HP 15 Notebook PC TS: Freezing, blue screens and 100% use of the disk.

Similar Questions

• Last night, my laptop that runs windows xp blue screened and says something about the queue

  original title: help solve a mistake, please on windows xp

  Last night my laptop that runs windows xp blue screened and says something about the queue and to bring the computer out of which I did. I just tried to turn it on an hour ago, I use it now, and I got a message saying he had recovered from a serious error and I wanted to report to microsoft? I clicked Yes, but unbeknownst to me, I had no internet connection at the point of having to re-enter my our Verizon router WEP number in this laptop. I essentially self-taught myself much on computers that tell you, I'm not really computer literate, but if you can point me in the right direction, I can very well do. This is where to ask my question/problem. I went in the event viewer and found this error/explanation: Index information is corrupt and Indexing Service cannot re - index the content automatically. User action: stop and restart the indexing service using the following command:

  SC stop cisvc

  SC start cisvc

  Can someone tell me please how to do this?  I think I know, but I'm really not sure so please help... Thank you

  It really seems to me as if you had a temporary problem which has now disappeared and that you probably do not need to do anything.

  However, please click Start, and then click Printers and faxes and report what, if anything, you see in the window that opens.

  If you don't see an icon for the printer that you think should be there, you need to fix this.  On the other hand, if your printer icon is there - or if you do not have a printer attached to your computer - you need not do anything.

  If you want your computer to be a little faster and at the same time save space on your hard drive, read the LifeHacker article I linked in my previous post.  However, you need not to do, and you can erase [probably] regardless of the index corruption has occurred by starting and stopping the Indexing Service (cisvc) by entering commands in a command prompt window that I described.

  Yet once, you don't need to change your encryption WEP to WPA or WPA2 wifi, but doing so will make your network more secure wireless.  If you want to change your encryption, you would start by changing the configuration of your router from Verizon.  You should be able to find detailed instructions on the Verizon support site.  I don't know if you have Verizon FiOS or Verizon DSL service; This is a page of relevant support FiOS--> http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/Security/124980.htm

• Blue screen and auto resumes on the coming of hibernation - XP service pack 2

  I use XP Service Pack 2. The system enters into automatic hibernation, and when I have one - hibernation ", either by reopening the laptop or presing the power button, the operating system begins to awaken and then I get a blue screen error and he stops and restarts." When I connect, then Windows tells me that the system has recovered from a serious error. It is never used to do this, but now it's whenever it hibernates.

  Any advice on how to fix this?

  Hi Flyguynw,

  What exactly is the STOP error message you get when returning from hibernation?

  Article has similar symptom documented. See if the solutions help you to fix the problems of hibernation.

  How to solve the problems of hibernation and standby in Windows XP
  http://support.Microsoft.com/kb/907477

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My hard drive was partially destroyed in an episode of the blue screen and I used the CD of Microsoft Windows repair to reinstall it on my HARD drive and since my keyboard everything upside down.

  CONT... It is no longer a sign U.K pound Stirling (or I can't find it because it not where it should be) also sign other keys are mixed up, i.e. @ and "reverse about, as well as to sign other keys are mixed up. It wasn't like this before that the HARD drive has been erased and I reinstalled with M-soft repair CD. Why is this happening? and how to fix it? My PC is Hp compaq d530 usdt and I use a sonic usb mouse & keyboard. The operating system is XP Pro. Also is it even than the standard US keyboard? If yes why it confuses my keyboard as a U.S. keyboard when I live in the UK?

  Check this box:

  http://forums.techguy.org/Windows-XP/674417-solved-key-board-key-not.html

• Windows Vista 32 on Netbook MSI, I plug in the power adapter and a few minutes later get blue screen and restarts of netbook.

  I installed windows vista on my MSI Netbook and I did all the updates of windows.  After the 2nd service pack if I unplug the power and plug it later back I get the blue screen and restart. Let the blue screen so quickly I can read just debug USB driver or something. I tired it in safe mode, and it does not occur in safe mode. Can someone help me?

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=you want="" this=""> ). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Y at - it virus? -Causing blue screens and random reboots

  Y at - it of viruses out there that are affecting the computers and blue screens and random reboots of the origin?

  There is, but your problems could be caused by other issues too,

  Tell us the information on your computer and we give information about the problem.

  you do something specific when you get the blue screen?

  you have anti-virus (what kind)

  did you install any software/hardware recently?

  a good way to fix a wide variety of pc problems is to run a chkdsk

  1. Hold the windows key
  2. Press R
  3. in the box that opens type of command, press enter
  4. type the following echo Y | CHKDSK C: /r
  5. Restart the computer

  It will scan your hard drive for errors that can be caused by being improprley stop, as when the death bluse screen occurs.

• 11.0 Adobe goes to blue screen and is now a flicker of the screen

  When I run adobe 11.0 that is loaded on the terminal, that he goes to the blue screen and now my screen flashes.   What should I do?

  Hi Bob,

  Thanks for posting in the Microsoft Community Forums.

  It would be more useful, me if you answer these questions.

  1 Windows operating system you are using?

  2. are you blue screen only with the Adobe program?

  I want the season to follow the article provided to solve the problem.

  Resolve system errors, freezes | Windows | Adobe software

  http://helpx.Adobe.com/x-productkb/global/troubleshoot-system-errors-freezes-Windows.html

• Blue screen Crash webcam plugged during the conversation live call video windows

  Whenever my webcam is plugged in a conversation in windows live, to allow us to start a video call, it causes my computer crash blue screen and closed.

  It did not used to do this, and we do not know why?

  We use Vista and the WebCam is a model of Delux from Logitech:

  M/N: V-UBG35, V20

  I tried uninstalling and re - install the WebCam software, but it makes no difference.

  Thank you very much for any help you can give us!

  AppleRight

  Hi pgard,

  1. did you of recent changes on the computer?

  2. what software do you use for video conversation?

  3. What is the error message that you receive in the blue screen?

  It seems the webcam must update software or good version of the driver must be installed.

  Check out the links and try the steps mentioned below.

  http://forums.Logitech.com/T5/video-chat-applications-non/BSOD-for-notebook-webcam-Deluxe/m-p/68910

  http://forums.Logitech.com/T5/webcams/computer-crashes/m-p/118452

  If fails it step above, they are checking in the case where the newspaper for the cause of blue screen of death and post back with the details.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  For additional support, post your request in the forums of Logitech using the link below.

  http://forums.Logitech.com/T5/webcams-video-calling/CT-p/webcam_video

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The matching blue screens and random reboots/crashes.

  Greetings. A year ago, I built a new computer, including the following parts:

  AMD Athlon 64 Dual Core 89W

  Motherboard ASUS M3A78 Pro

  Seagate Barracuda 7200.10 250 GB Sata internal HD

  4 GB of Ram DDR2 (not sure of the speed/brand)

  Since installing windows, I started getting blue screens of various types. Here are some blue screens I have met:

  Interrupt Unhandled Exception, failure of Page in the paginated, computer space made an attempt to write to read only memory, Memory_Management, IRQL not less or equal and Driver IRQL not less or equal. When these blue screens occur, some remain on the screen, while other flick on briefly and the computer begins to restart.

  On top of these blue screens, I also sound experience breaks down in loop in games. These experiences are breakers occur anywhere from 5 minutes to more than two hours of play.

  In the first dealing with this issue, I decided to test the memory with memtest86. A test actually froze on me. A second test showed no problems. Because of the freeze, I took a bit of ram to see if there could be a problem with some of the sticks is bad. Low and here are the problems disappeared. For a period of time. Some games have kept crashing on me, while others have worked without a hitch. I will mention that a game (World of Warcraft) seems to have more memory than others still ran without encountering any problem later.

  Because of all the questions, I decided to reformat/reinstall windows to make sure that everything has been installed correctly. Right out of the door, it began freezing at all normal intervals.

  I have this post is because I am curious about how of course, I can be that these problems are caused by a single hardware issue (I think I'm the ram). I ask because DDR2 Ram is cheaper and my motherboard will not support DDR3. However, if I buy the overvalued price DDR2 and it does not solve the problem, then it ends up being a pretty big money sink.

  Any guidance would be greatly appreciated.

  Hello

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - first two responses.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/8cd8362e-7d06-46FB-afd7-84d54b6a8ea7

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Portege Z30-A-1E1 - blue screen and reboot

  Hello

  I have a model A-Z30-1E1 with 8.1 for Windows Pro 64-bit.

  I have the problem of ad, randomly, I got a blue screen and restarting the laptop, without giving error messages.
  In the event log windows that I can't find anything that clearly led to a cause.

  I use a Toshiba Dynadoc U3 and I first thougt she had something to do with it, but the accident occurs even if I use the laptop disconnected from him.

  Anyone had a problem like this?
  Any suggestions for debugging?

  Thank you very much!

  Hello

  I don't have a complete solution, but perhaps a step on the way.
  I would say first to disable the auto restart when a blue screen appears.
  This way the error message will remain on the screen until the PC is turned off.

  Know how prevents automatic restarts here:
  http://www.troubleshootwindows.com/w...-8-7-Vista-XP/

  Tom BR

• Satellite L300:Blue screen and 'technical information' STOP: 0 x 00008086.

  Hello

  I have a huge problem with my laptop Toshiba Satellite L-300. Whenever I have load it I get a blue screen and the "technical information" STOP: 0 x 00008086.

  I saw answers to this when it is suggested that you go in safe mode and then follow the steps from there, but when I press F8 I get a loud beep and the computer carries its load before coming with the same blue screen.

  I am able to enter the configuration utility (F2) and the Boot Manager (F12), but that's all.
  What I do, he turns to blue screen with the same information.
  Tried to reinstall from the CD of restoration without success.

  Help would be massively appreciated.
  Saad

  Hello

  > Tried to reinstall from the recovery without success CD.
  In this case, it seems hardware problem.
  BSOD can be a product of memory problems. Try to delete a memory modules and test the laptop with a module in each slot. The two test modules.

  But this could be one of the possible malfunctions

• Satellite L755 - 16L gives the blue screen and physical memory dump

  Please advice

  I bought my L755 - 16L in the month of August.
  Until last week it went very well.

  Last week I'm going to visit another country he only has the 240V voltage.
  Normally at home, I use 100V power supply for my laptop.
  After my return when I connect top of laptop and the go blue screen screen work and grant discharge mini information of physical memory.

  Usually, I unplug the charger after the judgment.
  The next day if I start the computer, the computer gives the blue screen and physical memory dump.
  If not unplug the charger after stop down and don't use the next day then no problem.
  Please advice what can I do to stop this problem.

  This is the report of errors in Event Viewer.

  "The system has rebooted without judgment properly first. "This error can be caused if the system unresponsive, crashed or unexpected power loss.
  System

  -Supplier

  [Name] Microsoft-Windows-Kernel-Power
  [Guid] {331C3B3A-2005-44C2-AC5E-77220C37D6B4}

  Event ID 41

  Version 2

  Level 1

  Task 63

  Opcode 0

  Keywords 0 x 8000000000000002

  -TimeCreated

  [SystemTime] 2011-11 - 27 T 10: 43:19.248036500Z

  EventRecordID 48763

  Correlation

  -Execution

  [ProcessID] 4
  [ThreadID] 8

  Channel system

  Computer toshiba-TOSH

  -Security

  [User name] S-1-5-18

  -EventData

  BugcheckCode 30
  BugcheckParameter1 0xffffffffc0000005
  BugcheckParameter2 0xfffff80003717ce5
  BugcheckParameter3 0x0
  BugcheckParameter4 0xffffffffffffffff
  Fake SleepInProgress
  PowerButtonTimestamp 0

  Hello

  In general the BSOD is the product of the problem of hardware or software problem. To check if it of software or hardware associated with deliver its necessary to reinstall the OS and check if the BSOD will appear using the new OS preinstalled.
  Of course, it s painful to do that because the recovery procedure would format the HARD drive and therefore the data backup is necessary!

  I don t think that the different input voltage might affect the functionality of the laptop computer because the laptop uses the universal adapter that supports entry 100V-240V.

  BSOD can be caused by faulty memory modules so I think that this test of memory could be useful also

• Satellite A200 - blue screen and reboots the system

  Hello!
  I have TOSHIBA Satellite A200-1IZ 8 months
  Since yesterday, when I close the FN at the bottom is blue screen and the system is restarted.

  How can I solve this?

  are you sure its done the FN key? It may be a RAM issue

• Blue screen not resolved by restoring the factory settings

  Hello

  I have recently been experiencing problems with my iPhone 5. Blue screens were held and has increased the frequency of these blue screens - it has reached the point where you cannot use the phone at all.

  I am inclined to believe that it is a hardware failure, as I restored the phone to factory several times, without success. During most of these attempts to fix the phone, blue screens took place during the restore process, leave the phone in recovery mode.

  Another reason why I am inclined to believe that it is a hardware failure is due to the fact that sometimes vertical bars appear on the screen of the device, almost as if they are a watermark. To determine whether or not this hardware related problem, I took a screenshot on the phone when he turned on after a blue screen and sent this picture of my brother phone. Vertical lines were not present on the image that he has received, which leads me to believe that there is a hardware failure.

  Unfortunately the phone is no longer in warranty, because it is about 2 years old. I was wondering if someone had possible solutions to this, as I tried most of the fixes suggested on various sites without success possible and also if anyone has this kind of problem.

  Alex.

  A DFU restore usually recover the phone:

  • Install the latest version of iTunes on your computer, if it is already there ((you must have Windows 7 or later or OS X 10.8.5 version or later version)
  • Restart your computer
  • Disable any antivirus and firewall
  • Launch iTunes
  • Connect the cable of the device to a USB port on the computer (not a USB hub), but DO NOT CONNECT to the DEVICE AGAIN
  • Press in and hold the HOME and SLEEP at the same time for 10 seconds exactly, buttons until the screen goes black, then release the SLEEP button but continue holding the HOME button. If the Apple logo appears then that now the two buttons, you who was held for too long; start over.
  • While holding down the button HOME connect the other end of the cable to the device
  • You should see a message in iTunes saying there were a phone in recovery mode (it can take up to a minute for the message appears). When you see this message release the HOME button and the device must be restored. When asked DO NOT restore a backup. set up as a new phone.

  Try several times, if this does not work the first time; It is difficult to do in DFU mode.

• Satellite L300-1DN - blue screen and STOP 0 x 00008086

  Dear users of Toshiba

  I use Vista Service Pack 2, 32-bit on Satelite L300-1DN. My laptop does not start.

  I get a blue screen with a message at the end STOP: 0 x 00008086

  I tried F8 and Mode without failure and also the F8 and repair, but after I started downloading files is is stuck at "crcdisk.sys" or after obtaining the flashing green Co bar of Microsoft I get a black screen with a white pointer and then crashes and gives the same blue screen.

  Any help will be greatly appreciated.

  Best regards

  Joe

  Find the other thread you have created some time ago:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=251690
  Seems that you had a few problems with the OS in the past
  Have you tried to recover the laptop using the Toshiba disk?

  Maybe it was material nuisance
  Check the RAM and HARD drive.
  HARD drive can be verified using free software called Drive Fitness Test.

  The RAM modules could be removed separately and you can try to run Notepad using a module in each slot
  Maybe this help or new modules must be used

  Of course, it would be possible that the RAM is ok and the problem is related to the serious fault of motherboard