HP Designjet Z6200: HP Designjet Z6200 Maintenance cartridge

Similar Questions

• DesignJet plotter: ink cartridges T610

  For the T610 ink cartridges can be used after the expiry date on the packaging or expired cartridges will damage the print or machine heads? Thank you.

  Mysef using inks expired for more than 12 years and never have a problem. I mainly photos, posters, giclée print

  print... Currently, I have DJ500, DJ800, Z2100, Z3100, Z3200...

  Use only inks from HP, even expired...

  never use these so-called remanufactured or refilled inks... but if you can print something not important or simple

  color... maybe ok...

• HP DesignJet Z6200 plotter ink error - ink appearing

  I print the cards on a large scale on a plotter HP Designjet Z6200 and ink blots are appearing on the side. While the tasks are not printing itself, it always indicates an error. In addition, on diagnostics test print only, some of them does not appear (it is not on any other impression here yet).

  

  

  Ink absorber?

  Clean print heads?

  Any ideas?

  Hello

  You have a bad printhead.

  If they are under warranty, call HP, share these photos and ask for replacements.

  If they are not in warranty, you can purchase them directly on any store reseller or HP.

  I will recommend you to stop printing until you replace the print heads, because you may damage the maintenance cartridge, the vacuum system, contaminating the milling table, etc., everything about contamination due to a leak of ink.

  I hope this helps

  Best regards

  Mike G

• T1300: error code 8,11 hp designjet T1300

  
  

  According to the maintenance manual, you need to replace your trainer and or aft of engine. If you google Designjet T1300 maintenance Guide, you can download and see how to interpret the lights and perform troubleshooting.

• HP DesignJet Z6100 60 inch - SYSTEM of INK NO LOAN

  After replacing the maintenance cartridge, ink SYSTEM NOT READY shows on the main screen. Replace the printhead and clean their cariage seats. Still nothing. Ideas or simple solutions.

  How is this going, it's resolved?

• CM1415fnw: Real vs compatible cartridges

  Hi people,

  I have a dilemma with this printer. It has been a great unit, I got from my employees when they closed an office. As it is just for consumption, he made only 20 000 pages. The print quality was nice, and we like to have a scanner available, so we were making good use of it.

  As you can imagine, he was running low on toner, so we brought a real set of toners @ $385 only 6 months later, they were weak again.

  We cannot afford to spend $770 per year on toner, so we opted for the cartridges "compatiable". 2 months later, the colors seem bad to align and erase each other.

  So we called a center of service that said they don't look if we have non-genuine cartridges in it.

  So, we either throw the printer and buy something else, or find us a way to use cheaper and maintenance cartridges it.

  The compatible cartridges are really so bad? If so, why people still sell? and everyone claims the warranty on them?

  HP printers can actually detects if your cartrdige/filled aid of counterfeiting. It may work sometimes, but must be changed whenever the printer detects fake and of course, conterfeits is the main cause of the printers print mechanism.

• cartridges and printheads for HP DesignJet Z6200

  Produce you cartridges and printheads for HP DesignJet Z6200 or they have been abandoned? I can't find date of production of cartridges year 2014 in stores

  No, it is still relatively a new machine. No, it's not supposed to wait, go, these are great printers, I have 2 years Z6100 6 older old and still great.

• printer large format

  We recently purchased a printer large format, the Z6600 and it came with a Cyan ink cartridge. I'm having a hard time finding a replacement of the cyan cartridge. I don't see Light Cyan for the purchase of supplies.

  Hello Advertisingblue,

  I referenced the user for the printer HP Designjet Z6600 Production guide and found the following list of cartridges:

  HP 773 has 775 ml black matte of Designjet cartridge C1Q21A ink

  HP 773 has 775 ml of ink Designjet Magenta cartridge C1Q23A

  HP 773 has 775 ml of ink Designjet yellow cartridge C1Q24A

  HP 773 has 775 ml of ink Designjet Cyan cartridge C1Q26A

  HP 773 has 775 ml Photo C1Q27A Designjet black ink cartridge

  HP 773 has 775 ml of ink Designjet gray cartridge C1Q28A

  For the cartridge Cyan (C1Q26A), I found the following reference to the command:

  http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=6670188&JumpID=reg_r1002_usen_c-002_title_r0001#! tab features =

  I hope this helps.

  Kind regards
  Lynn_B

• Looking for software IPF700.

  Hello, everyone, I'm new to this forum. I recently bought an IPF700 used off Craigslist for $175. There is no software or ink. I bought ink and a new maintenance cartridge, installed plain paper and viola, she came back to life. Printer-wise everything seems ok, no error message.

  I want to get a copy of the original software that came with the machine, including the art of the poster program. I don't want to pay hundreds of dollars for it. I looked around on the net without success. Any ideas or suggestions?

  Steve

  Hello.

  Available for the iPF700 downloads are on our Internet site at the following link:

  imagePROGRAF iPF700 drivers & downloads

  If additional information is required, find more help contact us.

• HP DesignJet Z6200 "Reinstall" heads - how do you do that?

  I saw a few methods that recommend "resettlement" of the troubleshooting print heads.

  

  Please explain or show an example of how to do this with a HP DesignJet Z6200.

  Hello

  All you have to do is remove the printhead, clean the electrical contacts of the print head and the transport.

  Here are instructions on how to remove and install the printheads

  Printer HP Designjet Z6200 series Photo - insert a print head

  http://www.YouTube.com/watch?v=uVVWswMABzk

  I hope this helps.

  Best regards

  Mike G

• Designjet Z6200: Z6200 - strange printing defect

  Hi all

  We have a failure happening on one of our printers Z6200.

  Remove us the media and test on other units and do not have this problem, so I guess that excludes media as the question.

  It's a paper coated with HW. We tried the profile for HW and Super HW.

  Please see the attached images.

  Does anyone have an idea how to fix?

  See you soon,.

  Roy

  

  

  Hi all

  Here's what it is.

  Apparently this started happening after a few strikes of transport.

  I checked the Scan axis and everything was fine, but if I ran the Scan axis with the media on the milling table you could here a noise from friction on the media.

  I removed the transport so I could see the bottom and he was there. Two 2 damaged printheads (Magenta / yellow) which were rubbing some along the media to create the default.

  Congratulations to all.

  Roy

• DesignJet z6200 - FILE FORMAT not supported

  Hello forum,.

  Our company just got a brand new z6200. When I try to send a job from my Mac desktop, it grubles a second, then says error 60:01 - unsupported file format. Tried to print documents, PDF, JPEG, PNG files word, always the same thing.

  Hooked to a laptop running windows 7 and it printed fine.  I updated the firm ware and installed the driver from the HP website.  I have a hooked so z3100 and there is no problem. I'm on Mac OS X 10.6.8

  Any suggestions on what to do? We need this printer to work from my Mac desktop. The customer service was ABSOLUTELY no help.

  Thank you!

  In order to print from a MAC, you need to purchase a kit of post script which then makes compatible MAC, its basic model that it will print through via web services or windows work stations. The post script kit usually is an upgrade of the chip or a software kit which is delivered on a usb key. If you go to the HP website and searching info for the Z6200 and optional upgrades/accessories can explain better. The lower end HP printers are purchased as a post script or not as vs T790ps T790. The higher end models are not separated from the printers, but to buy the kits to transform it into a model of post script.

• brand new designjet Z6200 60 "supposed to swing back? really?

  The guys from HP that has implemented said it is supposed to.

  ours looks pretty fussing, sways on a half inch, maybe more.

  guess it isn't much, but looks like a lot of movement in the supports (legs).

  is that what sounds all medium/normal?

  With the size and speed of this transport, this model will influence some.  There are screws under a decorative cover on the two ends of the support that can sway a lot worse if these screws are not tightened.  It seems to me that this is a normal operation you are familiar.

• Designjet Z2600: Questions about head of ink and printer maintenance

  We have recently acquired a printer, Designjet Z2600 24 "large format.  A few questions so we can know what to expect:

  • Dry ink: A colleague suggested that dried ink can be a problem if the printer is not used frequently.  We plan on it using every two weeks, but there may be times when a month or two will pass between uses.  Is this a problem?
  • Print heads: will be the printer alert us when they need to be replaced or should we look for quality defects?
  • Management of ink: before printing, the printer will be well estimate ink necessary for work and alert us if we need to insert the new cartridges before employment passes by?

  Thank you!

  Hello

  The recommendation is to keep it at any time.

  If you use the printer turns off completely the power button.

  When not in use, it will go in standby mode, wake up maintenance and sleep.

• Designjet 110Plus NR: HP Designjet 110 Plus NR Maintenance Utility does not detect printer

  Hello

  I have a Designjet 110 Plus NR printer that prints, but when you use the maintenance utility, it does not detect printer. I downloaded the latest version H.06.0 and am able to install it. but when the search for the printer it will not find it, and I have no way to pinpoint it too my printer. I have the printer connected to my computer via the USB port on a docking station HP residing in my laptop (Elitebook 800 G1 win 7 pro x 64). Also, it is connected via a parallel to the NIC dongle to make it available on the network for everyone to print too so. All can print, I can print but the Cyan is not always print and before you buy new print heads, I would like to clean and align with the Maintenance Utility. I tried to use the printer in the dock station, plugging directly into the laptop and the network to connect, but won't find printer. I tried the alignment of the front that I found in other forums, and it did not work. Whenever I went to the printer, I uninstalled all drivers and and the computer and rebooted system maintenance utilities. I installed the drivers from the HP website, from the disc initially supplied with the printer and our network, still no change print server. Am still able to print but not to run diagnostics or alignments. I've scoured the forums HP and all the "recommended" patches have never someone who in fact confirms the
  'Fix' worked. Can someone help with this problem? It has been about 4 days that I'm looking into this and frankly it's kinda ridicolous saw that it's a plug-and-play printer. Thanks in advance for any advice you may have!

  Well, the network adapter has failed. I managed to install the software, but he gave a generic IP address of the printer and gave me the same mistake of not being able to communicate with the printer. So, I pulled up an old laptop XP downloaded the drivers from the HP site, rebooted, printed the test page with success and installed the system maintenance utility. And WHOLA, I saw the printer immediately in the USB of Maintenance section and was able to run the diagnostic page and determine our problem. Thanks again for your help Mike!