C3180 all in one print diagnostic page won't stop printing!

Similar Questions

• How to stop feeling ALWAYS of my C3180 all-in-One printer test page?

  Whenever I have replace the black ink cartridge in my C3180 all-in-one printer, it prints a test page. Every time. Always.

  It's boring, but also expensive ink is not cheap.

  I have an iMac with OS X 10.6.8 'Snow Leopard '.

  I have the latest software/drivers of HP printer.

  I also searched all the software, to see if there are preferences and settings that I can change.

  I realize that a test page should be printed after a new cartridgev is installed, and maybe when I need to test it. But not every freakin ' the printer is turned on. The cartridgte in there now is new and the ink is already weak, and what I am printing is barely readable. There's a pile of scrap paper next to the printer, all test sheets!

  I apologize for the attitude, but at more than $20 a pop for the cartridges, it's cost me money that I can hardly afford.

  Thank you!

  Hello

  Whenever you replace an ink cartridge cartridge he must be aligned.

  Lack of any color will make the alignment to fail and so the printer will continue to try to complete alignment.

  Compare the jessy printed with this example, it can happen if you ran out of color ink, etc.:

  

  For troubleshooting most follow this document:

  http://support.HP.com/us-en/document/c01336397

  Shlomi

• My C3180 all in one printer will not print a full page.

  It prints the header and the bottom of the page, but the rest is empty. It's a new problem, since I used this same printer for years without any problem. Any help you can give me would be welcome.

  Can you try using another browser like Chrome or Firefox?

  When you print your email, open it completely and use the "print" button in Yahoo?  Who can make a big difference when printing of emails.

• Photosmart C3180 all-in-one printer

  I'm unable to download installation software and drivers from the Web site. This printer was working fine on my system Windows xp, but I'm unable to download the software on my windows vista computer. It downloads support page itself but not the software for download. Can anyone help?  I'm out of warranty!

  You run as administrator?

• Must restart to establish a wireless connection on all-in-one printer, HP Photosmart C3180

  
  

  • Description of the problem - unable to connect to the printer, unless you restart printer
  • -Printer HP Photosmart C3180 all-in-One Printer model
  • (Including service pack revision) operating system - Mac OS X 10.6.2
  • -Wireless connection method
  • Error - could not connect. Photosmart C6100 series (C8897C) is currently unavailable. Please check is it is on and connected, or try again later.
  • Using the latest version of the drivers for HP 2.3 Apple updates and the latest version of the bundled software HP 4.4.3 utilities.

  I was able to solve the problem by reading the comments of others and came across the solution.

  By turning on the printer press and hold keys # and 3 which resets the printer as a warm reboot. Hold the keys down until the main menu appears on the screen (it took awhile so be patient).

  Return to the Mac and remove and re-add the printer via system preferences > printer and faxes (-/ +). However, there is no need to restart the printer twice until it was added back successfully.

• HP C3180 all in one.

  Hello

  I have an HP C3180 all-in-One Printer/Scanner/Copier and I am trying to copy a legal-size sheet.  Is this possible.   When I bought the printer, I was told that I could, but I can't understand it.

  HELP please.

  Thank you

  Hello

  The dish of this printer supports only up to 8.5 x 11 (letter size). It does support legal size paper. Check the specs below:

  http://support.HP.com/us-en/document/c00649946

  Legal scan/copy is possible only if the printer supports the automatic document feeder and printer C3180 is not.

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth

• HP Officejet 4635 e-all-in-one printer prints multi-page document

  Hello, I have a HP Officejet 4635 e-all-in-one printer and can't print a multiple page document. The printer will print all except the two or three first pages, stopping in the middle of the last page it is printing, and then ejected from the page, usually with the third print top. At this point, I get an error message on my computer screen that says: "cannot print from xxxxdocument. I can go back into the print menu and select the pages that are not print and manually fill the work, but which requires sometimes two or three attempts, that the printer stops again impression after two or three pages.

  My operating system is Windows 8, the printer is connected to my wireless router which is on the same floor, the printer is connected directly to the wall outlet. I met this problem until print 28.0 Firefox, Microsoft Word, and Microsoft Excel. The documents included diagrams, sheets of computing, graphics and text. Oddly enough, I think I'm able to print several pages (of least until 4 on my last attempt) of Microsoft Office Picture Manager.

  I have no page unique impression of difficulties from the browser or any installed program and am able to print from my devices android as well, although I still have to try multiple pages printing app. The problem seems to occur more often if I try to print more than two pages.

  I searched on the Web site, looked through the installation of printer troubleshooting, including the instructions under "step 3: If your printer is connected to your wireless router, but you can't print (or scan). Nothing I've tried has helped him.

  I wish I had a solution to this problem.

  Thank you very much.

  Helen Marie Kennedy

  Have you tried full install driver software?  OJ4630_188.exe

  Exit the: 08-04-2014

• CM1415fn: all-in-one printer HP CM1415fn clining after each numbered page process

  I have all-in-one printer CM1415fn. After each page same printer starts cleaning process, then the even pages printed again. For example, I print or copy 4 pages. First are the pages 1 and 2, and then the process begins, then clean again page 2, then pages 3 and 4, then againg cleaning process and once again the page 4.

  What is the solution of this problem?

  (we tried the firmware update, but it's the same result)

  The cause was in contact with the sensor of pollution with foreign body (a piece of packing material). After removing the periodic cleaning of the object has stopped.

• HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. -Fax Confirmation Page

  I have the HP Officejet Pro 8500 has more e-All-in-One Printer - A910g. It works very well, but how to make a page of confirmation by fax, with the impression of a miniature of the 1st page of the document I sent?  I checked the configuration information, but apparently not have indications confirm that I sent the fax through the confirmation page with a small impression.

  Hi dtaylor569,

  Follow the instructions below.

  To activate the fax confirmation
  1. press the arrow to the right and select Setup.
  2. press on the configuration of the fax, click Fax reports.
  3. press on the Confirmation Fax.
  4. tap to select one of the following options.

  • Discount - does not print a fax confirmation report when you send and receive faxes successfully. It is the default setting.
  • (Fax Send): Prints a report of fax confirmation for each fax you send.
  • On (fax) - prints a report fax confirmation for each fax that you receive.
  • On (Send and Receive) - prints a report fax confirmation for each fax that you send and receive.

  Prints a report of fax confirmation for each fax that you send and receive.
  To include an image of the fax on the report
  1. press Setup.
  2. press on the fax, click Fax of Confirmation reports.
  3. tap on (fax) or we (send and receive).
  4. press on the Fax Confirmation with the image.

• ENVY 5530 e-all-in-One Series: My ENVY 5530 e-all-in-one prints only two pages of a multi-page document.

  My newly installed (Jan 2015) ENVY 5530 e-all-in-one prints only two pages of a document with several pages of my HP desk top 500-123ea, windows 8.1. Message on PC "Unable to print document", it's even on Double or single sided printing.  A ran Scan doctor, OK; reloaded software and Firmware from the Hp site. He spent hours and hours of reading the elements of list of support HP; Impossible to talk online with HP. very in angry and frustrated. This HP product seems not as "fit for purpose". I will give HP Feedback after this announcement and rate accordingly. I beleve others have similar experience of this problem. HP is aware?  Is anyone out there that can help?

  We gladly invite you.

  A Roll-up update is already available since December, although it seems that the description is not being updated accordingly.

  Follow the section "get the hotfix rollup for Windows 8.1"in my previous link, which can be obtained by installing the package or by using Windows Update, this is the update that the articale refers... ".

  Shlomi

• HP C5380 all-in-one printer: a thick black/gray line down the page when scanning.

  1 HP Photosmart C5380 all-in-One Printer

  2. Windows 7 64 bit

  3. no error is, as usual but preview and print with a dark gray line / think through the page.

  4. I got a new monitor.

  How can I fix?  the optical reading area is clean, no dust or dirt present and it just started this without reason. The connections are good, I unplugged and plugged the cables of the computer and the printer and the problem is still there.

  When I scan the document line is present and even when I print the line appears on the printed page is not my screen.

  

  bbjae, it looks like there may be a residual electric charge accumulated in the unit.  When was the last time you did a Hard Reset on this unit?

  Hard Reset:

  * Unplug the unit while the printer is on

  Disconnect the other end of the power cord from the wall jack directly

  * Wait 30 seconds

  * Plug power back in and make sure that the device is running

  So, it is a document with the steps to help fix the vertical lines and scratches in the copies or scans, click on the link below:

  http://support.HP.com/us-en/document/c01887471

• HP Officejet 5610xi All in Pri: blank page fate when I try to make a copy on my HP 5610xi All In One Printer

  Recently, I get a blank Page when I try to copy anything on my HP Officejet 5610xi All in One Printer.

  Hello

  I understand that you get a blank page while trying to copy.

  Make sure that the printer is connected directly to a wall outlet, not a surge protector.  If this fails to resolve the problem, please follow the steps from the link below.

  Problem copying

  Give Kudos to say 'thank you' by clicking on the "icon shots."

  Click on 'accept as Solution' if it has solved your problem, while others may find it.

  Although I am an employee of HP, I speak for myself and not for HP.

• Pages come out White HP Officejet 6500 has e-all-in-one printer.

  I have a HP Officejet 6500 a e-all-in-one printer (product # CN555A), and I had problems printing for a while.   I'm working on Windows 8, although the same problem occurs with a Windows 7 laptop that I use sometimes.
  Printer goes through all the movement of printing and pages come out sometimes very thirsty or Virgin (illegible). At the beginning, once in a while it would happen, and once the printer is rested for a few days, it works again. Now it happens all the time and I can't print.  I did ALL the steps of troubleshooting hp and nothing works.   A few days ago, I managed to have it print a little darker, but it mainly printed in gray-greenish, but after the second page, he just disappeared again to nothing.  I think it may be something on the channels contained in the cartridges of ink to the page or something like that.  Can someone help me understand this and the difficulty of my printer?

  Thank you
  )

  Considering that the yellow is almost full and is printing very well, there is actually a small chance that the low level of ink you see (approx. 25%) this is dried up in the cartridge itself.  Think of the ink as a former condiment that has been in your refrigerator for a long time.  When there are more things in the container, it is less likely to dry up, but when you have only a little inside, the air-to-ink ratio increases the chances of this being actually what caused this.

  Although it is cheaper to do the printhead of soaking, it's also much more risky than buying the new ink first.  I highly recommend making sure that you have replaced the low ink cartridges before trying the latest possible stage.

  Certainly, it is probably due to cleanups of printhead, print tests and other basic troubleshooting steps that caused you to be low on ink in the first place.  Maybe double check on the return policy of the store about the ink you buy maybe not a bad idea, either in case you do not buy, does not print, you are soaking the print head and then it also fails.

  Better to be prepared for the worst but hoped that the simplest solution is the best one (Occam's razor) is what I mean by all this.  Keep me posted on what you decide to do.  * fingers crossed *.

• HP Deskjet Ink Advantage 1515: stop the test page printed for all-in-one printer, HP Deskjet Ink Advantage 1515

  How can I stop my HP Deskjet Ink Advantage 1515 all-in-One printer to print a test page everytime I STARTED printing?

  Hello JoshSimon ,

  Welcome to the HP Forums.

  I see that you have a problem with the printer printing before you print a test page.

  If you turn off the printer at the end of the day, please do not.  Turn the printer on/off will result in printing a test page.  If you are concerned about the printer lost power, and that's why you stop, the unit actually built in sleep/stand mode that will kick in when you are not using the printer.

  Once a print job is sent to the printer it then wake up and do the task at hand.

  In addition, make sure you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  See you soon,.