HP C4480 printer suddenly refuses to work "incompatible cartridge" despite works well with the same cartridges

Similar Questions

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• Print screen doesn't work not with the alt key when I want to make a unique active window screenshot

  I have a pc with 4 monitors. The PC connects to citrix 4 virtual machines, 3 of which are works well and 1 which will allow me only to screen all screens, it's like the alt key does not work on this. Changed the keyboard to 1 that I know works fine, still the same problem persists. Could be a registry key that the virtual machine is missing?

  Hello

  Sorry for the delay in response.

  I suggest you post your query in the following TechNet forums to improve assistance in this regard.

  https://social.technet.Microsoft.com/forums/Windows/en/home?category=w7itpro

  Thank you.

• Feather of apple works well with the iPad air2

  I would use a pen to take notes and ratings on Adobe reader etc. will be (or is) the pen of Apple works well with iPad air2?

  # Apple pencil is only compatible with the iPad Pro.

• New type of font "Century Gothic" and works well with the 'live view', but also a google chrome. As soon as I download my index.html file my changes disappear and always see them in dreamweaver, but not on my real Web site. any help will be great. Thank y

  I downloaded my new "Century Gothic" font type and works well with live view, but also a google chrome. As soon as I download my index.html file my changes disappear and always see them in dreamweaver, but not on my real Web site. any help will be great. Thank you!

  I use and Filezilla to connect to our FTP site.

  I see on line 42 of style.css

  do-family: 'Courier New', Courier, monospace;

  I see on line 180

  do-family: "Helvetica Neue", Helvetica, Arial, sans-serif;

  and I see FontAwesome used in several places.

  I can only conclude that Courier New is the applied font.

  If you have a different version of style.css on your local system?

• Adobe Premiere Pro and After Effects works well with the merger?

  Hey everybody,

  I'm in the middle of a semester at the University and I use Adobe Premiere Pro and Adobe After Effects (Windows version). I was wondering if the merger would work well with these programs? I intend to the latest update of merger next week.

  The mac I use is an iMac in August 2008 (running 10.5.6). 3.06 Ghz, 4 GB RAM, 1 TB HD, and a Nvidia GeForce 8800. I also install Windows XP Pro edition and the value of using two processors and 2-3 GB of RAM.

  I will also put it on a new account make sure that practically nothing is running while im current merger.

  I use this for my final college.

  Edit: I forgot to mention. I use CS3. My school has not yet updated in CS4.

  In addition, you think that a 64-bit version of Vista will work best and then 32 bit XP on this partition?

  I love Fusion as much as anyone here and use it a lot. But, in saying that...

  You use this something really important - your final college. You need to perform at its best performance with as few problems as possible because you don't have a lot of time in your semester left (in the grand scheme of things).

  My advice - do not experiment. Work around the merger (as heretical as it may seem on this forum) and first and AfterEffects in a punt in native mode Windows XP OS that is on a BootCamp partition. Video editing will focus on i/o and graphics of your system performance - and nothing works better for this than the native access to the system.

  Running two processors in a virtual merger with computer on a machine with 2 hearts can lead to better performance and is not recommended.

• OSB file work twice with the same file

  I have a problem of execution of a proxy service that get the files from a file system. Everything in the flow works as expected, but at some point, I have to wait for an update on a database and the process awaits for this change. Everthing is normal if the update comes in the following minutes 1 - 7, but after that, if the process is always there in general (9-11 minutes), a second process is called and the processed file is the same. After the first process is called the folder is empty, so I don't understand why the proxy is called again with the same file, since there is nothing on the record. This can happen because I have make changes to the database.
  
  The process is called only twice with the same file, no process is still called (a third) If two processes still work, which is weird. given that nothing in my logical proxy back to the beginning.
  
  "Weblogic/OSB" tends to release resources on a specific time, such as 'Max Stuck Thread Time' but for files or other resources?
  
  No idea why this is happening
  
  Thanks in advance.

  I think it is due to the delay of transaction. The PolledMessageListenerMDBEJB under file carrier has a timeout of the transaction of 10 minutes. So if you encounter a very long-lived transactions that spans more than 10 minutes, you could see the price drop that passes due to the delay.

  To confirm, is this is the case, when this problem occurs, go to JMS Modules > jmsResources > wlsb.internal.transport.task.queue.file_auto_n > Monitoring. You should see messages in the messages waiting in the column.

  Click to view the Messages. Click on a message and check the number of delivery. This should have a value of 1 or more which should mean the message has been restored at least once before.

  If this is the case, you can try changing the value of timeout PolledMessageListenerMDBEJB transaction under file Transport provider in deployments and then update the deployment of file transport provider. Check in parallel with support on what is the official recommendation to increase the time-out period.

• Improved connected IPad Windows10 private WiFi network w/AirPrint printer. Bluetooth is disabled. Try to print an e-mail, the IPad can't see printer. Android phone works wirelessly with the printer.

  IPad on the same wireless network private Wi ' Fi as computer windows 10, Android phone and Samsung printer airprint. Blue tooth is disabled. Can I wireless print with Android mobile phone, but not with the IPad... suggestions.

  Have you tried to reboot your router? Unplug it, count to 10, plug back in and let it boot and see if she sees the printer now. You might also want to disconnect/reconnect your printer, leave everything to make a new connection.

  You can also force your iPad to restart. Hold down the button sleep and home for about 20 seconds. When you see the silver Apple, let go and let it restart.

• Your linux desktop that works well with the fuser unit - is - it?

  I don't know anyone who runs linux on Fusion guest is aware that everything in 3D acceleration works (at least in Ubuntu) window of vmware Fusion to unity mode works not by 3D. And that since all popular linux distributions moves to 3D desktop computers we are practically forced to stop or mode full screen.

  My question is: someone found a good 2D for linux desktop computer that works with the fuser mode, and is also an up-to-date distribution?

  There are a few suggestions on an old net http://communities.VMware.com/message/2139647#2139647 to use With Mate Mint, but who had serious problems for me.

  I'm looking for basically two things.

  First of all the possibility to use the window of the unit mode.

  Second, the possibility of placing several editable launch icons in a home/toolbar etc station in Linux comments so I can open two different documents side by side, very quickly (which was another failure of Mate).

  Specifically, I'm eager to open two sets of accounts in Gnucash. This worked wonderfully in Ubuntu 10.04, and while it is tempting to return 10.04 reached EOL in April 2013 - he is also packing a old version of Gnucash that I'm used to using.

  (btw a different alternative, using the OSX of Gnucash package: works, but the heartbreaking text is horrible, that is why the desire to run in a Linux VM.) MacPorts/Fink is also out because it takes so long to compile whenever there is an update. Want a binary).

  Any suggestions?

  Confirmed to work with xubuntu 14.04.  Note, you need to install vmware tools and restart the virtual machine for this to work.

• I have Adobe Acrobat 9 Pro on my desktop.  Can I load on my laptop to work remotely with the same serial number?

  I use Adobe Pro on my desktop all day at the office and must now manage the work remotely from your laptop as well.  Adobe Pro is essential for my work (Ben stamping, writing, advanced editing, etc.). Can I use the same serial number and installation disc for this load on my laptop?  There is no instructions that deal with this issue, and I know of other programs that I have installed Access desktop or portable.  It's not like I'm giving the use of this product to another user or hacking, so I don't anticipate a problem. Any information is appreciated.  Thank you!

  Hi Rebecca,.

  Adobe end user license agreement permits you to install a license for the retail sale of Monkey on 2 computers to any instance.

  For example, you can load Acrobat 9 license on the other computer too.

  Kind regards

  Rave

• JavaScript works well with the date picker

  I tried onchange and onblur javascript events in the field of the HTML Form element...
  they work great with text fields... but not with the date picker...
  It seems after that date is selected, javascript is triggered, but set to get pulls the value of the field before the date chosen in the selector is placed here...
  
  is it possible to get the event fires with the value of dates...

  Hello

  Check your sample now.
  I have put your function setStatus page JavaScript and Execute when the Page loads

   $('#P1_DATE_FINISH').datepicker("option",{
    onClose:function(t,i){setStatus()}
   });
  
   $('#P1_DATE_START').datepicker("option",{
    onClose:function(t,i){setStatus()}
   });
  

  You can also replace this with

  $.datepicker.setDefaults({onClose:function(t,i){setStatus()}})
  

  Kind regards
  Jari

  Published by: jarola December 14, 2010 16:28

  You probably like to have event onchange in the text field, so I change to

  $('#P1_DATE_START,#P1_DATE_FINISH').datepicker("option",{
   onClose:function(t,i){setStatus()}
  }).change(function(){setStatus()});
  

• Thunderbird has suddenly started asking my password, but does not accept it. (Web mail works fine with the same password)

  Thunderbird from ask for my password. I know the password, just asked for years.
  After typing in password get message

  ' Sending of password did not succeed. "Mail server mail.intergate.com replied: dmanns logon failed."

  However, I went to Webmail.intergate.com; has been redirected to http://email.1dial.com/webmail/Login.aspx.
  Can get very good webmail e-mail (same password), but not by Thunderbird.
  Have already run two anti-virus scans. Have been removed and passwords registered and readmitted them that the program has asked for them and renamed key.db & signons.sqlite (read this in a forum on the web) and they rebuilt themselves. Still can't get email through Thunderbird.

  Have you contacted your email provider? They have server problems.

• Impossible to get my work song go full screen. Worked well at the same time, and I click Ctrl

  I have windows 10 on a Lenovo laptop. I downloaded the images from the internet and using them as work for each song in iTunes. The use of ability "full screen" to work properly, but now it is (in gray), and I can't get the photos in full screen to come. The small images at the top still are appearing, but I no longer use (CTRL + left CK) to enlarge. Help, please.

  CTRL + click piece works here.

  Because you're running Vista what version of iTunes, you're running? You should be on 12.1.3.6.

  TT2

• Tabs above the address bar doesn't work well with the QuickLaunch Dock - do I have to return to FF3.6 for tabs on top?

  Although there are other minor problems with FF4.0, I guess a lot of people are going to get worked in the future updates (I'm confident Mozilla will be as great as they were in the past with these problems).

  The main problem I have (I don't think that will look) is to have the tabs at the top of the window. I have a quick launch Dock that is displayed when the cursor is at the top of the screen for ~1.5 seconds more, and if I hesitate on a tab, it appears and I have to click here to dismiss my QuickLaunch Dock.

  Under the address bar tabs were not distracting - the address bar is much more annoying. At least the legs have a description text of the page, rather than a drawn URL...

  I don't want to go back to FF3.6, as other changes of FF4 - doesn't bother me, but if the tabs should stay at the top, I'll have to switch to Chrome or Safari.

  Right-click on a toolbar, and then click the entry "Tabs" at the top to deselect the it.

• HP 6500 scan high resolution works well with the solution Center HP; but is solid black w/imgage software for editing

  I got an OfficeJet 6500.

  If I try to scan a picture at a very high resolution, using an image of image editing software will come out black.

  I can scan the image using the HP solutions, at the same high resolution Center, and the image will scan very well.

  I think there is a setting for the Windows operating system that needs to be adjusted. I know because I had this same problem once before.

  I found the solution to my problem. but my computer crashed and I had to reinstall the full Windows operating system. I lost the changes I had made. It was in January 2011.

  I don't remember when I had the answer to my problem but I thought that I asked the question in the HP forum (it would have been some time in late 2010) and then someone answered with the solution to my problem. But I can't find the post I did then.

  -My operating system is Windows 7, with a 64-bit operating system.

  -The processor is an Intel Celeron 2 .50GHz.

  I would appreciate any help someone can offer.

  Hello JimTrail

  After watching this on the web, it seems that you is maybe to something. From what I found, GIMP uses a lot of resources, especially true for larger images. He isn't able to handle the scanning of an image as large as 4800dpi without additional RAM or virtual memory to compensate for the RAM.

  My suggestion would be to increase the size to the recommended or higher. Out of curiosity how much physical RAM have you? Microsoft recommends that virtual memory for no more than 3 times the amount of RAM installed. See article: change the size of virtual memory.

  You can also see the article below on the Tile Cache GIMP.org.

  How to set your Tile Cache