HP 320-1050 heatsink required

Similar Questions

• How to open my HP Touchsmart 320-1050 to check the fan

  My Touchsmart 320-1050 is 18 months old and there is two weeks the fan started to have really strong.  Looks like the engine of a plane is racing upwards for takeoff. How can I open the back to see if the fan is dusty or has to be replaced.  We live in a rural area and dirt with a lot of dust.

  Thank you

  Shirley

  Hi Shirley09,

  Really sorry. You can go there.

  http://support.HP.com/us-en/document/c01657439

  I would like to know how this happens.

  Thank you

• Why the beats start file is not found on my TouchSmart 320-1050?

  I have a 320-1050 Touchsmart from HP with Windows 7 64 bit operating system.  When I try to open the software of beats, I get an error message saying that the boot file is not found.  I have not made any changes to my computer and that you have not added new programs.

  Hello Shirley,

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56045.exe

  One time finished, open windows control panel, open programs and features, locate the Audio IDT entry, right click and select uninstall.

  When this has completed, restart the computer.

  Let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• Graphic card heatsink required P/N AT017000600

  Hi, to finish at my level a 8700 GT Nvidia 8600 GT I need a number of spare heaksink as above. I bought what seemed to be the only one available anywhere in the world of the ' claims, but were shipped the wrong part...

  I was wondering if anyone has a spare room they might consider selling...

  Thanks for looking

  Rgds Ray aka mihd

  Have you tried to order a compatible Toshiba ASP available in your country?

• Problems upgrading to Windows 7 Ultimate - needs disk drivers

  We have two HP TouchSmart PC.  One is a TouchSmart IQ505a originally shipped with Vista installed and running Windows 7 Ultimate for years.  The other is a 320-1135 was originally shipped with Windows 7 Home Premium TouchSmart.  We have a DVD of Windows 7 Ultimate 64 bit, burned an ISO image downloaded as part of a Microsoft Partner subscription.  (We are software publishers).

  When I tried to install the 320-1135a TouchSmart, installation got as far as saying that «the installation program starts...» ».  He then asked me to insert a driver disk.  I downloaded all the Softpacs driver for the 320-1135a TouchSmart, copied all the files .exe on a CD and inserted into the 320-1135a TouchSmart.  Then I navigated to the folder that contains the drivers, but the Installer did not see them.

  Over the years I've installed older TouchSmart IQ505a several times during the same installation disc, but I could neither recall never asked for drivers to the installation of Windows 7 was complete.  Then I reinstalled the TouchSmart IQ505a, just to double check my memory.  NONE of the pilots did NOT the same Windows Installer.  He completed the Windows 7 Ultimate 64-bit install.  I then installed the drivers of IQ505a TouchSmart as usual.

  I guess what is happening here is that the 320-1135a TouchSmart requires latest drivers, or something that is not on our Windows 7 Ultimate 64 bit DVD.  So I called HP Support, only to be told that they were not familiar with the Windows 7 installation procedures and since we got the DVD from Microsoft, we have to communicate with them.  I protested "but it's YOUR drivers that's not reading.  I expect Microsoft will just to send back me to you. "- only to be told"contact Microsoft ".  Which is where we are currently at.

  Can someone help me with my dilemma.  What I have to do something with Softpac .exe files before they can be seen as drivers my Windows install, if so what?  And if that's the case why couldn't HP tell me?

  If the TouchSmart is running Windows 7 Home Premium, why don't you just try the upgrade by using Windows Anytime Upgrade and the ultimate product key?

  If the license for Windows 7 Ultimate, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Home Premium to Windows 7 Ultimate. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Ultimate edition at the request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify its update of the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.

• Hard modular E 320 GB - required Fdisk drive?

  Hi, I just got my new E6420 of Latitude and opted for the disk 320 hard modular E.

  Windows 7 does not recognize when it is in the modular Bay E. It DOES not recognize the optical drive, but not this one.

  Setup of Intel (Ctrl-I when starting) watch the two drives, the second being "Hitachi HTS72323".

  What is wrong with him?

  ... Call Support technique Dell.  The person for this purpose using DellConnect to connect to my computer.

  She used the option of research program in the Windows Start menu and found "computer management".   Inside, she sailed to the storage, disk management.   At that time, she did a Format, and then Windows 7 could see the drive.

  Good grief, why they don't include some instructions with E-Modular hard drive?

• 320 GB HD, not mounting correctly primary partition

  I just bought a 320 HD. He has a special password that rises like a CD of partition. This partition mounts (and autoruns) password correctly, but the main partition does not work. Device Manager says the disc is unreadable and partition magic wrote that the MBR is bad. Any ideas? I don't particularly care about partition password (in fact), so if the formatting is an option, that's fine. Unfortunately, the magic of partition requires that I reboot to do a full format of a disc, which of course will not work in this case.

  Hello

  I have the same problem, I want to get rid of this cdrom drive, I don't have and don't want. If year annual already received suggestions I'd be happy to hear from you. I'll do the same...
  Partition Magic said BAD. So I opted for the native XP Disk Manager. I managed to repartition etc. It does not, in my case, about 7 MB of space "unused" at the beginning of the disk, but is still there because the CD-ROM drive appears again. The only option will probably be a complete reformatting or completely-installing and removing software driver for the reader. Maybe then he will no longer be able to generate this cdrom. I'll try to do that tonight and keep you informed.

• 320-320: 1030-1030

  Hello, I was wondering what to look for if I wanted to update my 320-1030 in regards to a motherboard and processor? I was contemplating upgrading the CPU for an A8-3820 on the existing card, but now I'm wondering if it is possible to move to a faster processor (which I assume would require a new motherboard if it is possible).

  Greetings,

  I don't think you can do much in the way of the upgrade of this system.

  This siteshows all the possible processors that can run in a socket FM1. This system can not support each listed.

  Please note that the specifications is 65 watts TDP processor on your system.

  The motherboard has been designed to fit the chassis and probably has special exclusive connections that won't be may not be not available on after market system maps.

  Is probably not possible to just pop any mainstream motherboard in the case.

  Jay

• Satellite Pro P300: external resolution 1024 x 768 instead of 1680 x 1050

  Hello

  I run my Sat P300 on XP and this laptop screen is fine (1440 x 900 pixels on radeon HD 3650).

  Now, I want to connect the laptop to an external monitor flat screen, a Samsung, which requires an optimum resolution of 1680 x 1050 pixels.
  The samsung monitor works fine on my laptop more old: I close the lid of the laptop and the screen changes to the Samsung with good resolution of 1680 x 1050.

  Now, when I connect the P300 and close the lid, the screen switches to the Samsung, but the actual screen resolution is 1024 x 768, despite the fact that the 1680 x 1050 is set in the display properties windows.
  In fact, the screen is probably 1680 x 1050, but sees only the monitor 1024 x 768 (i.e. the desktop is bigger than the monitor can show, and I can push the office left/right or up/down with the mouse.

  So it appears (Hey, it's just a guess) that the radeon sends a screen 1680 x 1050 with the wrong frequency (48.2 KHz instead of 64.4 KHz as my monitor watch)!

  The Samsung drivers are installed, and I've updated the BIOS to 3.40 win, but not a solution.

  Someone at - it an idea?

  Hello!

  Have you checked the manual of the Satellite Pro P300?
  I think you should do this because there you can read why the screen resolution of 1680 x 1050 doesn t work.

  The Satellite Pro P300 supports the following screen resolutions:
  800 x 600
  1024 x 768
  1280 x 800
  1280 x 1024
  1600 x 1200
  1920 x 1440
  2048 x 1536

  Do you not see where is the problem? ;)

  Good bye

• Satellite A300 PSAG1A: Cannot display resolution of 1080 x 1050 on monitor

  I have a Toshiba A300 - PSAG1A with Vista Business.
  I want to display on a monitor to 1080 x 1050, but this is not an option in the drop-down list.

  The graphics card driver lists as a monitor generic Non - PnP on Mobile Intel (r) 965 Express ChipsetFamiy
  7.14.10.1329 driver version (13/09/07)
  I tried to date via the toshiba site but tells me that I meet the system requirements?

  All ideas

  Hello

  Did you check your user manual if this external resolution is available and possible?
  My knowledge of the user manual should contains such information.

  I checked my manual user (but not for the A300) and found useful information on the external resolution supported on my laptop satellite.

  Generally, you will be able to choose your favorite only resolution if the two parts as graphics card drivers and graphics chip would support such a resolution.
  If one of these parts would not support it, then you will be not able to use it!

• NI PXI - 8108 RT with real-time compatibility 2009 and PXI-1050

  
  

  Hello

  The PXI-8108 should work just fine with the PXI-1050 chassis. The only requirement is a chassis PXI uses a PXI controller and a SMU chassis uses a controller SMU. Since the 8108 both 1050 use the PXI standard, they should work very well together.

  Eric

• Deskjet 1050 printer, model j4: deskjet j410a 1950

  A printer Deskjet 1050, model j410a, works with a black cartridge or must be a color cartridge as well.  If it requires an as well color ink cartridge, it can it be empty?

  Welcome to the community of HP @HC44,

  I wanted to tender hand to help you with your question about your Deskjet 1050 impression with a cartridge installed. I checked the User Guide and I found below for information on the use of "mode of single cartridge". This should work for you!

  Page 31 user manual

  

  Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I've helped to achieve a settlement.

  I hope this helps to answer your question, if you have any other questions, do not hesitate to ask!

• HP touchsmart 320-1101la magic canvas disappeared

  Hello! I hope you do well

  two questions!

  My 320-1101la came up with installed W7, I decided tp upgrade at W8 because he has a huge touch screen that works perfectly . But now on W8 I can't see a magical canvas anymore, how can I return it?

  Secondly, I can't find no bluetooh on this PC, I went to HP and SW support drivers, but I did not see a pilot of bluetooh for this model.

  I appreciate your help

  Eddy_M

  Here are the specifications of your computer HP TouchSmart 320-1101la. According to the specifications, this model doesn't support Bluetooth in native mode. For this computer to communicate with Bluetooth devices, you can buy a Bluetooth USB/adapter dongle.

  It is the position of HP on the support of Windows 8 and of any computer HP have not supplied with Windows 8.

  Not all the features of Windows 8 may be available on all PCs.

  Your specific experience with Windows 8 will be determined by the capabilities of your PC.

  HP provides upgrade instructions and the drivers will be available for the majority of Windows 7 systems sold after October 1, 2011.

  If you want to restore the original operating system after the upgrade, you must create HP recovery before you put on level support.

  Please note that if you purchased your system before October 1, 2011, HP has not tested these PCs or developed the drivers for them or upgrade of Windows 8 instructions. The upgrade of these systems can be difficult, if not impossible.

   

  and

  Important information about other limitations and requirements;

  Screen resolution requirements

  Limitations with DVD playback software

  Limitations with Blu - ray playback software

  Limitations with TV Tuner software

  Secure boot & other dependent features of UEFI

  Limitations with touchscreen capabilities;

  Windows 7 (and Windows Vista) PCs with touchscreens will not have full Windows 8 touch features after upgrade.
  HP computers with hardware key designed for Windows 7 (or Windows Vista) will provide a similar experience for applications point to touch only two after the upgrade to Windows 8. Computers Windows HP with touch input material will not load Windows 8 applications that require more than two simultaneous touch points. In addition, Windows 8 shots of edge may be unavailable due to the bezel embedded on HP touch systems shipped with Windows 7 (and Windows Vista).
  HP TouchSmart and HP TouchSmart Magic Canvas applications are not compatible with Windows 8 and must be uninstalled before the upgrade. Note that the content created using applications such as Graphitti TouchSmart will be unavailable after the upgrade.

  Please click the White Star of KUDOS to show your appreciation

• HP Deskjet 1050 All - in - One J41: scan lost desktop icon!

  I had to update Windows and reinstall my software Deskjet 1050 but installation disc indicates that my computer is not compatible (Windows 8.1) and will not be installed... It requires a previous version of Windows. I downloaded and installed the drivers from the HP site but could not find the software.  Any help would be appreciated, thanks.

  mgratton wrote:

  Got, it works.  ....

  Hello

  Thanks for the info. As mentioned earlier, you will need to reinstall the software and the driver.

  Nice day.

• Backup impossible - Vista Ultimate, Dell XPS 420, WD 320 external (eSATA) drive - error 0 x 81000006 and 0 x 81000014

  Hello, I've had this problem for some time now, and it's very frustrating.  I can't save the disk correctly - there have been times that I've been able to do a full backup, but subsequent backups then failed, and other times, I can't yet do a full backup.

  I have a DELL XPS 420 PC, running Vista Ultimate.  I also have a 320 GB Western Digital external hard drive connected via eSATA.

  I had problems with backup from the beginning.  Previous suggestions have been to ensure that the drive is formatted in NTFS (it is) and to make sure that I am able to see the drive from the computer and access (I can).

  I got two different types of error messages:

  ================================
  Error message:

  The backup location cannot be found or is not valid. Check your backup settings and check your hardware configuration. (0 x 81000006)

  Backup time: 12-09-2009 01:05

  The backup location: My Book (z :))

  Error message:
  
  There is not enough space on your Windows drive to prepare for the backup of your files. At least 400 MB of free space is required to continue. (0 x 81000014)

  Backup time: 05/01/2010 18:38
  The backup location: My Book (z :))

  [Start over] [Settings] [Close]

  ==============================

  What could be the problem? What I might try?  Please let me know if I can provide any other information that might help.

  THANKS IN ADVANCE!

  Hey, Ronna,.

  Sorry I didn't saw this post earlier - I hope you were able to solve your problem.

  Here's what I figured out around miner (on mine - after hours and hours of research):

  The message 'no space' was more a message "no memory" for me - I understand that if I have a large number of open programs, that is causing the error.

  The other mistake, I was getting, it was simply that the external HD had stopped spinning - now, whenever it says backup failed because he could not find the hard drive I press the power button on the back of the drive (I have a MyBook Western Digital external hard drive 320), run it, and then it works fine.

  I hope this helps someone else.

  CJ33414