HP all-in-One: alarming of the boos and screams

Similar Questions

• Officejet 6310 all-in-One fainted during the printing and copying

  I have an Officejet 6310 all-in-one.  I have Windows Vista.  Yesterday, I replaced the black cartridge with HP98.  Now when I make copies or print a document, print the page gets more light and more light, about 1/3 to 1/2 through the page and very light down by a horizontal white line through the text.  I cleaned the cartridge with a damp cloth, I ran the command of cartridges clean but also align the cartridges.  I turned off the printer and unplugged and restarted again.  When I run a self-test page, especially the black line went up to 2/3 of the way, then it is empty at the top and gets darker, then the last 1/3 is fine.  The test pattern shows a few holes in the grid to black.

  I just checked the cushion under the black ink cartridge and it is saturated with ink.  I don't know that is where the problem originated.  I would be very grateful of any advice to solve this problem.

  Thank you.

  Is it a HP cartridge or a charging/reman?  It seems to be a faulty cartridge.  If it is an original HP, then check the warranty of the cartridge as shown here.

  It is unlikely that the ink that you see in the field of the service station is the issue.  The ink that you see is the result of the normal maintenance routine that the printer uses to keep the printheads from clogging.  It is normal that there is ink in this area.

• How can I keep my HP1510 all-in-one to print the test pages as much?

  How can I keep my HP1510 all-in-one to print the test pages as much? My printer is connected to my laptop, and it seems that whenever I disconnect, want the printer print a test page when I reboot. I don't know where the option is to disable this option.

  Pages are likely alignment pages.  When a new cartrdige is installed the printer will print an alignment page which should be placed on the scanner glass and press the button of scan to complete the alignment process.  If the alignment is not complete it will repeat when the printer is powered suite or maybe at the end of print jobs.

  The alignment page will stop printing when the alignment process is complete.  See the page here for more information.

• Pavilion all-in-one 23: Add the second monitor to HP Pavilion CTO all-in-One-23-p110z

  As it is configured, the factory is the "HP Pavilion all-in-one-23-p110z CTO" capable of supporting a second monitor?  I see NO obvious "video inputs" ports.

  Thank you!

  Hi @beckinista,

  Thank you for being an active member of the HP's Support Forums.   I understand that you would like to know if you can connect a second computer monitor 23-p110z all-in-One CTO Pavilion.

  The specifications of the motherboard of your computer show that there not a secondary display port. I have included HP Pavilion 23 - p110z all-in-one CTO Office product specifications and configurable Options and HP and Compaq Desktop PCs - specifications of the motherboard, Boa for your reference.

  I hope the above helps.

• I have a HP officejet J6480 all-in-one printer. The screen is white and yellow light flashing

  I have a HP officejet J6480 all-in-one printer. The screen is blank and there is this little yellow light flashes on the Cancel button.  I can not print or fax anything because the screen is empty. Since the light started to Flash the entire printer has not worked. Can someone please HELP! : womansad:

  Well, if you haven't tried this and then create a coercive power reset:

  Do not activate the wide (although you can), remove the power cord at the back of the printer. Wait at least 30 seconds, then reconnect the power cord to the printer. Turn on the printer. If that clears up the flashing light/white screen, then try printing etc...

  If this is not the case, see if something visible is originally the error state such as paper jam, odd items in the printer, nothing fancy. Also try to plug the printer directly into the wall outlet as opposed to a look/power surge Strip, or even try a Jack in another room if it is not successful.

• Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Original title: Dell Printer 966 all in one

  Do I have to pay to download the driver for my printer Dell 966 all in one I lost the driver CD?

  Sam Soliman
  E-mail address is removed from the privacy *.

  You shouldn't if you get it from Dell.

• Unable to print - Officejet J5780 all-in-One, connected to the laptop USB

  I bought a HP all-in-one Officejet J5780 in 2008 and all this year I started having problems printing. I am a student online so I need to print assignment or documents related to the class of my laptop, or make other personal business which involves an impression. I connect the printer to my laptop with a USB port. I have Windows 7 Edition home premium on my laptop. When I bought the printer, I used it with another laptop with Vista. Last year, I bought a laptop.

  I'm going to open a document, click on print, a box will appear as if sending information to the printer, and then nothing happens. The file is located in the print queue whose status is empty. Sometimes stop the printer and re - start, it would start printing once reconnected. But no more. Sometimes if I start my printer first, let it sit, start my laptop, let it sit a bit, connect the USB cable, let them rest a bit, then try to print it will work. But it is rare now. Sometimes if I am performing a repair online it suddenly started working. But it becomes harder and harder.

  I guess I need to new drivers or something, but I don't know which ones to download from HP. This new laptop does not recognize the printer software disk came with.

  I try to start printing HP and doctor Scan and it detects my printer at the start, but at the next step, it does not, said that it can not be connected. I can print an alignment page or test page.

  Or is it time for a new printer?

  I know that is not the USB port on the laptop, because I used the plug with other types of USB cables and everything works. I was wondering if the printer USB cable is bad or corroded the output on the printer itself. I bought a new USB cable and tried. The printer has been detected, updated drivers, and until now it works fine.

• How one properly installed more than one printer all-in-one (different) on the same pcr?

  Once installed 1 All in one printer, how one installs another printer all-in-one (different model) on the same computer without altering the first installation because all software are the same for each all-in-one printer, with the exception of different drivers linked to each different model all-in-one printer?

  Hello Boothkp,

  From what I can understand in your post, you are looking for a solution install several all in printers on one system, without causing problems during the first installation. This can be easy.

  Lets say you have 2 printer that both use the version 14 of the HP Solution Center software. Then, you install the first complete printer with all the software you want to use. The second installation, you just select the option 'Add printer' or 'Add features', this will add then the second printer in the current center solution without a conflict.

  In case this does not work, then please give more information on the model and the operating system you are working on.

  Kind regards

  Van Baardewijk

• OfficeJet Pro 8500 All in one – disappear from the HP Solution Center guard

  Background:

  I have two HP all-in-one devices, at the office of one while a 8500 A909a and at home and Officejet 7310 all in one.

  My Dell laptop running Windows 7 Professional 32 Bit.

  I had the laptops and printers for several years, the two were connected through connectiosn fine wired via routers with printing/scanning also up and running by the HP Solution Center.

  If I work in the office and he wanted to scan a document I woul open Solution Center and left two printers would come to the top. I could click on the installed 8500 in the office and it worked fine. Even if I was at home I opened Solution Center, click the 7310 and could very well sweep.

  Problem:

  In recent weeks the 8500 keeps disappearing from the HP Solution Center. He still appears in Control Panel and other applictaiosn of windows like Word and I can print again, BUT not is more visible in the solution Center.

  I load the installation of the driver software (recently downloaded from the website of HP, file name OJP8500vA909_Full_14 (1)) and charging/install the 8500. It takes about 20 minutes to make. The 8500 appears then, but with a suffix like Officejet 8500 (7) after him in the solution Center.

  I can scan then very well but the next day when I start and get to the center of the Solution, it has disappeared again. It's infuriating and wastes a lot of time.

  Please tell us what can I do to load the correct software once and for all for allowing me to use two printers without them disappearing from the solution Center.

  Thanks in advance.

  Hi HPhep42,

  Follow the steps below and let me know what happens?

  First step: clear temp directory

  1. Type %temp% term or search programs and files of field
  2. Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  3. Proceed to step 2 below

  Second step: downloaded and extracted to your system:

  1 download the drivers and full software features

  Driver and complete software of HP Officejet Pro features

  2. once the download is complete, double-click the file to extract the software.

  3. when the installation window opens, press the Cancel button to stop the installation

  4. tap folder in the race or search programs and files of field

  5. Locate and open the folder starting with 7z (example: 7zS2356)

  6. right click on the folder and select copy

  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.

  8 open the 7z, that you just copied on your desktop

  9 open the Util folder

  10 open the CCC folder

  11 start the uninstall_L4

  12. once the uninstall is complete, restart the computer

  13. run disk cleanup from the tools Accessories\ system under all programs folder

  14. download and install the latest version of Adobe flash player

  Update Adobe Flash Player

  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan?

• PRI all-in-one HP Deskjet 3520: Deskjet 3520 printer all-in-one copy, but will scan and print computer

  This printer has always worked well... used only occasionally. The cartridges are fine.  Everything prints out fine computer, it scans very well, but does not copy.  Looks like it's copy, but shot out a blank page.

  Welcome to the HP community @273frustrated,.

  I understand that your 3520 Deskjet is no copy making more correctly however, you can print and scan without a problem. I will do my best to help! I might be far away but I suspect that there could be a problem with the printhead and it printing black ink. I say this because when you print from your computer, normally the ink colors mix to create a composite black, and when you print copies, it's only the black ink cartridge that is used.

  I want you to try a power reset and make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on.

  Turn on the printer.
  With the printer, unplug the power cord at the back of the unit.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the unit.
  If the printer does not by itself, press the Power button to turn it on.

  Please also try the procedure described in this guide and get back to me with the results when you're done and I hope that we can reach a resolution!

  Testify of my answer by hitting the thumbs up below and press the button "accept as Solution" if I have you helped a resolution!

  I hope this helps you!

  • Printer prints a blank Page or doesn't print black or color ink for the series of e-all-in-one-HP Deskjet Ink Advantage and Deskjet 3520 printer

• All-in - one C6100 HP turns on and off several times

  All-in - one C6100 HP turns on and turns off repeatedly. Error message, use no power cord to turn off.

  Hi Rainbow 7000

  Thank you for your help. I found a solution to reset the printer memory.

  Unplug the power cable from the printer, press and hold #and 6 all by plugging the power cord.

  If the printer turns off and then turn on the printer, it will take time to complete the process of preparation.

  Kind regards

  AJ10

• I tried many combinations of the different pc in order to transfer files from one pc to the other and only max speed I have is from 4 to 10 Mbps.

  Hello

  I tried many combinations of the different pc in order to transfer files from one pc to the other and only max speed I have is from 4 to 10 Mbps.

  I use the switch/cat6 cables only the router is capable of 100 Mbps.

  Also, I connect the pc directly with cable and still the same speed.

  Win7 will get more than that and how?

  I read the other posts on this topic, but all patches are not applicable to me.

  I used various cables and switches and PCs in order to eliminate the possibility of a defective unit.

  Can you please help?

  Thank you

  Andreas

  Hello Andreas,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  Forum TechNet Windows 7

  TechNet Windows Server Forum

  Hope this information helps.

• Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be

  Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be appreciated.

  Sounds like a question of verification on any market that you have bought PS Touch. Have you tried contacting Google and Apple to see what they say?

• New HP Photosmart 7520 e-all-in-one printer from the box, removed the tape and cartridge access

  

  I have a new HP Photosmart 7520 e-all-in-one printer just out the box. I removed the tape and cartridge access door does not open more than 40 degrees. The figure represents about 80 degrees. I'm afraid to force it. I can't put new cartridges in the printer. Very frustrated trying to get help. It doesn't seem to be a phone number or Web site for direct assistance. HP has really gone down hill. Help!

  Hello

  Mine is about 45 degrees, sufficient space to install the ink cartridges.

  Kind regards.

• HP Envy 2013 all-in-one: where is the wireless button while a HP ENVY

  I can't understand how my wireless is off on the HP Envy all in one. Tried f10, F9, f10... F12 and they change nothing. I don't see any blue or amber light on the keyboard. Any help would be appreciated.

  It ended up working for me:
  
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Thank you!