missing

  My printer has previously worked with my laptop. Due to problems I reset the PC to factory default. The printer device driver is missing and the printer will not work. I don't have the original disc supplied with the printer.

  Hello

  Please download the software and driver from following link and install it on your computer:

  http://ftp.HP.com/pub/softlib/software12/COL32611/al-109412-3/DJ1050_J410_1313-1.exe

  Kind regards.

• I lost my cd foo HPdeskset 1050 J410 series

  How to get a copy or how dowlow?

  Hello:

  Please select the operating system you use the link below and download and install the full features of software file and the driver.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4027464&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=4027462

• HP Deskjet 1050 J410 Printer series with windows 7 - installation problem?

  Good evening
  I just bought a new printer HP Deskjet 1050 J410 series with windows 7. I installed it... with many problems... whenever it is said that the driver could not be found... but in the end, it is installed. The scanner works fine. While the printer is blocked... When I clicked on the resolution of problems, the message I got was:
  HP Deskjet 1050 J410 series doesn't have a driver.
   
  I uninstalled and reinstalled 3 times and the same problem persists. I don't understand what that means. Should I please?
  Thank you very much for the help!

  Make sure you have the latest and correct the driver for your operating system.

  HP Deskjet 1050 All - in - One Printer series - J410

  http://h20000.www2.HP.com/bizsupport/TechSupport/ProductList.jsp?lang=en&cc=us&TaskID=135&prodSeriesId=4027462&prodTypeId=18972

  Try right click on the actual Setup.exe and choosing the option "Run As Administrator"?  Perform, even if your user name is an administrator.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135