HP compaq 6830 s

Similar Questions

• HP Compaq 6830 s battery

  I use Windows XP SP2 on my HP Compaq s 6830 and it will not charge the battery when I use it on the current. The icon in the taskbar says "On AC Power" and the battery life is 20% and this is no increase or decrease. Even when I disconnect the laptop and keep on the AC adapter it does not load.

  Sometimes I take the battery out, then again and it might start to load it but other times it won't.

  Seems odd.

  Also one last thing. When the laptop is turned off and turn off AC, there is a yellow light flashes all the time where the AC wire goes in. What is c?

  Thanks for all the help.

  There is another possibility except the battery.

  Go to your support page and update to the latest version of the BIOS.

• Compaq s 6830: change the CMOS battery in a compaq 6830 s

  I get up a message at startup my CMOS battery charge level is low, so I want to change it.  The computer works well except that.   I have no idea where on the map, it is or how to access it.  8.1 Windows installed without any problems.

  Hello

  We also call it as RTC battery and in your machine, it is very simple, as shown on page 66 of the manual. You can buy anywhere or buy HP using the part number: 449137-001

  The following manual shows you how to replace (from page 66):

  http://h10032.www1.HP.com/CTG/manual/c01550099.PDF

  Kind regards.

• Cannot get online after installing windows XP Edition family on my laptop which was origally XP PRO

  I have a laptop HP Compaq 6830 s that had xp professional did not get a disc of bone with it when buying. The system crashed 0x0000007B error code. I installed OS XP Home version Pro Version and now I't does not recognize my modem or ethernet. Cannot get online. I'll tho the HP site and they don't have that driver for XP Pro Downloads Home Version. I go to the Device Manager and have question marks on the following - ethernet controller (PCI bus 134, device 0, function 0), network controller (bus PCI 3, device 0, function 0), PCI Device (device function 27 of the PCI bus 0 0), Universal serial bus (PCI bus 0, device 29, function 7) (USB) Universal Serial Bus controller (bus PCI 0) (, 26, function 7 device), unknown device (on PCI bus) properties, the properties of the unknown device (on system compatible ACPI Microsoft) and the properties of video controller (VGA Compatible) (bus PCI 1, device 0, function 0) all the points mark have (Code 28). Is there any wat I can fix this or should I install OS XP PRO?

  Go here--> http://www8.hp.com/us/en/support-drivers.html

  Enter the model of your computer.  If you just enter 'Compaq 6830 s' you get 3 choices.

  For example, I clicked on the link below and select the link for "XP Professional" coming to this page--> http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3688717&prodTypeId=321957&prodSeriesId=3688712&swLang=13&taskId=135&swEnvOID=1093

  You're right; There are a large number of items on this page.  You may be able to refine things if you enter your full product number, but if not, here are some general indications:

  "" For each of the downloads, click each tab on the download page and read the information on 'Description' improvements,' 'Instructions of Installation","System requirements"," Release Notes, "and"Revision history" before you install the downloaded driver.

  • Start by "Driver - Chipset" and use "9.1.0.1007 a (January 16, 2009).»
  • Then go to "driver - storage.»  Install the Intel Matrix Storage Manager driver.  Optional, but probably very desirable, install the new version of HP 3D DriveGuard.  You probably don't need (at least for now), the driver of chip card reader (unless you have an external drive of smart card).
  • Then go to "- Audio driver." Install the driver Microsoft UAA and the most recent drivers SoundMax ADI.
  • Then go to 'Pilot - graphics.' Install the new ATI video driver.
  • Then go to "driver - network."  It's a little more complicated.  Install the Marvel Yukon Gigabit Ethernet controller driver.  This will allow you to connect to your cable or DSL or your router by Ethernet cable.  You must determine if your particular laptop has an Intel or Broadcom wireless adapter.  Looking in the Device Manager in the "Network adapter" section, you should be able to make this identification.  Install the driver for the appropriate device.  If you believe that your laptop is Bluetooth compatible, install this driver as well.  The HP "wireless Wizard" is optional.  I would delay installing this at this stage.
  • Then go to "Driver - keyboard, mouse and input devices."  Install the Synaptics Touchpad driver and one for the HP Quick Launch buttons.

  At this point, most of your hardware should work correctly.  If there is always warning icons in Device Manager, you should be able to understand... or ask again here.  Read the 'Description' for other downloads to see if this is something you want or need.  Be aware, however, that many "Software" downloads are only updates or patches and not the complete package (which probably would have been preinstalled on a new computer.

• blue screen with windows vista

  Hello! yesterday a blue screen appeared on my compaq 6830 s with windows vista. I used view bluescreen

  Here's what I read:

  Mini063015 - 01.dmp 30/06/2015 1.33.33 0x0000000b 0x000000c5 DRIVER_CORRUPTED_EXPOOL 0x00000002 0 x 00000001 0x822f5010 ecache.sys ecache.sys + 17c48 special memory device Cache Microsoft® Windows® operating system Microsoft Corporation 6.0.6002.18005 (lh_sp2rtm.090410 - 1830) 32-bit ntkrnlpa.exe + 4dfd9 ntkrnlpa.exe + ee010 ecache.sys + b142 ntkrnlpa.exe + a71fb C:\windows\Minidump\Mini063015-01.dmp 2 15 6002 133.792

  CLASSPNP. CLASSPNP SYS. SYS + fcbc5a48 0x83a27000 0x83a48000 0 x 00021000 0x49e01ee9 2009-11-04 6.39.05 class System Dll Microsoft® Windows® operating system SCSI 6.0.6002.18005 (lh_sp2rtm.090410 - 1830) Microsoft Corporation C:\windows\system32\drivers\CLASSPNP. SYS
  Ecache.sys ecache .sys + 17c48 0x8bba2000 0x8bbc9000 0 x 00027000 0x49e01f2c 2009-11-04 6.40.12 Microsoft® Windows® operating system special device Cache Memory 6.0.6002.18005 (lh_sp2rtm.090410 - 1830) Microsoft Corporation C:\windows\system32\drivers\ecache.sys
  iastor.sys iastor.sys + fcb9cb1c 0x83a50000 0x83b2a000 0x000da000 0x4bba0dee 04/05/2010 18.21.02 Intel Matrix Storage Manager driver Intel Matrix Storage Manager driver - ia32 8.9.8.1005 Intel Corporation C:\windows\system32\drivers\iastor.sys
  MUP.sys mup.sys + d023 0x8bb93000 0x8bba2000 0x0000f000 0x49e01914 driver Microsoft® Windows® operating system Multiple UNC Provider 2009-11-04 6.14.12 6.0.6002.18005 (lh_sp2rtm.090410 - 1830) Microsoft Corporation C:\windows\system32\drivers\mup.sys
  Ntkrnlpa.exe ntkrnlpa.exe + ee010 0 x 82207000 0x825c0000 0x003b9000 0x4b7d1e08 18/02/2010 13.01.28 Microsoft® Windows® NT Kernel operating system & 6.0.6002.18209 (vistasp2_gdr.100218 - 0019) Microsoft Corporation C:\windows\system32\ntkrnlpa.exe

  How can I solve the problem? Thank you

  Wow, you've been crashing for a long time.

  1: kd > .bugcheck
  Error checking code 000000C 5
  Arguments 0000000b 00000002 00000001 822f5010

  1: kd > knL
  # ChildEBP RetAddr
  805ec89c 00 822f5010 nt! KiTrap0E + 0x2e1
  01 805ec958 8bbad142 nt! ExAllocatePoolWithTag + 0x4ca
  02 805eca0c 822ae1fb ecache! EcCacheBootPopulateCompletion + 0x1d2
  03 805eca40 83a2cd5f nt! IopfCompleteRequest + 0x11d
  04 805eca48 83a2c3ee CLASSPNP! ClassCompleteRequest + 0x11
  05 805eca74 822ae1fb CLASSPNP! TransferPktComplete + 0x2b6
  06 805ecaac 83a94fc9 nt! IopfCompleteRequest + 0x11d
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  07 805ecb1c 83 has 55285 iastor + 0x44fc9
  08 805ecbbc 83a562f9 iastor + 0 x 5285
  09 805eccd8 83a9508f iastor + 0x62f9
  0a 805ecce8 822b16c2 iastor + 0x4508f
  0b 805ecd50 822af89d nt! KiRetireDpcList + 0 x 147
  0c 805ecd54 00000000 nt! KiIdleLoop + 0 x 49

  The storage technology Intel Raid driver corrupted pool system, which caused an attempt to access invalid memory at an IRQL that was too high. In our case:

  1: kd > .trap 805ec89c
  ErrCode = 00000002
  EAX = ebx 00000007 = 8230971c ecx = 8233f140 edx = 00000000 esi = 823096e0 edi = 880e29e0
  EIP = 822f5010 esp = 805ec910 ebp = 805ec958 iopl = 0 nv up ei pl nz ca po nc
  CS = 0008 ss = 0010 ds = 0023're = 0023 fs = 0030 gs = 0000 efl = 00210212
  NT! ExAllocatePoolWithTag + 0x4ca:
  822f5010 895804 mov dword ptr [eax + 4], ebx ds:0023:0000000 b is?

  About the unhandled, exception generated by the TSRI driver corrupting the pool when he allowed it, he would lie ebx to the value stored at the address of eax + 4. contents of EAX look pretty fake to me (00000007), is whence the crash.

  1: kd > lmvm iastor
  start end module name
  83a 50000 83b2a000 iastor T (no symbol)
  Loaded symbol image file: iastor.sys
  Image path: \SystemRoot\system32\drivers\iastor.sys
  Image name: iastor.sys
  Timestamp: Mon Apr 05 12:21:02 2010

  Very old driver.

  Try to update the driver of the TSRI first of your manufacturers website and if not lucky, follow my guide here to remove it. Even if you're running Vista, it should still work if all goes well - http://answers.microsoft.com/en-us/windows/wiki/windows_7-hardware/uninstalling-the-intelr-rapid-storage-technology/e3c4b6d6-56ba-4ac5-be50-89843c9d9b22

• HP Compaq 6530 b forgotten BIOS password. Help, please!

  Notebook - HP Compaq 6530 b;

  SN - [number of Series edited by Moderator];

  I forgot my BIOS password and now cannot boot from other devices, from HARD drive, but he is corrupt and has been repaced by the news without windows.

  After 3 attempts of BIOS Setup does not give me any number, shows just message info "the system is locked. Please press the power button to restart the computer.

  Please help me to reset the BIOS password.

  DEP.

  There is not generators of master password for ProBooks or EliteBook and most laptops class business.

  You will need to contact HP.

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html?JumpID=reg_r1002_usen_c-001_title_r0003

  Or look at this link.

  http://forums.mydigitallife.info/threads/49497-HP-ProBook-EliteBook-BIOS-password-reset-utility

  Or replace the BIOS chip.

  http://www.eBay.com/ITM/HP-Compaq-6530b-6535b-6730b-6730s-6735b-6735s-6820s-6830s-BIOS-chip-no-password-/291190590051?PT=US_Motherboard_Components&hash=item43cc4fca63

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• Name - 2 or 3 good programs FREE to remove TROJANS from my old Compaq?

  Here's the situation. I have an old Compaq Presario V6000, working with XP. from now no budget for another computer. The place I'm in, just put hi speed connection.
  I want to get a FREE program to delete Trojans and would like to know, what you're suggesting? Thank you.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one. Windows 8 already has integrated antivirus.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• 1000N8601020-b: recover password for Compaq Presario PC

  How to find the password for a Compaq presario SR5710Y PC, which was given to me by someone who doesn't remember his password.

  Hello:

  If you are looking for the Windows password, unfortunately, I would not be able to help you with that.

  If you are looking for the power on password (BIOS), see the link below, last element (clear the BIOS settings) and inside this section, read the clearing BIOS password settings.

  http://support.HP.com/us-en/product/Compaq-Presario-SR5700-desktop-PC-series/3823953/model/3867472/document/c01237538/

• How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1-1007 D desktop PC

  How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1 - 1007 D desktop PC? THX.

  There were buttons No. brightness and contrast on the front of the monitor-no onscreen menu.

  On your desktop,.
  Right-click to select graphic properties->

  in display settings, click Advanced settings
  Here you go, you can do almost anything with the brightness

  Hope it helps

• Compaq mini cq10 bios password reset

  Please I need help to reset my password of bios compaq mini cq10 CNU0184TCN.

  Hello

  The unlock key is: e9l13uvae9

• Desktop Compaq with Windows 7 no reconnect to the internet after the awakening of the mode standby

  Info on the computer: Compaq SG3-150SC desktop computer, processor is AMD Athlon (TM) II x 2 215 with 2, is 7 MHz, bios American Megatrends Inc. 6.01, 23.4.2010 SMBIOS version 2.6, RAM is 4 GB total. OS is Windows 7 64 bit edition Home premium + service pack 2.
  
  ON THE PROBLEM

  This problem has happened recently. Once I turn on my desktop mode computer "sleep", it cannot reconnect to the Internet and I use only cable internet which computer is connected via ethernet to the cable-internet-modem/router cable. The computer seems to be able to view all available networks, but she was never able to connect to the Internet (after waking up from sleep). At the same time that the computer seems to have slowed a lot, I have no idea why, but I guess he's trying to reconnect to the internet and this process of reconnection is devouring its resources.

  I had other problems with this computer during this past year the half, but will not go into great detail with them now. These problems have been losing some dll. file that was ment to display the Win 7 great/normal devices connected to the computer, and a total system crashes / freezes after having updated graphics drivers AMD ATI Radeon 3000. However these problems seem to have disappeared after Windows 7 service pack 2 update. Also, I scanned the computer several times with a well-known and apreciated overall software security, no virus or other major security problems have been found.

  The only problem that seems to have the computer right now is just this question, I am trying to solve.

  Any suggestions to check and make what?

  Hello:

  A few suggestions, you can try...

  1. install the latest driver W7 ethernet of the Realtek RTL8105E ethernet adapter to your PC.

  Download, unzip and run the application configuration of the 2nd on the Web page below.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1 & PNid = 14 & PFid = 7 & Level = 5 & Conn = 4 & DownTypeID = 3 & getdown = false

  2. go in Device Manager, expand network adapters device category.

  Left click on the Realtek ethernet card.

  Click the power management tab, and uncheck the box to allow windows to turn off this device to save power.

• HP Compaq nx6610: power on password

  Hello

  I wonder is that someone could help me please with the power on password problem.

  I tried a few times to remove the battery CMOS even for hours but still not the same error.

  Any other suggestions?

  HP Compaq nx6110

  P/N: EK230ES #ABB

  I did enter 3 times and don't get that (*)

  @Skillie91

  Then SECURITY RIGOUREUSES is likely activated.

  

  I'm sorry.

  REO

• HP COMPAQ 6200 PRO SFF PC: Bus PCI 0, device 31, function 3 DRIVER

  I HAVE A PC HP COMPAQ 6200 PRO SMALL FORM FACTOR I KEEP GETTING MESSAGE ' CAN FIND DRIVER FOR CONTROLLER of BUS SM THE DRIVER IS: PCI bus 0, device 31, function 3 WHERE CAN GET THIS DRIVER? Thank you

  Hello:

  Download, unzip and run the file setup.exe from the link below... then reboot the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format?product=1145

• driver for hp compaq 8200 elite ultra need driver for PCi and PCI simple communication controller

  HP Compaq product xz788ut #aba

  32-bit Windows 7 profesional

  delete the original version and install our Win7 32 bit

  a 320 employees

  Hello:

  Who says it's the AMT driver that is necessary is what I gave you.

  Try the IMEI.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & swItem = VC-93346-1 & mode = 4 & IDX = 1 & prodTypeId = 12454 & prodSeriesId = 472276

  Paul

• SPDIF out on Compaq CQ40-122AX

  I have a Compaq CQ40-122AX, running VISTA home basic sp1.

  There IDT High Definition Audio built in and a HDMI output. He also says that it will be an available SPDIF output using a HP/Dock. Now, I'd like to use the SPDIF output, but I am reluctant to by the docking station for £200 as advertised on amazon. In the options for the Soundsetup there is a definition available also SPDIF.

  IDT HD Audio Codec driver version: 1.0.5934.0

  For IDT HD Audio DEVICE driver version: 6.0.6000.16386

  Only the input/output Audio/video are:

  VGA

  HDMI

  Headphone 3.5 mm

  Microphone 3.5 mm

  I had a browse autour and found that some HP models spdif output available via the Jack 3.5 mm as optics, when the adapter is plugged it activates an LED inside and that it moves the optical signal to the Toslink cable.

  Adapter cable and optical at Maplin

  My question is, the SPDIF is accessible on my model of laptop CQ40-122AX with this configuration without the HP docking station or could there be another way? Since there is not in there, it must be possible to access it somehow, and the docking station just seems too expensive to make sense.

  Look forward to hearing responses.

  Message edited by Sven on 18/01/2009 05:27
  何思凡
  
  Compaq CQ40-122AX, Vista Home Basic 32 bit, AMD Athlon x 2 1.9 Ghz, ATI Radeon HD3200, 1 GB of RAM,
  
  -Each one favor Post back your results, resolved or not - LET BRAVO!

  No solution is presented using computers laptops, built in the ability to use SPDIF for DD and DTS streams. The only solution that I found satisfactory is the external soundcards next via a USB port.

  I use the product bought in Hong Kong, works well with XP and Vista, that's what I tried ebay. The least expensive solution to the s/PDIF output, I found. It is an optical output.

  http://CGI.eBay.co.UK/5IN1-USB-6-channel-PCI-external-moveable-5-1-sound-Card_W0QQitemZ220338593076QQcmdZViewItemQQptZUK_Computing_ComputerComponents_SoundCards?hash=item220338593076 & _trksid = p3286.c0.m14 & _trkparms = 72 %3 A 1300 | 66 %3 A 2 | 65 %3 A 12: 39 %3 A 1 | 240 %3 A 1318

  http://www.Google.com/products?complete=1 & hl = in & q = USB + to + Converter + SPDIF & um = 1 & ie = UTF-8 & his = X & OI = product_result_group & resnum = 5 & CT = title