Similar Questions

• Mysterious slot machine internal on NB520 - 10 p

  Hello

  I just bought a 10 p NB520 and when I opened it up to the disk and memory upgrade, I noticed that there is an additional location (uninhabited) next to the disk.

  I do not recognize the type of connector although it seems to be of a format similar to that of the module WLAN is connected.

  Does anyone know what's the point?

  I was wondering if it could be for a WWAN (3G) module, or as a future update to the series NB520 etc., or for the later models using the same case. It also seems to be what looks like a slot for SIM card under the battery.

  It doesn't seem to be any info on this Toshiba.

  Thank you, Ian.

  If possible, do a photo and post it here.

  In any case AFAIK some NB520/NB550/NB550D are delivered with the WWAN card. I guess it has to be this mysterious slot machine. It is located close to the HARD drive.

• HP COMPAQ 8200 Elite Micro Tow: Can you tell if this system has slots for SSD or hdd adapter necessary - & gt; SSD?

  Can you tell if this system has slots for SSD or hdd-> ssd adapter need?

  WIN INITIAL 7pro

  i5-4-core - 16GB - RAM - fresh install [new 1 TB HDD] 8.1pro win 10pro Win

  HP COMPAQ 8200 Elite Micro Tower

  P / N:XY139EA #AB7

  PURCHASED 07/03/2012

  For w10pro c: / recommend reinstall to ssd or migrate ssd or even is...?

  SSDS all have sons the same size and holes threaded on the bottom and sides.  They all use the same fine metric threads live short (short, so they don't lower).  These screws must come with the adapter, and I live in general using the lateral holes.  Parts of the adapter have threaded, 3 holes and you will use the back ahead and away from those for channels of the drive Bay.  If you look at each side of a standard 3.5 "HDD, you will see the same same spacing holes.

  Some jobs need the SSD to shift to the left so the orientation of the SSD SATA power and data ports match exactly where they would be if the current drive was a 3.5 "HARD drive clutter.  An example is the drive in a Z620 of drawers which accept 3.5 form factor devices "and slides of drawers in the deep part of the case and automatically mesh with ports of power/data SATA back inside.

  Jobs that fuel just a loose cable and the data cable for the SSD is really doesn't matter much if the SSD is an adapter which keeps it more centered or offset to the left.  I've seen cases where a disk HARD 3.5 "given in the lower Bay and a centered SSD is in the upper drive Bay and there was nearly not enough cable length to reach easily shifted left for drives staggered in the Center.  You can see in the photo below that the Garland of feeding on the HARD drive has two unused SATA power below connectors, and there is not a lot of room between them.

  The card you chose seems good... solid metal.  For the HP 8200 Elite CMT I have access to screws 4 total special 6-32 UNC silver HP threaded screw threaded back ahead and away from the screw holes on both sides of the adapter, and then you use the extraordinary end threads metric short screws mentioned above to fix the SSD to the adapter, as shown in the pictures of Amazon.  These HP silver screw 6-32 no metric I'm talking using Torx or flat screwdriver and their leaders are trained to slip into the channels of the drive Bay.

  There are also other designs which are designed specifically for some HP workstations that include mounts insulation rubber with the sliding mechanism.  I don't think you have that... Here is a picture of eBay one of the 8200 Desktop Elite CMT demonstrating the existence of space on the left for 8 of these silver screw to store, which 4 are missing and used on 3.5 "single drive, you see there.  Don't throw those... they are not something, you can go to Ace hardware and buy.

  

• Slot machine games does not roll correctly

  Help... SLOT MACHINES DON'T ROLL!

  Facebook and outside, I'm playing the slot machine games and they roll properly... or they just roll.  Everything about the game works very well except that... can someone please help I'm so BORED!  Thank you, Cheryl Mc

  Hey cherylmcmillan, my parents love slots on facebook, lol, it's the only reason why we have internet

  I guess this could be a problem with adobe flash player, try unninstalling from Control Panel Add Remove Programs section, and then reinstall Adobe,

  http://get.Adobe.com/flashplayer/

  * Be warned when you perform this download adobe will choose you by downloading the google toolbar, you must uncheck the box on the download screen to withdraw... It's really unethical

  also you can try to reset the internet area of EI to medium-high, if that's the browser you are using,

  Good luck

• Stop a signal to connect to the slot machine

  Hello

  Is it possible to stop broadcasting a SIGNAL?

  I had defined a SIGNAL to connect to a SLOT machine at some point earlier.

  But now I want to stop this SIGNAL to connect to the purpose of the LOCATION.

  I tried this thing

  definition of a signal to connect to the slot machine

  connectResult = connect (sensor, SIGNAL (readingChanged ()), this, SLOT (accelerationReadingChanged ()));

  I use to stop

  Connect (sensor, SIGNAL (readingChanged ()), this, SLOT());

  But he does not have to issue.

  use disconnect to disconnect the signal.
  signals and slots allow n connections n a new connection does not overwrite the old connect.

• Slot machines IGT has encountered a problem and has stopped working

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs
  I have Windows 7 and installed Cleopatra ll, but the game does not start.  Message lights up that slot machines IGT have a problem and that it has stopped working.  Have 3 other games IGT and no problem.

  Hello

  1. don't you make changes on the computer before the show?
  2. is confined to Cleopatra he's question?
  3. did you try to install the game in Windows Vista or in XP compatibility mode?
  4. What is the source of the installation of the game (CD/DVD or a downloaded file)?

  Method 1:
  Try right click on the actual Setup.exe and choosing the option "Run As Administrator" and check if the game starts.

  Method 2:
  Perform a clean boot, and then check if you are able to start the game.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  You can contact the game manufacturer and check if the game's compatibility with Windows 7.

  Visit the Windows 7 Compatibility Center:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=IGT%20Slots%20Cleopatra%20II&OS=32-bit
  If it is not compatible, then you can try to install in compatibility mode and check:
  Make older programs in this version of Windows

  Method 4:

  If the game is compatible with windows 7 so, follow article which also applies to non-Microsoft games:
  Game hangs or quits unexpectedly
  http://support.Microsoft.com/kb/303032
  WARNING OF THIRD PARTY SOFTWARE
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  
  You can contact the software vendor for assistance. Still supported:
  http://support.Encore.com/technicalsupport/

• Application of slot machines!

  Total number of connectors in a Cluster - 108

  Opportunity Machines slot - 339

  Places available - 0

  Failover Slots - 0

  Total host - 18

  Power on VM-339

  With this configuration the VM resumes if one of the host in the cluster goes down. There is no reserves on any virtual machine?

  I think that the virtual machine will restart. But they will take a long time to restart. ?

  What is the best practice don't suggest you. Is it OK to keep the slots 0 or it is better to add a host more, and keep some available failover locations.

  vSphere HA will restart VM regardless of the amount of available locations according to admission control. vSphere HA restarts arrives at the host level, while vCenter controls admission on a cluster level.

  http://www.yellow-bricks.com/2012/03/06/ha-admission-control-does-not-disallow-HA-initiated-restarts/

  In addition, when admission control is enabled your virtual machines have already been accepted to the cluster so when a failure occurs that should guarantee that they will be restarted.

• Auto-trouvez modules SCXI (in the slot machines) with DAQmx

  I have a client with an older SCXI system that I'm upgrading.  While replacing the traditional DAQ options, I would like a routine without configuration code for them (or as close to zero as possible).

  I can find SCXI modules using the properties of the DEVICE, but I can't identify exactly which locations, they are in.  I have aliases are in alphabetical order, it works, but if they do not mess with them.

  Any ideas?  MAX seems to know...

  Hi Jed,

  You attempt to convert a traditional DAQ MAX configuration programmatically in a configuration DAQmx MAX or something else?  The DAQmx API does not expose the ability to query a SXCI module slot number.  I suggest you take a look at the API of the System Configuration OR (http://joule.ni.com/nidu/cds/view/p/id/2613/lang/en).  The 'Material' of the System Configuration API class property node contains a number of Slot property that should return the number of appropriate housing.

• 2011 15 "Macbook pro more low ram slot machine does not work. 3 beeps every time I start up my Mac.

  Hey guys,.

  Then Ive met this weird problem with my mac. While I was using the Mac at work for like 4 hours without interruption and then when it was time to go home, I just put the screen down and put the Mac to sleep. When I opened the Mac at home, he started with 3 beeps and it wouldn't start.

  After having panic for like half an hour, so I decided to take google on this issue. I found many queries, but nothing like mine. So I opened the back panel of the Macbook, deleted the two Rams and re-sitting (like one of the posts on google said to do) twice but it still did not work. I took off the piston down and tried to turn on a single cylinder high and it worked.

  A bit of history, Apple had this quality control program where all 2011 Macbook pros affected by a defective video card can have their logic boards changed for free by taking it to apple. My macbook was one of them and apple genius guys changed the logic board. Long and behold, after six months the lower slot of Bank ram has stopped working. My question is, can I use the Apple since its only six months, and if I order a new Board of the logic on their part, what are the chances that this will not happen?

  Any past experiences you guys could share to help me would be greatly appreciated.

  Aqeel.J

  My question is, do I use with apple since its only been six months

  This is a user to user forum.  We are not employees of Apple.  Some users like you.  You will need to ask your question directly from the horses mouth.

  Call Apple Customer Relations - 1-800-275-2273.  Ask politely and firmly that you want to transfer to customer relationships.  Tell them exactly what you said in your post.  See what they can do for you!

  Good luck!

  If I order a new Board of the logic on their part, What are the chances that this will not happen?

  A good fortuneteller adventure can answer this one!  FWIW, I had mine replaced guarantee also that extended repair program had expired for FREE3 or 4 years ago.  My MBP 2008 is till going strong.

  

• Satellite L635 - no power after cleaning slot machines keyboard and battery

  Hello

  I cleaned my * toshiba satellite L635 * battery and keyboard, and when I replaced the battery and plug in the power cord, PC blinked for a moment and then no longer start: no power.
  I don't out the battery, plugged, no power.

  The circuit is damaged?
  If so, is that the motherboard is also damaged?
  What should I replace?

  Help, please
  Thanks in advance

  Raff

  So it seems
  How to clean the slots in the battery and other parts?
  Have you used some kind of liquid?

  You can also remove one of the RAM modules to check if a Ram module is not affected
  But it seems that the motherboard is affected.

• ? slot machine

  Hello

  There is a slot on the right side of the front of the case on my X200s, just to the right of the lock, which is for? Thank you J

  Thank you very much for this, it looked too big for a SD card but it fits and reads!

• STILL, slot machines IGT Cléopâtre II installs, but does not.

  * - Title original - ENCORE IGT Slots Cleopatra II

  Someone had a problem getting this game to play on their computer?  I can't make it work.  He

  installs but when I go in the game, he will not answer.

  Hello

  1. have you made changes on the computer recently?

  2 is that the problem is specific to this game?

  3. What is the exact error message you get when you try to run the game?

  4. What is the source of the installation of the game (CD/DVD or a downloaded file)?

  5. what version of Windows is installed on the computer (32-bit or 64-bit)? http://support.Microsoft.com/kb/827218

  I would like you to check with the game developer to check whether the game is compatible with Win 7 or not, since we are unable to find the compatibility in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=Encore%20IGT%20Slots%20Cleopatra%20II

   

  Method 1.

  I suggest to install the game on another computer running the Windows 7 operating system and check if the same problem persists.

  Method 2.

  Make older programs run in this version of Windows: http://windows.microsoft.com/en-us/windows7/make-older-programs-run-in-this-version-of-windows

  If the developer of the game says the game is compatible with windows 7, then follow this article which also applies to non-microsoft games:

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Reference article:

  The problems of the game performance

  http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

  Method 3.

  If installing the game in compatibility does not help, you may need to contact the software vendor for assistance. Still supported: http://support.encore.com/technicalsupport/

  I hope this helps.

• Best configuration for new LR install on the machine with SSD & HDD

  Hello

  I have been in photography for years, but never got myself sorted to manage all the pictures I managed to take. So from Lightroom.

  I am a new machine with a fast 256 GB SSD, a 2 TB HARD drive, and a clean installation of LR. I also have a NAS I use for backups, but I won't probably LR actively talk to him because it is only accessible via the wireless network. My collection of photos is already in the order of 500 GB, in order to put all my photos on the SSD won't work.

  With this in mind, what is the best way to configure LR with this Setup to get the best performance out of it? The main purpose of the box will be for photography, so I don't mind too much if it uses most of the SSD.

  Tips are welcome. Thank you!

  Lightroom Catalog and spotted on SSD. photos on the HARD drive

• Error initializing pci express slot machine

  
  

  Hello

  Can you make sure that you first power of the PXI chassis, then wait a few seconds, and then turn on the PC.

  This error can occur if the PXI chassis is not fed first.

  Unable to Boot the BIOS since then using MXI Express
  http://digital.NI.com/public.nsf/allkb/05B7131814A5DDA38625710F006BB098?OpenDocument

  If it doesn't, it would be useful to update the BIOS.

  You can also try it on another PC to make sure that the problem is not related to the PC.

  If none of the troubleshooting steps in the work, I suggest that you call us for more troubleshooting and/or send your material for repair:
  NI.com/Ask
  (phone for france: 01 57 66 24 24)

  Best regards

• Avery Cardoza 100 slot machines and video poker 2000

  When I try to install I get D\DISK1ACP\SETUP. EXE THE OPERATING SYSTEM DENIED ACCESS TO THE SPECIFIED FILE. is it possible to install it or not?

  Hello

  Please contact Microsoft Community.

  First of all, you will have to try to run the game as administrator and check whether the problem is resolved.

  Click Start and then click principally made programs, accessories, right-click on the game and click on run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow

  I recommend you to give permission to the folder, measures to give permission

  i. right click on the program or folder

  II. Select Properties

  III. click on the Security tab

  IV. Select button change (if you are prompted to click on continue, please click continue)

  v. click Add

  VI. Type in everyone, click on check names and click Ok

  VII. under group or user name, select all

  VIII. under permissions for system check allow full control.

  Below link for reference:

  What to know before applying permissions to a file or a folder:

  What to know before applying permissions to a file or folder.url

  File sharing essential:

  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  What are the permissions?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-permissions

  All items also applies to windows 8.

  I hope this helps.