HP 800ps: misaligned print heads and tracking errors

Similar Questions

• Problem with Notepad printing header and footer

  How can I get rid of the header and footer when I print something I wrote on Notepad.

  It does not show the on the notebook until I print it.

  In Notepad, use file > Page Setup to change the headers and footers.

  See also: https://support.microsoft.com/kb/78790

  That came in this research: https://www.google.com/search?q=windows+notepad+header+footer

• OfficeJet pro 8500: print heads and things

  OK, maybe it's a bit confusing. I have three printers Officejet 8500. No. 1 went into a never-ending cycle of clean print heads (after more than 30,000 pages) and without me being in the room the right side of the printer depot of ink on the table. Tried the reset but not good. Bought a second hand and after a few weeks, it came in paper jam mode. Could not resolve so finally bought number three. Works a treat and has no problem. Numbers one and two are for recycling. Print heads removed and stored in an airtight box with damp cloth. What is staging. Now after spending all that money, the last thing I want, it's having problems with number three. However, I have three cartridge sets new and unopened from PC World (their own brand) which cost £39. They came with the number two of the machine. They are not dated and has no way to know at what age they are. They are not oem, I can't any advice on their likely performance, but what worries me, is can the ink begins to solidify and block print heads as they age? Like I said they are still sealed. If I change the cartridge and use a spare set of the print heads to check the print output and that something is wrong if I can swap cartridges and print heads back without the printer enter the cycle of constant head cleaning. I know there have been issues with these printers but mine is on 27 000 pages and all tests are reports back in good health. I have also several chips of HP cartridges genuine that I can use.  Sorry as that a little long-winded.

  Hello @notahappybunny,

  Welcome to the forums of HP.

  I understand that you have some questions and concerns about your ink cartridges non OEM 8500 and some.

  I would like to help.

  The following document explains on the expiry of the ink.

  Consumable inkjet HP - ink Expiration

  From what I've read, it's I think I understand that the ink may change over time.

  Because ink is sealed I don't think they're going to solidify, but the pigment used in the ink may eventually separate from water. This will certainly cause print quality problems.

  In addition, your first 8500 printhead might not be good.

  A bad print head may cause the impression of entering the cycle without end cleaning.

  I hope that I have answered your question.

• 4620 prints extra blank page except for her print header and footer on the blank page

  4620 all-in-one, I am trying to print an email from the firefox browser, there is only a single page, but the printer prints 2 pages. The second page has only a header and footer on that printer. I only want a page and select 1 page, but still.

  Hello and thank you for the HP forums. To resolve this problem, you must first restart your computer. Holder of restarting the computer, unplug the power cord at the back of the printer, while he is always under tension. Unplug the power cord from the power source and wait 30 seconds. Plug the power cord directly into a wall outlet (not in a surge protector) and connect the power cord to the back of the printer. Repeat the print job. If the problem persists, try using a different browser such as Google Chrome or Internet Explorer.

• Poor print quality. Trying to re-clean print heads and I get the message "printer is busy".

  HP Photosmart 7515 roughly a month.  I had reports of printer including the ink level and Page quality Diagnostic impression that leads me to a printer head cleaning. Always do not print correctly then I pressed the button for a second level print head cleaning and received the message returned as the "printer was busy" and here I am stuck.

  Cartridges solved the problem.

• HP photosmart premium C310: cannot print black despite installing new print head and cartridges

  Have completed all troubleshooting steps right through the replacement of the ink in the print head with a brand new and of news. Desperately the still not printed in black.

  Is there anything else I can do?

  Hello

  Please try to CLEAN print head for at least 3 times.

  On the printer control panel.
  1 > tap Settings, then
  2 > touch tools, then
  3 > touch clean printhead

• Print head and Officejet 6500 ink system failure problems

  I have the Officejet 6500 wireless and it won't print.  It says ink system failure and head print seems to be missing or damaged.  Today, I installed new HP ink cartridges.

  Is it possible to check to see whether this printer is kaput?

  There is a document with steps to help treat herelocated ink system failure messages.

  So, for the question on the print head see the document here.

  I hope this helps.

• I have the print head and the alignment of the problems with our officejetpro8500 910 a.

  We noticed that the cyan ink was not printing. The product is out of warranty about five weeks before we noticed a problem. We have replaced all the ink with the new hp ink cartridges. We have tried printhead cleaning several times until the third level cleaning when cleaning the print head has failed. We tried to align the printheads without success. We have been dealing with this during more than a month now. We have only 440 pages printed during our first page of self-test diagnostics. Our print head shows that it is under warranty until April 4,2012. We consulted a repair center. We have exausted all the other options until the replacement printhead. We changed to print in black only. Now, she wants to print a test page everytime we try to print something. Ink, we bought at costco for this printer was a third of the price of a new model of 8600. Please help before my wife beat me with this printer!

  If the printhead says it expires April 3, 2013, so the date of warranty.  You should be able to get a replacement print head by contacting technical support of HP and good news, it should be free, since the part is under warranty.  You can join the 1-800-474-6836 technical support to the United States and the Canada International users click here.  Let me know what happens.

• Cannot install Blue Squirrel ClickBook "print processor does not appear to be installed corectly. The printer name is invalid. "Printer - 20 and 1798 error error code"

  OT: Print processor.
  During the installation of Blue ClickBook squirrel (for windows7) I get the message "the print processor does not appear to be installed corectly.  The print processor is unknown.  The printer name is invalid.  Also "printer error code - 20 and the 1798 error.»  I need CBWP. DLL to work properly in order to be able to use this program.

  Hi Chancey,

  1. are you able to install other applications?
  2. are you able to print from other applications?

  If the problem is with the book in a Blue Squirrel click, then I suggest you to contact the manufacturer for support.

• E all-in-one HP 3520, ink cartridges are full but are only printing header and footer in blue?

  performed a test page to the printer is only printing in blue ink. printer is running on Windows 8, please let know us if I need to re install or download updates

  Hi Colleen48,

  I see that you are having problems with your printer.  I have a few questions.

  When you print the test page only blue ink prints?

  When you print only blue ink is printing?

• My PIXMA MG5320 has error U052-' the type of print head is incorrect. Install the correct print head

  My printer has stopped between different documents with the printing error U052.  He has said, "the type of print head is incorrect.  Install the correct print head. "I couldn't find help on the support page.  A YouTube video showed me how to get out of the print head and clean it manually.  I did this and reinstalled my ink cartridges.  I still have the error.  I can't align my printhead.  Buy a new print head or I have to buy a new printer?  I love this printer!  He is a year old.

  Hi Brooks14,

  If your printer was purchased less than a year, we will be able to replace it under warranty without having to buy a new.  Since you've already tried it replace unsuccessfully, I recommend to use the link contact us to contact our support staff that can go through your warranty options

• MP830 print head error message

  After that I put in a thick black cartridge in my printer MP830, it comes up with a message saying

  "The type of print head is incorrect.  Install the correct print head.

  I have nothing else except put in new black ink cartridge (a small one) then needed large one done and had to wait for a delivery of clips for the larger cartridge.  Installed black cartridge thick and error message as above.

  I removed the print head and reinstalled according to Karl1, expert in products, turned on and outside; repeated head print reinstall and same message referred to in paragraph 1.

  New print heads are $249, which is ridiculous, and this seems to be one problem with others with this product.

  Help please.

  I saw that you answered, but I can not find your answer.  The only one is the answer you gave to mags which was the same problem I had.

  email me at (MOD NOTE: Email address removed in accordance with Forum guidelines) with how to get your reply and a resolution of this seemingly common problem.  I need to print and go buy another printer, but not a Canon, if you can't come up with a good solution.

  Mary Ruth

• How can I remove the printhead on serial printer F4400 clean and replace the print head?

  I have an E error on the printer and when I replaced the black ink, that he stayed like this, I see the print head and I think it should be removed, because it shows the black ink.

  No the solution did not work, I will buy a new printer soon. Thanks for the help, I thought I understand there is not a print head to remove.

• OfficeJet HP 6830: 1 year older printer print head Error Message

  Continuous "Problem with printhead" error on my printer at home. Am (was until today) an instant ink Subscriber. Running through the provided tool on your site, my printer is "out of warranty" since December 26, 2015. How can I do to get this fixed or replaced? I've read THAT a LOT of people have this same problem. Is this a known issue with faulty hardware?

  I didn't know that HP has been in the game 'self-destruction printer. 1 year is unacceptable in the life of a printer at home. If it can not be covered by your business, is it possible to fix me?

  Hello! Welcome to the HP community @MMPhishkid,

  I understand your Officejet 6830 displays an error "print head", and I wanted soft hand on it. Unfortunately, you will need a new unit altogether away from the error message. HP may have spare for you printer options. I'll leave their contact details below for you to contact them with your next printer options.

  I know that it does not help to solve the current problem, however, I hope that this information has been useful.

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Contact HP:
  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• Why print head hits the sides of the printer?

  I have a "Hp Photosmart c5380 All in one ' and I don't know what to do with it. It can be fixed with a new headprint or should I throw?

  I tried all the things people were saying on the internet: a full reset on a menu hidden in the printer; cleaned the strip of celluloid at the back of the printhead and... nothing... headprint hit the sides of the printer.      I had to get out of the print head (without print head and cartridges inside) so I can try without it, but the printer does the same thing. What can I do?

  At this point given that the error message cannot be allowed to access the menu, and we did the resets mentioned in the posts above on this thread, sought to replace the product. You can always take part in the program of upgrading HP. This is where you can find to get a camera reconditioned with a warranty of complete plant at a reduced price. The number for U.S. and Canada customers is 800-474-6836. Other clients can find the contact information for HP at this link here. I hope this helps.