HP designjet T790: hP FIRMWARE T70

Similar Questions

• HP designjet T790

  hp designjet t790 22.0.10 error code pls help...

  This code is important when someone replaces the star engine and when reinstalling the electronic module that they mix the large 2 connectors on the main map.

• HP Designjet T790 stuck at 94% initialization

  Hi have a HP Designjet T790 that is stuck on 94% during initialization and making a rattling noise. Before this past that the printer has had a problem with the wobbly lines and incorrect colors. I realized maybe it's an isue of printhead. -What items that could cause this problem?

  I saw the problem of 94% and it can be many things. Best thing to do is to remove the paper, remove the printheads and ink cartridge. Start of the printer and see if it comes to where is demand now to the point of first ink and paper.

• Designjet T2300 product CN728A: could not install Designjet T2300 mfp firmware

  Hello.

  I tried to upgrade the firmware to the Designjet T2300 MFP (CN728A).

  I tried with: network, usb, thumb stick.

  It does not at all.

  The current firmware is: IG_02_00_15.1 and I want ot update at: IG_09_00_00.4

  Should I update to the previous firmware: IG_06_00_00.2, first?

  Yes, try the update to firmware IG_06 first before the update of the firmware IG_09.

• Designjet T790: Do not recognize paper roll

  I am trying to load a new roll of paper and all of a sudden my T790 does not recognize the paper roll and refuses to do anything when I slip the paper into the slot. Any suggestions?

  Hello

  It's really easy to replace the sensor on paper (OOPS).

  You can see under the printer.

  Here is a picture

  

  2 guess before replaing this sensor

  1 - Turn the printer orr, unplug the cable and plug it in again (follow the cable to the right and you will see a white plug), turn on the printer

  2 during the loading of the paper after paper triguer the paper sensor, keep inserting the paper until it reaches the drive roller. When you hear that beep is because the paper reached the OOPS, but not the drive roll, you keep feeding the paper.

  Best regards

  Mike G

• Trainer new installation & hdd to t790 - serious problems

  I bought a Designjet t790 (very cheap) opportunity, and for some reason, the seller does not give me the trainer on board with the printer. Without the printer formatter showed error 08:11 - "no communication between the product and the touch control panel. So I studied a bit and bought a new Board of the trainer.

  I read somewhere that the hard drive is optional and not necessary for printing - it is false, no? Insert the trainer jury diskless hard gives error 08:11 even once, after been slain with '1% initializing' minutes. I had to buy a new hard drive with firmware - separately the parties have now cost more than the printer itself.

  With the new drive hard attached to the Council of the trainer, the initializattion Gets a little further, to 20 percent. Then I get a new error: 01.0:10 - 'Communication with engine APC failed.' If I leave it for a few minutes, error passes to 08:04 - touchscreen communication is lost.

  Now, I have to buy another part?

  Touch lights comes on after 6 seconds of market, but no matter what combination of keys does not seem to work. The touch of the screen seems to work as I can scroll the error screen.

  EDIT: Touch keys should work - when I press cancel, home and help at the start, the lights blink a few times as a confirmation. Nothing happens after that, it will similarly during initialization 20%, then 01.0:10 error.

  The power supply light is and remains lit, but the button itself does not seem work - the only way to stop this thing is with the main switch from 1/0 to the back, next to the power cable. When I turn the 1/0 button, the printer turns on instantly.

  Thanks for the help everyone! After fighting a few more months with this, I got a new card of mother and who sets the printer.

• DesignJet 5500: firmware update error

  The firmware on my printer is: S.03.12D

  I went to this URL:

  http://h20566.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=82219 & swLangOid = 8 & swEnvOid = 181

  and downloaded the firmware under Windows 2000, even if I have Windows 7 64 bit on my computer because I thought that the firmware was just download to the printer, so it should matter what OS is on the computer.

  I downloaded S.56.07 February 3, 2009

  I downloaded the firmware to the printer file and it improved up to 97% and then gave the error message below.

  An unexpected error has occurred. Make sure that the firmware you are using is a valid firmware file.

  I have a Designjet 5500 and I went from dye in ink UV, if that matters.

  The printer seems to be ok, but it would be good to know how I can upgrade the firmware.

  Yes, a connection between the computer and the printer is recommended.

  Version of the OS is not the problem here, but exact number of the product will make a difference, so please use the actual peripheral product number.

• DesignJet 1000 Plus Series: JetDirect 680n (wireless) & DesignJet 1000 Plus - what is the required minimum firmware revision?

  For JetDirect 680n (wireless) & more / 1055CM DesignJet 1050c more - what is the minimum required for a 1050c or 1055 CM firmware revision more? I guess that at least a minimum of a certain firmware revision is necessary. Thinking about doing a JD 680n wireless connection.

  I suppose that it would work with A.52.02 (PS or RTL) firmware revision but she would work with A.52.01 ch (1055 CM Plus) I have?  and A.02.10 RTL (1050c more) I have?

  Thank you.

  Version of the firmware should not matter.  See the link below for a list of compatible printers.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-bpj07274

• HP Designjet Z5200ps Photo p: FIRMWARE UPDATE not found for Designjet Z5200

  I can't go looking for a the firmeware update for my HP Designjet Z5200ps. When I plug the serial number of the product RL, he takes me to the page and I click on drivers, software and it says product not found.

  One of the suggestions?

  Who should I call to maintain this printer?

  Plase check the link below to downlod Desigjet Firmware

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6488192&swItemId=pl_91274_4&swEnvOid=4063

• Designjet 920F: 920e designjet firmware update

  I need to install an update of firmware for my Designjet 920F which is NOT on a network or on the cloud.

  I downloaded the new file on a single computer and loaded to the stand-alone computer.

  Now what?

  With the help of a USB key. Download the firmware from http://www.hp.com/go/T920/firmware , http://www.hp.com/go/T1500/firmware , http://www.hp.com/go/T2500/firmware , or http://www.hp.com/go/T3500/firmware file (depending on your printer model) into the USB flash drive and insert it into the USB Hi-Speed host port in the façade. A firmware update wizard appears on the front panel to guide you through the update process.

  Of course, if you have already downloaded a flash drive, you can omit that part.

• Need help updating the firmware on a Designjet T770 44 inches.

  Hello

  I just bought a 44 inch Designjet T770. I had some small problems of implementation as the inks were obsolete, and a print head needed replacing. They have been sorted and now it seems to work properly but always tells me that I need a firmware update.

  The printer is currently on version 2.0.0.0 of the firmware and whenever I try to print it displays a warning that tells me an update of the firmware is necessary, however when I followed the links to get the firmware it just says page not found.

  I tried the search site of HP and the net for the latest firmware with no luck.

  Can we please we indicate a link for the latest firmware or send an email.

  It would be greatly appreciated.

  Thank you.

  Please follow this link to download the firmware for your HP product:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3980524&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dpl_77611_8%257CswEnvOID%253D228%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Please check before upgrading the firmware: 1) operating systems, Installation Instructions) 2.

• The HP DesignJet T520 firmware update

  Hello

  I have a HP Designjet T520 and I'm trying to update the firmware on the printer.

  The printer is currently connected to our print through our network server

  The aim Guide do the following:

  Using the integrated Web server, select Firmware update

  Although, when I connect to the web server, I don't see the update of the Firmware.

  Can someone tell me where is this info?

  Thank you

  René

  Hi ReneMenard,

  The Designjet is a commercial product.  I you a link towards the Designjet forums try to repost your question here for better coverage.

  Designjet Forums

• 08:04 error message. Designjet T1300. After the update of the firmware. 47%

  Hello!

  I have a problem with my printer, DesignJet T1300. After the firmware update he began to complain of oblique paper, showing error 08:04 error message and ask to restart or to load the latest firmware. From time to time, he showed the message and sometimes it allows me to go further and the menu without any error. Now, it stops at 47% and doesn´t let me not to do anything.

  The printer is three years old and I printed 4 rolls of paper. How to load the original firmware? It doesn´t I would go in the menu with the previous firmware. (The last time I checked there is only firmware December 2013 and the new - neither one works)

  desperately yours.

  Kjell

  Hi bessam_thabet,

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/

  I hope this helps.

• Designjet Z3200PS Q6721B: Looking for old firmware for Designjet Z3200PS Q6721B?

  I've been fixing this mchine for over 2 months & never being able to finish since, even I already updated to the latest firmware, I have download from the HP Web site, I still don't have 79:04 after printer initialized 100% and never be able to load a roll of paper to make a print head alignment.

  Belt, service station, transport box, printheads, inks, tape Corder, all perfectly.

  But today I upgraded to the latest firmware again, once all 100% the machine firmware downloaded PC, then

  the reboot of the machine by itself. I stood beside and I saw after reboot & 1% apeared, then when he reached on

  60% & hour glass appeared & disappeared quickly, then bip & machine will restart. I tried again 2nd time and same.

  My other Z3200 44 "you always at 100% and why it only got to 60% & reboot by itself?

  I suspect the error 79:04 may associated with the unfinish firmware update?

  I'm looking for a link to download the old version to try...

  Thanks for your help.

  Finally I found what was wrong with error 79:04 of this printer when trying to load paper.

  Today I tried to delete the transport box & broke out in the center of the pulley, which has been the reaon when

  proposed per proposed transport and the belt box by unevenly and caused the error immediately.

  Happy another problem solved & fixed printer.

• Designjet T1100ps 44 inches: update Firmware to resolve the 81:03 error?

  We get errors 81:03 in the middle of several pages in PDF of print jobs.

  Our current version of the firmware is: TJ6 - TAJ6_6.0.0.4

  Does update the firmware? If Yes, where can I find the latest version for download?

  Any help is greatly appreciated.

  L

  81:03 is an error with your preliminary media.  You can try to restart the printer, power down at the back and unplug the power cord.  Well that off and unplugged hold the power button the front panel for 10 to 15 seconds.

  This can sometimes erase an error that is logged in motherboards will not erase.

  Looking for FW go to... HP.com-> Support tab-> enter your printer information.

  The T1100 is an obsolete printer, so HP has ceased to put the newer versions of FW and get parts through them will be difficult, because they no longer support this model of printer.

  I would recommend examines a new plotter, using a refund from HP for the T1100 should ago get a discount from nice on the new machine.

  I hope this helps.