HP 15-d020ek Mode fixed!

Similar Questions

• HP Pavilion g6-1313sh Notebook: dual Radeon graphics card - cannot enter bios mode fixed

  Hello!

  I recently bought this laptop apart from my friend and is struggling with this for a few weeks now.

  I was on the forum every day for a few hours without result.

  so, my laptop is HP Pavilion 1313sh g6 with Win7. I have the latest version of the bios, so I could put my gpu bios mode set instead of dynamic.

  Here's the problem... When my setting was dynamic, I got the "switchable graphics" option and I could put the preset by application. as many people pointed out, it really does not work, so I went back to fix.

  This option is now missing. so I tried in CCC, following this: http://support.hp.com/us-en/document/c03048374 in the fixed bit.

  It is, I have no change option... I only get the graphics card AMD Radeon Dual 'activate' or disable... but not the button to switch permanently to the highest performance card... checked in CCC, it recognize my 2 cards under hardware (1st HD6520G 2nd is Hd7400M).

  I start to tear up the rest of my hair. Please can someone tell me what I miss? as said, the most recent drivers from the site is all settled.

  Thank you!

  Hi @SmokeyJohnny ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion g6-1313sh Notebook and issues with graphics switchable. You can do a System Restore. System Restore will help if something is automatically updated and wasn't on the laptop.

  When running a system restore note remove all USB devices. Disconnect all non-essential devices because they can cause problems.

  If this does not resolve the problem would be to uninstall the graphics drivers listed in your device manager. Reboot the laptop and it must be reinstalled the proper drivers. Yours is the AMD Radeon HD 6520 + 7450 Mr. here are your drivers if you need.

  I hope this helps.

  Thank you.

• Restart in safe mode fixes my problems. How to diagnose the source of the problem?

  Drop-down menus do not work. I type and nothing shows in the drop-down list. I select something, and Firefox crashes without showing the selection. If I maximize full page, he says. If I type in the same or another dropdown menu, even when it does not, until I reduce the page.

  Restart Firefox in safe MODE and everything works fine. Reboot in normal mode and problems reappear.
  How do I diagnose what is causing the problem?

  Hi Billamicasr

  first try to disable hardware acceleration and check again

  See also: extensions, themes, and issues of hardware acceleration to resolve common troubleshooting Firefox problems

  Thank you

• How to keep the tables in mode fixed?

  Don't know about you but I'm not used to the fact that available in many 3.5.3. moves horizontally and vertically. It distracts me a lot, especially with the touchpad on my Macbook Pro. Is there a way to get rid of this automatic void of white on the sides and bottom. If the table is small, there is no need to make "wobbly", don't you think?

  Someone at - it an idea?

  Hi BassPlaya,

  I think that what you are wanting to do is to reduce the size of the painting that arrays of numbers are sitting on.

  As I know there is no way to do. You can drag the table upwards and to the left, but do not stop when the yellow guides appear or hide you the first lines/colomns and be unable to view/edit the.

  I found this problem bothers me is no longer on the Mac-I set my scroll automatically.

  Quinn

• PES 10 times Organizer and editor crash on multi-core hardware. set the processor affinity unique mode fixed

  As I pointed out in thread http://forums.Adobe.com/thread/941128 I found the editor and organizer for PES 10 crash in basic multi environment, I'm WIndows 64 bit, latest updates (including sp1), I had the same problems with Windows 7 32-bit.

  Workaround is to set the affinity to a single processor.  From the Task Manager, select the "processes" tab, find the exe (for example PhotoshopElementsOrganizer), right click, select "set affinity...". "and reduce the number of CPUS selected (checked) for a single.  (Under different versions of Windows specific means vary, but the basic steps are the same).  It doesn't matter what cpu choose you, but if you are the editor and organizer, put it on different processors.

  Pretty much everything these days being multi-core material, my hypothesis is that Adobe test in a virtualized environment and therefore do not discover this type of unreliabillity.  Adobe really need to test their software further exactly the same problem exists in PSE 6, is hardly new to them.

  The solution is in what precedes.

  If Adobe read this, they should take note that a virtualized environment does not provide a decent systems CPU multi-core fidelity emulation.  The ONLY way to test the reliability of an application is on REAL hardware.

• Switchable Graphics - mode for Pavilion m6-1009TX fixed?

  I just bought a Pavilion m6-1009TX who has switchable graphics (Radeon HD 7760 m). Is there a fixed mode? I've updated the BIOS but does not appear.

  I also have a Pavilion dv6 (w / a Radeon HD 6770 m) that I managed to put in mode fixed (flashed BIOS)

  I hope / expect M6 would be the same

  Hello

  Please check using the following link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=en&cc=us&ObjectID=c02731962&JumpID=reg_R1002_USEN

  Kind regards.

• Computer stuck in safe mode

  I called Lexmark printer wouldn't align and they consulted my comp. and then said nothing was wrong with is access to my comp. foreign companies and wanted to charge me $790.00 to solve the problem through Microsoft. I refused to do. Well the guy disconnected from my computer and now I have this thing 'safe mode' on the computer and in very large print. I went and tried to fix it and he can't find anywhere. I want to uninstall, but it cannot find in files. Can someone help me?

  Original title: safe MODE

  See if that helps - http://www.tomshardware.co.uk/faq/id-1820767/windows-starts-safe-mode-fix.html

  If all goes well, it can allow you to solve the problem.

• After several hours of time, BSOD and it asks to run without failure or normal screen mode

  Hello

  I had this problem for a month, after 1 to 10 hours from the time of execution (occurs to me after an hour or half a day)

  my computer hangs just to the page black screen in safe mode, no errors or anything, even when I run back normally.

  Ive been looking around for quite a while now, try bugs from various websites and suggestions.

  I type of major changes to the system that I did the last half a year.

  Accident can happen in playing a game or even your browsing Firefox. Maybe she took place even though I did not use the computer, came back, and it was restarted. Things I suspect is either faulty RAM, perhaps poorly applied thermal paste on the CPU fan cooler? The two monitors that I have connected? Insufficient for new updates that are listen below cause the PSU stress itself? Tests I've tried on the stress after an hour of running time, I can not stress just before the cause of the accident that I don't know when it will happen. May be peaking suddenly what related material.

  More news a few months (more) I installed a Neovo 19 "F-419 19 inches in addition to my SAMSUNG 24" syncMaster B2430L display screen:, my main one is the 24 "one.

  New its add-on card: using an extra sound card that works OIC Configuration Audio-3D, 3d Audio Engine: Xear3D, Audio CODE: CMI8738, worm 7.12.8.1740. Looks like an old, I tried looking for program updates but has not been successful. Using this soundcard for its 4 jacks 3.5 mm for use headphones 5.1 surround.

  Computer specifications previous (two years, installed in the laboratory of the shop where I bought it):

  PSU: HEC 600W 12CM FAN A.FPC WIN + 600

  CPU: Phenom II 955 Am3 AMD Q.C.

  MOBO: GA790XT-usb3 Am3 + GIGABYTE AMD

  GPU: ATI Radeon 5770 1 GB-5 MSI

  HD: 500 GB 7200 16 MB SEAGATE Sata2

  MEMORY: VALUE GEIL 2x2G (4 GB) DDR3 1333 MHZ

  DVD: AD7240S SATA SONY OPTIARC DVDX24 DL

  OS: WIN 7 HOME PREMIUM 64 - BIT ENG

  Specifications of current computer (I installed all of these additional components myself with a friend, checked everything twice recently):

  PSU: HEC 600W 12CM FAN A.FPC WIN + 600

  NEW * CPU: Intel Core i7-3770 3.40 Ghz

  MOBO * NEW: MSI-7798

  GPU * NEW: Nvidia Geforce 660 Ti MSI

  HD: 500 GB 7200 16 MB SEAGATE Sata2

  MEMORY: VALUE GEIL 2x2G (4 GB) DDR3 1333 MHZ

  MEMORY * NEW: 2xKingston 2 GB DDR3 1333 Mhz Pc3 - 10666 that was added in addition to the previous Ram

  DVD: AD7240S SATA SONY OPTIARC DVDX24 DL

  OS: WIN 7 HOME PREMIUM 64 - BIT ENG

  Things I've tried:

  You use check to highlight my drivers, he did cause a blue screen and my computer has not started. I didn't know how to proceed from there however.

  Stress tests my CPU, GPU, PSU temperatures were not unusual or high. Downloaded my MSinfo32, DXDIAG and my last crash DUMP in this link, the rar file. http://rapidshare.com/share/84E3783BE3B66979375E6D2B2C2E7A56

  CCleaner ran in safe mode, fixed broken files and etc. "."

  A ran AVG in Mode safe, Full scan both hard drives. Nothing found.

  My computer case is half open, helping the ventilation and verification problems with cables that are not connected correctly.

  Uninstalled all unnecessary programs.

  Posing this thread.

  If you need other information that I forgot to mention, please tell me that I will do my best to post it here.

  Thanks in advance to all who read this.

  Hello

  The attached file of the DMP is to bug checking DRIVER_VERIFIER_IOMANAGER_VIOLATION (0xC9) .

  This is the verification code bug for all the Verification of i/o Driver Verifier violations.

  Cannot load the image dtsoftbus01.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for dtsoftbus01.sys
  ERROR: Module load completed but symbols can be loaded for dtsoftbus01.sys
  Probably caused by: dtsoftbus01.sys ( dtsoftbus01 + 1360 )

  -FAILURE_BUCKET_ID: X64_0xc9_23e_dtsoftbus01 + 1360

  Driver found dtsoftbus01.sys auditor perform invalid function calls, causing the corruption of the system. This is the driver for Daemon Tools. Daemon Tools is a very popular cause of BSOD in 7/8 base systems. Please uninstall Daemon Tools. Alternative imaging programs are: MagicISO, Power ISO, etc.

  Kind regards

  Patrick

• kinda weird police

  Hello.

  Since a previous update, my font looks like this:

  From safe mode fix, but when I try disabling plugins/addons/extensions remains. What can I do?

  Thank you

  This could be related to hardware graphic acceleration, a feature that improves, but still has some problems.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Orange Firefox button or classic menu Tools > Options > advanced

  In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.

  Who help me?

• Firefox does not attempt to remember the passwords even if I click the "Remember" button and I didn't erase the passwords etc. memory of passwords

  Security is set to "remember passwords" and privacy settings does NOT erase passwords. When I go to connect to a site of the bubble 'Remember password' is displayed, but does nothing when I click on "Save password". He hang around for a few seconds then disappears. When I come back on the Firefox site does not enter my username and password but still asking if I want to remember the password.

  If starting in safe mode fix then try this:

  It is possible that there is a problem with key3db and signons.sqlite files that store the encrypted names and passwords in Firefox.
  
  Rename signons3.txt and signons.sqlite files in the Firefox profile folder.
  
  You can add .old files (key3.db.old and signons.sqlite.old) names or move them to another folder to make it possible to cancel the action.
  
  You must define a new master password after renaming or removing the signons3.txt and all the currently saved passwords are lost.
  
  If that worked, then you can delete the renamed files that are no longer needed.
  
  
  
  See:

  • "Troubleshooting" in http://kb.mozillazine.org/Password_Manager

• Pavilion G6 1304SM: not updated for Win10, AMD graphics card causes serious productivity issues

  Hello.

  I bought my laptop around August 2012. A week ago I updated my computer laptop Windows 10 x 64 to Windows 7 x 64 operating system. Then I did a clean install of Windows.

  I got almost all the driver through Windows Update software. However, the driver for my graphics (Intel HD 3000 + AMD Radeon HD M 7450), I received is defective.

  In Device Manager, the AMD graphics card is referred to as "AMD Radeon HD 7000 series" instead of "AMD Radeon HD M 7450" (the way he recalled on Windows 7).

  On the site Web of the product on hp.com, where I used to see a large list of all downloadable drivers, specially designed for this computer, HP only pasted a label reading "Windows 10 drivers can be downloaded via Windows Update."

  Running in graphical mode fixed, AMD is shown with a yellow exclamation point in Device Manager (I tried to update, but it says I have the latest version). I can't disable the Intel card, otherwise I'm stuck with a resolution of 800 x 600.

  In dynamic mode (the one I'm used to working on), I used to set which application uses what GPU via the Catalyst Control Center. However, now when I do that, if an application is set to run under AMD GPU, it never starts. (It will allocate about 30 MB in RAM - visible via the Task Manager - but will not open the main window). If I change the GPU to Intel, the slopes of the app, but under limited return capabilities.

  I use extensively chart AMD. Not being is not able to use it causes problems of great productivity for me. Are there possible solutions for me, not to mention that roll back to Windows 7?

  Hello @tbc3434,

  Welcome to the Forums of HP Support!

  I read your post on the switchable graphics and wanted to help you!

  You can try to download graphics drivers for Windows 7/8.  If you're still having problems, then you can opt to go back to a previous generation option, in your system settings:

  HP Notebook PC - upgrade to Windows 10

  Once you return to your original operating system, check to see if you encounter the same problem. If this isn't the case, then you can consider holding off on upgrading Windows 10 until the drivers can be updated.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Satellite Pro M70: the screen is blank after plugging AC adapter

  When the low battery alert lights and I plug in the power adapter, quite often, the screen turns white and the keyboard does not work. The only option I have is to turn off and turn back on it.

  Does anyone else have this problem and if so, is there a solution for this?

  Hello

  This looks like something wrong with the display driver.
  Please, try to disable powerplay in the properties of the graphics card and do not set the CPU at low speed in Toshiba Power Saver mode fixed.
  Check this option.

  Maybe it helps.

• Satellite Pro M70 usually power up when the AC

  Hello

  I bought my dad a Satellite Pro M70 for his birthday and it was used for about 3 months. All of a sudden without any reason that it not power up if it is not connected to the AC. The battery registers itself as 100% charged.

  When on AC, everything is fine no problem.

  But when it is not plugged into the AC, it lights. When put under tension however you can unplug the AC and it will all work very well again.

  Any ideas?

  Should I try a BIOS update? or does anyone have any other suggestions?

  Thank you
  Martine

  Hello

  This problem appears at the beginning?
  Sounds a bit like electroninc power supply malfunction and in this case, you should always ask the service provider to Toshiba for assistance.
  Don t worry, seems, the guarantee is valid and each procedure must be done for free.

  But I m interesting if this will help you:
  Please, try to disable powerplay in the properties of the graphics card and do not set the CPU at low speed in Toshiba Power Saver mode fixed.
  Check this option.

• Cannot display Flash objects in Google Reader

  Hello world

  This is a weird question, I've been struggling with, since a few days - Flash objects do not seem to load in Google reader.
  If I open the original page, they charge however.

  So I tried these:

  • Tried to reinstall the plugin Flash - did not work
  • I started Firefox in safe mode - fixed! -I could see all the Flash objects
  • I disabled all my extensions - does not solve the problem
  • I have reset Firefox for the default settings for the user - not the problem
  • Tried to make a new profile - does not work either

  What's another safe mode do really? What Miss me? Any ideas?

  Thank you!

  In Firefox 4 questions Troubleshoot Firefox in Safe Mode disables extensions and disables hardware acceleration.

  Turn off hardware acceleration:

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

• I have to click twice in the google search before I can enter anything

  When I go to the start page of firefox I have to click twice on google for me to type anything

  I recommend trying to start Firefox questions to troubleshoot Firefox in Safe Mode and see if the problem exists also when started like that. If Safe Mode fixes it, switch your modules one by one to see which causes.

  Please let us know how the above work, and if we can be of further assistance.