HP Designjet 815MFP

Similar Questions

• Designjet 4200: Designjet 4200 drivers scanner large format

  I have a designjet 815mfp which has a designjet 4200 scanner. The scaners computer died and I am tring to use a new computer, but I can't find the drivers for the scanner. I found the CD - software scanning HP Designjet - Q1279-61001, but when I go to order it, my credit card will not cross. I tried several times this month with different cards. Is it possible to buy or download the drivers for this scanner?

  Link to the cd:

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=298994 & swLangOid = 8 & swEnvOid = 228

  e-mail address mailing & I send you a copy.

  XP driver & scanner software.   does not work with win7...

• Designjet T120: HP T120 error BA7F11E0 designjet

  We have a HP designjet T120 when power on/off, this (BA7F11E0) error message appears on the screen immediately.  No movement of transport or initialization is performed. Just the error and nothing else. Pls help.

  Thank you

  Hello

  Try to isolate the printer, remove the printhead, inks, connectivity cables and turn on the printer.

  If the error persists, it may be a problem with the APC hand.

  Best regards

  Mike G

• DesignJet 130nr: canvas print Designjet 130NR

  Print on canvas of sheet (13 x 19) on Designjet 130NR works very well. Called HP Support asking if there are 24 "canvas rolls that work. Told me and it makes sense, the tool can not handle the Cup fabric.

  Someone at - he found and printed successfully pre-cut large canvases for the 130NR? I've got a good big letter opener, but as anyone who uses the 130 know, it rejects easily paper cut perfectly.

  Thank you

  Marty

  Hello

  Strawberry is not really designed to cut the canvas. Is too thick

  You can still use it, but you will need to replace it more often.

  If your knife used to work, you may need to replace it now

  Here is the part number Q1292-60064 Media knife

• Designjet t125: designjet t125 blue screen error B332347C

  Hello.

  I was ask to get this error:

  When you feed the plotter that blue screen appears with this code: B332347C

  I can't find the service manual for this, if anyone can help me?

  HELO try this solution
  You need to replace hp designjet encrypted t520 chip on the motherboard inside the plotter
  You can buy it on ebay http://www.ebay.co.uk/itm/HP-Designjet-T520-Blue-Screen-Error-Solution-Encrypted-chip/282223353841

• Designjet t520: designjet t520 error b3d73738

  HP Designjet T520 36 inches gives b3d73738 on the screen, never seen that before and isn't anythong on this subject,

  the printer does not start or let me take any operation

  need urgent hepl on this issue.

  Thank you

  Hello

  Try the following

  -Replace the power cable

  -Connect the printer to a different outlet

  -Isolate the printer, remove the ink cartridges, print head, cable connectivity

  If you still have problems, you may need to replace the APC's hand

• Designjet T520 36 inches (CQ893): Designjet T520 36 - in

  My tracer: HP designjet T520 36 inches (CQ893) start.

  The screen is blue, B87E7114 error code

  Turn off and turn on probably. Power button 15 seconds and powering button 50 seconds also.

  If push yellow power light. power on no beep error.

  End of warranty: 2015.02

  What is my error code?

  Thank you

  Sorry, but your post is very confusing.  You've got an ok error code, after that I do not understand what you mean by switch / stop and seconds.  First thing you need to do is to unplug the plotter of the power source.  Wait about 30 seconds and plug back in and if the power does not turn on by itself, use the power button to turn it on and tell us what appears on the screen.

• HP Designjet T1300 error 08:04

  Hello!

  I have a T1300 Designjet, a few years old (2010 I think) and I have printed a few rolls of paper on it. (5-6)? There are a few firmware updates he has begun to show 08:04 error message. He asked me to update the firmware, if the problem persists (does it well). I have the new firmware (?) IG_04_00_05.2.

  Sometimes I have to reboot 10 to 15 times before I can print. Sometimes it goes to error if I don't use pace for an hour or two. Sometimes he goes to error in the middle of printing, or just by turning or when ever. Sometimes it starts immediately and I can print all day with no problems.

  Any ideas?

  Now, I checked again for the new firmware. the printer says there is new firmware, but he went to 08:04 error mode in the audit.

  Now after 4 restarts, the printer started to install the new firmware. at the end of the installation program stops and when restarting, the printer starts at 08:04 mode.

  Restart the printer again and again. Allways 08:04 code. What is 08:04 code means?

  OK... updates history:

  Today first MS_01_01_23.1 was installed and after this IG_04_00_05.2.

  No newer firmware available.

  I will update this if it doesn´t enter the error mode more...

  Today, I finally had the time to print again. The T1300 always happening in error mode 08:04.

  Help!

  I've never seen an INVERTER causes a hardware failure, but I saw them will interrupt power.  I unplug it and try it this way for a test.   Can you connect a computer directly to the printer without going through your network and see if it starts and prints normally then?

• DesignJet T2530: T2530 selection automatic Roll Correct

  We recently bought a DesignJet T2530 to replace our old Gestetner requiring parts that are no longer available. We've had for about a month now and we had questions make him print the good roll all the time. We have a wide roll 36 '' loaded roll of 1 and a 30 "wide roll to roll 2. When printing the drawings AutoCAD or a PDF Adobe, 24 "x 36" designs would be to print in portrait mode (24"wide) to 30' wide roll instead of landscape (36" wide) to 36"wide roll." Also, 30 "x 42" designs would be automatic selection of portrait print (30' wide) for the 36"wide roll instead of 30" roll. " We called our service contract provider and they came out, looked through a bunch of settings and finish the download complete driver with PS drivers and HPGL2, set a custom. PC3 for AutoCAD file to force the printer to print 24 "x 36" designs on the 36' roll after we say from the printer, and everything has worked for a few days. " Service came out again, changed a few extra settings in the printer properties, ended up needing to replace the touch screen because it was just bad out of the box, and again once it worked fine for a few days. More recently this week, it started printing the 30 designs "x 42" 42"wide on the 36" "roll, cut 3" on each side of the drawing. " Service came out yesterday again, was here for about an hour, has insisted that it is absolutely not the machine and it must be a problem with AutoCAD and Adobe (which seems strange since it has the same problems of each program), tried a reset of the printer without result and basically said it's just not to the automatic selection the right to ride , so we will have to change the settings in the properties of each time that we print something. Then, after the left, custom. PC3 file, put it in place before (as previously mentioned) has stopped working properly and the 24 "x 36" drawings started printing out on the 30' wide roll again. " As it is now, when I print a drawing, I have to go into the properties of the printer in the print window, select the correct size paper, select the correct role and select the correct orientation so that it can print correctly. I put just customized. The PC3 in AutoCAD files for it so I do not always go through this when printing from AutoCAD, but I must still manually change all these settings for each picture I print from Adobe and I don't know if these custom. PC3 settings will decide to stop working again like last time.

  Someone else has had this problem on this model printer and, if so, have you found a solution so he can get the correct width for automatic selection?

  Hello

  Go to the printer Embedded Web Server and select the option use the exact width of the roll.

  Also, make sure that the drawing was generated landscape as the application will replace all the settings on the driver and the printer.

• HP designjet T790

  hp designjet t790 22.0.10 error code pls help...

  This code is important when someone replaces the star engine and when reinstalling the electronic module that they mix the large 2 connectors on the main map.

• DesignJet 200 C3180A: Lost printer driver-DesignJet 200

  I seem to have lost the driver for my DesignJet 200 C3180A antique during the upgrade of Windows 10. It worked two months ago (on Windows 7), and the only change I made to the computer - I think - is the upgrade. Now when I go on the list of printers it just isn't there. I tried to search the Internet but nothing seems available after Vista. I'm at a loss as to how I had it works on Win 7 now! Any ideas where a Windows 10 driver is not found?

  I connected via a parallel adapter / USB and the port was virtual USB001 (or was it 002?) and he has worked in the past connected like that.

  Any help would be appreciated, thanks.

  Hello

  Try this other driver for the DJ 430

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=11203514 & swLangOid = 8 & swEnvOid = 2100

  Hope to work

• Designjet 500 proposed purple colors AutoCAD printing gray

  We used the Designjet for years and have several colors put in place to print gray and projected (252, 253, 254 and 25).  They have recently started with purple print.  I have run all diagnostics and calibrations and alignments available, and they are all good.  I looked at several troubleshooting sites and had no luck.  I use AutoCAD v 13.

  Assuming that the print heads are out of all the colors correctly, try this:

  The printer HP Designjet 500 and 800 series printers have a fix that was implemented in the version of firmware A.02.08 and higher. This hotfix provides additional media profiles that prevent blue to mauve color output change. This fix is only applicable to the series 500 and 800 and only if the printer has a version of firmware of A.02.08 or higher. Once the firmware has been upgraded, follow the steps below to make the appropriate changes in the Panel menu front printers:
  
  1.
  
  Highlight the menu paper icon on the display on the front panel of the printer and press ENTER.
  2.
  
  Scroll to the paper type and press ENTER.
  3.
  
  Highlight Enhanced colors and press ENTER.
  4.
  
  Select the type of paper there and then press ENTER.
  5.
  
  Press the Menu key to return to the normal display of front panel

• Designjet 800PS 21:10 then 86:01 - band coding?

  Hi everyone-

  I have a Designjet 800PS 42 ". After running is not for a week, he threw a 21:10 error. I have removed the right side of the machine, extract the gas station and he cleaned. He was in BAD condition and was about to sink to the ground.

  TIP: WEAR GLOVES. I don't have.

  During this process, I put at the beginning of the station back in incorrectly then the error remained. I then cleaned the rest of the machine, including the holes of the dust and the MICR band. Later, I realized my mistake, put it in correctly and the 21:10 error disappeared.

  Now I have a new error 86:01 that makes obstruction of paper.

  This is the process:

  1. in initialization: this is the position of the gas station. http://S17.PostImage.org/rklapk20f/image.jpg

  2. complete initialization: the chariot moves all the way to the left and right, then parks above the gas station (which moved in position). No errors. Message shows load paper. http://S17.PostImage.org/n19241k4v/image.jpg http://S17.PostImage.org/rymmp5m3z/image.jpg

  3. I load the paper and the cart moves to check. Paper rolls back and forth. etc. This is the image during this process that the carriage moves back to the gas station. http://S17.PostImage.org/uve936hbj/image.jpg

  4. transport moves slightly to the left and position, error 86:01. http://S17.PostImage.org/apar4alnz/image.jpg

  The belt is basically new. The trolley moves freely the length of the printer (by my measurement, see this video which shows what I consider that it is easy to get around - I'm using a finger on transport). Nothing seems to be it the way of the gas station. I think that it is free to move. Stem is lubricated. http://videobam.com/OGvAL

  I noticed that my band of coding is in poor condition. See this image. It is worn (exactly where the transport seems to stop). This may cause the issue? http://S17.PostImage.org/b3c33w5rj/image.jpg

  When I do a test of movement of transport, if I put myself to the test when the transport is parked above the gas station it moves slightly then stops. When I test in the Middle, it works perfectly.

  So my question is: is this likely to be the MICR band? Or have I given the station incorrectly (despite No 21:10 error)?

  THANKS IN ADVANCE!

  Replace the tape coding.

• Designjet Z2600: Questions about head of ink and printer maintenance

  We have recently acquired a printer, Designjet Z2600 24 "large format.  A few questions so we can know what to expect:

  • Dry ink: A colleague suggested that dried ink can be a problem if the printer is not used frequently.  We plan on it using every two weeks, but there may be times when a month or two will pass between uses.  Is this a problem?
  • Print heads: will be the printer alert us when they need to be replaced or should we look for quality defects?
  • Management of ink: before printing, the printer will be well estimate ink necessary for work and alert us if we need to insert the new cartridges before employment passes by?

  Thank you!

  Hello

  The recommendation is to keep it at any time.

  If you use the printer turns off completely the power button.

  When not in use, it will go in standby mode, wake up maintenance and sleep.

• Designjet Z5400: unable to print pdf files correctly

  When I try to print PDFs the designjet, a lot of the graphics are usually omitted.  I usually choose my pdf file and save it as an image to print properly, but then the image is not as clear because of the size that is being printed.  I fell like I should be able to print PDFs without problem.  Any suggestions?

  Hello

  There are 2 options to correct the problem

  1 - flatten the image and then save it as a PDF

  2. in Adobe reader, go to file > print > advanced > select print as Image > print your file