hp 940c printer: HP will provide a repair for 940c manual?

Similar Questions

• My computer is silent. I think XP audio drivers are corrupted__If I install Windows 7 Home Premium Upgrade it will provide new drivers for sound card?

  My computer fell silent months ago after a download. I checked the healthy zone and everything is on and not anywhere in the system. I did a scan of unknown quality and that indicates a problem with the audio drivers. I tried to download new divers from Microsoft.

  Rather than spending all the resources on the Windows XP system, I am considering Windows 7 Home Premium Upgrade. Upgrades include new audio drivers which will replace or overwrite the existing problem and make it all work as it should again.

  You can not spend XP as it's a clean install to get W7 on your PC.  To help transfer data documents, use the transfer on the W7 DVD program.

  Before doing that I suggest you download the Advisor to upgrade to W7 from Ms. If your PC passes, then you go to the next step which is download W7 drivers for your video card, sound card, printer, etc. and their storage on a USB for post install W7.

  If your PC isn't at the height (lack of drivers for one or more of your cards), then I would stick to XP. There is no guarantee that Vista drivers work in W7.

  If you stick to XP, download the drivers for specific sound card XP the PC manufacturer's Web site, they can be more up-to-date than those at Ms.

  See you soon,.

  Jerry

• When you will provide pilot 6500n for the lion of beef?

  Printer 6500n purchased, which operated wireless using beef system. I've upgraded to lion ox, is not supported. My question is what hp will modernize drive for this operating system?

  Hello

  the printer make compatible with Lion.

  Just to make sure that we have both refer to the same prioduct, it is the HP Officejet 6500 wireless (E709n)?

  If so, follow the steps below to install the printer:

  http://support.HP.com/us-en/document/c02911238

  If not, please specify the exact printer model.

  Kind regards

  Shlomi

• wf3540 has stopped printing PDF will send not even for printer

  Can print from word or by e-mail, but cannot print from pdf file.  Will not send a printer.

  Could check you your exact version of the player (with open reader, select help > about Adobe...) Reader)?

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• This is a repair permissions. WARNING SUID File System/Library/Core Service/Remote Management/ARDAgent.app/Contents/Mac OS/ARDAgent has been modified and will not be repaired

  I ran repair permissions in disk utility. the latest information that printed was, (warning SUID FileSystem/library /CoreService /RemoteManagement /Contents /MacOS /ARDAgent ARDAgent.App) has been modified and will not be repaired. This warns something that I really need to worry. Also, how can it be fixed

  Don't worry about this.

  Utility disk - permission errors, you can ignore

• Whenever I have print to the shared printer on my desktop Windows 7, the print job will just sit in the print queue.

  Whenever I have print to the shared printer on my desktop Windows 7, the print job will just sit in the print queue.  If I stop and then start the print spooler, the job will print.  It happens from an XP laptop. Print jobs sent from the computer Windows 7 local print just fine.

  How can I solve this one?  :(

  
  

  This problem with some windows running portable computer particular Xp and windows 7 family

  Hello

  Thanks for posting your question in the Microsoft community forum!

  I understand that you can not print over the network. I will try to help you with this question.

  (1) did you make any changes before the show?

  (2) you receive an error message/code?

  I wish that return you these items for you help in detail.

  Method 1: Open printer troubleshooting.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2: Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 3: Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-a-printer-on-a-home-network

  Also applies to Windows 7

  Method 4: Troubleshoot network printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Also applies to Windows 7

  Method 5: File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/file-and-printer-sharing-frequently-asked-questions

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Warning: the file SUID ' management/ARB managementManagement/ARDAgent.app/Contents/MacOS/ARD System/Library/CoreServices/Remote agent. A PP/contentsAgent"has been modified and will not be repaired.

  WARNING: SUID file will not be repaired kernel of the system/library/services/distance

  If the question is what do I do about this, the answer is nothing.

• Satellite A105-4384: Vista Print Spooler will not continue to operate

  I upgraded my Satellite A105-4384 to Windows Vista professional. I downloaded all the updates driver from Toshiba Web site and since... my willingness to print spooler service is running do not.

  It starts without error but dies immediately. Please provide a fix for this. FOR INFO. He died w / no installed printer.

  Hello

  I don't know what exactly, but I wonder if the print spooler service has something to do with Toshiba directly or maybe you should ask Microsoft which is bad it.

  I use Vista Ultimate on older Satellite M70 and I can print all my Word documents.

• I tried to buy my book - DEFAULT TEXT - your book seems to have default text that has not been modified. Printed books will not include this text. This means all my text will not print?

  Using OSX El captain on a desktop iMac. iPhoto 9.6.1

  I tried to buy my book - this box appears - TEXT by DEFAULT - your book seems to have default text that has not been modified. Printed books will not include this text. Does this mean that all my text will not print?

  I've been twice now and change the text of Bradley Hand to the Blackboard to Helvetica Neue - which seemed to be the default. Message remains displayed. I don't know what else to do. This is my third book over the years, but the first with this problem. Can someone advise please?

  Thank you Davina

  It is not a problem of fonts. It is the problem of the sample text entered by the models.

  The error message means that there is a text field in your book which is still on show at the text included by the model, and you will need to replace this text with your text. This textfield might be hidden behind a picture.

  If you create a preview of the book, such default text is omitted. Have you compared the preview of what you see in iPhoto? Text that shows in iPhoto, but not in the preview will be such default text.

  For example, the section 'Topic of this book' on the flap back in some themes is a default text that should be replaced by your own legend:

  

• Repair disk indicates: WARNING: SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" file has been modified and will not be repaired.

  My computer is slow, so I did a repair disk with disk utility. It shows the following message: WARNING: SUID "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" file has been modified and will not be repaired.

  This is what significantt and what I need to do.

  In addition, anyone recommend a good antivirus, malware application; or is the system Mac enough? Wharton could I do for optimization?

  1. it is normal. You need not do anything.

  2. unless you use Windows on the computer or often to share files with computers running Windows, it just Synchronize Mac OS X and use your common sense.

  (138148)

• HP b209a printer range will not connect to router comcast using the WPS button

  HP b209a printer range will not connect to router comcast using the WPS button. I try to use a new Comcast router (technicolor TC8305C). When I try to connect the printer times out and says that no connections are when I check for wireless connections. Yet, when I print the network configuration page, the SSID for the new router is at the top of the list. I reinstalled the software by the support of Comcast, but it did not help.  I'm ideas please help!

  Thank you

  Never use WPS to connect.  If done it should be disabled in the router for security reasons.  Connect manually via the SSID and password following the instructions in the manual.

• PSC1510 .my printer is will minimize the paper.

  My printer is will minimize the paper.  He takes a sheet too far through reports about 3 inches and then a paper jam.  Erasing it has no effect. the same thing happens with the next sheet, etc.

  Follow the steps in the document located here for the procedure help fix and avoid future paper jams.

  If the steps do not end the question of setting, then you will need to consider alternative options. Have you thought about contacting HP Support on the upgrade program?

• I am not provided with drivers for my dell inspiron 1520, please tell me if the drivers will be provided later

  I use windows 8 (excerpt from developres of windows). I am not as much with the graphics drivers for my dell inspiron 1520 please tell me if I will be provided later or should I reintall windows7 in my system.

  On Monday, February 6, 2012 18:28:04 + 0000, Maaz Ahmed98 says:

  I use windows 8 (excerpt from developres of windows). I'm not as much with the graphics drivers for my dell inspiron 1520, please tell me if I will be provided later

  It is the manufacturer of the equipment, not Microsoft, to write
  and make available to download these drivers. Especially if your
  equipment is older, it is quite possible that the manufacturer decides
  that he is not worth his time and effort to develop drivers for
  equipment he sells is no longer.
  Check with the manufacturer to see if they will provide a driver, but
  Be aware that they may not yet have the answer for you.

  or should I reintall windows7 in my system.

  In my opinion, unless you have a spare computer to install it, and
  enjoy software testing and reports bugs to Microsoft,
  install the software before it was dismissed is looking for trouble.
  Yes, you can install the test version, but for almost everyone I
  strongly advise against cela and wait until it is
  out.

  Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
  Please reply to the newsgroup

• The printer error will not fade

  HP 1350 printer showing jam, it is clear and will be printed test page, remnants of the error and does not print. Printer has been restarted; computer has been restarted. Printer has worked very well so far.

  Hi, ChristineBecker,

  Try the following:

  Right click on my computer

  Select manage

  Click on Device Manager

  Click on the + sign next to the printer

  Right-click on the printer and select uninstall

  Click on the + sign next to the imaging device

  Right-click on the printer and select uninstall

  Click the + next to Serial Bus Controllers

  Right-click on the printer and select uninstall

  Restart the computer

  Windows will reinstall drivers

  Go to the manufacturer's website and search for updated printer drivers

  Message has disappeared?

  Start > type services.msc

  Scroll down and right-click on print spooler

  Select Properties

  Click on stop

  Wait for Windows to stop the printer

  Click Start

  Wait for Windows to start the printer

  Under Startup type, select automatic

  Close this window

  Shutdown computer

  Unplug the cables for printer from the computer and the printer.  Wait 5 minutes and reconnect them to the.  Turn the printer and the computer.

  Message is now gone?