HP 95 LX which ac adapter?

Similar Questions

• P3K49EA: How do you know which wireless adapter you have?

  Hey,.

  I was looking at the Wi - Fi drivers for this specific unit but for many other portable, I can find the drivers for the network for a series of adapters Wi - Fi, like Intel, Realtek, and Qualcomm.

  Many times, a way to solve the problem of falling of the internet is now by installing the last Intel Wi - Fi and Bluetooth card, but there are other drivers for the cards made by other manufacturers, how do I know for sure that my device has a processor intel Wi Fi adapter?

  I don't know that, in some cases, you can check back and see exactly which wireless adapter you have, but who are these dependent region?

  For example. each laptop, Pavilion, envy and water courses that are sold to the United Kingdom, all have an Intel wireless adapter? and if it was a laptop computer with an AMD processor and chipset?

  Really looking forward to hearing from you guys.

  Thank you

  Steven

  I suspect that you have installed the Realtek wired ethernet driver and Intel wifi driver. Only the driver for the hardware you have installed. In fact, the tag on the laptop won't tell you much. If you look to the top of the support page for your specific model, it will show the drivers for all the optional features available in this series of models. And Yes, the wireless cards can be region-specific. The regulation on radio communication varies around the world. That's why several wireless drivers are listed, some of which you can't use. Unless you are having problems just use office supplies Windows driver. If there is a problem, it may be necessary to know your specific hardware so that you can find a more specific driver from the manufacturer's Web site, or you can search the Internet for other people having a problem with this specific device and use other suggest drivers. I hope that this is a logic.

• Which DVI adapter is better?

  I connect an older cinema display 23 "monitor to an old MacBookPro of a year.  I have two cards, a Mini DisplayPort to DVI and HDMI/DVI.  Both work.  What is the best, or there is no difference?

  Thank you.

  With the help of the adapter HDMI releases a Thunderbolt port, which uses more than just a screen connection.

• I have 2 HP adapters, how do I know which AC adapter fits my printer?

  I have 2 printers HP all-in-one, one is a 7210xi all-in-one and the other is a HP Office Jet 5610 all-in-one, The 2 adapters are: 0950-4483-LA and 0957-2153.  How will I know what adjustments to adapter AC the all-in-One HP Office Jet 5610?

  0n the printer, near the power plug should have a detail of the food, something like ' 32v 1.» 5A", that correspond with the same on the adapter. In addition, they are color coded and some has a key, so the evil one probably wouldn't be good anyway.

• NIC team Active standby failover - how to see which physical adapter is actively used at a specific time by a VM or VMKernel port

  Hello, simple question.

  I have a vSwitch with two portgroup VMKernel. The switch is connected with two network adapters. The failover policy is set at the level of Portgroup. PG1 has active nic1 and nic 2 in standby mode. PG2 nic 1 standby and active NIC 2. I want to know via cli or gui, command which nic is actually used for a portgroup at a specific time. Is this possible?

  Thank you!
  Francesco

  You can see the active uplink for each vNIC in the network view (press 'n') with esxtop (r):

  

• The Linux host, guest of WinXP, host has 2 network cards, how to choose which NETWORK adapter to use?

  I know it's something of an FAQ, but several hours spent on these forums and Google search gave me nothing of what works.

  All the solutions I've seen assume Windows as host and (something) as a guest.

  In my case, the host is Linux (CentOS 6.4) and invited is Windows XP.

  The host has two network cards, one on a 10.x.x.x network and the other on 192.168.x.x network.  In the guest virtual network adapter connects to the network 10.x.x.x.  I want it on 192.168.x.x network.

  I would be happy if I added another virtual network card and one of them connected to each network, but two of them connect to the 10.x.x.x network (with 10.x.x.x different IP numbers).

  The solutions I've seen indicate that under the Virtual Machine-> network adapter settings-> network connection, you click on the button "Configure the adapter" and load of come from there.  It would be great, but I have no button "Configure the adapter" or something like that.  I have a button "Advanced", but that just allows me traffic into and out of the butterfly and set a new MAC address, that's all.

  Because the host is Linux, I have also no equivalent to vmnetcfg.exe, at least none that I can find.

  So, where should I go from here?

  VMware Player is the version 6.0.0 (freshly upgraded 5.0.2 this afternoon).  I tried with version 5.0.2 and got the same thing.

  Thank you...

  Eric / www.rkt-tech.com

  You will need to use the virtual network Editor, although first you may need to create symbolic links.

  The first symbolic link already exist in a Terminal using the following command. Note: If connected a root the sudo command is not necessary when the.  Tip: Copy and paste the commands!

  ls-l/usr/lib/vmware/bin/vmware-netcfg

  If it exists, the output should be similar to the following.

  lrwxrwxrwx 1 root root 13 29 Sep 08:17 / usr/lib/vmware/bin/vmware - netcfg->/usr/lib/vmware/bin/appLoader

  At this point, you can simply use the following command to bring the virtual network Editor.

  sudo/usr/lib/vmware/bin/vmware-netcfg

  However, if you want easier access creates a symbolic link in: / usr/bin

  sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg

  If the symbolic link/usr/bin/vmware-netcfg does not exist, then use the following command.

  sudo ln-s/usr/lib/vmware/bin/appLoader/usr/lib/vmware/bin/vmware-netcfg

  Then, to facilitate access to create a symbolic link in: / usr/bin

  sudo ln-s/usr/lib/vmware/bin/vmware-netcfg/usr/bin/vmware-netcfg

  To bring up the virtual network in a Terminal editor use the following command.

  sudo vmware-netcfg

  In the virtual network editor disable automatic bypass on vmnet0 by selecting the network map target in the bridge to: list box.

• Tecra S1 - WLAN adapter and which WLAN driver

  Hello

  I use a recently purchased pre-owned Tecra S1 (model PT831E with Intel Pentium M 1, 5 GHz).
  I am unable to know which WLAN adapter is built in this book. No wireless network adapter appears in the Device Manager pane. I downloaded all the Tecrta S1 WIFI drivers from the Toshiba Download Center. I tried to install, but none worked.
  Can someone tell me how to identify the right WLAN adapter and which driver to use with it?

  Thanks in advance

  e trader_2002

  Hello

  I found the news following the wireless cards are compatible with your laptop model:

  LAN card wireless (802 11b Agere) PA3189U-3MPC
  PA3266U-1MPC (Intel 802 11 b) wireless LAN card
  PA3236U-1MPC (Atheros 802 11 a & b) wireless LAN card
  PA3267U-1MPC (Intel 802 11 a & b) wireless LAN card

  I don't know which you have, but all drivers should be available on http://aps2.toshiba-tro.de/wlan/

  Good luck!

• Trying to copy a video on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Trying to copy a video to my iPad Pro on my DVD recorder via AV connection with adapter. Audio is fine, but no video on the screen

  Which sector adapter are you using?  The digital adapter AV output is digital, which is not compatible with analog VCR.

  iOS: on adapters AV digital Apple

• 11.1.1.3 FDQM adapter file names...

  For Hyperion 11.1.1.3 FDQM which files adapter should I use?
  Please let me know the name of the .xml and .dll files...
  
  Can someone support me giving the link of OBE Hyperion FDQM 11.1.1.3.0 installation and config tutorials page?
  
  So far, I have used FM11x-G5 - C.xml for financial management, FM11i-G5 - C.xml for IC and fdmFM11xG5C.dll for you register adapter.
  
  Published by: Tony M on July 21, 2010 12:39

  I guess that you connect to HFM. 11.1.1.3.0 you should use the FM11x-G5-C adapter. Download the map contains the file FM11x-G5 - C.xml, which is the XML adapter and also contains a folder "components of the card. The adapter components must be placed in the folder of shared components of FDM and the fdmFM11xG5C.dll file should be saved in this folder to register the adapter.

  You have the correct files.

• Measure calories burned when using drive

  Hello

  The question I have is will be your Apple Watch measure speed of combustion of different calories for the same distance at the same time, when to do using workout app as opposed to not use the app to drive?

  The reason for the question is that I read by using the training app, Apple Watch switches on the relevant sensors. Does this mean that these other motion detectors are normally off and if that affect the accuracy of the measure of calories burned during exercise?

  Concerning

  Hello

  Yes - followed by an open-air market, for example, through the training app can result in a more accurate estimate of your active Calories burned during this activity.

  When follow you an activity using the application of the training session and specify a type of activity, your watch uses the most appropriate sensors and data sources to estimate the outcome of this workout.

  For example, when you save an open air market:

  • If you also take your iPhone along (with compatible Bluetooth and location Services), your watch can access the GPS of the iPhone data when estimating the PACE and distance.
  • If you do not take your iPhone along, the watch relies on data from the accelerometer in the estimate of the PACE and distance.
  • Data from the heart rate sensor is used during the estimation of the Active Calories, including calculations which are adapted to this type of activity specified.

  Calibrate your watch also helps to improve the accuracy of the different estimates made by the activity and workout app app. More information and instructions for calibration of your watch (including to reset all calibration data) are available via the link below. Estimates of the results will also depend on your personal information. To verify that this is correct - and update over time:

  • On your iPhone, in the application of the watch, go to: My Watch tab > health > edit - tap and adjust the settings, then press on in fact.

  More information:

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

• Training app IWatch

  I was suspicious of the accuracy of this app to drive so I just did a little test. Sitting at my desk I turned on the indoor cycling workout and he began to credit me with calories burned at a high rate. 60 calories 10 minutes and I do nothing. As soon as I stop the id of the workout drops to almost nothing, which is what I expected because I'm stationary. With cycle workout on it also gave me credit for exercise again when I'm actually walking I get very little credit for exercise and calories burned is a rate lower than me, sitting at my desk. No sense to me. Does anyone have any ideas or an explanation? Guess that's the reason why I can't abandon my fitbit.

  Hello

  When follow you an activity using the application of the training session and specify a type of activity, your watch uses the most appropriate sensors and data sources to estimate the outcome of this workout.

  For example, when you save a run in the open air:

  • If you also take your iPhone along (with compatible Bluetooth and location Services), your watch can access the GPS of the iPhone data when estimating the PACE and distance.
  • If you do not take your iPhone along, the watch relies on data from the accelerometer in the estimate of the PACE and distance.
  • Data from the heart rate sensor is used during the estimation of the Active Calories, including calculations which are adapted to different activity types.

  Calibrate your watch helps improve the accuracy of the different estimates made by the activity and workout app app. More information and instructions for calibration of your watch (including to reset all calibration data) are available via the link below.

  Estimates of the results will also depend on your personal information. To verify that this is correct - and update over time:

  • On your iPhone, in the application of the watch, go to: My Watch tab > health > edit - tap and adjust the settings, then press on in fact.

  More information:

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

• How Apple Watch to know or to calculate the intensity of my workouts?

  Hi all

  I used my Apple Watch now since some time in combination with the application of activity for different types of workouts such as running etc and I am curious about the watch or the activity app knows the intensity of a workout as a race.

  The rate watch or app works just like a similar race or does it somehow make a difference if a race is more or less "hard"?

  I am interested in this because I think that there is a difference if you go on a relaxed atmosphere, 10km run, or if you for example one very hard works on a mountain. Can watch it / app don't know if you use for example up the Hill?

  I was recently on a very relaxed ran about 10 km with my girlfriend. After such a race I feel very exhausted, but the activity app still said I burned some calories. Now another day I went to a really hard and fast race up a hill which was a lot however shorter, only about 6km. In this case the activity app said I burned fewer calories than on race relaxed and I really can't believe that run if I work very hard compared to a relaxed atmosphere.

  That's why I wanted to know how it actually works and hope someone can answer me.

  Thank you and best regards,

  Thomas

  Hi Thomas

  When follow you an activity using the application of the training session and specify a type of activity, your watch uses the most appropriate sensors and data sources to estimate the outcome of this workout.

  For example, when you save a run in the open air:

  • If you also take your iPhone along (with compatible Bluetooth and location Services), your watch can access the GPS of the iPhone data when estimating the PACE and distance.
  • If you do not take your iPhone along, the watch relies on data from the accelerometer in the estimate of the PACE and distance.
  • Data from the heart rate sensor is used during the estimation of the Active Calories, including calculations which are adapted to different activity types.

  Calibrate your watch helps improve the accuracy of the different estimates made by the activity and workout app app. More information and instructions for calibration of your watch are available via the link below.

  Estimates of the results will also depend on your personal information. To verify that this is correct - and update over time:

  • On your iPhone, in the application of the watch, go to: My Watch tab > health > edit - tap and adjust the settings, then press on in fact.

  More information:

  Calibrate your Apple Watch for better accuracy of training and activity - Apple Support

  Use the activity on your Apple Watch - Apple Support

  Use of the workout on your Apple Watch - Apple Support

• problem with the network wifi and bluetooth also having installation problems

  using compaq presario cq43 405au with windows7 32 bit currently... has been formatted before using it. Since the wifi does not rotate, no bluetooth, no attempt to install all the drivers of network on the site but to no avail, a part of the installation was the same nt successful. . (e.g. softpaq does not apply to the system not installed no recovery Manager). I can not install hp Wireless Assistant for a reason, I tried to use the Device Manager option where I can install and update drivers... that too does not work... it's either the driver specific I'm looking is to day or work properly (yet give problems; even after reinstallation or activation) or I just downloaded the driver has not been installed successfully and thus never appears in the menu Manager device. Right now I use an adapter external tp link wifi... Its correctly installed and works very well for access the internet... But I need to get the wifi and bluetooth thing.

  Do I have to reinstall the OS? Maybe because it has not been installed properly during formatting? or what?

  Kindly help.

  Thank you.

  Hello:

  According to the list of parts for your laptop, it has an Atheros wireless with bluetooth card or a wireless card broadcom Bluetooth, so those who are the only two drivers without wireless/bluetooth, you should try.

  It would be better if you knew exactly which Wireless adapter you have, so there is no worry about the bad driver causing the problems.

  http://PartSurfer.HP.com/search.aspx?SearchText=A9L96PA

  HP wireless assistant software is not compatible with your model.

  Your model uses the latest Connection Manager HP software that does the same thing, as does the HPWA software on notebooks.

  This package provides the connection manager HP for the notebook models and operating systems.

  File name: sp54630.exe

• Sleeves for 16' Satellite A505

  Anyone know of a good deal that I can buy, which will adapt the A505-6960? It has an external battery on the back which lift up the lap top a little. I'm looking for a sleeve type case, so I can put it in my book bag, but something that does not scratch as well. Thank you for those who have good advice on a specific type and style of the round.

  Greg G.

  Hello!

  On the Toshiba site, you can search for compatible sleeves:
  http://www.CSD.Toshiba.com => find accessories

  With the part number, you can search with Google to find online shops where you can buy it.
  Or contact an ASP and order the sleeve it. Maybe they can offer other sleeves too. Just ask for this and they will help you.

  Good bye

• What does model no dvd player should I buy to fit inside my hp pavilion desktop a6244n?

  HP Pavilion a6224a, Visa Home Premium desktop computer. DVD drive TSSTCorp CDDVDW TS-H653N. (SATA)

  DVD/CD player will not read. System says it all right (this device does not work correctly. I already tried 15 different things. Deleted UPER and lower filters of the directory, HP scan of material, downloaded driver (said I have the current driver).

  I'm ready to replace the disk (I use it a lot, could be just dead) but I can't verify exactly which drive adapts to my PC. It is important while tray lines-up and sliding open correctly etc.

  DorieAZ,

  Regarding the a6244n HP, here's the upgrade and service Manual

  She is Frank swap-out.  Be sure to remove the old drive from the Device Manager.

  HP burner with lightscribe (IMHO caused my previous burner to fail)

  Sony burner w/o lightscribe

  Installation tips: install the drive, but do come back. Install the front cover (front cases). Then slide the drive forward and let the lock brackets to locking up.