HP 5510 series on OSX Lion

My printer keeps sending "you have installed a new 564 (color here) or a 564XL cartidge (color here), you must align your printhead" messages. Unfortunately, I have not installed new cartridges and my only message options are to turn off all messages to the printer. Particularly, I don't get these messages in my 7510 serial printer. Short of every 27 minutes print head alignment, you have any suggestions or corrections to this problem?

Hello

Thanks for the post.  On this one, I could suggest (since you have not recently replaced cartridges) to go ahead and turn off notifications.  I've included the steps below.  Good luck!

Hello

With regard to alerts, ink and other messages that keep popping up after hitting OK on the pop-up.  I learned that in some products, you must actually enter the message center and recognize messages there so that the pop ups to stop.  Just hit OK on the pop up does not complete the alert.  You can Ctrl-click and select all messages and recognize massively in the message center.

Please ensure that we recognize ink alerts and others IN the message center.

If these steps do not resolve the problem, there is also the possibility to transform messages in total. Go to the HP utility, should be in the dock or in the hewlett packard folder applications. Here you have an option for the message center, there, you can go to settings at the top right, then uncheck the boxes for the Alerts view.

Tags: HP Printers

Similar Questions

  • Where can I find software for e-all-in-one HP Photosmart C310 series Mac OSX Lion v.10.7?

    I bought the printer HP Photosmart Premium e-all-in-one C310 series yesterday night and desperately need to print today.  However, the installation disc is not supported by my Mac happening on v10.7 Lion OSX.   I read on a site that I should be able to access a software upgrade via the Apple website, but could not find the last night.  Help, please!

    Also, I loved the easy set-up using the touch screen and my wireless mode.  No cables needed!   Now, if I can get any software updated today, that will be great!

    Kelly

    Your printer works perfectly in Leo.  Indeed, pilots are probably aready in your operating system.  Get the installation program and be able to use it.  We have a doc that will guide you through the process.  (It's pretty simple)  OS X 10.7 Lion: install and use the printer with Lion

  • Bookmarks drop down the list too wide Firefox Mac OSX Lion 31

    When I click on the drop down bookmarks menu, it's too wide. If there is a folder in the contents list shown far right. At the point where I'm moving the mouse on there where the contents of the folder is it disappears. Am on Mac OSX Lion. I tried to scroll on the corners and sides of the drop down list to search again for the sizing handles, but none are. It is not just Firefox 31 version as has happened for some time. Any ideas please?

    Which may be caused by the presence of a few bookmarks with a long title in the main menu of bookmarks.
    The width of a column in the list of bookmarks is in the current versions of Firefox automatically adjusted the bookmark with the longest name.
    You can check the names of the bookmarks and the longer more short.

  • Removed Mac OSX Lion on app store.

    Hello

    unfortunetlly I deleted Mac OSX Lion of appstore how can I restore OS in the appstore?

    How do you remove his, Apps in the store are not disposable

  • How can I disable the back and gestures toward the front in F9 for OSX Lion?

    The new gestures in Firefox 9 to OSX Lion, which allow you to navigate forward and backward with a sweep two fingers are driving me crazy.

    I like the idea, but it is much too sensitive. Whenever I'm trying to scroll to the top or bottom of a page (which uses also two fingers), I accidentally go back because apparently I don't have the skills to drag and down the pad perfectly superimposed.

    If the function has been adjusted so that drag it back was not so sensitive, it would be a wonderful feature. But as it is currently, it is to destroy my browsing experience in Firefox to the point where I am considering to switch browsers.

    I have not found a way to disable this feature just and only in Firefox. Help?

    You can set preferences related gesture for a string value empty on the subject: config page.

    To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.

    If you see a warning so that you can confirm that you want to access the comments: config page.

    • Use the filter at the top bar of the on: page config to more easily spot a preference.

    Filter: gesture

    Double-click on the line with the pref of the gesture that you want to disable and delete its value.

  • After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

    After a new installation of OSX Lion, I want to reinstall my firefox sync preferences. I saved my key before clening the computer, but not firefox indicates that the key is incorrect. Any ideas would be most appreciated!

    Try typing the key to recovery without 5 dashes.

  • Should I update my Mac pro OSX LIon 10.7.6 to Yosemite or El Capitan?

    Should I upgrade my OSX Lion 10.7.6 to Yosemite or El Capitan?  My Bank says that I have to go to access my account

    You will not have to you?

    Always make a backup first. Always.

  • Photosmart HP 5510 series: printer for wireless connection software installation CD

    Hi all

    I need help or advice about the case of the CD of my printer for the configuration of the wireless connection, which is HP photosmart 5510 series. I bought a new laptop, Hp Pavilion Gaming Notebook, which is 10 windows, and when I arrived to set up the configuration of the software printer on my laptop I discovered that it is only compatible for windows XP, Vista and 7, but not 10. I bought this printer about 5-7 years ago and I need to install its software on my computer for fast printing and scanning. So, my question is; "" Of where to install the software?" GOLD " What do I do about the Conference on disarmament, should I go for the customer service and ask for the latest CD or what?'.»» Need help ASAP please!

    Hello

    Thank you for using the HP forum.

    You can download and install the software COMPLETE features of HP printing for your operating system:

    http://support.HP.com/us-en/drivers/selfservice/identify?q=HP+Photosmart+5510+series&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

    Please select your printer and win 10 OS before you download and install the FULL features software.

    Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

    Hope that helps.

  • RunDLL error 5510 series after uninstall

    After an unsuccessful attempt of my parents to install a photosmart printer 5510 on their acer aspire 7741-6426 laptop with Windows 7 OS. I uninstalled both the printer and the software that goes with it by using the uninstall tool, each is came up with, then used the windows installer to remove the update from hp and a help which have been posted in the window file programs and features. after reboot I was greeted with a window "RunDLL" declaring "There was a problem starting C:\Program HP Photosmart HP 5510 series\bin\HPStatusBL.dll" I ran since the removal tool for all in one printers (gr_uninst.exe) 4 times. error continues. Although I intend to reinstall this printer I would like to start with a clean slate.

    Help, please!

    Hi Heroboy2000,

    Follow the steps outlined in the document below to install the printer in Windows 7.

    Installation of the software of the printer in Windows 7 for a USB cable connection

  • hp photosmart 5510 series: photosmart hp 5510 series files are not found

    Hello

    I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

    Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

    Welcome to the HP community @Blizzerd,

    I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

    Here are the steps for you.

    1 uninstall the printer software, and then restart your PC.

    2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

    Test print and scan and let me know what happens! I hope that does the trick

    Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

    Good luck!

  • Need help to set up officejet pro 8600 and scanning to the network on OSX Lion folder

    Hello

    I'm trying to implement my Officejet Pro 8600 more scan to a network under OSX Lion folder.  I have correctly set up the printer otherwise (and can scan and flown from my Mac).  I created SMB sharing as described in the documentation.  My only question is what to enter in the Web server of the printer when it asks for the network path of the shared folder.

    For example, I have the following shared folder:

    / Users/me/Documents/scans/Durable goods received

    on my computer that has name is:

    My iMac

    has an IP address:

    172.16.1.4

    wonder web server of the printer a network path (for example: \\mypc\sharedfolder) but I do not know how to translate my way above in the correct format.

    I tried the following:

    AFP://172.16.1.4//users/me/documents/scans/durable------Goods\ recipes

    but he doesn't like it.

    I also tried:

    Recipes of \\172.16.1.4\Users\bvz\Documents\scans\Durable of goods.

    Nothing helps.

    Thanks for any help or ideas!

    Hello

    First of all, make sure to install the latest firmware for the printer.

    SMBX (used by Lion sharing protocol) support added lately, and the device fails to access any forlder Lion shared with an older FW version:

    http://support.HP.com/us-en/document/c02919168

    You have shared the folder durable goods received ?

    If so, I guess the correct path would be as follows:

    \\172.16.1.4\Durable goods received

    Please let me know of any changes,

    Shlomi

  • How can I connect HP ENVY 110 d411a (white) for the MacBook Pro OSX Lion running through a wi - fi connection?

    And how can I use the AirPrint.

    (I'm not English, sorry for my bad English)

    1.

    Hello

    I bought a HP ENVY 110 d411a (white) on the last day, but I have different problems trying to configure it.

    I did all the settings of the printer and properly installed the CD rom on 2 PC running Windows XP. (All works) I also tried the ePrint and it works without problem.

    Problems come when I tried to implement it in my book for Mac OSX Lion running. I downloaded the "ENVY-110 - series_v12.14.0.dmg" from the HP site, but it seems that the computer cannot detect the printer wi - fi thorugh, even though they connect on the same wi - fi. Reading this forum I also installed an additional update "HP_Scan_for_Mac_OS_X_10.7_Update.dmg" and "support.apple.com/kb/DL907" Also I tried to unstall all and reinstall another time.

    I'm sure that the printer is on the same wi - fi, I know not wi - fi is active, because the other PC I can print and scan, I'm sure it has a regualr IP address, the printer is new (2 days) and my MacBook is updated to the latest firmware.

    What can I do else?

    2.

    My other question is how can I enable the AirPrint? I tried to detect the printer from the phone, but he can't find anything...

    I read that this requires an update of the printer, but I already checked the updates and it says that the latest firmware is already installed...

    Can you help at least with the first point?

    OK, thanks for that.  This problem is with your router.  Your Mac uses Hello (also called mDNS) to find your printer.  If the router does not support this, your Mac will never see it.  It is a common problem with routers provided by the ISP.

    I would recommend that you contact your ISP and either resolve the issue or give you a router that supports mDNS.  Last resort, you can get your own router and just use the modem from the ISP box part.

  • OSX Lion Scanner driver for LaserJet 2840

    Is there really no solution for Lion to Scan over the network to the HP 2840. I'm really surprised because I chose the HP 2840 because it turns out Mac OSX Support and made unter 10.4 and 10.5, even on 10.6 that I managed to make it work this time on 10.7 Lion, it would be very sad if HP not to manage to continue to support this great product.

    All advice appreciated.

    Sincerely, Adrian

    Resolved HERE: http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/HP-Laserjet-2840-How-to-fix-scanning-in-OSX-Lion/m-p/1318173#M28602

  • Since I have OSX Lion I can't print/scanning wireless more with my HP Photosmart Plus B210?

    Given that I've upgraded to OsX Lion my HP Photosmart Plus B210 stopped working corrctly.

    I uninstalled and reinstalled but ntohing worked.

    The report of the printer tells me that my printer is connected correctly.

    Have you installed using the installation disc?

    If so, make sure to install the Compatible Lion software below:

    First, uninstall completely any software installed:

    * Please note that the following steps will delete all HP software installed.
    1. click on menu go (click the desktop, then watch the menu in the bar at the top of the page)
    2. Select Applications
    3 select the Hewlett-Packard folder
    4. double-click on uninstall HP application
    5 follow the uninstall to prompt to select a device to uninstall
    6. press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall
    7 approve any prompt to uninstall all HP software.

    Then download and install the Lion software for your printer below:

    http://FTP.HP.com/pub/softlib/software12/COL39592/Al-96582-1/HP_Lion_Ink_SW_v12.13.24.dmg

    Please let me know if that helps.

  • OSX Lion Scanner driver for hp officejet 6100

    I have a pretty old but still works well HP officejet 6100. Is there a driver scanner for mac osx lion?

    Hello
    I'm afraid that scanning is no longer supported by Mac OS X 10.5 and below.

    As you may find listed by the document below under OS X 10.5, the same information applies to any newer OS:

    http://support.HP.com/us-en/document/c01234231

    Kind regards

    Shlomi

Maybe you are looking for