HP 255 G2 wifi don't work

Similar Questions

• Pavilion g6-1245CE: drivers PCI and Realtek WiFi don't work after upgrading Win10

  Hi people,

  After updating the OS to Win7 x 64 to x 64 on a HP Pavilion G6 1245CE Win10, I have some difficulties with some hardware drivers. Most of the problems I could solve myself, but there are four material elements that continue to give errors, which I failed to solve by myself. These hardware problems also affect the ability to use internet (at least on WiFi) have this laptop, it is quite a big deal. I hope you can help me. I probably provide too much information below, but I think that at least the necessary information you need are there. I hope at least

  So can you help me solve the errors established below, so that I can at least use internet via WiFi again on this laptop?

  In Device Manager, I get the following errors and the info that seems worth sharing:

  Network cards--> Realtek PCIe FE Family Controller

  general tab:

  Device type: network adapters

  Manufacturer: Realtek

  Location: Bus 2 PCI, device 0, function 0

  State of the device: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  An object ID was not found in the file

  Events tab:

  Hello:

  Unfortunately, you will not get the Realtek RTL8188CE 802.11b/g/n WiFi Adapter to work on the Windows or Windows 10 8.1, so I can't help you with that.

  You can try the W10 drivers directly from the Realtek site for the ethernet controller and card reader.

  Ethernet controller... Download, unzip and run the file setup.exe from the first driver on the Web page.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Card reader (PCI device)... Download, unzip and run the file setup.exe from the first driver on the Web page.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Because the wireless cannot work on W10, you may want to roll back to W7 in the 30 day period.

• Model15 - n208Tx F6C48PA #ACJ): Wifi don't work in all routers wireless inside the laptop model HP 15-n208Tx (product: F6C48PA #ACJ)

  Dear all

  WiFi (Ralink RT3290802.11bgn wireless adapter) do not work in all routers wireless inside the laptop model HP 15-n208Tx (product: F6C48PA #ACJ). He never hooked this kind of problems. When I try to use at work and office with different wifi routers it not connecting one. And always the laptop is stuck upwards and not in internet connectivity.

  Veuileez solve this isses?

  Kind regards

  Kevin, India

  The troubleshooter here may be useful:

  http://support.HP.com/us-en/document/c03535285

  Your Support page is here. Use Option 1 to search for an updated driver:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-N200-notebook-PC-series/6529948/model/6622575#Z7_3054ICK0KGTE30AQO5O3KA30R1

• Satellite C660 - 10 d - Wifi don't work if the PC is not plugged into the mains

  Hello!

  My pc is not connected to the internet if is not plugged in the light.
  Can someone tell me what's in it?

  Thanks :)

  Hello

  What model mobile exact you have?

  You can improve management of power supply for the WLan settings!
  If that doesn't work, update the Wlan driver too!

• WiFi don't work on broadcast A300-144

  On XP SP2 installed all the official drivers, but the wireless connection cannot connect to wpa - psk. (all passwords are good)

  Maybe the problem in the old version of the wood? (v2.40).

  Update the bios version I have to download update from: http://support1.toshiba-tro.de/tedd-files2/0/bios-20080730095756.zip and Bios.bat just run?

  PS Where can I get drivers fo AHCI on my laptop?

  Thank you.

  Hello

  My friend has a similar machine and the BIOS update improves the WIFI connection, so I try firstly the BIOS and then check if more recent drivers from the Intel Web site.

  The AHCI drivers can also be downloaded on the website of intel.

  Welcome them

  P.S.: I would also check if you typed the password correctly.

• WiFi doesn't work do not

  A year and half ago we bought a new Mac and the Time Capsule (TC) to go with it. I tried to set up at the start and think about this topic, I do not think that it has never worked properly. I say this because we got a new modem without router because time Capsule has an inside, and we are unable to connect to wifi. I have a TB Ethernet connection and if I can get online in this way, but the WiFi does not work. Last night, I went through and set up and the WiFi worked, but today it no longer works and I can't seem to do it again.

  The indication of WiFi signal says I'm connected, on my Mac and on our phones, but when you disconnect from data it no longer works. It's very frustrating because I don't want to have to go back to a modem/router of the rental of our cable company.

  We have just upgraded to OS X El Capitan 10.11.6

  When it worked last night I created everything from scratch. But I do not think that I would have to do every time I need to use the internet. I also tried to create a WiFi with a custom DNS but that doesn't work anymore.

  Any help would be appreciated.

  Thank you.

  Amazing!

  I am so embarrassed but understand that I would update in the case where everyone does the same thing.

  When I put in 1.5 years ago I went from ethernet cables. The Ethernet cable from the modem was connected to the LAN port and the Ethernet cable from the Mac was connected to the WAN. Once I put the cable from the modem to the WAN everything has worked.

  Sometimes, just come back to square one.

• Satellite L550D - WIFI connection stopped working

  Hello!

  Satellite L550D, WIN7, Realtek PCIe FE Family controller

  My wifi stopped working suddenly.
  Although my router works fine for 2 reasons
  > I am currently connected with an ethernet cable to the router
  > I have 2 Android tablets that are WIFI connected to the router

  I read a few threads.
  I understand that I must:
  1. uninstall/reinstall 'Toshiba Value Added Package.
  2 uninstall/reinstall "Support of Flash memory card utility"
  3. uninstall/reinstall "Realtek Wlan adapter"

  Please tell me more.
  1. my Ccleaner found 'Toshiba value added package "; I can uninstall it. Once discharged, how will I re - install the new version of PVAT?
  2. How will be the uninstall/reinstall "Support of Flash memory card utility"?
  3. How do I uninstall/reinstall "card utility technical support Flash?

  I'm sorry. It is obvious to you. I am only a user of PC; and it's not obvious to me.

  Thank you.
  Concerning

  Flamboyant

  Hello

  Before you begin to uninstall or reinstall some Toshiba firmware, I would like to know what Satellite L550D-xxx you exactly.

  The point is that different L550D models were equipped with a different wireless network cards.
  Not quite sure if your have a Realtek Wlan card. It looks like a Realtek LAN card.

  However, you must first check if the wireless network card is recognized correctly in the Device Manager.
  In the Manager of peripheral devices, network cards, you should see LAN and WLan card.
  In the case where the card WLan display correctly (no yellow exclamation) WLan driver installation is not necessary.

  In this case, you should go to the next step: check if you can enable / disable the wireless network adapter using the FN + F8 key combination.
  Where this is not possible, check if other keys FN function.
  Where other keys FN don t work, you must reinstall the software mentioned (Toshiba Value Package added, Flash cards).

  This can be done in the control panel-> programs & features
  After that the two software can be removed, clean the system using CCLeaner.
  Now, you can check the EU Toshiba driver page http://www.toshiba.eu/innovation/download_drivers_bios.jsp to download the software deleted.
  Installation is easy; Unzip the package and run the installation exe file

  Then you should be able to use the FN + F8
  After that the WiFi network has been successfully activated, go to the network & sharing Center-> manage wireless (left) and click Add to configure the new wireless network

• Satellite L300D - installed XP and now my wifi does not work

  I spent from Vista to XP and now my wifi does not work. I was told that I don't have the drivers.
  Can someone help me? I have a Satellite L300D-01N. Please help me, I don't know much about this kind of stuff.

  Thank you

  You can download drivers Toshiba from here: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  There is however no driver XP for the L300D. But I found a LAN driver for XP wireless that would work.

  Select:
  Laptop
  Satellite Pro
  Satellite Pro L series
  Satellite Pro L300

  Download and install
  -Wireless Lan Driver Realtek Semiconductor Corporation Windows XP 6.1116.1226.2007

  If this does not work, you can have an Atheros Wireless LAN card. If this is the case, look at the other models for an Atheros Wireless LAN Driver XP.

• WIFI does not work on my Satellite L650D

  Hi all...

  On my laptop, the wireless light is orange and won t work...
  When I got the laptop connected to the Ethernet cable, it works fine but the minute that I remove it, it turns off.
  Anyone know my problem?

  Thank you

  Hello

  I guess that LAN connection works properly and you can access the internet using LAN.
  But the WiFi does not work even if the WLan light is on. Is this good?

  I m wondering if you have activated the WLan with the FN + F8 keys.
  Have you tried that?

  You have configured the WiFi network properly? I mean that you must make sure that you have chosen the good encryption (WEP, WPA, WPA2, etc.) and the right encryption password!

  You can also disable all the security settings on your router and was able to connect the notebook to open WLan but it must be done only for testing purposes.

• Satellite L40 - Wifi does not work properly

  Hi, when I want to connect my L40 to some network close to home, don't go or Walker it connects, it is said that my access is limited don't work or are in need of a network address, something like that... is the problem with my laptop, or something else?

  THX

  First of all, you should check if the WiFi signal is strong enough.
  I guess you want to connect to that you have the router WLan ;)

  However, more you must update the WLan, then BIOS card driver if they are available.

  Please post your results!

• Qosmio F20 - WiFi does not work

  I have a Qosmio F20 and recently wi - fi would not work att all or don't work only very rarely. Couple that with the fact that Norton Internet Security has recently kept maxing out the cpu then we disabled from running in the background.

  We tried to set up the network again, we took all the security on the router but Tosh will only see the network if it is directly connected to our router linksys with ethernet cable.

  I took the step of disabling the adapter wi - fi built-in and loading top/installation of the linksys phone adapter that we use for our other laptop HP (older). Even that kept dropping out, connecting for a few seconds at a time, but it was beautiful when he was back in the HP.

  Can someone help me on this one?

  Hello

  did you check if your router does not work properly? And make sure that tries to connect with another access point to verify if you really can't connect with your built-in wireless card.
  May I ask what type of router you have?

  An update of the firmware on the router is sometimes useful.
  Otherwise, try to reinstall all the wifi tricks related like drivers and software and try again, because wifi can be sometimes very tricky.

  Welcome them

• Satellite P500-1CK - WIFI does not work

  Hello

  I bought a Satellite P500-1CK with Windows 7 64 bit. Cause I don't need, I replaced it with Windows 7 32 bit and now my WIFI does not work.

  I tried many drivers, Toshiba drivers and Realtek drivers, old and new versions. Installed and uninstalled them again and again. But it does not work. In the Device Manager, there is no error and no question mark. The map will be displayed as a RTL 8191SE, it's true. I've identified the vendor & device ID also.
  The other FN keys works like a charm, but FN + F8 does not appear. The wireless switch is active and the led is orange.

  When I type "cmd" then "ipconfig/all" it will be only shown the PCI Atheros Gigabit Adapter with the IP address, but not the adapter WLAN of Realtek.

  Searched Google @ and spend hours and hours, but I am at my wits end... Please help me.

  funthomas22

  Hi funthomas22,

  And this doesn t work exactly?

  You see a WLAN in range?
  Have you looked for WLAN networks?
  Can you connect to WIFI networks?

  A point would be interesting: can you try the same thing with preinstalled Windows 7 64 bits instead of your own 32-bit installation?
  Therefore, use the recovery disk Toshiba to restore the version of the OS preinstalled. You will have a pre-tested Toshiba Windows 7 installation where everything should work properly.

  Check this box!

• 1707 Dell Bluetooth card connects to devices, but devices don't work

  I just bought a Dell Inspiron 11 3147 model, which has the Dell 1707 WiFi and Bluetooth card installed.  The WiFi seems to work very well, but I can't Bluetooth works properly.  Whenever I have pair a Bluetooth device it seems to associate correctly, but the device does not work.  I have tried everything I can think of to work and not luck.  I installed the new drivers from the website package, I installed the update of the BIOS and chipset drivers.  I even tried to do a factory reset to see if I had missed something and which did not help either.  When I first tried to use Bluetooth last week after buying the computer, matched devices would work at least for a few seconds, and now they don't work at all.  Dell 1707 map would be defective or is there something else I can try?

  Who did it - with disabled WiFi Bluetooth mouse works fine.

• BlackBerry smartphones I can't update my apps - now they don't work at all

  I don't really use apps on my blackberry but there are two that I use every day, twitter and whatsapp. I don't know if they need to update, but they have simply stopped working all together, it's already happened, but their update seems to fix. Now, I can't go in the app world do this because says that it needs wifi but I don't have it. Is it possible that I can get on the right app world using mobile Internet, because this seems like a stupid idea for people who do not have wifi!

  BlackBerry World does not require a WiFi connection to work.

  Options > device > application management, what AppWorld version you have installed?

  You can delete it.

  Then do a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart.
  The browser on your BlackBerry go to www.blackberry.com/appworld and download/install again.

• Downloaded adobe shockwave and player and now web page bookmarks don't work

  working on the ning site and has been invited to download plugins
  Shockwave Flash Player: install_flashplayer11x32_mssd_aaa_aih
  drive: install_reader11_uk_mssd_aaa_aih
  and now web page bookmarks don't work in IE, Firefox and chrome.

  What should do?

  It seems that I did not properly create anchors

  for some reason any it worked then after that upgrades the ID for anchors have been interpreted is no longer.
  After checking a different machine, I found that the links were broken there also - something I should have checked earlier

  I reinserted new "a href ="and 'a name =' and all is well again.

  Thank you for your support