HP dc7100 SSF, XP Pro, Mem: DDR PC2700, DDR PC3200 non - ECC, 512 MB memory

Similar Questions

• What Satellite Pro A120-I own? -You want to expand the memory

  Hi all!

  I want to upgrade the memory on my Pro A120.
  When you are looking for is the right kind, I wonder if I am owner of a
  A120-102
  A120-103
  A120-104
  etc.

  The list goes on and.

  I only know that he has a
  Satellite Pro A120 - 10 M
  PSAC1E-0QL054DU

  How do I know what AE figure should choose behind the A120 -?

  Someone?

  Thnx!

  And where you want to check the type of law?

  As you can see from the thumbnail you Satellite Pro A120 - 10 M. It's the answer to your question.
  Anyway, the memory modules compatible RAM for your laptop are:
  PA3499U - 1 M 25 (Kit of memory 256 Mo DDR2-667)
  PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
  PA3512U-1M1G (memory 1 GB DDR2-667 Kit)
  PA3513U-1M2G (memory 2 GB DDR2-667 Kit)
  DDR2-533 256 MB (PA3389U - 2M 25)
  512 MB DDR2-533 PA3412U - 2 M (51)
  1 GB OF DDR2-533 (PA3411U-2M1G)

  Your laptop can handle with 4 GB of RAM. So if you want to have the maximum amount of RAM, you must use 2 x PA3513U-1M2G.

  I have it? ;)

• Satellite Pro A100-622 can not read the card SD and Memory Stick with Windows Explorer

  I have a Satellite Pro A100-622 running MS Vista Home Basic Edition. I tried to use the card reader integrated with SD and Memory Stick card but cannot view the contents using Windows Explorer.

  In both cases, the laptop recognizes the card and try to install new hardware. Unable to do so, he asks the drive of the software provided with the cards. Any software not provided with a card and I cannot find drivers to make the drive work.

  The only application that I can find on the laptop that is associated with the player is a module of SD formatting, but I don't want to format the card (s) I want to just read the current content of them and add files.

  Any ideas?

  Hello

  You can download the drivers (and especially in your case for the sd-card-reader) here:

  http://PC-support.Toshiba-Europe.com/Vista/

  and here

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

  So the other point is the service of the SD card must be enabled in the start menu-> Control Panel (change to Classic view)-> Administration-> Services-> Chip card (at this point, you must activate the service and configure it to start at windows startup).

  If you have any other questions, just ask. ;)

  Good bye

• I just bought a MAC pro. I signed in but none of my apps to my other apple devices are in section purchased from iTunes. How can I get this new macbook to access the apps I bought before I bought the macbook?

  I just bought a macbook pro. I failed to access applications that have been purchased before buying the macbook. I use the same apple ID. How do you get apps already purchased?

  Hi SupaDupaTrini,

  If you don't see the applications you have previously bought for download, I would first examine the history of your purchases using iTunes on your MacBook Pro software:

  See your purchase history in iTunes on Mac or PC store
  https://support.Apple.com/en-us/HT204088

  If you do not see your purchase, it can be hidden. Learn how do to hide or show items in your purchase history.

  If you can't find an item that you purchased from the iTunes Store in the last 90 days, report a problem. For older purchases, contact the iTunes Store supportand some purchases, billing and redemption.

  Download your latest purchases
  https://support.Apple.com/en-us/HT201272

  Before you can access a purchase, you must do the following:

  1. To log in with the Apple ID you used for the original purchase. Use the following steps to see what Apple ID allowing you to download something.
  2. Check if the purchases you are looking for are hidden. If your purchases are hidden, you can see them not even after following the steps below. Learn how to view purchases.
  3. See if content is available for the redownload. Previously purchased may not be items not available if they are no longer on the iTunes Store. Also, make sure that you are in a country whereyou can redownload points. If you have changed your Apple ID from one country to the other, you cannot download items you purchased in a previous country.

  Take care

• I have a MacBook Pro Late 2011 15 "." I want to improve my memory from 4 GB to 8 GB. I bought 4 additional GB and when I went to change there are 2 - 2 GB instead of 1 to 4 GB. I think that I have only two slots for cards what is the best thing to

  Too much information in the topic. First time. My concern is that I have 2 - 2 GB cards I thought that there would be 1 to 4 GB, and I could put the extra 4 GB in the second slot. What is my best course of action to upgrade to 8 GB?

  Thank you for your help

  dknitter2

  Get an another 4 GB of RAM so that you have a pair.

  Make sure that your RAM meets the required specifications for your computer. Go to crucial.com and use the scanner. It will tell you what RAM works with your computer.

• LaserJet Pro 200 M276nw: Scans can be recovered from the internal memory to a Laserjet Pro 200 M276nw?

  Hello.

  I wonder if a tech-savvy person would be able to recover scans of the internal memory of the all-in-one M276nw?

  As in, is it possible that confidential info of the analyses could be recovered by the unit once it has been sold, recycled, etc.?  I wouldn't see my Bank and that operations that no info there...

  I guess it's not as simple as pushing "get it back" in a menu, but someone with a material and ill intentions would be able to sort?

  If it is possible, how do I clear it?

  Thank you very much

  Hi @e9999 ,

  I see you want to erase the internal memory of the printer. I can help you.

  I can send you this information in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  Good day!
  Thank you.

• OfficeJet Pro 8630: ink cariage jam and non-existent paper jam

  My printer is a little more than a month and the print head had to be replaced on the first day and was able to print 1800 pages with no problems and now a month or so later she constant ink cariage jam and no paper jams and past every 5 to 30 pages. Also tried each end help on hp.com support page

  Hi @michael6582,

  Thanks for trying!

  The printer must still be guaranteed if it is about a month. These printers come with a one year warranty.

  There may be a problem with the printer hardware. I suggest you contact HP Support by phone they may have addition resources that could help lead to a resolution.

  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

  Step 1. Open the link: www.hp.com/contacthp/

  Step 2. Enter the product number or select Auto detection

  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

  Step 4. Scroll down and click on: contact HP options - click Get phone number

  File number and phone number are displayed.

  If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Module of RAM not recognized on my Satellite Pro A60

  Hello
  I have a Satellite Pro A60 and recently bought a RAM of 512 MB memory upgrade.
  I have fitted on the correct port, however, there does not appear to be be achnoledged as being there.
  Can someone help me?

  [Edited by: admin August 31 05 19:02]

  Hi Robert,.

  I guess your A60 has two RAM ports, then I suggest that Exchange you the two RAM modules autour to check if the port rather than the modules itself that is the source of the problem.

  I hope that you took of anti-static precautions before manipulating the new RAM module. They are easily damaged by a discharge of static electricity.

  HTH

• Pavilion A700 n memory upgrade

  Hello

  I want to upgrade the RAM on my Pavilion Z700 n that was installed with 512 MB. When I got outside, the label on it said that it was a PC3200 400 MHz DDR.

  But when I checked online, the manual said that it the PC uses PC - 2700 RAM.

  Also, when I checked in with Crucial line for the compatible modules, the site suggested that I could have a maximum of 2 x 1 GB PC-3200 modules while the manual says I can install up to 2 X 512 MB PC-2700 modules.

  Could someone clarify if I can install 2 X 1 GB PC-3200 modules on the machine?

  Thank you

  Your PC has a motherboard ASUS A7V8X-(Kelut) . The plug from motherboard to state that it will accept 2 GB PC2700 / memory modules DDR PC2100 non ecc.

  Think this Crucial than said you. The modules are guaranteed compatible with that upgrade is expensive compared to upgrade a PC more modern that uses DDR2.  PC3200 modules will have their speed downgraded by your BIOS by the SPD settings that the BIOS sees it in the code memstick. PC2700 / non ecc PC2100 modules are simply not easy to find because they are no longer manufactured.

  Yu will have to remove the installed OEM memory modules and use only new replacement modules

  Published by erico on 26/01/2009-05:58

• Having trouble finding compatible RAM

  Hi there, ok so I bought 2 GB KIT 2 x 1 GB PC2700 333 MhZ DDR NON ECC OFFICE RAM MEMORY SAMSUNG 2 kits, so total 4 GB of RAM, I have a HP D530 SFF Mini-Tower and everywhere I went, told me these sticks must be compatible with my system.  I tried 1 at a time, both 2, 3 and 4 at the same time, this system will not recognize the sticks, does anyone have advice as to why they do not work, I don't want to go wasting money again before ordering anything else for the same result!

  It's embarrassing when you say "everywhere where I went, told me that these sticks must be compatible with my system". If you ordered a site that was generic or specific.

  Individual:http://www.4allmemory.com/memory/compaq-hp-business-desktop-d530-sff/

  generic: just googling PC2700 333 Mhz?

• Memory for the dimension 2400 choice problem

  I am looking to order more memory.  A concert stick would be nice.

  My problem is the manual system provided with the Dimension 2400 says this:

  DDR SDRAM memory architecture
  Two memory connectors
  Capacity of memory 128-,-256, or 512 MB

  Maximum memory 1 GB
  Memory type PC2100 (266 MHz) and PC2700 (333 MHz) DDR
  SDRAM (non - ECC)

  To purchase memory from Dell Web site says this:

  Memory Dell approved

  Maximum memory: 2048
  Number of slots: 2
   

  512 MB memory Module for Dell Dimension 2400 / 2400C / 4600 Desktops $ 33,14

  1 GB Memory Module for Dell Dimension 2400 / 2400C / 4600 desktop $ 55,14

  If the Dell system manual is not saying 512 k by maximum stick and the Dell store saying 1 GB max stick?

  I would like to get a 1 GB stick.  What should I do?

  Hmm... I just read on user 1 GB stick magazines that many are running in their Dimension 2400.

  Message edited by Newbee video on 14/08/2008 16:59
  
  

• Updated Saturday Pro M40 RAM

  Hi, I'm looking to improve my memory in my satellite pro M40, but I'm a bit confused as to what is compatible. He mentions SO-DIMM in the manual, but is this related to DDR or DDR2 at all?

  Thank you

  Luke

  Hello

  I put t found any info on the PC4200 modules but I agree with Joey. The Satellite Pro M40 supports PC2700 memory modules.
  Also on this page:
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=20147&ft=m&St=3

  Here, you will also find the compatible modules.

• Satellite Pro M30: Question on the new RAM

  Hello!
  I'm going to upgrade memory RAM.
  Is this ok, buy 2 x SO - DDR PC2700 0512 MB Kingston [KVR333X64SC25-512] or 2 x SO - DIMM DDR 512 (pc-2700) Transcend?

  Thank you.

  Hello

  Satellite Pro M30 supports these modules;
  PC2700 256 MB (PA3311U - 1 M 25)
  PC2700 512 MB (PA3312U - 1 M 51)
  1024MO PC2700 (PA3313U-1M1G)

  PA3312U - 1 M 51: RAM SODIMM 512 MB DDR 333 MHz/PC2700

  You must use the Toshiba recommended memory modules and you have don t use all modules of no name.

• Upgrade memory from 256 to 512 MB on Satellite Pro A60

  Just want to confirm really what I got caught once before buying the bad memory. I read another thread, so am sure I'm ok with that.

  OK, the RAM, I need for the upgrade of the Satellite A60 Pro is:
  200-pin SODIMM, DDR PC2700 Unbuffered CL2.5 (Non - ECC)

  Maplin:
  http://www.Maplin.co.UK/search.aspx?criteria=A31CG&doy=24m12
  A31CG DDR 2700 512M SODIMM

  Crutial
  http://www.crucial.com/UK/store/mpartspecs.asp?mtbpoid=04FE6CD8A5CA7304
  512MB 200-pin SODIMM, DDR PC2700 upgrade for the Toshiba Satellite Pro A60 Series notebook

  I don't think that 1GIG RAM is needed for my daughter :-)

  Note: On my main PC, I got defective Crutial Ballistix memory, but Crutial were very good replacing it for free.

  Thank you and a Merry Christmas and a happy new year to all of you on this forum.

  Ah, just another thing I'm not clear on.

  The NEW RAM replaces the existing, in other words I have remove the 256 and replace it with the 512? Reading the user manual, it is not clear and talks about expansion module. Probably, it would be obvious if I opened it to the top, but I'd rather not at this stage.

  Thank you

• SAT PRO A60 memory upgrade

  is indicated by the documentation of edgetech corp, I bought a 1 GB PC 2100 DDR SO DIMM Toshiba OEM KTT3614 memory.
  After installation, the laptop does not start correctly showing a blue screen with the following message:

  page-fault-the-area non paged
  so the problem with the win32k.sys file
  the with the file ati2dvag.ddl

  then the following error IRQL not less or equal
  Start and shut down in a continuous sequence
  I have updated with the latest version of the BIOS, but the computer does not start correctly
  Need help
  Thank you
  My computer is a 01L00XFR SAT PROA60 PDA 65F with Windows XP pro

  [Edited by: admin]

  Hello

  The easiest way to see if the error occurs due to the memory card is to remove them and restart the unit. If the unit works properly without resend memory.

  I found what RAM modules are compatible with your device:
  256 MB (PA3311U - 1 M 25)
  512 MB (PA3312U - 1 M 51)
  1024MB (PA3313U-1M1G)

  All modules of this are tested with your laptop model and they should work fine.

  Good bye