HP 6510 don't print in black

Similar Questions

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!

• 309g are all cartridges to be installed when the don't print as black?

  I have a 309g printer - and my partner took all cartridges leaving the printer useless. I bought and put in a black cartridge HP 564XL black. The screen says 'Ink cartridge problem' the following carts seem to be missing or damaged.

  Are all THE 5 cartridges required to install for the printer to function? Only one - the cartridge black-being installed for the printer to function does Seems to me, it should work. Thank you

  Yes, you must have all of the cartridges installed - and it is actually not good at all to leave the printhead without cartridges installed. When you install all the cartridges, you may need to perform a cleaning to get the print head working properly. Don't let your partner do this again!

  If you want to print using black only, should be a setting in your printer driver to "print in black ink only.

• Don't print any black ink - HP OfficeJet 4620 - FIXED!

  When I replaced the black cartridge with a black XL version, it would not print.  I went on this forum and saw that some had problems and were unable to solve.

  I ran printing HP and doctor Scan and after cleaning the heads, EUREKA!  It works now!

  Good luck!

  UPDATE: actually, it didn't work.  Some impressions later the printer started doing the same thing - fading out for nothing.  I ran the doctor print again and it didn't work.  Resumes the cartridge and replace it with another 564 HP cartridge and IT is WORKING now!

• L7590 don't Print Full Black Ink, the darkness is uneven

  I have an Officejet Pro L7590 and printing I cannot get all of the black ink level.  This has happened actually came out of nowhere I remember not to proceed with changes in real system before the problem started.  There are a few areas on the page that seem normal, but the vast majority of the page is much lighter.  I tried to clean the printheads twice and tried to align the cartridges without change.  I also installed a new cartridge (HP) with no difference in print quality.

  I read the article online about this problem (uneven printing black ink), but it seems to refer to older models since my cartridges have no contacts like the ones listed, or parameterized properties options in the same way.

  OfficeJet Pro L7590

  Windows 7 Ultimate (64 bit)

  Portable, connected wireless to the router connected to the router via ethernet, computer printer

  Hello
  
  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps. Such as a ditch last effort, some have found soak their print heads solved problems like this. The check out this post from bob_headrick that has a few basic steps for him.
  
  Good luck!

• I have a Photosmart 6510, which will not print in black.

  My photosmart 6510 does not print in black, after that I installed all the new HP ink cartridges. I am running Windows Vista 32-bit.

  I tried all the basic tests & troubleshooting but who still have the problem.

  It allows to print from the photo tray 4 x 6 end.

  Help, please!

  Steve

  Hello bcgoodwrench,

  I don't see you mention the presence of 'BLACK'.

  
  If there was no black printing, then I would say you call the HP Technical Support for assistance.

  If you are in the United States, the toll free # is 1-800-474-6836 .

  If you are not in US , then log on to www.hp.com , bottom left there is a world map icon, click it, and then select the region that you belong to, which would then provide the support options for you for this region.

  Kind regards
  Jabzi

  Help the community by marking this post.
  Your question has been answered? Mark it as a accepted Solution!
  See a great post? Give it a Bravo!
  I work for HP

• Photosmart HP 6510 will only print black light gray text

  Any suggestions on how to solve this problem.  Been thro all the habit change the cartridges, clean the heads (several times), align the cartridges.

  Problem started after the low ink warning and then change cartridges.

  Need to BEST print mode to get the light gray black text only printer and printing grayscale value must be set to OFF, otherwise no visible impression is reached.

  Colurs look OK on the Test print but once again no sharp black, light not gray see the upward.

  Help please!

  Hi SportBilly15,

  Welcome to the HP Support forums.   I understand that your Photosmart 6510 is not printing black ink properly.

  I've included the document setting the streaks of ink, faded prints and other common print quality problems . It takes you through several steps to correct the problem of troubleshooting.

• 6510 all-in-one does not print in black

  Hello

  So my off-warranty 6510 has started to not print in black. I bought this in August 2012, and it has been pretty reliable.

  Now it just won't print black. I searched through these forums and I feel like a big community now - I'm not alone with this problem.

  I did print without end cleaning of the printer head and my PC (until the option has disappeared!). Print head alignment failed. And I have replaced the cartridge.

  As it is not in warranty, I took the print head and gave him a * beep * clean. When he was replaced, it only printed a page in black (bad), then no more.

  Print in color if fine, except now (after that numerout head cleans) most of the ink levels are low.

  Stupidly, I expect a miracle and that a HP representative will respond and provide a kind of solution, but I think I know it's out of the dumpster. It'll be the 3rd death of HP printers in 4 years (the first 2 were replaced by the store - Costco).

  At least now that my stock of cartridges is exhausted, I am not bound to HP again as if I was the last time.

  Sort problem. Thank you very much for your support.

• 6510 leaves suddenly printing black ink - cartridge is new

  Hello

  My Photosmart 6510 suddenly left black printing.  I replaced all cartridges, including the black a couple of weeks, and it was working fine until I went to print something from yesterday. Color work, but not black.

  I did everything on the link that has been suggested for troubleshooting and the unit is out of warranty of course.

  Are the only changes that took place between the time where it worked and did not work: 1) I installed Windows 8 and 2) I tried to make a copy of a label of the bottle, if the lid did not seal.  The first copy was dark, so I tried again and it's while doing the copy that it has just printed a page of black streaks.

  Since then, no black although when I made the diagnosis, it prints grey black.

  Thanks for your suggestions or help!

  I've tried EVERYTHING!  I finally tried printing on a Pope of photography and it worked, I went to 'preferences', then 'quality of paper' and changed other papers photo instead of plain paper.  I have kept the main tray paper source, but replaced by "draft" so that it doesn't take too long to print.  It prints very well now, but you may need to do this each time you print something.  It works at least for the moment.  It's certainly the last HP all I'll never spend money on.  The last HP laptop, I had was a lemon and through too much with it.  Hope this helps you...

• My photosmart printer 6510 prints only black

  My photosmart 6510 prints only black & white with my mac test i is printed 4 color bars

  Looks like the wrong driver is installed. Try to remove and time the printer and check which driver is used.

  Go to system, then print and fax Preferences (print and scan over 10.7), then highlight the printer and go to sign less down to remove it. After that, click on the plus sign to readd it. When you highlight in the list of so that the background box should tell the 6510 print using, if it says something else bad driver is used.

  If this is the case, you have a few options. Try to run an update of the apple software, it can find a printing hp update software, install that, if she does and try to add the printer again. If it still fails to solve, the next option would be to reset the printing system

  To reset printing system go to this window print and fax again and the white box where the printers are listed on the left hold down the CTRL key and click. This should give you an option to reset the printing system. This will remove all of THE printers that you have added, so if you have others you should readd them. After that itll request your password, put it in to confirm, once thebox restart the mac, and add the printer again.

• I don't have that black ink I'll still be able to print on my hp series photosmart more b210

  I have an HP Photsmart B210 Series printer but I don't have black ink. I get a msg "ink cartridge problem"... I can print with black ink only or do I need to have all color cartridges to print? Thanks if you can help...

  Sorry, but you will have all color cartridges in also, so that the printer to operate. The reason is that all the cartridges color another use to mix together to make a true black print. If you have color cartridges that are WEAK, it may work for a while, but it cannot work without. Thank you, hope that helped.

• Photosmart HP 6510 will not print black text of emails but ok for photos and web pages

  Suddenly, it stopped printing black text of emails but prints black on web pages and images. I renewed the HP black cartridge and downloaded the HP PHOTOSMART FULL FEATURE AND DRIVERS SOFTWARE today and the problem persists.

  When I print QUALITY REPORT printing any black ink level is shown, but black media are there. very strange.

  Can I please ask your help to fix this annoying problem for me.

  Thanks for the reply daveclix

  I agree that this is not a problem with your PC, it's a hardware problem with the printer. The information you supplied I'm going to send you a private message to discuss the next steps to take

  If you are unsure how to check your messages on the forum this post, has instructions.

• Photosmart C620 don't print black... not even with new cartridge

  Have tried everything that your support page & help screens indicate:

  was originally only print up several inches of page

  now does not print any black text

  unplugged

  Diagnostics pages... shows no diagnosis, no black square, the squares of color are very sharp

  test pages are empty

  printer is not installed

  reinstalled printer

  clean the heads

  bought the new black print cartridge

  STILL NO BLACK...

  C6280 has the printhead and ink cartridges that are separated. This resembles the printhead may be bad clogged or has failed.

  I would say try "clean printhead" a few times more, if still no black not printed, the print head may have reached its endoflife.

• HP4480: will not print in black

  I have recently upgraded to the version of windows in 10 home edition 1511.  I have a HP4480 that is compatible with windows 10.  It is updated with the correct drivers.

  My printer will be printed in black and white if I copy a document on the printer, HOWEVER it will not print in black and white if I print a document on my laptop or from a Web page.  I'm also using Microsoft Edge.

  I run Scan Doctor, clean my print heads, made sure everything is aligned, but can not determine why I can not print in black and white the computer laptop but can from the printer.

  The diagnostic message only I received is "peripheral composite USB does not work with USB 3.0' I have no idea what this means and don't think that I have the choice for the ports on my Inspiron 15R laptop 5520.»

  I've also posted on the Microsoft forums but really need to get the printer works with the operating system and cannot afford to buy a new printer just because I upgraded.

  Any help is appreciated.

  Thank you.

  Janet

  I solved the problem.  For some reason, my real print HP 60 cartridge was the question.   Almost empty, I left forward without problem.  Once I replaced the cartridge, all now print correctly in black and white.

• OfficeJet 6700: print in black only

  I am wanting to print in black only. I removed the color cartridges printer doesn't like that we

  So, how can I disable the color cartridges?

  John

  Hi jozz71,

  If you are wanting to use the black cartridge for printing, you can follow step 2 in this document to change the print settings to print in black and white:

  http://support.HP.com/us-en/product/HP-OfficeJet-6700-premium-e-all-in-one-printer-series-H711/4322971/document/c04331666

  Please be aware that you don't need two ink cartridges to print.  The printer uses little color for printer maintenance.  This interview is described in the document I have attached.

  Once the color cartridges is completely exhausted you must replace it in order to print.  After this setting the printer to print in black and white will minimize the used color and make it last longer.

  I hope it's useful for you.

  Jean