HP B210

Similar Questions

• Size of printing HP Photosmart Plus e-All-In-One B210 series has sent a

  Hi, sorry in advance if I am dumb.

  How can I make sure the photo by email to my HP Photosmart Plus e-All-In-One B210 series are printed on 10x15cm photo paper?

  In fact, how I want to print any photo is printed on paper 10x15cm.

  Thanks for the research and forecast of some indication of this dilemma, I have

  Hi tabby1471,

  All photos sent by e-mail to print prints on a default size of the format 4 "x 6" photo. "

  There is currently no way to change the size of the paper.

  Thank you

• B210 series printer all in one: new Windows Mobile HP 10 now my HP B210 printer prints blank pages

  My all photosmart printer B210 worked flawlessly with my laptop Gateway using the Vista operating system. Laptop was replaced by a new HP laptop running Windows 10. Message to get the printer to print but the pages come out blank. I just bought all new cartridges, never had a single document to print, all the test arrived in beautiful color pages. Now the ink levels are very low, black was very weak, so a bought a new set of cartridges, very expensive and yet the pages come out blank. The downloaded drivers, I use wireless connections. What's wrong.

  Hi @cja13,

  Thanks for joining the Forums of HP Support for a solution to your printing problem.

  I understand that you use a HP Photosmart Plus e-all-in-one printer with a computer Windows 10 and pages are coming in white. I would like to help with that.

  Try to make a black copy using the control panel of the printer.

  If this page comes out blank, try following the steps described in this support document - color or black ink not print.

  If the copy success I download and run the HP print and Scan Doctor to check the installed software. This tool can diagnose and solve many problems of printing software and printer.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Printer HP Photosmart more B210 loses the wireless connection. with MAC 10.6 and Linksys router.

  From time to time my printer HP PSt + B210 indicates not 'online' in the window of the printer utility and do not print.

  I have spend hours to review what I did in th past and become confused.

  Should I start with the HP utility and make sure that my printer is listed only once in the queue (as is sometimes show 2 forms - for the same printer) OR should I stop MAC PB > router > Modem and then restart in correct, reverse order?

  Given that I need to choose "IP automatically...". ", I used Safari and put the 192.168.1.1 in the address bar and follow these steps, as already suggested.  What would be the clear measures to reconnect my HP printer status online? Thank you very much!!

  We will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• My ipad used to print on my printer HP B210, now, it won't. What's wrong? iPad 1

  My ipad used to print on my printer HP B210, now, it won't.  What's wrong?  (iPad 1)  Everything is connected correctly, am online and print very well to my HP laptop.  The iPad is the printer, but after trying to communicate with her, he says that the printer is offline (i.e. is not)

  Hi, I decided to turn off my printer and unplug the unit.  Also turned off of my iPad.  Waited about 30-60 seconds and plugged into the printer, powered on the iPad.  We have lift-off!  It works now!  Thanks for responding.

• HP Photosmart B210 using iPad or Windows 7 computer laptop not printing black

  My husband uses this machine almost every day. The other day, he got an indicator he was more black ink and after having changed the cartridge (which we all have two made more successfully during the past two years) black will still not print. He cleaned the printhead and unplugged the unit and plugged in. He tried three different, all cartridges HP, with two of them coming from different packages sold in different shops. (He suspects that a package of three cartridges was defective, after two of them did not work).

  All the tips under "buy a new unit on Black Friday?

  Can't get black print on Photosmart B210. Followed the instructions for the cartridge door of washing in VERY hot water and let soak for 5 minutes. I then cleaned cartridges twice and hey presto it worked perfectly. I was ready to ditch the printer. I would add that I am 83 years old but was able to follow the instructions of a useful post.

• Photosmart Plus B210 do not print the Photo - Vista and 7 - USB tray and wireless

  Experts!  Help, please!  HP support by phone could not find a solution.

  I bought a new Photosmart Plus B210 last month.  I am a moderately advanced computer user and have not been able to print a picture of this printer, EXCEPT when printing directly from a card inserted into the machine.

  I installed the printer on two laptops, one running Vista, the other running Windows 7.

  The problem persists if printing wireless or USB.

  The printer works perfectly as this major problem.

  Thanks in advance for your help.  If I can't make this work, I'll have to return this printer and will likely purchase another brand.

  Carrie

  First of all, in vista - please turn off the printer, restart your pc and to clean the print queue and turn on the printer.

  Now, make sure you select the exect for the tray paper size, that the same for the type of paper and size when printing... now see if there is a difference.

  What about win7 - what do you want to see exectly? the option is grayed out? You may see other options to select related to it?

• HP Photosmart Plus B210 series

  Suddenly, my printer has stopped printing in black ink.  The cartridge is full.  It's already happened and I just cleaned everything and it started working again.  This time, I cleaned it again, it printed one page and then arrested again to print.  I cleaned it again and it will not print black ink.  I cleaned the print heads and tried to re-aligned with the printer.  The alignment fails every time.  What has something to do with it not printing black ink?  It doesn't make sense to me that this issue would be part of the problem, but maybe it is.

  All my color cartridges are out of ink.  This has something to do with the problem of it not not printing black ink?  That does make sense to me either.  If this is the problem, then I'll spend money for the color of the ink.  Printers frustrate me beyond words.  They simply stop without apparent reason.

  Would appreciate any help I can get.

  Hello Catstuder,

  Welcome to the Forums of HP Support! I understand your frustration and want to shed some light on why the guard alignment fails and why you do not get all black on your thoughts even if you have a totally black cartridge installed.

  1. in the printer to print control and alignment to pass, it takes all cartridges to be installed in the B210. You can print in black ink only, but the printer will still use the ink contained in the cartridges of color for maintenance tasks. It takes little ink from all cartridges in the service of the print head and avoid any clogging.

  2. with the printers ink system, it only does not use black ink even though you can choose to print in black ink only. Have a look here: use of inkjet printers ink.

  I propose to replace the color cartridges, and I am sure that you will have no problem. If you want to print in black ink only, take a look at the steps below:

  1. in your software application, click print.

  2. Select your printer in the list of available printers.

  3. click on the option opens the printer properties dialog box. According to your application software, this option could be called printer properties, Options, Configure the printer, printer, or Preferences.

  4. click on the features tab, click the Grayscale dropdown menu and then click on black ink only.

  5. click OKand then click print to start printing.

  I hope this has been helpful, if you have more questions please let me know!

  I found this informative information here:a 'ink alert' or "Low on ink" Message appears on the computer or the printer control panel

  Thank you

• Photosmart more B210: Photosmart B210 wants to install cartridges even if she

  Hello

  After a Reset my of Photosmart Plus B210 wants to install cartridges. As I didn't have the original ones, I tried with cartridges of the same type that was a friend of another printer. Unfortunately, even after repeatedly turn on, off and clean the contacts (as described here), the message does not change.

  Any chance to go past this message?

  Thanks in advance

  Philippe

  How do you reset the printer? A simple reset of factory of façade should not do.

• Photosmart B210: Drivers not available

  Tried to download the drivers for my scanner/copier Photosmart B210 today but the site says: "error 404: there is no content available."

  Same result with the method 'detect my product. "

  How can I get my hands on the drivers please?

  Hi Paul,
  
  Thanks for the link but I downloaded it from http://www.siliconguide.com/drivers/device/1792/.
  
  I needed a solution and HP let me down with the drivers not being available from a trusted souce, but thanks for taking the time to reply. Much appreciated.
  
  WitchNet
  

• HP Photosmart B210 more: HP Photosmart Plus B210 will not copy

  My HP B210 won't do a direct copy. I can scan to a file and print it from there, but I can't make a black or a color copy. I tried pressing "copy" and then pressing "settings" to restore the default settings, but that didn't help.

  Any help will be appreciated.

  Hi @onslo

  What happens when you try to perform a direct copy? The scan function uses the same hardware components such as copy, so theoretically speaking, if you can scan, you should be able to copy. Maybe the problem is with the ink system, please try to print a quality report and let me know what happens.

  1. Load plain white paper in the input tray.

• iPad does not print when B210 is in sleep mode

  My iPad is "printer offline" when you print from my iPad to my photosmart wireless B210. Apple Care suggested that I contact HP to find out if Air Print the printer can be left on when prnter goes into stanby mode. Or if the standby printer can be disabled.

  Looks like a problem network here. I would first start by turning off the iPad, printer and unplug the router. Then plug the router back in and when he's back to a normal diet on the other two aircraft. See if you can now access the printer.

  -Spencer

• Cannot install B210

  Hello

  My brother-in-law gave me his old printer which is a HP Photosmart Plus (I only guessed that it was a B210 because this is the option that appeared when you're looking for a printer install!)

  Have tried to add to my computer, I can not.  My computer seems to find that there is a HP Photosmart printer but when I click it, I have to select from a list the brand (so I chose HP) then comes a list of printers.  There are plenty of Photosmart those but B210 isn't on the list!

  Please what could someone help me and tell me where I'm wrong!

  Thanks in advance

  Cdacks

  Hi Cdacks,

  If you have Windows 7 or 8, connect the printer to your computer and use the following tool to get its drivers automatically:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-122330-1&cc=us&DLC=en&LC=en&OS=4158&product=4021935&sw_lang=

  So, you can click on the orange button to identify now in the top right of this page to detect your printer:

  http://support.HP.com/us-en

  If this does not help, open the cartridge door and look for the number or the name of the template, so you can find the model number on the label on the back of your printer.

  In addition, remember to specify what operating system you are using.

  Shlomi

• Series HP Photosmart Plus B210: Connectionproblem iMac - HP

  Since I installed Mac OS X 10.10 (Yosemite) (OS x 10.8 Mountain Lion) my printer does not (always) enable to printing purposes. What should I do to make the printer work properly?

  When I stopped the printer completely for awhile (220 V, several minutes), the printer can begin to work, but not in all cases.

  Thank you

  A.J. van der Hout, Netherlands

  Hey @vanderhout,

  Welcome to the Forums of HP Support!

  I see that you have some problems with printing regularly from your machine Mac OS x 10.10 for the all-in-one Photosmart Plus B210 printer. I can help you with that.

  To start, make sure that the printer is connected directly to a wall outlet and not a surge protector. Once this is done, if the printer is connected to your Mac via a USB cable, remove it. If it is connected wireless network, turn the printer off and remove the power cord at the back of the router for a minute. When the lights come back on the router, turn on the printer.

  Now, let's try printing. If you were able to print quickly then the issue is related to the network. This document explains How to troubleshoot wireless connection with your printer. As a result of this document should help you identify why your connection issues.

  If the printer is still not printing on a regular basis then:

  1. Click on your Apple icon, system preferences and printers and Scanners.
  2. Hold down the CTRL key and click on the picture of the printer on the left side of the screen.
  3. Click on reset printing system.
  4. Open your utility Applications, file and disk utilities.
  5. Click on verify disk permissions. This should take about 10 minutes.
  6. Click on repair disk permissions. This should take about 10 minutes.
  7. Restart your Mac.
  8. If you removed the USB cable, connect. If this is not the case, click on your Apple icon, system preferences and printers and Scanners. In this window, click the icon 'more' in the lower left corner. Now, select your printer in the list. Click in the box next to and select your printer. Finally, click Add.

  At this point, you should be able to print. If this isn't the case, please let me know what happened following my directions and I will be able to help you further.

  Please let me know if this solves your problem or if you have any other questions. If not, have a great weekend!

  If it solves your problem, please help other users find this thread by clicking on accept Solution below my post.

  If you appreciate my help, please inform other users by clicking on the icon below my post thumbs up.

   

• HP photosmart B210 series: Photosmart B210 prints only partial pages then stops (Mac osx)

  Hello

  My printer HP Photosmart B210 more often than otherwise, print documents of the half, then stops mid page and eject half print. For images, word documents, PDF, and 4 x 6 photos, as well as wireless printing, or plugged directly on the USB printer.

  What happened for a few years now, over different versions of mac os x.

  'Help!' he seems to get more frequent... :/

  Greg

  Welcome @greg_a_leg,

  Thanks to their participation in Forums of HP! I see by your post that the complete documents are not printing from different applications. I will definitely do my best to help you.

  Try a self-test printing material in order to exclude a hardware problem: print a Network Configuration Page.

  If you haven't already done so, repair the permissions of the drive on the Mac:

  • Repair disk permissions:

    • Click on your desktop so that it is written next to the Apple Finder icon, and then click Go (you'll see it next to the Finder after file, edit and view).

    • In the context of Go, click Applications.

    • In Applications, select utilities.

    • In the Utilities folder, you will see the disk utility, double-click on this icon to open the disc utilities.

    • Click on your hard drive, and then click first aid. Click Run to allow it to run.

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Let me know how recorded the name of the printer in the Printers & Scanners window.

  How is the printer connected?

  Feel free to click on the button 'Accept as Solution' and the 'Thumbs Up' for my help. Please let me know the results and if there is anything else I can help you. Thank you!