Satellite A200-244 does not connect to wireless networks

Similar Questions

• Satellite A200-1BJ does not start

  Hello

  My Satellite A200-1BJ does not start. After turning on the button it starts only for 1 or 2 seconds (flashing light, work from HDD, fan work, display blank) and then it turns off automatically. Once it happened days before but I didn't have the time to solve it and over the next few days, he has not occurred. Now, I tried to launch it more than 20 times and it still won't start.

  I tried only with full battery and also only with the power adapter. I removed the HDD, RAM, keyboard, DVD, speakers, display and a few other connector under the keyboard and it still does not start and it shuts down after 1-2 seconds each time.

  In recent months he sometimes exploded due to overheating during work so I cleaned the dust inside.

  No problem with the motherboard or power?

  Thanks for help.

  Hmmm... on this virtual path, it is not easy to say what the problem is. described behavior is the same as in cases when the BIOS is dead after failed BIOS update installation.

  Of course, it's mainboard problem but what exactly, it is not easy to say. For me, this looks like faulty BIOS.

  Have you installed any updates or anything that may be responsible for this?

• Satellite A110-294 does not recognize the wireless card

  Hello

  the question is:
  Why my Satellite A110-294 does not recognize the wireless card?

  I re - install Xp PRO with all the drivers.

  I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

  I don't understand, can you help me?

  Thank you
  André

  Hello

  To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

  You can find the latest driver for Atheros WLan here:
  http://APS2.toshiba-tro.de/WLAN/

  Just a question;
  You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
  The driver is missing, then the device must be marked with a yellow exclamation point

• My daughter's iPad does not connect to my network, although mine don't?

  What to do when the ipad to my daughter does not connect to my network?

  You talk about your Wi - Fi network? If a single iPad of your daughter does not connect while other devices are working properly, the first thing to do is to reset the Wi - Fi router. Powering the devices iOS and computers connected to your wireless network. Then turn off the router. Wait 30 seconds and turn on the router. After it finishes its startup routine and shows a good access to the Tower of the internet on your iPad, etc..

• Widows XP does not connect to my network.

  Widows XP does not connect to my network. (wired or wireless) The network is functional and all I can understand is ipsec driver service could not start because the specified file is not found. I tried to reinstall the drivers for my wireless card, an external wireless adapter and plug it directly into the router. It detects the network but will not connect to it.

  This could be caused by a virus.  What application antivirus do you use, and is up to date?

  In particular, see tcpip.sys.

  There are probably several copies of this file on a typical system of Windows XP.  The copy of 'work' found in C:\Windows\system32\drivers with a backup copy in C:\Windows\system32\dllcache.

  You can have additional copies in C:\Windows\$hf_mig$\KB951748\SP3QFE and C:\Windows\$hf_mig$\KB2509553\SP3QFE

  Assuming that your system is up-to-date, the tcpip.sys version should be 5.1.2600.5625.  It should be 353 KB (361 600 bytes).

  You might consider doing a virus scan online with, for example, http://www.eset.com/us/online-scanner/ or download and analysis with the multi-AV tool of David Lipman, which you can find here http://www.multi-av.thespykiller.co.uk/

  I also suggest to download, install, update and equipped with a system full scan with two of these free tools:
  Malwarebytes AntiMalware
  SUPERAntiSpyware

• My computer does not connect to my network... !!!

  Hi, my Dell laptop (Inspiron 1420) work properly after that only after a certain time he reported that the wireless card will not work correctly. Now, the laptop does not connect to my network more, even with cable LAN, I checked the Device Manager and I found a yellow exclamation on the Microsoft ISATAP #2 map then I double clicked it only to discover in its properties of this statement, "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Well, I try all I can, but the problem is still there, and the laptop won't always connect to my network, please anyone has an idea as to what I could do please answer as soon as possible. tThank you.

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• HP configuration wizard does not detect my wireless network.

  Hello

  I have a HP Photosmart C4580 multifunction device for a few years, works as a printer/scanner wireless for the household. In the House, we have an iMac, a Macbook Air and two computers HP laptop.

  Last weekend I bought a MacBook Pro in lieu of the iMac and a router Airport Extreme Base Station to replace my ISP provided. Since then, I can't have the printer hooked up again.

  All the wireless devices in the House for example iPad, iPhones etc connect the new router without problem so I'm glad that the wireless signal is OK.

  I downloaded the latest HP Setup application and it ran with the printer connected by USB to install on the MacBook. However, even if the USB device is detected when I try to configure it to the wireless, the installation software does not detect my wireless network.

  I tried the following: -.

  -Rebooted router

  -Reset default printer is turned off, unplug the unit and unplugged the cable, left for 30 seconds then reconnected again.

  -Created a new comments system.

  -The router is configured to run g and n network.

  -The network names have any unusual characters.

  -Tried to enter the name manually.

  USB printing is fine.

  Is there something about the installation wizard that can not locate networks?

  OK, on the front of the printer, go to wireless menu and restore the default settings.

  When you start the HP software to connect the wireless printer, make sure that the USB cable is NOT connected to the printer.  Only connect when the software tells you to do.

  Be careful with the comments network, if your computer or printer connect you will not be able to print.

• My computer still does not connect to my network

  I don't know why, but my computer still does not connect to my network. I think that I have is that one day google chrome sayd that something has stopped. It was something about the proxy options. He finds that google chrome could not find any proxy... ehhhh thing. I don't know what his name. but can you guys please help me about this?

  :)
   
  Original title: network problem

  Hi Jakop

   

   

  Thanks for posting your query in Microsoft Community.

  According to the problem description you provided, I understand that you are facing in network problems in Windows 7. I will certainly help you in this matter.

   

  You use a wired connection or wireless?

  Please follow the steps in the link.

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• My UK 6s iPhone does not connect to the network in Germany?

  My UK 6s iPhone does not connect to the network in Germany?

  'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

• Hello my iPhone 6plus does not connect to the network on the upper left side of the screen it ust say research

  Hello my iphone 6plus does not connect with the network on the upper left side of the screen it say research

  Have you ever tried troubleshooting mentioned in this article?

  If you cannot connect to a cellular network or cellular data - Apple Support

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Windows 7 do not connect the wireless network adapter

  When in Device Manager it is k o workining with all installed software & advance mode: saying activated

  OM

  Original title: windows 7 do not connect the wireless network adapter when in Device Manager, it works with all installed software & advance mode: saying activated

  Hi omsaini,

  Thanks for posting your query on the Microsoft Community.

  Sorry to hear that you have to connect to a wireless network adapter trouble.

  To help you further on this subject, it would have been really helpful for us if you had

  mentioned a few details such as:

  (1) is there an error message you get when you try to connect to the internet?
  (2) is the persistent problem with all browsers installed on the machine?
  (3) what is the brand and the type of the network adapter (whether ADSL or an adapter included)?

  However, there are a few steps that we can try first:

  a. the following link has a very good tutorial on how to install a network adapter on the computer:

  http://Windows.Microsoft.com/is-is/Windows-XP/help/networking/install-wireless-network-adapter
  (Note: the link is for Windows XP but works for Windows thus 7\8)

  b. the following link provides a holistic approach for DIY difficulty on the connectivity of Windows:

  h ttp://Windows.Microsoft.com/en-US/Windows/Network-Connection-Problem-Help#Network-Problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  c. also, you can visit the following links as well:
        http://Windows.Microsoft.com/en-us/Windows/cant-find-wireless-network#1TC=Windows-7
  And http://windows.microsoft.com/en-us/windows/cant-connect-to-network#1TC=windows-7

  I hope this helps. Please contact us if you encounter any problem.

• Satellite L300 - does not connect to wireless internet

  I have a satellite L300 (part No.: PSLB8A-0SN004) took me right back to the factory settings (out of box).

  I opened internet connections and all the usual wireless names were there.
  I tried hang my internet (wireless) home and tried several times, with the correct password, however it just does not connect.

  I tried to install the Realtek RTL8187B Wireless LAN driver both Atheros Wireless LAN Driver, but neither helped.

  The Wi - fi switch on the front is also in position to position IT. Please help I have to up my laptop up and running as soon as POSSIBLE.

  > I tried to install the Realtek RTL8187B Wireless LAN driver both Atheros Wireless LAN Driver, but neither helped.

  If the wireless network adapter is recognized in Device Manager, you n t need to install the WLan driver.
  In addition, you said that you can see the wireless networks available in your environment. This means that the WiFi is enabled and works

  I think that you should disable the WiFi settings (WEP, WPA, etc.) only for testing purposes and should try to connect the laptop to the network open, if possible, that means that you badly chosen encraption or the password.

• Satellite M30-106 - does not connect via radio

  Hello
  hope someone can help im having headache with my Satellite M30-106 problems

  I can connect to the internet via ethernet, but once I delete it does not connect via radio. I am trying to connect to a router broadband Sagem sky but for some reason any he just not going, when I open wireless connections, I can see the projection of router as safe but just cannot connect.

  I would also like to point out I am very new on wireless and to be honest, I don't know what im doing please give me advice in simplistic terms you can so I can be sure I understand where im going wrong

  Regards wayne

  Hello

  If you try to connect to your router, you will ask for a password or what exactly is going on?

  Maybe you should try to update your laptop WLAN driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Also make sure you use the same WiFi standard that you have configured on the router, for example 802.11 g.

  What operating system do you use? Have you installed all service packs and patches?

• Satellite L655 sometimes does not recognize the wireless card

  I have a L655. Most of the time it works perfectly fine. Sometimes when I turn on my computer, it does not recognize my wireless card. He considers that it is not at all.

  The icon in the status bar says that there is no cable ethernet plugged in and nothing on the wireless.
  Usually this icon is not present, and one for the wireless is (whether it is connected or not and if there are connections available or not). In the device manager there is nothing for the wireless card.

  Under network card it has only ethernet. Its as if it does not exist.
  Basically the way to solve this problem is by restarting simply my computer until he figures it.
  Sometimes, it can take 5 or more times.

  Any help please?

  Hello

  What satellite L655-xxx you have exactly?
  As far as I know there are different models with different wireless network cards.

  Your BIOS is up to date? Please check this box.

  So now to a few proposals of solution:
  First of all that I recommend to check if the update of the Wlan driver would improve the Wlan functionality.
  In addition, you must deactivate the energy saving feature for Wlan in Device Manager and Windows 7 power options as well.