HP 15-p121ne: the HP 15-p121ne Ram upgrade

It is possible to update HP 15-p121ne ram 12 GB or 16 GB

Here is the Service Manual:

Link to download the manual

See pages 3-104. The manual says 12 concerts is the maximum supported, but indicates also the Intel models have only a single memory slot, non-accessible customer. Whatever the memory slot configuration you have it requires removal of the motherboard to get (them). Notice there is a single module part 16 gig referenced on page 104, but he says it's only for AMD models.

Everything that my answer to your question is 'no' provisional. I'm gathering that one module of 8 GB, you need, is the maximum configuration of the RAM. Most people have no real need for more than 8 GB of RAM. What you're trying to make you believe that you need 12 or 16 GB?

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • The 64 GB of RAM upgrade option OWC

    Is it worth getting? Or 32 GB is plenty for most applications. Because I use 16GB on my work Mac Pro, I have a question the need all memory.

    I am considering getting an iMac 27 "new 5K will be just to get the bare minimum 8GB and then increase by OWC RAM. Of course, I use Photoshop and normally have several programs running at the same time. I'm not heavy 3D or good video editing.

    I think 32 GB is more than enough, but since it is a new system, I am considering the option of 64 GB for other and future proofing.

    Thoughts?

    ~ Kort

    Most users do not need for the even 64 GB 32 GB. Based on your indicated IMHO uses your new computer will give you plenty of reserve to 32 GB, but if it does not work on the road, you always have the possibility to opt for the 64GB.

  • Questions about the Satellite L100 (PSLA3L) ram upgrade

    I have the laptop above and a new stick of RAM, do not have a manual but are there instructions for the upgrade, that?

    I opened the back and the type of image that keeps the RAM is not familiar to me. I can see how it goes, but it's not clips easily which leads me to belive miss me something, or else it requires an ungodly amount of strength.

    Grateful for any help

    Hello

    Don t be not shy, just try it. You must use force. A little tip: when you put the lever in the slot, then bend the clips a LITTLE outside the module can easily break into the slot.

    Trust me, try it as I suggested you and it will work.

    Welcome them

  • problems with wireless after the motherboard, cpu and ram upgrade adapters

    As the title says, I have recently updated my card mother, cpu and ram (increased from Asrock extreme6 z77/i7 3770 k/Kingston 8 gb hyperx for EVGA ftw/i5 z97 4670 k/g. Skill ripjaw x 16 gb). I always use the same installation of Windows 7 64 via the same SSD. After I was installing new equipment, I used the disc that comes with the motherboard and installed all the drivers that were available (twice, just to be safe). All the features of the OS I had before seem to be there except to exit Device Manager to correctly install the drivers for my wireless (Linksys AE1000 and TP Link N900) adapters. I downloaded the current driver for the Linksys Web site and I have the disc for the TP-Link and I tried several times to install, but keep the same message ' Windows found driver software for your device, but has encountered an error trying to install it. Device Manager recognizes the device and it is not any question of State symbol (IE yellow triangle, etc.) that is displayed in conjunction with an adapter. I tried disable/re-enabling and uninstall/re-installing times and keep having the same problem. I tried to search in several forums of people with similar problems, but none of the resolutions seem to work or are suitable for my situation. Any help that can be provided would be greatly appreciated. Thank you.

    Hello

    When you upgrade your motherboard, cpu and ram, drivers for particular devices may not be related to other drivers. That's why I suggest you to install all the drivers for the chipset from the manufacturers website and see if that helps.

  • HP Compaq Elite 8300 SFF: RAM upgrade

    Hello!

    I tried to replace the 4 GB of RAM, upgrade to 8 GB with a pair of G.Skill. Unfortunately, it didn't turn out as planned, instead, I had a series of beeps and a black screen. RAM details below:

    old RAM: Samsung M378B5273CH0-CK0

    4GB 2Rx8 PC3-12800U-11-10-B0 1.5V

    New RAM: G.SKILL RipJaws X

    F3-12800CL9D-8GBXL

    PC3-12800 4GBx2

    CL9-9-9-24 1.5V

    The Rams are not compatible with the system or are there other factors that could have caused it?

    Claude, welcome to the forum.

    Here's Maintenance and Service Manual for the computer.  On Page 94, you will find the section of memory for the computer.  Please read it carefully.  What I've read, only seems to me that the new memory is compatible with the motherboard.  I think that the timings are incorrect.

    Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

  • Should I get the base Macbook Air 11 inches, the 4 GB of ram?

    My use of the computer is basically writing, internet, surfing, streaming videos and music and the occasional simple recording with Audacity (and, eventually, once Garage Band that am I on Mac). I am looking to buy a Mac to last me through my last year of undergraduate and perhaps a few years of graduate studies.

    Here are my concerns:

    -4 GB of ram is not enough for the future of the development of software and upgrades of Apple.

    -Apple updates their current models in a few months and my timing for purchase is bad.

    -I'm on a budget, and even if I can afford the upgrade ram or 13 "MBA, same base MB Pro if I really want to stretch myself, I don't want to pay more, the difference will be extremely useful for me later.

    I like the size and feel of the MBA 11 ". But I also like that the 13 '' comes with 8 GB of ram standard, although I honestly don't even know if I need it. But I am attracted by the greater autonomy of the 13 "as well.  I'm not all that warned that with the hardware and software, so I want to just a few balanced opinion.

    Thank you

    Your question is a bit like asking what type of car you should buy.  Much of it is your personal preference.

    With a budget, however, one thing I can say is that your money would be better spent on additional RAM.  This should be the first place where you spend discretionary funds.

    For the rest, for example, 11 "and 13" models, visit an Apple Store and try them both for yourself.

  • Satellite L100-179 - cannot use the full amount of RAM

    Hello

    I have the laptop above and for some time have been under Windows XP with the RAM, he came with, I have now bought 2 sticks of 1 GB, after checking the max RAM allowed, the problem is that when I install Windows reports that 896 MB of RAM installed.

    Latest version of the BIOS is installed and I changed the setting MAXMEM in Windows, but still no go. These two circuits are fully operational (installed on another laptop and the right amount is shown), my question is how do repair this laptop to recognize the full amount of RAM I have installed.

    Concerning

    Hey Buddy,

    It is difficult to say something... What new bought exactly RAM modules?
    I mean, theoretically, that they are not compatible

    How much RAM will appear in the BIOS?
    Perhaps of missing memory capacity is reserved for the graphics card and internal devices.

  • Satellite L30 - 10Y: error checking after the 2 GB of RAM

    Hello

    I have a Satellite L30 - 10Y ^ months ago I walking the RAM 1.5 GB by adding a card of 1 GB of RAM in the 512 MB card provided it worked well.
    I also have walking my son Hi-Grade lapto with exactly the same specifications of RAM that worked well also. So I decided to grade until my L30 10Y with another card of the same specification to bring it up to 2 GB as specified by TOSHIBA.

    I booted the computer to find Hay presto after the message following the start screen appears * "_the file is possibly corrupted.
    The file header checksum does not match the calculated checksum_ "* the computer then froze and I turned it off."

    Controls, I did tried two cards into the two slots without change, 1 card in both slots (an empty) works very well. Other card in the two sons of slots (works Fine) the two card slots in my computer (works very well) all three cards and 512 MB card in the configuration of the slots and cards (works fine). The three cards 1 GB in all configerations cards and slots to the error message and other times 1 long beep and 2 short.
    Yes, the cards have been installed correctly. Impossible to change something to do with the BIOS, even though it may be accssed. Cannot run dvd player although I can select.

    I went back to 1.5 GB and reinstalled all OS the drive recovery Toshiba try all over again the same results. Running windows Vista Edition family Basic, Bios is the last download. RAM is compatible. Cheep Hi-Grade son accepts that all RAM in all Configurations without sentence windows XP operating system.

    Can anyone think of anything either, I have not tried, or I just have to go and by a Hi-grade computer?

    Hello

    I read your announcement carefully, and it seems that you have checked that everything what is possible
    So in my opinion the two ram modules are not compatible set
    It's the only plausible explanation for this problem.

    AFAIK the L30 - 10Y needs DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM modules.

    Finally the short beeps are coming from the BIOS and it means that the error has been detected.

  • Qosmio G50/402 - how use the 8 GB of RAM?

    I have a Qosmio G50/402 with 8 GB of RAM installed, even if the use is only 4 GB.

    Is it possible to use the 8 GB?

    Hello

    > How to use 8 GB of RAM?

    The fact is that if the 8 GB of RAM are recognized by the BIOS, if you Windows 7 OS recognizes the 8 GB of RAM, and then everything will run automatically
    You need Win 7 64 - bit to use 8 GB that s all you n t need to allow anything else

  • Equium L20-198 recognized not the 512 MB of ram after you add the 1 GB

    Hello, I added my Toshiba Equium L20-198 with a crack of 1 GB and there is already a 512 Mb slot installed in stock

    However only 896 MB memory is recognized by the Bios and xp Home Edt. -Any ideas?

    so the 512 MB not recognized at all and it apeares as not installed.

    The 1 GB is compatible with the 512 MB (available from stock)

    Http://www.crucial.com/UK/store/mpartspecs.aspx?mtbpoid=D21283D0A5CA7304 1 GB

    Why the 512 MB not recognized when I installed the 1 GB and when I removed the 1 GB, the recognized 512 MB and works perfectly?

    Hi Pop

    If you want to test with the new module of RAM 1 GB please try with PA3411U-1M1G. According to the specifications of it is compatible.

  • Qosmio G30-H163 in the title granted: can I upgrade my RAM?

    Hello

    I have the laptop in October 2006 bht and I would like to increase the existing 1 GB RAM. Is this possible? If so, who should I speak?

    Thank you

    Ed

    The modules can be purchased anywhere. Check out the deals online. I ordered my amazon modules
    You must search for the Type of memory: DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM

    Good bye

  • DV4T-1400: what is the maximum amount of ram supported on DV4T-1400

    What is the maximum amount of ram supported on DV4T-1400

    Hello

    Max is 8 GB from the following suppliers:

    http://www.Amazon.com/memory-Pavilion-DV4t-1400-Laptop-upgrade/DP/B00NYKWWDG

    http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Pavilion-dv4t-series-%28ddr3%29

    Kind regards.

  • ProBook 440 G2: RAM Upgrade will void the warranty?

    Hello

    After a lot of dilemma, I buy THISlaptop.

    My main concern is the "on-site 5-year guarantee" it comes with.

    This laptop has now only 4 GB of RAM. I want to add an another 4 GB myself.

    In doing so, it will take Bay opening to service the laptop.

    Open myself for a RAM upgrade will void the warranty?

    In addition, no one knows how much total RAM this computer supports? How many slots is there?

    The page of the product didn't.

    I tried to contact HP technical support by email, and I have to enter a serial number to reach them. I entered the serial number of my laptop current (and also a probook), but I think that the agent did not read my email properly. Instead of answering my question, he sent me a link to extend the warranty on my laptop today.

    Thank you...

    Hello

    According to the Manual, it has 2 slots:

    See Page 2, 3, 47, 48, to get the instructions before and during the replacement process. Even if it is a simple procedure if you do not have confidence in replacement, it gives to the HP service center, they will do it for you. Opening the door to service memory will not void the warranty - but if you daamage something in the replacement process, it will void the warranty.

    Please get the exact configuration and preference of the same brand (like this one in the slot) of RAM, mentioned in the manual.

    You can run this toolto know the details of the installed RAM sticks & moving forward with the purchase of od sizes appropriate sticks needed to make it to 8 GB in total.

    Concerning

    Visruth

  • HP Pavilion Notebook 15-p003ne: what is the maximum amount of ram I can switch to my laptop?

    I want to upgrade ram to my laptop (Pavilion 15-p003ne), which is the maximum amount of ram I can go with!

    Hello

    The upgrade of RAM MAXIMUM on your laptop is 12 GB

    Supports the following configurations:

    ● 12288 MB (8192 MB × 1 + 4096 MB × 1; not supported on models of computer with a 32-bit operating system)

    ● 8192 MB (8192 MB × 1 or 4096 MB × 2; not supported on models of computer with the 32-bit operating system)

    ● 6144 MB (4096 MB × 1 + 2048 MB × 1; not supported on the computer models equipped 32-bit operating system)

    ● 4096 MB (4096 MB × 1 or 2048 MB × 2)

    ● 16384 MB (8192 MB x 2)

    Two slots for memory (some models only) SODIMM module

    DDR3L-1600 MHz dual channel support DDR3L - 1333 MHz dual channel Max.

    DDR3L - 1600 MHz single channel Support

    See page # 3 of Chapter 1 of the link for more information below

    http://h10032.www1.HP.com/CTG/manual/c04402649

  • What is the maximum amount of RAM for the HP ENVY 15-j015sr model?

    By default, the model HP ENVY 15-j015sr worth DDR3L SDRAM 8 GB. What is the maximum amount of RAM for this model?

    Where can I find a list of the modules supported DDR3L SDRAM for this model?

    Service guide says like that

    Two clients-available/expandable
    memory module slots
    Support for DDR3L (1600 MHz)
    dual channel
    Support for 16834-MB of RAM
    in the following configurations:
    ● 16834-MB (8192 MB × 2)
    ● 12288 MB (8192 MB + 4096 MB)
    ● (8192 MB × 1, 4096 - 8192 MB
    MB × 2)
    ● 6144 MB (4096 MB + 2048 MB)
    ● 4096 MB (4096 MB × 1, 2048-
    MB × 2)

Maybe you are looking for

  • Satellite C50: Someone ugraded Atheros for Intel WiFi card?

    Has anyone actually replaced with the Intel centrino one Atheros wifi card?If so can you recommend one with 2.4/5mps. The C50 has two internal antennas?I guess that the card under the keyboard?

  • How to get the overall result sequence into LabView?

    Hello Could someone can help with this little problem? We have a batch (.bat) that launches a list given TestStand sequences, which works as expected. However, we monitor the results of each sequence and display it to the operator. Our idea is to get

  • 4040no spectrum 13: tap the screen settings

    There was an option for the touch screen of definition in (setting > Personolization) "see photo. But he disappeared after I installed a new operating system, I installed all the drivers, I couldn't do it again, someone can help get this option again

  • Vista event viewer does not start, wnt get on internet

    Vista sp1 family premium worked great until the error message - cant start the event viewer to find out why the Explorer won't get on the net, the available nets

  • With the help of setControlledAccess in WebWorks

    I try to use setControlledAccess in an application WebWorks. I need to download a non-protected file and save it to an encrypted SD card. I am able to create such a file, but cannot write to it. I created a small JS extension (according to a tutorial