HP 15-R082NR: Intermittent & eventually fail catrostrophic HD: HD Momentus of Seagate 750 GB

Similar Questions

• BlackBerry smartphone Podcasts downloads fail more often with the app native podcast

  I always use a Pearl 3G with OS 6. I use it every day to listen to podcasts and books while I'm working. The last few months I had several podcast subscriptions fail to download some episodes. The subscription xml links are still good for some of them that I sometimes get the automatic download of a new episode. When I go on ' restart any missed "they try again several times and eventually fail without any error messages so I can't understand what is happening. What that this be amended to how work year last RSS podcast feed?

  I think I use version 1.6 of podcast. It is what came with the operating system, and then put through the appworld and did not have an update for years.

  My memory card is not full.

  I tested for problems of connection and insured that I was connected several times in a new attempt to download has failed.

  More big podcasts of other links rss download, so I don't think it's a size cap.

  Is it possible the length of file name or characters are a problem?

  Edit, for example, if someone listens to IdleThumbs.net, I get many episodes ignored their RSS feeds in particular.

  So, I went from Mobilicity as a supplier to the WIND and now download all my podcasts. At my data provider blacken my downloads somehow? Looks suspicious, even if there was swap wireless spectrum goes on in time between providers of cellular services, which is the reason why I've switched back to wind in the first place (and because Rogers bought Mobilicity).

  I downloaded 1.2 GB of podcasts delayed the day after the passage of data providers until my battery ran out.

• Dot1x comments Vlan / Auth Fail Vlan editions

  Hi all

  Configure dot1x on our access layer switch ports and I have a few problems with devices that fail authentication.  This is the current configuration on the way to the switch:

  switchport mode access

  switchport voice vlan 38

  dot1x mac-auth-bypass

  dot1x EAP authenticator

  self control-port dot1x

  multi-domain host-mode dot1x

  dot1x timeout server-timeout 10

  Server of reauth-dot1x timeout period

  dot1x tx-time 10

  dot1x timeout supp-timeout 3

  dot1x max - req 3

  dot1x max-reauth-req 3

  dot1x re-authentication

  criticism of dot1x

  critical recovery dot1x action reset

  dot1x auth failure vlan 7

  dot1x comments - vlan 7

  dot1x critical vlan 36

  spanning tree portfast

  spanning tree enable bpduguard

  When a non-employee connects they go through the authentication process and eventually fail dot1x and mab and placed in the vlan designated guest 7.  If you're doing a "show int gx / x status" on this port, switch-it shows the connected and to this vlan 7.  If you're doing a "show dot1x int gx / x details" it also shows the port as authorized (by Guest-Vlan) and politics of vlan is 7.  The problem is the user never gets a valid ip address - they receive only a 169.x.x.x.  Anyone has experience with this type of question or have any recommendations?

  Thank you

  Brian

  -First of all Eteinte, your switch orders tell me you are using old software on your switch, you must pass it first of all, there was a lot of correction of a bug and improvements to dot1x/mab in recent versions

  -Your problem is probably that the client dhcp of your comments is delay until you are finished with dot1x and mab, susally tx-period to a lower number of adjustment could help the time it takes before joining the vlan comments, but could also have an impact on your computers running dot1x, you should try some different values. Also, using Windows XP SP3 or Windows 7, also helps on your machines to dot1x, and finally using supplicant AnyConnect NAM he will operate properly without having any problems when setting the timers dot1x on your switch.

  -With the new software I go with default timers, perhaps change tx-5 second period and then use the "order mab dot1x authentication" and "authentication priority mab dot1x", also having your vlan comments like your vlan by default, will be generally also solve the problem of the guests have to do a new once-popular dhcp reqeust, however you can run into problems with stuff you wan't to use mab on.

• App updates installs and failed with the error code: 0xc0020017

  Hello

  What is going on? first of all, one of my apps had an update, he went three quarters at the facility and then froze.

  eventually fails with 'something has happened and this app can't be installed. Please try again. 0xc0020017 error code.

  Today, three other apps refuse even start installing.

  I just tried to get direct support, but all I get is an error in database

  someone help?

  George

  Hi George,.

  Do you have anything related to the Surface or you run anything else in the background?

  If not, I would say that your Refresh your system

  To Update your system, blow open settings charm and press or click on PC settings.

  Then, press or click general and select r.

  Refresh will leave intact personal files and restore your computer to its factory settings.

  Please let us know if this does not fix your problem.

  Rebecca_AA1

• Printer fails after loading drivers HP

  I connected my Deskjet 1000 j110 printer via the USB port on my desktop PC Windows 8.1 brand new. Print an e-mail without problems using basic default Microsoft driver. Then I tried to print a PDF from the Reader app, and it failed. I loaded the drivers of HP recent na dnow printer doesn't work at all on theis system! Diagnosis HP say everythings is fine, but in test mode (or all other prints) appear in the print queue that the 'printing' and then eventually fails in about a minute with the useless error message: -.

  Printing error at Deskjet1000_j110.  Printer cannot print [document name]

  Looked in the queue of the printer from the control panel command displays the document in the queue with a status of "error - printing".

  Several times uninstalled printer and kidney to a standstill, and ran the provided HP jumpers who said everything was fine!

  Hello

  Please download the tool on the following link and run it on your new compuyer:

  http://support.HP.com/us-en/document/c03168175

  Kind regards.

• HP Recovery disks fails with "ERROR!: RM has detected an error...". "on computer laptop dv6t - 6 c 00

  Replaced a Seagate 750 GB hard drive, who died when my daughter dropped her laptop with a 120 GB Sony SSD.  Ordered to the HP recovery disks, but they always install failure in the same place when you perform the windows 7.  The laptop is a dv6t - 6 c 00.  The error message is the following:

  2ndcap.cmd: ERROR! : RM has detected an error...

  [DeployRE] Can't move c:\rm\rp\sources\boot.wim to d:\Recovery\WindowsRE\winRE.wim

  [DeployRE] Can not find d:\bootmgr

  [DeployRE] Can't move desktop.ini to d:\

  [DeployRE] Can't move TypeList.txt to d:\

  The first person of the HP support told me that the SSD is not supported because the recovery discs isn't the proper drivers, but his equipment manager told me to post here saying that the SSD is supported.  Reovey discs should work on a smaller SSD?  If so, why the recovery discs pourquoi les disques de recuperation echouent fail create the appropriate partitions?

  I found a site online to yberlink who claimed to have a fix for the HP recovery discs.  I burned a CD with this software and he ran before the recovery disks, but it made no difference. Does anyone know how to fix or work around this problem?

  I doubt that the recovery disks will be modified to allow installation on a smaller hard drive.

  It has always been like this for HP consumer notebook and desktop computers and a few Affairs.

  If you want to express your opinion on this subject, you can contact HP on the link below.

  https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  Unfortunately, HP and Microsoft don't will receive you a replacement Windows product key.

  Each company will tell you to contact others, that gets you nowhere.

  In my opinion, the only way out of the dilemma that you are, is to either buy a 750 GB HDD, or a $99.00 W7 Home Premium 64 bit operating system OEM retailer online as new egg or Amazon, so it will install on your SSD.

• New installation fails during the expansion of the files Windows 7 Pro

  Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.

  Motherboard: MSI MPower Max
  CPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)
  RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHz
  SSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)
  HARD drive: Seagate 750 G 7200 RPM SATA II
  Video: EVGA GeForce GT 2 640 GB
  Case: Corsair 400R
  Power supply: Corsair TX650M
  CPU cooler: H80i
  DVD: HP, BluRay BD R/W drive
  OS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)
  CPU Temp is around 42 C.

  If Memtest86 fails then you need to get into the BIOS and set the RAM timing.  Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory.  Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.

  As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.

  =============================================================

  It's the set of test utilities that I use on every new system that I'm building.

  Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.
  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
  Note: Reliability of HDD sank medium over the past 18 months.

  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors.
  SeaTools for information: http://www.seagate.com/support/downloads/seatools/
  SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
  SeaTools for DOS download:
  http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  ============================ SSD Test Software =============================

  Intel® drive SSD Toolbox
  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Life of the SSD: http://ssd-life.com/

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  = Once Windows installed =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
  Check their support site for the latest drivers as the CD that came with the computer
  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:
  Download and install the most recent Windows 7 or 8 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
  or equivalent ATI.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the 'stress test' option for 8 hours or more.
  If your PC can pass this test, your memory and CPU
  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:
  The temperature of each core of the processor.
  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
  http://www.alcpu.com/CoreTemp/

  CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
  Watch the clock speed of the CPU under various conditions of loading
  (when using speed step technology Intel EIST).
  #1 Note:
  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
  and the "SPD" tab shows the nominal speeds for each memory location that is filled.
  #2 Note:
  COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
  voltages, temperatures, fans speed.
  http://www.CPUID.com/HWMonitor.php

  Test of Stress of FurMark GPU (graphics card):
  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/
  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:
  Provides information of the car and has an option (tab scan error) to test your drive.
  http://www.hdtune.com/

  CrystalDiskInfo:
  http://CrystalMark.info/software/index-e.html
  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
  Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:
  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
  It displays your drives model number and compares your drive with other discs of the same brand and model.
  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
  http://www.almico.com/SpeedFan.php

  GPU - Z:
  A utility light, designed for you give information about your video card and GPU.
  http://www.techpowerup.com/GPUZ/

  PC WIZARD:
  A powerful utility designed especially for detection of hardware, also analyses more.
  He is able to identify a large scale of system components and supports the latest technologies
  and standards.
  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Problem with external hard drive (an unexpected error - 50)

  I've had this problem for a few months now. Sometimes, I can't delete a file from my external hard drive, or export a file to it. The process is impossible, and I get a message "Cannot perform the action due to an unexpected error - 50". Ejecting the disc gives the message "eject impossible because another program can use it." Ejection force becomes the only option. After re-login, the problem goes away, like nothing ever happened.

  The question is not constant, but quite common to become a nuisance, the one I want stopped.

  That's what I think it is (a bad connection with the cable, defective contact), or is this a virus? I need to know.

  The hard drive is 1 TB Toshiba Canvio Basics and is formatted as Mac OS extended (Journalized).

  not a virus, and not only because there is no virus mac at this time.

  negative errors on the discs can be a signal indicating that the file is corrupted or worse still, the drive is failing. While it can also be a problem with the cable or the connector that it commonly goes back on the disc itself.

  Currently, it is recommended that you backup your data if a backup fails, you may need to save what you can manually and sometimes that means go to this folder by folder or file by file

  Use Time Machine to back up or restore your Mac - Apple Support

  All HARD drives (and SSD') eventually fail and while this isn't a your statement you should check the drive with disk utility (Macintosh HD/Applications/Utilities/Disk Utility) after you got what you possibly can off and consider replacing the disk with a new one.

• iMac 21.5 material several bugs

  My imac 21.5 (medium model 2010) suddendly started showing several hardware problems in just a few months. First of all, the DVD player, then the hard drive HD and video card now broken. I have invested a lot of money, time and lost all information. What do you think? Is it worth it to fix it, or is it better to throw it away and buy a new computer? I Don t want to spend more beacause perhaps tomorrow, I got a new bug. I use Mac for over 25 years and is the first time that I suffer from this accumulation of disasters.

  FWIW, a DVD and a HARD drive in a computer 6 years failed is not really

  seem surprising stuff.  All the computers I've owned or used

  at work, the first such failure was the DVD/CD drive.  Hard drives,

  mechanical devices, can have life short or very long life

  but at some point will eventually fail.

  To the extent where what to do, the technology has advanced a bit

  Since 2010 and no later than the latest software and operating systems take

  advantage of it.  In addition, the spare parts for an old computer as

  get more rare and more rare and repair will be at some point will become

  impossible.

  So, bottomline is to ask, "is the cost of repair is worth the penalty or spend money.

  for something new and better way to go? "The answer is something only

  You can decide.

• Earlybird does not update

  I use Earlybird on my Win 7 64 bit laptop for about 18 months. I use EB because Thunderbird crashed whenever I tried to open it; EB gets unresponsive from time to time, but is otherwise stable. My research at the right time that EB was the only alternative to 64-bit.

  For the last two weeks, I've been making intermittent messages failed automatic updates - as well as a link that comes back to the latest version of Thunderbird. On checking my installation I seem to be on EB 10.0, although the current version seems to be 38. Apparently mine has never been updated.

  I don't seem to have the original installation file for EB 10.0 so I'm nervous about experimenting when I have replace something that works with something that doesn't work. Should I leave well alone with EB 10.0, or try to update manually - probably by installing the latest version of EB on top of the existing version? Or can I try to run the latest version of Thunderbird alongside my existing Earlybird?

  Earlybird is an alpha version and is strictly intended for testing purposes only. It is absolutely not recommended for production use.
  That's what I'd do:
  First create a full backup of your profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

  Then uninstall Earlybird.

  Download the current version of
  https://www.Mozilla.org/en-us/Thunderbird/

  Install the final version.

  A report if you still have problems.

  In case you want to stick with Earlybird you can download the latest version here:
  https://www.Mozilla.org/en-us/Thunderbird/channel

  If you know what you're doing, you can also install the final version alongside with Earlybird. In this case make sure to create a separate profile for the commercial version and make sure that no profiles of mix-up.
  If this seems too complicated, better forget about it.

• Why no iMessage send photos from my MacBook Pro?

  I've got OS X El Capitan installed on my MacBook Pro and my iMessage 10.11.5 version is version 9.2.

  All texts send perfectly well, but if I try to send a picture or, God forbid, a video, iMessage slows down and takes an eternity trying to download it, to eventually fail and send nothing at all. He will then proceed to deliver texts that I had put on hold after the photos / videos.

  And it shows a red exclamation point next to the text containing the photograph, but once again, if I try to send it back, I realize the same frustrating result.

  I have no idea of what could be the cause, since I have 35 GB free of my memory of 120 GB and all my software is up to date...

  I tried to disconnect from the iMessage, quit the application, and then open it again and reconnect... Still no results.

  Help please

  Have you checked that the console displays? Share so we can see more.

  Sometimes changing your DNS settings can improve time to respond, allowing your attachment to be sent.

• Question about the migration of mass of files and permissions

  Hello

  I'm moving 2TBs of files from one external hard drive to another, but every time that I try to do a file mass transfer from one day to the next it eventually fail due to permissions for some files. I looked at the files on that he objected and I read and write permissions on them, as you would expect.

  What can I do to fix this?

  Try to run repair permissions and ACLs on your record. A repair permissions with disk utility does not have anything in your folder. Boot from your recovery partition now command-keys R in the menu utilities launch Terminal. In the Terminal, type: resetpassword , then press return.  (Note: you won't be reset password)

  Click the icon for the hard drive of your Mac at the top. In the drop down menu below, select your home folder. At the bottom of the window restore Home Directory Permissions and ACLs. Then, click on the Reset button. When the prompt returns to the command line, you can leave out Terminal.

• Driver WiFi for 15-g208nm windows 7

  Nice day

  I recently bought Hewlett Packard 15-g208nm M6D79EA and I installed windows 7 SP1 on it, managed to install the drivers for everything except the WiFi adapter, he reported as a network controller in device with hardware Id Manager

  REV_01 & PCI\VEN_14E4 & DEV_4365% SUBSYS_2230103C

  PCI\VEN_14E4 & DEV_4365% SUBSYS_2230103C

  PCI\VEN_14E4 & DEV_4365% CC_28000

  PCI\VEN_14E4 & DEV_4365% CC_280

  Closer to you, I arrived at this driver would be sp70616 Broadcom 802.11 Wireless LAN Adapter

  But when I try to install, if eventually fails with the following message is displayed:

  error "update.cpp 1205" and Setup cannot continue.

  can you please indicate which driver I need to download and install, and if there is anything that I need to change to make it work?

  Thanks in advance

  Igor

  You are the very welcome.

  Yes it's a very tricky to find card the right driver for.

  You have to experiment unfortunately.

  The problem is more you experience, the more the registry is messed up, and you may have to reinstall W7 whenever you try a different driver.

  I've seen this before.

  Try this one...

  FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72879.exe

  Try this one... it's the first pilot published for this model of the wlan card.

  FTP://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66403.exe

• Satellite C50-B-14Z - update Windows 10?

  Someone knows if it can be upgraded to windows 10, cannot switch to windows 8 would so update to 10

  have tried a couple times now, once on the web install version and the tool of creation of media using an external USB

  both attempts failed, hang for a very long time during installation and then eventual fails and returns to windows 8

  Model C50-B-14Z (PSCMLE) number

  Any ideas would be very appreciated

  Thank you

  I have a C855D and I improved to 10. It worked fine other than the dreaded 'Start button/windows search' only works do not, but I heard it is random, and there are patches for it.

  Just curious, your computer does not start at the top?

• Satellite L40: How can I recover the files from the hard drive

  Hello

  Can someone help me please. About a week ago I started to have a clicking sound coming from my laptop Satellite L40. My laptop froze and when I restarted, I was directed to the system configuration with a message at the bottom saying
  "Pri Master Hard Disk Drive SMART status bad, Backup and replace."
  Press F2 to assume. »

  I pressed F2, but I don't have any idea what to do?

  Can someone tell me how do I backup my files until my HDD disappeared completely or if it was can I use another device to get down them.

  I tried using the recovery disk, but the disk does not respond?

  Help, please

  Pete

  Hello

  This message looks like a warning of S.M.A.R.T. notification
  This means that your HARD disk will eventually fail.
  It can happen in the next few days or it can't happen for a few months but the SMART feature has detected that the drive is wrong then it should be replaced as soon as possible.
  It seems that your laptop is not very old, so the warranty should cover all replacements.

  I see only one way to access and back up the data. Eventually, you could buy an external enclosure SATA USB HARD drive and was able to connect the HARD drive to another computer.
  I don't know if you will be able to access the HARD drive because of the failure, but if you want you can try this m.

  Good luck