New keyboard will not work. The pilot is supposed to automatically load.

Similar Questions

• Keyboard will not work to start the Recovery Console repair function

  I would like to use the repair feature in Windows XP Professional Recovery Console when starting Onboard or USB CD-ROM drive.  My keyboard works very well to enable F12 and select boot device.  Windows Setup starts and then loads bunch of pilots - looking... but then my keyboard won't work for select 'R' to start the Recovery Console repair.  All this started because I uninstalled a Lexmark printer and it seems that the driver Lexmark LXBTtime.dll lack now but still wants Windows to start.   So now Config\System will not load.  I saw some threads in this forum recommend that my wireless keyboard does not work - so I borrowed a USB wired keyboard - but still the same problem.  Cannot select 'R' - the keyboard light turns off and of course not recognised by Windows Setup.  Any ideas or suggestions?  In addition to the purchase of a MAC (it was my suggestion of neighbors :-)   Thanks for the review!

  Hello

  In addition to the suggestion of Daavee I would also ask you try another disk of Windows XP installation and also you can try with a keyboard five General PIN and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• New Magic Keyboard will not work with Bluetooth

  On the page of the Bluetooth system preferences, my magical keyboard reads: "connected, charged.  I plugged it in to charge, because the new iMac does not recognize the keyboard, although I'm sure it was already fully charged.  I had already checked this system preference in the last hour.  If I disconnect the charge lead, the Bluetooth preference then bed: "not connected".  It serves more as a wireless keyboard.

  Hello there Bronco 01,

  Information and troubleshooting in the article tips below should help you to solve the issue with your Magic Keyboard not recognized by iMac.

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

  Ciao.

• New version will not work with the yahoo toolbar. How can I solve this problem?

  I downloaded the new version of Firefox, and it will not work with my yahoo toolbar more. It worked fine until I updated to the new version. I went back to the old version 16.0 and now he repeats to me my version is obsolete. How can I solve this problem and get the new version to work with my yahoo toolbar?

  To start, make sure you have the latest Yahoo toolbar.
  http://help.Yahoo.com/kb/index?page=content & y = PROD_TOOL & local = en_CA & ID = SLN5044 & print = false

• The Tecra A2 keyboard will not work

  When I turn on my pc the keyboard does not work! Usually, I have to turn off and on again several times until it is operational.

  I checked the Device Manager and there is no conflict of interest.
  Help, please! Very frustrating!

  Hello

  I agree with chain. If you can not use the keyboard from the first moments when the laptop starts it is probably a hardware problem. Try it also with the external keyboard.

  It will be very helpful if you can describe the situation more precisely.

• Microsoft wireless keyboard will not type the letter 'c' or type the number "3".

  My wireless keyboard will not let me type the let type me the letter 'c' or type the number "3". This works sometimes! Help please!

  This is a Microsoft wireless keyboard 3000 v2.0. It came with a mouse aswell which is working as expected.

  Any ideas? It's so frustrating!

  If you can, try the keyboard on another PC and try a different keyboard on your PC. If the keyboard has the same thing on another PC and another keyboard works well on your PC, it is "side on" hardware failure. Assuming that it is hardware failure, if it is under warranty GET it replaced, it is not you will have to buy a new one.

  Please mark this as useful or response if applicable.

  Tricky

• New keyboard does not work on Satellite L500-13W

  Hello.

  I have a Toshiba L500-13w (PSLJ3E-00X01G03) of the problems with the keyboard. The keyboard does not work. Already tested under windows, or to access the bios.
  I bought a new keyboard and changed. It does not work. Any way to solve this problem?

  Thank you.

  What happened with the laptop?
  You spill some kind of liquid on the keyboard maybe?

  The keyboard is connected to the motherboard with a flat cable
  If the keyboard on the motherboard controller was not damaged, then new keyboard should work

• Satellite A60: keyboard does not work, the recovery DVDs cannot run

  Hello

  I have a serious problem with my A60: the keyboard no longer works. I tried many solutions and the last of them, recovery with the Recovery DVD - ROM product does not work, because I can't use the keyboard!

  When the screen with the 3 choices, I have no opportunity to respond.
  Someone has an idea?

  Thanks a lot for your answer.

  They keyboard might not be the problem, or it may not be connected properly to the motherboard the best thing to do is to take it to a service center, it should not cost you anything, if it is still under warranty... but if it's just the keyboard and your laptop is out of warranty then it should cost more than 100-200... can't say how much exactly, because I have no idea.

• When I download a game it will not work the screen just keeps on changing color and color stripss

  When I supported a game it will not run the screen just keep changing colors and strips coloued

  Hello

  Please try to install the game in compatibility mode.  Here is some information that can be very practical...

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  -Check the functionality of the game under a spare user account

  Uninstall/reinstall the program

  -Clean Boot http://support.microsoft.com/kb/331796

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My logitech keyboard will not work and its new brand

  IM typing on keyboard on screen, I just bought a new keyboard and it won't work at all

  The drive itself seems to be OK - but you had some fairly significant problems that CHKDSK has settled, and there are perhaps still benefits from that.

  SFC - SFC System - Instructions
  Click the Start button
  type in the search box
  CMD. EXE
  Right-click on the single file that is

  Select run as administrator
  -the elevated command prompt window should appear
  At the command prompt, type

  SFC/SCANNOW

  and press the Enter key
   
  Wait for that analysis at the end - make a note of any error messages - and then restart.

• After that 8.01 updated the former saved passwords autocomplete but new sites will not display the ' remember me ' box. If the site has own box "remember me", it works. All my tools settings please remember passwords. How to make back box "remember me"

  For sites with a previous version, I deleted all cookies, bookmarks, and the old passwords and restarted. No luck.

  Some sites such as Windows Live (Hotmail) use JavaScript to create the input form and the Firefox password manager does not work in cases like this. You can use the extension to save the name and the password in such a case, you will not forget them, but Firefox doesn't fill them even if it was recorded.

• The button new message will not work in Gmail - it does with IE.

  The calendar very high buttons disconnection etc., dial button, task and contact in Gmail buttons do not work. All other keys are working. All work fine when using IE. I updated Firefox 3.6.12. Deleted all cookies cached, etc. & restarted.

  I've had about: config > dom.storage.enabled, for a week or so now fixed to false. There is no problem until the update of ff 3.6.12 yesterday morning when I started having the same problems as you all. I allowed all the scripts, the problem still persisted so I went back to about: config, enabled the true dom storage and voila, chat, dial began to work again. Just to check, I turned back on it to false, and it stopped working again. You can use the add-on betterprivacy autodelete cookies from dom storage, but it seems that google is no longer you can turn them off completely.

  information on activation/say-enabling in firefox, this is for windows, but should be the same for other os: http://www.sevenforums.com/tutorials/106540-dom-storage-cookies-enable-disable.html

  more about dom cookies: https://secure.wikimedia.org/wikipedia/en/wiki/Web_Storage

• Satellite C655 - new keyboard is not working properly

  I have fairly new Toshiba Satellite C655 and after spilling a (tiny) amount of soda on the upper left keyboard, the keyboard stop working completely.

  After you install a new keyboard, most of the keys work except the P, V, R, T, [and space keys. External USB keyboard works perfectly. I bought another new keyboard and replaced it with care, but the problem persists. After that, I tried updating the BIOS without result.

  Anyone who is familiar with this and knows how to solve the problem?

  Hello

  I assume that this question was not included in the past, before the drink is spilled on the keyboard. Right?

  This means that this fluid is the reason for the keyboard problem.
  I guess, both new keyboards are OK.

  In this case, the problem may be the motherboard or you used two keypads which are not entirely compatible. But I guess that this isn't really a problem.

  Maybe you card mother is affected. :(mais c'est juste une suggestion)

• Portege M750-11W - new battery will not work

  Hi all

  can anyone help, I got 2 batteries for my protégé m750-11w and they do not work and I wonder what I have to do a BIOS update for them. The batteyr in my protégé is PA3191U-5BRS and two new batteries are the two PA3191U-1BAS, and he says that this battery work where the - 5BRS was in use.

  I updated my BIOS from version 1.6 to version 3 already and the battery still does not work I just get a blinking white cursor in the upper left.

  Someone know where I can get an update of the BIOS except this battery?

  Thank you

  Tom

  Hello

  This means that Windows doesn't start with new battery and you see only the blinking cursor?
  This strange s you have connected the AC/DC adapter?

  In my opinion, you must fully charge the battery before starting Windows. After that try it again.

• HP Pavilion 550-055na: new disk will not install the new operating system

  Hello

  I bought a new HP Pavilion 550 - 055na with Windows 8 a month or two ago but want to use Windows 7. However, I decided that I will keep the hard, the PC came with, and have the option of Windows 8 in future if I want. So, I'm installing Windows 7 on a new hard drive.

  My problem is that the new copy of Windows 7 will not install on my new hard drive.  I get:

  Violation of secure boot

  Invalid signature detected. See the policy in the configuration of secure boot

  Then me to a black screen after I pressed Enter/Ok, who said the following.

  Check the presence of the media...

  Media present...

  On IPv4 PXE boot.

  If I press F12 on power on, I get a blue box asking me to select a boot device. The only options are:

  Realtek PCIe GBE Family Controller IPv4
  

  Realtek PCIe GBE Family Controller IPv6

  and the output by using the arrow keys

  How to change the secure boot strategy?  If I do, it means that I can install my 7 can I on my new hard drive? Also, providing that I do, I always will be able to use my Windows 8 OS drive after changing the secure boot strategy?

  Any help would be appreciated to greately.

  Sincere greetings

  DJ

  Hello:

  You have to enable the legacy mode and disable start-up secured in the BIOS to be able to install and run W7.

  Please see this link to find out where these settings... this references adding a video card, but this is how you change the settings no matter why you need to change.

  http://support.HP.com/us-en/document/c03653200/