HP 970cse is not printing when network

Similar Questions

• documents of fact pending does not print when printing over the network

  Hello!
  Everyone! I have a problem, my printer don't Tróchez not print when I tried to print a copy using network.
  When I tried to print via USB cable, it works well.
  I don't understand how this problem can be solved.
  Kindly help me.
   
  Printer model: HP LaserJet M1120n MFP

  Hello

  Looks like the printer is not on the network or the ip address may have changed

  Please download and run the doctor for impression scanning HP, it will identify and solve the problem...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-120773-1&cc=us&DLC=en&LC=en&OS=4062&product=3447598&sw_lang=

  or you may need to reconfigure the printer to the network and to reinstall the printer drivers on the computer...

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

• (Officejet 4500 G510g-m) does not print when turned on

  Device does not print when turned on. I then cancel printing, turn off, restart and it prints. All the diagnostic seftware shows green controls with messages like "printer ready" & "no problems found".

  Hi Donatkisson,

   
  1 have you made changes to your computer recently?
  2. you receive an error message when you try to print?
  3. What is the operating system installed on your computer?
   
  I suggest you to follow the steps and check if it helps.
   
  Method 1: Follow the steps in the link and check if that helps.
  Printer in Windows problems
  

  Method 2: You can also follow the steps in the link and check if it helps.

  Unable to print? Print jobs are stuck in the print queue
   
   

• My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  Hi 464544,

  Welcome to the Forums of HP Support! I understand once that your HP Photosmart 6520 starts in mode "sleep" you cannot send a print job, it does not automatically standby upward.

  Please take a look here:

  The printer into standby mode after five minutes of inactivity to help reduce energy consumption. The sleep time can be changed from the control panel. The printer will wake up mode 'sleep' to print when a print job is sent to it.

  However, the auto power off feature must be disabled. Auto Power-Off turns off the printer completely, you must use the power button to turn the printer back on. You can change the setting Auto Power-Off from the control panel. configuration -Source

  Menu Configuration > other Menus > Eco > auto shut-off > off

  I hope this helps.

• Conditional liquid do not print when the conditions are met.

  I build a simple menu in British Colombia and for the purpose of this project, I'm going to be exposing this menu without using Module of menu in British Colombia. I use the following code:

  {% If globals.user.isLoggedIn contains 'true' %}}

  < id = "my-account-link" li > < a href = ' / my account "> < i class ="fa fa-diamond"> < / i > < span class ="-animate "> my account </span > < /a > < /li >

  < id li = "settings-link" > < a href = "/ my account-#settings" > < class i 'fa fa-sliders' = > < / i > < span class = "-animate" > my settings </span > < /a > < /li > ""

  < id = 'link-support' li > < a href = "/ my account/help" > < i class = "fa-fa-question-circle" > < / i > < span class = "-animate" > support </span > < /a > < /li >

  < id li = "logout link" > < a href = "/ LogOutProcess.aspx" > < class i 'fa-fa-sign-out' = > < / i > < span class = "-animate ' > Log Out < / span > < /a > < /li >" "

  {% other %}

  < id li = "connection-link" > < a href = "/ login" > < i class = "fa fa-sign-in" > < / i > < span class = "-animate" > Login / / Sign Up </span > < /a > < /li >

  {% endif %}

  I have used before with other snippets of code and this liquid condition print very well. For some reason, when I test the newspaper, the State still shows the wrong code even when I look through the JSON printed in the console object and the object user loggedin contains the value Boolean 'true '. Sort of at a loss as to why it is not printing when the user connects. Really want to use liquid on it and do not have to revert to the version JS of the hiding items.

  Thanks in advance to all! Best wishes!

  Well, I feel stupid, I was following the copy and the tutorials BC and pasted. Realized that I had to use operators such as "is" appropriate and «!» = ». I fixed it now

• HP photosmart 7520: printer does not print when lite blue flashes

  I just noticed recently that my printer does not print blue wifi lite flashes when the icon of the printer on my computer says printer not connected, but it's all about.  Ive tried unpluging the router, then the printer and restart the computer that gets everything back up and working, but after a while it goes back to blinking and does not print what is wrong.

  Hello

  Asuming the printer is connected wireless, a flashing blue light indicates a lost wifi connection, the pritner is disconnected from your network at the time and so it will not be printed.

  I suggest to place the printer near the router, but not less than 2 metres. too far can cause the connection to become less stable, but also too close distance due to dead radio signal problems.

  Try putting 2-3 meters to test, make sure you there are no metal objects in the path between the pritner and router (which can affect the wireless radio).

  Other that those try after the following steps to solve this kind of problem:

  http://support.HP.com/us-en/product/HP-Photosmart-7520-e-all-in-one-printer/5199461/model/5199462/document/c03381908

  Plwase informed me of a difference

  Shlomi

• HP Officejet Pro 8100 does not print - wired network connection - Mac OS x 10.9

  I have my 8100 Officejet Pro connected to my home network via a wired ethernet connection. I use Mac OS X 10.9. We had ongoing problems with the printer is accessible via the network. Whenever we have set up the connection, it works for a few print jobs, but whenever we close the printer, the next attempt to print always fails.

  I just went through all steps to solve the problem. I went back to square one: reinstalled printer drivers on my MacBook Pro running Mac OS x 10.9; has passed through all stages of wired network connection. and now, every time I send a job to the printer, it fits like the receipt of employment and printing, but the printer itself does not.

  The Billboard on the printer indicates it is connected to the network. Print the Network Setup page confirms it is connected to the cable network. Visit the IP address of the printer via my web browser also confirmed. I am able to print a printer HP Print Utility status report, so I don't know that the computer network and the printer are connected and communicate with each other. However, I can't print from MS Word, PDF files or anywhere else outside of the HP Print utility. Work is revealed in the queue, where it shows the status of each page completely 100%, employment disappears, but does never print it.

  Help, please. This has been a problem since I bought the printer, and now that my warranty has expired, it's my last hope of fixing. I'm at the end of my tether with a device that I spent enough money on to expect to work, and it does not work properly literally since the day where it was purchased. All attempts to implement working temporarily, at best. Thanks in advance and if you need more information, please let me know.

  Hi DBG345

  I understand that you are now able to print from USB, but not on the network.

  There are a few things you can try.

  Connect the printer to the router with the ethernet cable.

  Unplug the USB cable.

  Get the IP address of the printer.

  Click on the Apple.
  Click on System Preferences, click on the print icon and scanning, select the printer, click the sign - to remove the printer. Then click on the + sign, then select the printer from the list, select the printer name first, if it does not try the driver airprint, (airprint is apple pre-installed with functionality of basic pilot) click on the Add button.

  You can try is to add the printer as a Protocol IP to see if it will work. Go to Apple, system, print, and scan preferences, click on + button, then select the icon of intellectual property across the top, type in the IP address of the printer, select direct stream below, then apply.

  Try to print.

  I would like to sign up for updates from the HP driver. When available, you will be informed by e-mail.

  Hope that helps.

• HP Officejet 7310 all-in-One: printer does not print when connect you to the router

  I can't print from a Mac book pro wireless connected to dsl ATT modem/router.  My printer, HP Officejet 7310 is connected to the router with an ethernet cable.  I can print a test page from the laptop and see my supply rate.  When I try to print an e-mail or my word processing, I get my printer icon on the desktop that said it printer, no error message, but printing does nothing.

  I use the latest driver from apple, 2.0.4 and I have installed and uninstalled the printer numerous times and I

  Download the software twice.

  The HP network configuration page shows the same IP address of the printer, as does the router.

  The printer works fine if connected to the laptop.  If I connect the printer to my mac mini, which is also connected to the

  router by an ethernet cable, I can print from the laptop.  What is going on?

  Hi @TimL2,

  Welcome to the HP Forums!

  I noticed that you can not print with your HP Officejet 7310 when connected to your router. I'm happy to help with this problem!

  Please, try the procedure described in this guide, "printer offline" or "printer not responding" Message (OS X)and let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  I hope this guide is useful!

• New HP LaserJet Professional M1212nf MFP is does not print on network

  We have a new HP LaserJet Professional M1212nf MFP. I attributed to a static IP address, and he pulls up on its web interface. I loaded the printer for network printing on our Small Business Server 2003 and installed on several PC. No matter what we do, it will not accept a print job, even the test page. Nothing that he prints. I checked spools of printing, drivers, etc. Nothing seems out of place. Any suggestions?

  I could never operate via the server print but is gone to every computer with the CD and installed via IP right and works fine now.

• all of a sudden not printed when they are asked to

  I checked the connections. Printer produces sounds when I try to print from the computer, but does not print. The elements will continue to accumulate in the queue (which I just discovered how to cancel). Is there a place I should go in my computer?

  I checked the connections. Printer produces sounds when I try to print from the computer, but does not print. The elements will continue to accumulate in the queue (which I just discovered how to cancel). Is there a place I should go in my computer?

  Katherine, this could work, it did for me. But whatever it is, it won't hurt to try.

  First, shut down your computer. Then unplug the wire from the back of your printer that goes to your computer. Wait 20 seconds, reconnect the wire to your printer and then restart your computer. Cross your fingers and try your printer.

  If this doesn't resolve the problem, try to uninstall and then reinstall the printer software.

  If all goes well, one of these remedies will solve your printer problem.

• Why my computor says to put in operation the printer not printing when sound of course.

  vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

  vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
  vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
  vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
  vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
  vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv

  printer used print computor says vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv is not, when it is

  Hi Mark,

  1. What is the exact error message?

  2. What is the brand and model of the printer?

  3A this works much earlier?

  I suggest to run the printer Troubleshooter and check if the problem persists.

   

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also see the following article for more information on printing problems:

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Photos will NOT print when I attribute Elements 9 to manage colors - Hmmm...

  HP Photosmart Premium C310a

  Mac mountain lion

  Photoshop Elements 9

  So, I've been printing with this beautiful printer for a while now.  I love. I have Photoshop Elements 9 (Yes, a while back, but whatever.)

  Today, I found where you can override the color management settings in the elements, so I clicked on this button and had elements to 'manage' the colors.

  Now do not print photos.  I get a blank picture.   Just feeds me an empty picture.

  So, I UNclick that button, to return to what the PRINTER manage the colors once again and VOILA!  I have a picture, without modification, I did.  Which is kind of useless to the program.

  Print photos in ALL other programs, no problem.

  I'm on the forum THIS (HP), it is because with all the research I've done, I have read/seen the same problem happening with others (HP and other model) printers.  The minute they click this button and replace the printer manage the colors do not print photos.  And if they change it back, their photos print again.

  I read for the manufacturer of the printer to let them know so that they can create a "fix" for the drivers, because it is not a problem with the elements.  Really?  How am I supposed to do?  Here?

  I would LIKE for someone else who has elements of try this and let me know if they have the same problem, OR, if someone has OTHER suggestions!

  Tried to reinstall the components.  Remove the printer, the printer reset, etc.  Nada.  A bit of STINK to edit, and then save it and go to another program and print.

  Ideas, suggestions are appreciated!  Thank you!

  Hi Amy,

  Have you tried to download directly from Adobe ICC color profile?

• Air Print wil not print when iPad.

  iPad did print on HP Officejet 6500 Plus one until I hit the reset because of the WiFi button to rest questions. Now, AirPrint acknowledges iPad but does not print the page.

  Shlomil, Bravo for you!                 18/12/2012

  You e-mail me that an iPad "How-to-Fix" will not print on HP Officejet 6500Plus.

  Your instructions worked.   My Print Center has been saved. By he clean the printer worked.

  iPad now AirPrints.

• Captian El OSX with Konica-Minolta bizhub C454e does not print when codes active accountants

  Hello
  I am trying to solve a problem with 2 MacBook Pro running El Capitan trying to print to a Minolta C454e with accounting codes. Currently there are no problems with Windows machines on the network, and when I turn off the functionality of account codes to the printer, the MacBook can print normally. When I turn on the accounting function, the looks of MacBooks as it prints normally, however, nothing goes to the printer. No error code / notification occur in OSX or the printer. Have contacted Konica on the current driver and long story short, told me to call Apple (figures). After you have installed the printer driver, go into the features and layout introduction accounting codes and save the settings in a preset, print the application (for example, Safari). If you would be grateful if someone can point me in the right direction on what could be missed, thank you.

  -Vincent

  

  

  

  Unlike almost all other manufacturers of printer, Konica-Minolta did not an agreement with Apple to get Apple to distribute their printer drivers. The only source for Konica-Minolta for the Mac drivers is Konica-Minolta.

  I checked and Konica-Minolta have drivers for El Capitan. See http://www.konicaminolta.eu/en/business-solutions/products/office/multifunctiona l-printers/color/bizhub-c454e/download...

  We use a called package PaperCut to manage our Konica-Minolta printers and to allow us to assign account codes and generating billing reports. See http://www.papercut.com/products/mf/

• C6100 not printing on network

  All computers on the network can no longer print to my C6100. I have reset the connections and I can see the printer on the network. When I ping the server for the printer page, it shows that it works correctly. Is it possible that a recent windows update is the problem? I was able to scan to a computer in the printer (which is unusual, because the software is buggy) and it worked fine. This is the first time that reset the router, printer and computers does not solve this problem.

  Well... I should get the big "DUH" out there...! Thanks for reporting the issue! What I can't understand, is why the IP address would not be updated if the box in the configuration/port tab to "always print to this device even if its address has changed. The printer does not receive its addresses dynamically from the router?