HP designjet 800ps eprint and sharing - banding issue

Similar Questions

• Cannot uninstall HP ePrint and sharing

  When uninstalling HP ePrint and part, I get an error message on a registerkey that does not exist.

  Received email from HP support with instructions and problem solved!

• Designjet 800PS 21:10 then 86:01 - band coding?

  Hi everyone-

  I have a Designjet 800PS 42 ". After running is not for a week, he threw a 21:10 error. I have removed the right side of the machine, extract the gas station and he cleaned. He was in BAD condition and was about to sink to the ground.

  TIP: WEAR GLOVES. I don't have.

  During this process, I put at the beginning of the station back in incorrectly then the error remained. I then cleaned the rest of the machine, including the holes of the dust and the MICR band. Later, I realized my mistake, put it in correctly and the 21:10 error disappeared.

  Now I have a new error 86:01 that makes obstruction of paper.

  This is the process:

  1. in initialization: this is the position of the gas station. http://S17.PostImage.org/rklapk20f/image.jpg

  2. complete initialization: the chariot moves all the way to the left and right, then parks above the gas station (which moved in position). No errors. Message shows load paper. http://S17.PostImage.org/n19241k4v/image.jpg http://S17.PostImage.org/rymmp5m3z/image.jpg

  3. I load the paper and the cart moves to check. Paper rolls back and forth. etc. This is the image during this process that the carriage moves back to the gas station. http://S17.PostImage.org/uve936hbj/image.jpg

  4. transport moves slightly to the left and position, error 86:01. http://S17.PostImage.org/apar4alnz/image.jpg

  The belt is basically new. The trolley moves freely the length of the printer (by my measurement, see this video which shows what I consider that it is easy to get around - I'm using a finger on transport). Nothing seems to be it the way of the gas station. I think that it is free to move. Stem is lubricated. http://videobam.com/OGvAL

  I noticed that my band of coding is in poor condition. See this image. It is worn (exactly where the transport seems to stop). This may cause the issue? http://S17.PostImage.org/b3c33w5rj/image.jpg

  When I do a test of movement of transport, if I put myself to the test when the transport is parked above the gas station it moves slightly then stops. When I test in the Middle, it works perfectly.

  So my question is: is this likely to be the MICR band? Or have I given the station incorrectly (despite No 21:10 error)?

  THANKS IN ADVANCE!

  Replace the tape coding.

• Network and sharing Center will not be open in the Panel

  I've been away from home - where I HSI and it works very well - for a few months, I plugged to the network sporadically awireless (sometimes just bad signal), with a lot of frustration.  A few days ago, I went to a place where I could connect to a hard (secure) wireless network and enjoyed the smooth navigation for about an hour.  Later when I tried to connect to the smaller network, unsecure, I couldn't open my network and sharing Center. Whether from the drawer or the Control Panel, a screen opens displaying nothing, but the circle of rotation.  The TASK MANAGER IS REQUIRED to CLOSE THE PAGE - it will not answer the close box. TM shows the centre network and sharing as 'running', although there is no indication on the screen, except the title and the circle of rotation.

  My laptop is a dv6t Pavilion with Windows 7 (64-bit)

  All the other files in the Panel seem to open and operate normally.

  Hello Hamanslayer

  Thanks for posting on the HP Forums!

  I understand the network and sharing Center will not be open. I will do my best to help you! If please launch and center network and sharing, and wait for him so that he can provide an error. In addition, please try to run Centre network and sharing in a different user account. If you don't have one, create one.

  I did some research on this issue. Unfortunately, the only reliable troubleshooting that is remaining, if the above does not help, is to reinstall the operating system. Too, there are different issues that could be causing it. Reinstalling the operating system will focus on each of them.

  First, please save all the files you need. You can find specific steps on how to proceed in the following HP document: backup of files (Windows 7)

  Once this is done, you can safely reinstall the operating system. I'll also give you a document on how to do it: perform a recovery of the system (Windows 7) HP

  Please let me know your results. Thanks again for the display on the HP Forums. Have a great day!

  Mario

• Center network and sharing Center shows "Page failed to load".

  On Windows Vista, Network and Sharing Center comes with a blank page except for text in the middle and says 'The Page impossible to load' steps, I tried:

  Clean boot

  SFC/scannow

  CHKDSK /r

  System Restore (has not only once other succeeded, but does not solve the problem)

  None of them have worked. I have reviewed the SFC newspaper and looked at DLL files, it says could not be fixed and replaced those with well known copies.

  A clean install is not a good option in this case either. My thoughts are that it is a corrupt DLL somewhere or a DLL that has incorrect permissions.

  On another note, I can't connect to wireless networks either. To be more exact, no networks appear in the list (I can connect by typing the SSID manually. The pop-up icon wireless in the status bar indicates "networks are available", but the list shows no. I believe that these two issues are related. Please give suggestions and connents, I appreciate all help.

  Thank you.

  Hello
   
  Do you remember any change to your computer before the problem?
   
  Search for related errors and Event Viewer .

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  You can uninstall the drivers for the network adapters in the Device Manager and reinstall the same.

  To uninstall the wireless device manager,

  1. click on Start , type Device Manager in the start search box and press ENTER.

  2 locate the network adapters and expand the same.

  3. Select the adapter, right click and selectUninstall.

  4 restart the computer, if prompted.

  Pilots should settle automatically after the computer restarts.

  Note: Before uninstalling the drivers from Device Manager, make sure that you have a backup installation files.

  Step 2:

  A. If not help, to create a new user account and check if the problem persists.

  B. Si the problem is resolved in a new user profile, then probably you had a corrupted profile and can be remedied .

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Dell XPS 13 WiFi and internal speaker issue

  I had problems with 2 numbers, the WiFi and the speakers. Problems with these two areas come and go, but it's frustrating that I bought this laptop a few weeks ago!

  (1) WiFi

  I had problems with the laptop which the WiFi would disconnect after using it for some time, usually around one hour. The wifi icon would show as little access without internet access and turn off/on, airplane mode and all of the other methods described on these forums would not allow the laptop to connect or find my wifi network. Restart the computer would solve this problem. It's really frustrating so I exchanged for a new one on the Microsoft Store.

  With the new laptop exchanged, would pose the same exact wifi problems. Each device is connected to the network was not having connectivity problems and my router was working fine, every time the laptops first and second had problems of wifi. I then called Dell Support and I was instructed to install the drivers wifi and bluetooth on the Dell site, but the same problems with wifi can't access to internet limited/no and don't see the network would occur again in sleep mode-use it for awhile. I found a thread in which someone unchecked the box that says something in the sense of 'to disable the device _ to save energy' which I guess was a feature related to the wireless adapter. This seemed to fix the problem for about 2 weeks up until a few days ago when the problem would be reactivated.

  The wifi icon would go into the State limited with a legend no internet access and the tips airplane mode and turn off/on would not do anything. Enter the network and sharing Center once I disabled the adapter, I would try to right click and enable again, but the icon would stay as disabled little matter how many times I clicked on activate. Restarting the computer is the only way that the laptop seems to find the network. Everything is updated from this post.

  (2) speakers

  The second issue is the speakers. Everything works well except for the few times I used Cortana. When I click on the microphone icon to talk and Cortana talks back, there is a buzz as well as voice. Similarly, sometimes TI Cortana would say that it does not work and try again later.

  These questions are really frustrating (especially WiFi problems) and I really need help with these problems as Dell technicians to offshore I have met are very rigid and robot-like and they don't seem too useful otherwise than on the fundamental issues. I love this computer but if these problems keep occurring, according to me, it's better to return just as it is still within the 30 day period.

  I think I have solved the problem, finally using the solution proposed for downgrading to the driver 6.x (before it was disconnecting every few seconds, and now he held a super weak signal for awhile without turning off once).

  Ironically, I found the Broadcom driver available on the Lenovo site (it has been removed from the Dell site according to my previous post!) - here is a link for all tent play technician on behalf of Dell:

  support.Lenovo.com/.../ds103679

• When I create an ad hoc network on my laptop HP using Win7, I find in the 'manage wireless networks' (in the network and sharing Center)

  Hello, when I create an ad hoc network on my laptop HP using Win7,

  I can't find it in the 'manage wireless networks' (in the network and sharing Center)
  can you help me please?

  Hello

  In case there are problems with your computer or it network devices check
  with HP, their documentation online support and drivers, diagnostics, and
  Ask problems known in their forums.

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  ==========================================

  The routers are much easier and they don't cost much.

  These should help:

  References to Vista also apply to Windows 7.

  Set up a computer-to-computer (ad hoc) network
  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad hoc networking - how the network with the funny name can make your life easier
  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

  How to build a wireless network without using a router at wide band (also Windows 7)
  http://www.hardwaresecrets.com/article/how-to-build-a-wireless-network-without-using-a-broadband-router/418

  Build a Wireless Home network without a router (also Windows 7)
  http://www.labnol.org/software/wireless-network-without-router/11494/

  How to share files and printers on your network
  http://www.hardwaresecrets.com/article/how-to-share-folders-and-printers-on-your-network/247

  -------------------------------------------------------------------------

  Other solutions include the use of these that turn your WiFi PC into a virtual router
  instead of using the ad hoc network.

  Connectify
  http://www.Connectify.me/

  Virtual router
  http://virtualrouter.codeplex.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Virtual WiFi not presentation, it disappears from the network and sharing Center.

  Original title: Virtual WiFi not presentation

  Hello

  I created Virtual Wi Fi cmd (netsh wlan), first it was created and posted his icon in the network and sharing Center, after that show how I disabled it from the network and sharing Center by clicking on the icon and pressing the button disable I pressed off it disappear from the network and sharing Center.

  Can someone help how to activate it so that I see her back icon in network and sharing Center.

  Thank you

  Hello

  You have virtual map of Wi - Fi enabled in Device Manager?

  This problem may occur if network settings are changed.

  You try to run the following command check if it helps.

  a. press on the key Windows + X.

  b. click on (Admin) command prompt.

  c. type the command netsh wlan start hostednetwork and press on Enter.

  If the problem persists, I recommend posting your query in the TechNet Forums to get help:

  8.1 Windows networking forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Designjet 800PS-Windows 7 64-Bit Drivers not found

  When I navigate to support HP.COM & drivers for 64-bit Windows 7 for a Designjet 800PS printer drivers, he encounters an error and not going anywhere.  I tried this on multiple machines with the same result.   It does this for 32-bit and 64-bit.

  Everything indicates that the driver exists?  It seems he's trying to FTP?

  Any suggestions?

  FTP://ftp.HP.com/pub/softlib/software11/COL25756/pl-66260-3/hpdj510wx64glen.exe

  Problem solved.  HP links are all here.  Has proved to be a problem with the FTP through a firewall and not getting not translated correctly.   Why it only affected specific FTP links, I'm not sure.  But that's what it was.  Thanks for your help.

• Help on upgrading 10.7.5 El captain in MS Office and other possible issues

  Hello!

  I have a Mac Book Pro December 2011, OS X 10.7.5. I struggled with the implementation of php and many other issues and have been repeatedly invited to improve my OS. As a newbie in CS, I frankly scared - it's the only computer I have, and I can't lose/break/brick/etc, because I won't be able to fix any serious problem at the moment, not until I know what's best. But I'm really tired of losing time because of low productivity, constant freezing and other issues; and also feel ashamed bothers people on forums like this one, only because I have an obsolete system and lack of appropriate knowledge (the latest is not shameful because I learn, but the first can be really annoying for people who help me).

  Please, help me with this question:

  (1) is it safe to upgrade directly to el Captain 10.7.5?

  (2) If Yes on first, what are the possible problems that may arise and what should I do to avoid problems?

  (3) should I reinstall MS Office to upgrade the OS? This is crucial for me because I found out that I have to buy new MS Office, as Microsoft staff informed me. This isn't really the best money for me at the moment.

  Thank you very much for your help and your understanding!

  -First clone your boot existing to another disk drive.

  http://nyacomputing.com/how-to-create-a-bootable-clone-of-your-Mac-hard-drive/

  -Consult the developer of your applications if they will work with El Capitan.  Some may require updates and some may simply not work, and you must buy an upgrade. A MS Office for Mac license will be valid when upgrading to El Capitan, if the version you have is compatible with El Capitan.

  -In EL Capitan Apple strengthened for some hardware will require drivers drivers updated signature. For some hardware updated drivers are not available.

• Communication between HP eprint and Google Cloud Print

  Hello

  communication between HP eprint and Google Cloud Print seems to be broken. At least for me.

  Documents to print when I print vio Chrome browser or Cloud Print dashboard - but the State in the clouds print remains "submitted". It seems that somehow the HP eprint status doen't get referred to cloud print. In HP eprintcenter paper says "printed".

  Well, I wonder who will take care of this problem...  (Hope this does not lead to fingerpointing only...)

  Thanks for your support!

  Best,

  George

  Started more work, a few weeks ago. All is well now. Don't know who that sets well.

• My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

  My iCloud and shared calendars has stopped working in MS Outlook today.  They worked yesterday.  Now, I get the error message "cannot open this series of records.  The information store cannot be opened?  I tried the fix standard support.

  Same thing here.  Looks like Windows did an automatic update during the night, and now nothing iCloud associated work (calendars, contacts, etc.)

  I also noticed that the error message: "could not load file or Assembly ' MOM." Implementation ' or one of its dependencies.  The system cannot find the specified file. "It started after restarting the Windows Update as well.  I imagine that the two are related in the same problem to iCloud.

• problem connecting to TCP variables and shared help

  Hello

  I have a project (host and a device in real time) using variable static as well as TCP to send images over the network. I am familiar with the use of TCP in labview but never used TCP and shared variables in the same project before.

  I receive the error 63 off the open TCP connection. This only happens if an executable file is trained and deployed on the device in real time.

  Is there something to watch if the use shared variables and TCP?

  Thank you

  JChec

  Thank you Nate

  Fiddled a bit and found that the TCP worked great if I deployed from another computer. Thanks for the links, they were good reads

  JChec

• Memory dedicated and shared on the W700?

  Title says it all... Graphic how dedicated and shared w700 with i5 and hd 4000 there?

  Thanks in advance

  The W700 features 128 MB of memory dedicated video, with about 1 632 MB of shared system ram.

• Can't see installed and shared printer

  I can't see my hp printer installed and shared on a new Lenovo A58e ThinkVantage Desktop PC with windows XP from ThinkPad running windows XP.

  I have set up working groups as well, appropriate manually and by the network installation wizard.

  I have a checked and made sure that the file and printer sharing are enabled in the network adapter properties page.

  I checked in the Toolbox of Lenovo and it says that the file and printer sharing is enabled, so the printer is shared also.

  I also disabled McAfee firewall and Windows Firewall.

  NOTE: I met a similar problem before with ThinkPad Laptops, when the file and printer sharing would not stay active in the properties of the device, found the problem being to think software, specific to 'Think access', the software kept turning off files and printers, sharing, so I allowed him by the profile of the software Manager, and all laptops could see file sharing and printer.  However I don't see any 'Think access' software, just the 'Lenovo' Toolbox

  Thanks for your time, everyone.

  go to the network properties and install the IPX/XPS/Net bios strictly only for printer sharing network card only.