HP compaq nc6000... reinstalled, but no wireless connection

Similar Questions

• WT200 3G - manager says wireless connection is off

  Can someone please. I have a Tablet WT200 and try to use/installation of the component of the 3G...
  But the wireless connection manager continues to tell me that the radio is turned off.

  There is no switch and I've searched the net for a solution but I have seen the same question but not the answer.

  Help me! PLEASE, I BEG YOU!

  Does not WT200 Tablet contain a physical switch to turn on WLan. You must ensure that the communications function wireless (in Win 7 settings) is enabled!

  You can do this in the start menu-> Control Panel-> network and internet-> network and sharing Center
  Here, press Set new connection or a network

  At least, you should go to: start-> all programs-> Toshiba-> network & connectivity-> Wlan indicator settings
  and may display the State of the Wlan connection system

• Wireless connectivity is not visible on my Satellite A110-162

  Since I use the product recovery CD on my Satellite A110-162 (PSAB6E-OOZOOQEN) I can't get a wireless connection.

  When I go to Control Panel/network connections, it shows the available rigid cable but not wireless connections.
  The orange light is on and have tried Fn + F8 but without success. Doctor of connectivity do not show and wireless.

  Any ideas?

  It is somewhat strange that you can not use the WIFI connection after recovery image installation.
  And how you used it in the past?

  Is the card properly installed wireless (Device Manager)?

• no wireless connection

  Hello. I installed windows xp on a thinkpad z60m. Everything is in order, but the wireless connection. I am unable to connect to my pc as the system says that I have to contact the system administrator. What can I do? Where can I insert the password? The pc detects the net, but without giving me a windows to write the password. I tried to create a new connection, but always without result...

  Thank you and sorry for my English

  Davide

  Try to go through these known scenarios may be it will help you

  http://www.Microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx

• Wireless connection not working do not. WLAN start not

  My wired connection works perfectly, but the wireless connection does not work.

  Autoconfiguration WLAN service does not start. It displays ERROR 1747: authentication service is unknown.

  I've tried the checker system SFC.exe tool
  It says "Windows Resource Protection has not found any breach of integrity."

  I use Windows 7 Homebasic. Dell.Please help.

  Reset the Winsock seems to help some users.

  No Internet access. error 1747. and the dependency service or group failed - Microsoft Community
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/no-Internet-access-error-1747-and-dependency/db14d65b-6e9d-4964-93a0-e0b00506d7f6

  I would create a system restore point before you try to reset the Winsock.

• Wireless connects to the router

  A week ago my laptop has been infected with malware/spyware.  Since my laptop could not connect to the internet.  Once we have removed the malware/spyware, I was able to connect with a cable.

  But my wireless connection still does not work properly.

  I can see the network, the signal is excellent, but when I connect it is little or no connectivity.

  Dell Inspiron 2200 laptop

  Microsoft Windows XP Home Edition Version 2002 Service Pack 2

  Inter (R) Celeron (R) M

  Linksys Wireless-G

  Any suggestions would be greatly appreciated.

  
  

• NB100 - see network wireless, but unable to connect

  My girlfriend has removed the Atheros driver on his NB100. I just reinstalled the driver of this forum and the wireless icon is back in the lower right. I however still unable to connect to wireless internet and am use to operate the wireframe.
  Free configuration can see the wireless network but will not connect and windows said: there is none in the range.

  Help, please!

  Hi ig88uk,

  Please check the contents of the forum on the problems of WIFI. You will find hundreds of questions and I think that already is written here in the forum.

  I searched a little and founded this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=49920&TSTART=50
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=51858&TSTART=0

• HP Mini 2102, wireless detects networks but does not connect

  Hi, I have recently reinstalled Windows 7 on my HP Mini 2102, downloaded this driver
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 32...
  
  I tried to reinstall, but it still does not work.

  Finally solved the problem, I ran CNettoyez and deleted the registry who have not been used, worked like a charm and now I can connect wirelessly.

• problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

  Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

  Hello

  Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 2: Troubleshoot wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

  You can also post your question in the forum of Lenovo to get help:

  http://forums.Lenovo.com/

• WRT54G good signal wireless but no internet connectivity.

  I have a WRT54G that has worked well for about a year. Last Sunday, I installed a couple of small updates from Microsoft on my main computer (cable via an ethernet cable from the router). At the same time, I installed service pack 3 on my girls (wireless) counter top.

  Since that time, on my three computers wireless I shows the strength of very good signal from the router but no internet connectivity. Internet works fine on the computer by cable.

  I have reset the router, no luck. Updated the firmware, no luck. Released and renewed until the cows came home and still no luck.

  I uninstalled the router of my main computer and reinstalled. During the installation it tells me that the router cannot find the internet even if the computer that works is connected through the router.

  I tried a different router (even part old version) which was a router to work when uninstalled about six months ago. I went through the installation process and it is the same, the router cannot find the internet.

  Is it possible to have two bad routers that the internet can pass through but the router cannot detect?

  At first I thought changing the setting of the Microsoft updates, but I restored my computer to a date before the updates and still have the same problem.

  Any help that anyone can give is most appreciated.

  Well there are some knows the problem with Service Pack 3 from Microsoft with wireless connectivity. You can uninstall SP3 from your computer and it will not solve the problem.

• C7250 connected wireless works with wired ethernet PC but not wireless PC

  C7250 installs fine with static IP address and wired (ethernet) PC works perfectly, but is not recognized by the PC wireless.

  Can ping the IP of the PC cable but not wireless computers.

  Can connect to the IP address of the browser and can logon to the wired PCs of wireless computers.

  When the wireless PC is connected to the network with ethernet cable the C7250 works perfectly.

  Firewall is not the issue because I tested with the firewall disabled.

  Any suggestions?

  Thank you for your help.

  I FINALLY FOUND a RESOLUTION but let me describe what I've done to isolate the problem so that others will not do the same things I did.

  I used my Windows CE PDA and connected to the wireless router. I made sure that IE could access a different print server wired for a Brother HL-2140 I 192.168.2.10 and it worked. Who checked out that IE was working with a wired device. I then went to Yahoo!, and it worked. Then, I tried to access the C7250 configuration using IP 192.168.2.20 address in IE and it failed. (I checked with my Wired PC I could have access to the configuration of C7250 via IE.) I expected this result.

  Then I connected the PDA via USB and verified that I could use it to access the configuration of C7250 use IE on the PDA and it worked.

  I then tested between two wireless PC. Could not connect to each other through the router. But if one of them has been wired and one wireless they connected and I have consulted the disks between computers. I also tested the two cables with the same results.

  THE PROBLEM WAS IN THE ROUTER.

  These tests again virtually eliminated all PC, firewalls (since I've tested with the firewall disabled), the C7250 and the print server for the HL2140 brother as being the source of the problems.

  I then updated the firmware of the router to the latest version and repeated all the tests carried out in the complete thread and had the same results.

  RESOLUTION:
  The router I was using was a Linksys WRT54GS Ver 1.

  I also had a backup router which is a Linksys WRT54GS 7 worm that had the same settings as the Router 1 worm.

  I changed the SSID of the original router (Ver 1) so I would not need to change the SSID in all my devices during testing with the router Ver 7.

  I checked the firmware on the router worm 7 was the later and pulled up.

  The first test I did was to use a ping wireless PC the C7250 192.168.2.20 and it worked!

  I then used the wireless PC and IE to access the configuration of C7250 192.168.2.20 and it worked!

  I then checked the port for the C7250 was still a TCP/IP port to 192.168.2.20 and sent a test page to the printer and it worked!

  I consulted quickly wireless configuration C7250 and printer a test of a PC cable page and that worked!

  Finally, I tested PC wireless wireless PC PCand wired PC and the dirves successfully in both directions and checked that PC wired to wired PC was still working as before.

  All that remained was to supply two routers and router swap 1 worm with the Ver 7 router and rerun the tests with the router to Ver 7 manage my real network. Everything works as it should.

  I'll keep Router 1 worm as a backup to the Ver 7 knowing router unless the router worm 7 does not only feature that I lose when I reinstall the Router 1 worm is wireless connectivity to wireless, and I can temporarily work around until I get another router that is likely to be a "n" because what is have is ' G;

  THANK YOU FOR ALL YOUR HELP PRINTDOC!

  PRINTDOC BRAVO!

• 4500 wireless connects with 2 systems but not a third party.

  All of the recommendations noted in all HP sites were conducted.  Gets the path looking for connection test

  but then fails at the end.  I've uninstalled and reinstalled the software several times.

  I have disabled the firewall (firewall even on other systems).   Printer can be seen by web access, and

  is configured correctly.  Have it connected to the third system now via USB.   System is running XP sp3 with

  the latest from MS and all the updates from HP. (HP system).  Other systems that work are a laptop

  with XP and a Vista system.   With the exception of the laptop that is wireless, other systems connect through

  a switch to a D-link router Dir 655 B.   Note that you can have the USB connection or wireless connection in even

  time on this printer.  Any ideas?   And please do not repeat the most obvious of which have already been addressed.

  (Note I work on computers for more than 40 years and know the networks, etc., etc.)

  Thank you.

  Don't know why, but just to the dickens, have you a device add tonight, after a few days with

  the PC race, print to the printer via the USB port.   Added the printer wireless, and she said very well...

  No changes to the system, etc., etc...

  So now have the printer installed twice on this system - USB and wireless.

  Would be nice if the installer fails he looks a why...

  Thank you all anyway.

• no wireless connection on compaq cq62

  Hi, I just reinstall windows 7 on compaq cq62 and there is no wireless connections available help pleaseee

  DOWNLOAD THE WLAN DRIVER FOR YOU SYSTEM FROM HP SITE AND HE INSTAL

  http://WWW8.HP.com/us/en/support-drivers.html

  Good luck

  <------DONT 4get="" to="" click="" on="" the="" kudo="" star="" on="" the="" ryt="" side="" to="" say="" thanks="" if="" i="" helped="" you="">
  I AM NOT AN EMPLOYEE OF HP, SO YOUR ANSWER WILL GIVE ME THE INSPIRATION TO CONTINUE IN THE FORM...

• I have recently reinstalled Windows 7 and now I have no option for wireless connection and wireless adapter is not (wireless connections do not show up when I go to set the new connection)

  I recently installed Windows 7 on my PC, and now when I try to set up a new wireless connection, it's impossible. My plug-and-play wireless adapter is not recognized by the computer (but he did more earlier today before installing Windows 7). NETGEAR has the appeal of Microsoft, Microsoft refused to help me for less than 80 bucks, which I can't afford, after buying their product of GD.

  So I was wondering if someone can help me? On my laptop when I go to the networks and together a new network, there is an option to set up a WIRELESS CONNECTION. Can someone help me please? I can't afford $ 80 to tell what drivers to download.

  Thanks and + karma to one who can help me solve this problem.

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• My computer connects to my wireless connection but it say no Internet access

  Original title: my computer connects to my wireless connection but it say no Internet access

  I have windows 7 I don't know that much about computers, so I do not know what information you need to help me, but if anyone can help me get back on the Internet would be great, I have used the computer before and it worked very well my brother and dads computer still works fine in fact my iPod touch but I need my laptop for work someone ' a please help if you need more information I would like to know how I get the info from my computer and I'm going to do.  Thank you

  I rebooted my router also I uninstalled my card wireless on the laptop and reinstalled computer I also deactivated and activated the wireless network connection and now I have a mini port Microsoft virtual wifi, which I disabled it I don't know what else to do

  Hello

  1 did you do changes on the computer before the show?

  2. What is the exact error message you get?

  3. What is brand and model computer?

  Method 1: Turn off the antivirus

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-US/windows7/Disable-antivirus-software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 2:

  Follow the troubleshooting steps in the site mentioned below:

  Windows wireless and wired network connection problems

  http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows.