HP C3180 all in one.

Similar Questions

• How to stop feeling ALWAYS of my C3180 all-in-One printer test page?

  Whenever I have replace the black ink cartridge in my C3180 all-in-one printer, it prints a test page. Every time. Always.

  It's boring, but also expensive ink is not cheap.

  I have an iMac with OS X 10.6.8 'Snow Leopard '.

  I have the latest software/drivers of HP printer.

  I also searched all the software, to see if there are preferences and settings that I can change.

  I realize that a test page should be printed after a new cartridgev is installed, and maybe when I need to test it. But not every freakin ' the printer is turned on. The cartridgte in there now is new and the ink is already weak, and what I am printing is barely readable. There's a pile of scrap paper next to the printer, all test sheets!

  I apologize for the attitude, but at more than $20 a pop for the cartridges, it's cost me money that I can hardly afford.

  Thank you!

  Hello

  Whenever you replace an ink cartridge cartridge he must be aligned.

  Lack of any color will make the alignment to fail and so the printer will continue to try to complete alignment.

  Compare the jessy printed with this example, it can happen if you ran out of color ink, etc.:

  

  For troubleshooting most follow this document:

  http://support.HP.com/us-en/document/c01336397

  Shlomi

• C3180 all-in-One: re = install

  EU all-in-one type C3180 for 5 years. Good.Had to uninstall.

  Efforts to re - install keep failing. Message implementation. Please correct RUN As.

  I am only user and administrator, so can not understand the problem. Tells me to remove the disc, close and log on as administrator. I always connect one. All ideas are welcome. Followed instuctions of the forum L4un - install.exe.by Travis C posted 11/04/2012, who are very clear and concise.

  @dotage, welcome to the forums!

  I read your post on how the installation fails when you try to install your Photosmart C3180 on your Windows Vista system. I have a few suggestions in mind to start thinking.

  Before any software/installation troubleshooting, please reset your printer and make sure that the printer will make color copies, black and white with success. This is very important because it tests the material first. The printer must be in good working order before trying to install it on the PC. If there are hardware problems, the installation will fail.

  Reset instructions:
  Press the power button to turn the product on.
  With the product, unplug the power cord from the back of the product.
  Unplug the power cord from the wall outlet.
  Wait at least 15 seconds.
  Plug the power cord into the wall outlet.
  Reconnect the power cord to the back of the product.
  If the product does not light by itself, press the Power button to turn it on.

  If the working copies, allows to go ahead and try these steps from the PC:

  1. Perform a clean boot
     
  2. Restart the PC
  3. Download and run the installation online here: HP Photosmart C3100 C4100 all-in-one full feature software and drivers

  I hope that the installation has gone through without problem after the steps above. If the installation failed, save error messages or codes and let me know all the specific information you see.

  I hope to hear from you, good luck and if you want to send me a "thank you", click on the thumb to the top below!

• HP Photosmart C3180 all-in-One does not scroll on glossy photo paper

  Printer all-in-one HP C 3180 will not take paper glossy photo Copier. I hear the gears rolling, but it doesn't pull in the worksheet. It will take regular paper and Matt paper thick. I use only HP advanced photo copy paper. Are there adjustments for scrolling? Any help would be appreciated.

  I was able to identify the problem and solve it somewhat. Settings of the printers were very good; no paper jam, etc.  It is the rear access door.

  Glossy paper would not scroll until I pushed on the RAD. I just have to hold it down until the paper begins to scroll, so I withdraw my hand. Find out where the problem is I should be able to jimmy-rig it (ahh... Yes, duct tape!) to hold in the FDR. Nevertheless, Cheetah12, I appreciate your suggestions.

  alpha2566

• can I use my C3180 all-in-one with windows 7?

  can I use my C33180 all-in-one with windows &?  and if yes how I have set up?

  Yes you can, you can download drivers from here

  Also, click Start and then right-click on computer and left click on properties to find out if you have 32 or 64 bit Windows 7.

• Reference Dell Vista vs HP C3100/C3180 all-in-one

  Hi, had a message here not long ago but never got all the answers, so I'll try once more.
  I have a new Dell INSPIRON 1525 & a HP C3100/C3180 printer. When I tried to install it, Vista does not recognize the printer. OK, I tried everything; received the HP update disc, not working, downloaded from the site Web of HPs, not good. He moved very well, but then it's gone. Not in the window of the printer, anywhere except to remove or repair the file. Then when I click on HP solutions the screen goes black for a second, then returns all distorted and magnified, looks like resolution everything is off. A box is here who says: "no legacy HP have been detected - HP Solution Center will close now. When I click on the close box screen becomes black new & comes back perfect. Before thinking anything, I know all about the drivers and others. I installed & unintalled several times then I can count. I tried to talk to HP they say that is Vista and I believe them. I tried every way you can to get their hands on the Windows folks & got no response, been put on endless hold, said I could talk to someone in this country who was a true tech, but I have to so finally got a response to a tech by e-mail & she gave me a page and a half of instructions that I could print pay(I won't)... If my printer worked. So I wrote them down, but the first part is not very clear, so I sent back & no response. 3 days ago, I called & had somesone who said that they would write to me better instructions and you guessed it... still waiting. Sorry about this but I tried since February 14. I go to College I need the printer and I'm so aggravated.
  Tell you the first part of the instructions, can help me is it someone at least with this please. It comes to getting Vista to Reconize drivers/printer/spool.  It is said: START WINDOWS EXPLORER & THEN RENAME all FILES & FOLDERS in THE FOLLOWING 2 FILES: C:\windows\system32\spool\printers.
  C:\windows\system32\spool\drivers\w32X86 Ok my problem is that when I open windows such as theres a lot of files. none that say above, or what I know to use this subject and I have fear of just the stuff of renameing beginning. Someone know or recognize what he's talking about? I know I'm supposed to find in REGEDIT. I can do that without worrying, but I can't do any further without doing step 1. I've done this so I'm afraid I'm spoil the laptop & have already noticed a strange behavior. Can someone help me? Printers only around the age of 7 months. Thank you

  Assumed as replied, without other added messages

• My Photosmart C3180 all-in-one will not scan.

  Get Installation error 8, [(8,0,0)], then press the 'OK' button to continue. Complete installation - printer OK, but not scan.

  Have tried all the options within the "error of Installation of the HP" without success. "HP solutions Center - 'guide' gives no action.

  Seems to be all 8 sections OK and going to "finish the screen. Connect the printer and "install device driver" is displayed. Close this at the end of "the device is ready for use. The "software Setup screen appears again and then comes to an end, when the ' screen HP Solutions is started." I tried to scan from there, but still get the error "8,0,0" described above. As I said, the HP Solution Center - Guide (for a solution) either do nothing, Windows Control Panel product "program stopped working." Printer/scanner worked with this Win7 for almost a year, before getting this problem. There was also the C3180 in recent years through Win XP & Win Vista.

  Not sure if the problem is hardware, A) B) Windows, software HP C) or (D) the file downloaded "AIO_CDA_NonNet_Full_Win_ WWW_130_140".

  We'll see. It could be all three issues you have described. However, let's test a few things. First first, let's do a copy on the printer itself, see if she did this and that will prove its functional. Other hardware issues maybe a defective USB cable. Then you can consider replacing that.

  Then for the software, I want uninstall you devices and printers, programs and features, Device Manager. Then in the menu Start menu type "%temp%" and press ENTER. Delete all the files. Some will not delete, and it's good.

  Then download the files on the site.

  Make sure that the USB cable is disconnected through this process.

  When you reinstall message out there and let me know the result.

• mechanism error print cartridge cannot move. C3180 all in one

  It will not be printed.  I got this error

  mechanism error print cartridge cannot move.  Turn the printer off.  Free cradle of cartridge.  I checked the cradle.  He moves very well.  The only way I can get the red light to go on top of the computer is to disconnect the two cords for 30 seconds and reconnect.

  I've uninstalled and reinstalled the software from the disc that came with it.

  In desperation, I tried anything that might help - checked for paper jams, changed two inks, processed on.  Restarted the computer.   A prayed and begged for it to print.  Nothing has worked.  My computer was purchased in 2007.   Maybe it of just old and has mechanical problems.  I don't have the time to go printer hunting this weekend and want to print something today.

  If anyone has any suggestions I would be very happy.

  Thank you.

  Reset the printer - turn off, remove power from the back of the printer (not the wall), wait 5 minutes, plug back in and turn on.

  Indeed, it may be stuck and dead, but it's really the only thing you can do to get it back.

• Install my C3180 all in one

  I moved to a Home Office and am trying to re - install the printer of the object. When I insert the CD and click on install, I get the message that the software cannot be installed using the command "run as" and check with the system administrator. I am everything. How to install this? Thank you.

  Have you tried to download the latest drivers from the HP website? These drivers can be found here.

  Let me know if it helps.

• Photosmart C3180 all-in-one printer

  I'm unable to download installation software and drivers from the Web site. This printer was working fine on my system Windows xp, but I'm unable to download the software on my windows vista computer. It downloads support page itself but not the software for download. Can anyone help?  I'm out of warranty!

  You run as administrator?

• My C3180 all in one printer will not print a full page.

  It prints the header and the bottom of the page, but the rest is empty. It's a new problem, since I used this same printer for years without any problem. Any help you can give me would be welcome.

  Can you try using another browser like Chrome or Firefox?

  When you print your email, open it completely and use the "print" button in Yahoo?  Who can make a big difference when printing of emails.

• HP C3180 all in one will not print

  Hello

  I work in Snow Leopard and you have not had any problems of printing up to yesterday.  I sent several photos to print on plain paper and the quick B & W project.  It was never a problem like this before.

  The files were sent to the printer, but the images and the text later, would not print.  The only thing the queue said was that it was a "mistake."  There is no flashing on the printer for me to decode.  Later, I tried to print a text file and it's the same thing.

  The photos have been in iPhoto and I believe that the text file came to 'Sample'

  Help, please!  It is a great printer and I'm right in the middle of a movement, if this isn't the best time to have this kind of issues.  In addition, I'm not a geek and don't know what to do.

  Thank you very much!!!

  JM

  Once add you the printer, choose the desired in the 'Presets' during your first print job setting.

• Series Photosmart C3180 all-in-one

  Is this compatible with printer with Ubuntu (9.04)?

  Yes. Just make sure you have the latest version of HPLIP (if necessary, update using Synaptic or sudo apt - get), then run HPLIP and follow the steps to get connected.

  More information

• C3180 all in one print diagnostic page won't stop printing!

  Can someone tell me please how to disable the configuration and diagnosis of print page that still print everytime I turn on my printer to print something. IT IS WASTING MY INK

  I will apreciate your input please

  I called HP and they told me they would charge me $40 to help me, when my printer is no longer worth what it is!

  It seems that the printer prints an alignment page everytime yor turn on the printer. This can happen if the alignment process was not completed correctly.

  I recommend that you follow the steps in the link below to complete the alignment process:

  http://support.HP.com/us-en/document/c01336397

  Hope this suggestion could help solve the problem.

• Problem with the HP Photosmart C3180 for Vista printer all-in-one drivers

  Need help to reinstall my printer HP Photosmart C3180 all-in-One printer because I can not install the disk to download

  * original title - my computer went down and I had reinstalled Vista program, but my printer has not been reinstalled and I can't reload the disc to do this. I have a HP Photosmart C3180 all-in-One printer *.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1146331&LC=en&cc=us&DLC=en&submit.y=5&submit.x=4&lang=en&cc=us

  Select your operating system to the above link > and then download the Drivers good > install according to the instructions from HP.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=1146331&LC=en&cc=us&DLC=en&submit.y=8&submit.x=5&lang=en&cc=us

  Installation, configuration, etc. info at the link above.

  For any other questions about your printer, contact HP:

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&product=1146331&lang=en

  See you soon.

  Mick Murphy - Microsoft partner