HP Designjet T790 stuck at 94% initialization

Similar Questions

• DESIGNJET T2300 STUCK at 94% during initialization

  HI, my DESIGNJET T2300 STUCK at 94% during initialization. Anyone know what I can do to make it take off?

  Here's something that might work. Remove the loaded paper. Remove all the ink cartridges and print heads. Now, turn on the printer and see if it get to the place where it asks to install some of these supplies.

• HP designjet T790

  hp designjet t790 22.0.10 error code pls help...

  This code is important when someone replaces the star engine and when reinstalling the electronic module that they mix the large 2 connectors on the main map.

• My MFP HP Laserjet Pro M225dw stuck on HP «Initializ ing» logo

  I have a HP Laserjet the MFP Pro M225dw, less than a year. After having turned off for two months, he's stuck on the screen "Initializ ing" the HP logo.

  Can somone advise how to start?

  Greetings @LeeSRQ,

  Thank you access the Forums from HP Support for extra support! I see that the printer is locked during initialization after you have not used for two months. I will do my best to help you with this problem.

  Try a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  I suggest to try and update the firmware of the printer. It always needs to be updated even if the printer is in an error state: HP LaserJet Pro Series Firmware Update Utility. Just select your operating system.

  I'll send you the reset of the printer try in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos.
  Please let me know the results. Good day!

• Urgent: ODI stuck in the "initialize search engine."

  Hello
  
  We have installed in ODI 11.1.1.5 (Build ODI_11.1.1.5.0_GENERIC_110422.1001) on a PC.
  On this specific issue, I've seen a few similar posts, but those who remained unanswered!
  
  Here's the question:
  After the connection to the repository of the work, when I select an interface and open it, ODI asks if I want to block the interface. Wathever the answer (yes/no), then a small window 'initialize the search engine' is open and ODI's stuck in there. It's the
  
  The only way is to abort ODI with the Windows Task Manager!
  
  I hope my explanation is clear and there is a solution to re - install ODI on the pc.
  
  Thanks in advance,
  Olivier

  Try this...
  Open ODI, even before trying to open an interface, click on see-> find ODI Object.This will bring to the top of the window find an ODI object. Just close it, then you should be able to open again the interfaces...

• Designjet T790: Do not recognize paper roll

  I am trying to load a new roll of paper and all of a sudden my T790 does not recognize the paper roll and refuses to do anything when I slip the paper into the slot. Any suggestions?

  Hello

  It's really easy to replace the sensor on paper (OOPS).

  You can see under the printer.

  Here is a picture

  

  2 guess before replaing this sensor

  1 - Turn the printer orr, unplug the cable and plug it in again (follow the cable to the right and you will see a white plug), turn on the printer

  2 during the loading of the paper after paper triguer the paper sensor, keep inserting the paper until it reaches the drive roller. When you hear that beep is because the paper reached the OOPS, but not the drive roll, you keep feeding the paper.

  Best regards

  Mike G

• ESXi6.0 would be stuck at "Scheduler initialize" when starting.

  Hello

  I installed ESXi6.0 with license key.  When I start the machine, the ESX Server would be blocked to "initialize the Scheduler.  Y at - it suggestions on how to solve this problem?  Thanks for looking into this.

  concerning

  -Karen

  Have a look here: VMware KB: begin the ESXi host is unable to initialize the Scheduler

• HP designjet T790: hP FIRMWARE T70

  my printer got 79.2:04.Restart that the printer.if problem persists, call HP support.please help me solve this problem

  You don't have the last firmware update.  Click on the link below and download the latest firmware and load it into a USB.  Remove all the cables except the plotter, plug the USB key into the usb port on the plotter and turn on the plotter and follow the instructions.  Once the upgrade is made to see if it works when it is connected to the network cable.  If still no joy, get a crossovere cable and connect one end of the drawing board and the other end to one of your computers and see if you get the same error.  If you do not, there is something broadcast on your network that is causing the error.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5053931 & swItemId = pl_137012_4 & swEnvOid = 228 #.

• installation of creative cloud gets stuck on Installer initialization

  HELPPP!

  Thank you for the information.

  Let's try with own installation procedure.

  (1) open the c: drive and navigate to C:\Program Files (x 86) \Common Files\Adobe.

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  2) navigate to C:\Program Files (x 86) \Adobe.

  Open the Adobe folder and if necessary remove Adobe Creative Cloud folder.

  3) click on the link below and download Adobe Application manager and install the same:

  Once the installation is finished, it will create Adobe Application Manager shortcut icon on the desktop.

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager8.0_all.exe

  4)

  Important: Temporarily disable the AntiVirus and firewall.

  5)

  Double-click the Adobe Application Manager shortcut icon on the desktop.

  It will start the update process and is updated for Creative Cloud desktop application.

• Trainer new installation & hdd to t790 - serious problems

  I bought a Designjet t790 (very cheap) opportunity, and for some reason, the seller does not give me the trainer on board with the printer. Without the printer formatter showed error 08:11 - "no communication between the product and the touch control panel. So I studied a bit and bought a new Board of the trainer.

  I read somewhere that the hard drive is optional and not necessary for printing - it is false, no? Insert the trainer jury diskless hard gives error 08:11 even once, after been slain with '1% initializing' minutes. I had to buy a new hard drive with firmware - separately the parties have now cost more than the printer itself.

  With the new drive hard attached to the Council of the trainer, the initializattion Gets a little further, to 20 percent. Then I get a new error: 01.0:10 - 'Communication with engine APC failed.' If I leave it for a few minutes, error passes to 08:04 - touchscreen communication is lost.

  Now, I have to buy another part?

  Touch lights comes on after 6 seconds of market, but no matter what combination of keys does not seem to work. The touch of the screen seems to work as I can scroll the error screen.

  EDIT: Touch keys should work - when I press cancel, home and help at the start, the lights blink a few times as a confirmation. Nothing happens after that, it will similarly during initialization 20%, then 01.0:10 error.

  The power supply light is and remains lit, but the button itself does not seem work - the only way to stop this thing is with the main switch from 1/0 to the back, next to the power cable. When I turn the 1/0 button, the printer turns on instantly.

  Thanks for the help everyone! After fighting a few more months with this, I got a new card of mother and who sets the printer.

• LaserJet Pro m177fw loud rattling and then is blocked during initialization, will not print

  Hello

  This printer has delivered today, it looks awesome, but when I turn it on, it was a rattling noise (as something to try to turn it on, but do not attract a gear or something on the inside, this happens immediately to market, and then he's stuck in the initialization.  If I go to the home button and go to configuration, then reports and report configuration panel, I get a big green check mark.  I noticed that on the menu item straighter, there is a yellow warning, and it doesn't seem to be able to get details on the color ink levels.  I took the ink cartridge and looked at him and it looks like there is not something to activate the cartridge (it was in my very old HP Laser jet).

  What Miss me on the installer?  I read the instructions twice and also hard to put off the printer by pulling on the plug and wait a minute to plug it back in.  Same thing happens, thank you!

  Sean

  Well Yes, I found it, but then he touches, the printer goes just to 'initializing' to "xx_color_xx forward movement", well, nothing moves, it stays like this all night.

  So here's the answer.  After spending over 2 hours with tech support, they concluded that the faulty unit.  Unfortunately the HP support could only charge me $10 to replace, so I had to call the store (which oddly enough was also HP, which means that the display of the organizational structure of HP for me.)  ), I had to remind HPShopping.ca and get them to replace it.  I get a label shiping and will send it back and get a new one.

  Thanks to those that Chorus and helped.  Appreciate the efforts with the community forums!

• during initialization

  I have printer HP laser jet MFP M127 fw, running with Windows 7 Edition home premium. When the printer starts, it often to keep the initialization and stuck to the initialization and never return to the main screen until I have to turn off and on the printer. Please help me solve this problem. Thank you

  Hi the hptn,

  Thank you for the information.

  It excludes many of the issues were able to be . What is good.

  On this basis, it is more than probably a small problem with power/firmware.

  #1 here is to make sure that the printer is connected directly to a wall outlet. (He built in the surge protector).

  After that you will need a USB cable, I want to update the printers Firmware. (It's just safer to do it with a USB cable).
  This link will guide you through the update: get the latest Firmware and product updates.
  * Note * make sure that the printer is not in the initialization state when you do this so far.

  Finally, I sent you a private message with a last step to do.

  Please let me know how everything goes, and I thank you for the answer.

• Unexpected initialization bug

  In some ways, I had an inexplicable bug. I don't remember changing anything but some how something was wrong, and now when I try to run my application it does not start, it is stuck on the initialization process.

  Do you have any idea what it can be?

  This occurs if you have "infinite invalidation" If in the updateDisplayList of some components, it defines a property that causes invalidateProperties or call invalidateSize, the PPP will never complete the validation and appear.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• SMART hard disk attributes failed and writing error reading disk

  Hello

  I bought the HP touchsmart tm2 - 2150ca in 2010. So far, everything was fine until last week, the laptop fell and the computer is not able to start. Disk-read write error is popping up. Tried to get the diagnosis of HDD makes nothing happens, is stuck in the initialization screen. Bought a new HDD for it than this one will. Only problem is I have donot have recovery discs. Is there a way I can get it? What is the procedure to get the made disk partition and install the system, hp, etc. in a different partition tools.

  Thanks in advance,

  Hello

  You are welcome.

  First of all, about the recovery Partition, it is never established if you use a set of recovery discs HP to provide a way conveient to reinstall an OEM of Windows version - however this is not really necessary if you're creating a 'detail' to perform the installation, you can always reinstall using this option if the need arises.

  As you will be perfoming the Setup from a retail windows installation disc, this will give you the option to create a partition (use the Option on the Setup screen).  Unless you have a particular need to create customized partitions, you can leave Windows Installer for the "unallocated space" - this will automatically create a "System Partition" which is hidden and the main partition of Windows C.

  HP_TOOLS (E) partition will be created automatically by installing the UEFI diagnostic software.

  Kind regards

  DP - K

• UCS FC Port Channel questions

  Hi all

  I tried to connect the FI FC port to the Nexus 5 K. YEW has been configured in host end (VAN) mode, while the N5K has been configured as NPIV switch (NPV core).

  After trying many things, the SAN PortChannel link on both FI and N5K cannot grew up, stuck in the initializing state.

  If the N5K and FI was not grouped in PortChannel, connection set successfully.

  In addition, I found and who issues the FI when running in NPV mode, the trunk cannot be configured as trunk mode on (if configured, so the connection will get stuck in the initialization of State too).

  Attached are the files of configuration on FI and N5K

  Also, I tried to connect the FI to MDS 9222I and had the same problems that connect to N5K.

  Can anyone help?

  Comparation while I connect the Nexus 5 K as NPV switch and MDS 9211i as mode NPIV, the PortChannel SAN and circuits (N5K as TNP) and MDS TF was successfully raise.

  Thank you

  GOFI

  Gofi Hello,

  As interface comes from the individual links and N5K running version 5.1 (3) N1 (1), he may run into the following faults

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty04686

  If so, N5K software must be upgraded to a version that has the fix for this flaw.

  HTH

  Padma