HP deskjet 1300 works do not with vista

Similar Questions

• Audio & CD/DVD drive not working only not with Vista

  I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:

  1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
  2 > drive CD/DVD is not visible in 'my computer '.

  These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...

  I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3550002

  Any help to solve these problems is much appreciated... Thanks in advance

  Hey riri,.
   
  Try these steps and check the result.
  Step 1: Delete the invalid registry keys
  1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. in the navigation pane, find and then click the following registry subkey:
  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, click UpperFilters.
  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
  4. in the Edit menu, click on delete.
  5. When you are prompted to confirm the deletion, click Yes.
  6. in the right pane, click LowerFilters.
  Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
  7. on the Edit menu, click on delete.
  8. When you are prompted to confirm the deletion, click Yes.
  9. exit the registry editor.
  10. restart the computer.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in Windows
  Step 2: Uninstall any software CD/DVD burning.
  1. Click Start, type appwiz.cpl and press to enter.
  2. from the list of programs, select CD/DVD burning software and click on uninstall.
  3. once the uninstall, restart the computer.
   
  See Uninstall or change a program
  Step 3: Install device drivers in a new user account.
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on create a new account.
  
  4. type the name you want to assign to the user account, click an account type, and then click on create an account.
   
  See repair a profile user corrupted

  See also device in Windows Vista drivers

  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Age of Mythology Gold Edition works only not with Vista 64

  Ok. Same computer. Different operating systems it works very well. It is a problem of Vista 64. When I start Age of Mythology or Age of Mythology Titans he keeps asking the number of CD 1. This version came on a DVD. Even if the DVD is in the DVD player I am always asked the same question. What is going on? How should I do? Oh! The other operating system, I've tried is 32-bit Windows XP. Yes it is a 64-bit computer.

  For those who are interested,
  I tried all the proposals by Gloria. No worked. There is no update I can find on the Microsoft Web site. So! If you want to use your Windows XP games, you need to do. It is still possible to run the 32-bit of Windows XP on a 64 bit system. I created a system boot duel using Vista 64-bit and 32-bit of Windows XP. The system is set to boot Vista normally. You can select Windows XP 32 bit on startup when you want your 32-bit games. I was forced to do it with my MSTS as well. I have a control RailDriver. There can be no drivers 64 bit at the time of writing.
  The foregoing is shared so that others can benefit form, what has been done. By the way. Not all 32-bit games need this treatment.

• Cisco ASA 8.0.4 AnyConnect works do not with Vista and IE7

  Hello

  I currently have a Cisco ASA 5520 with the latest version of the Software ASA/AMPS/Anyconnect. However I can't get Vista and IE7 to connect using the free client anyconnect VPN error message following appears

  "Setup could not start the Cisco VPN Client".

  Is there a workaround for this.

  Thanks in advance

  Eoin

  I'm glad you got it working :)

  Please evaluate the positions if find you them useful.

  Concerning

  Farrukh

• Satellite A130: Fn key not working only not with Vista - only FlashCards

  Hello

  I've been looking around in the forums, but I couldn't find solutions to my problem.

  I have a satellite A130 and I am running a windows VISTA family Basic. I have a problem with my fn functions.
  I can only use flash on the top of my screen cards, just by dragging my mouse upwards on the top of my screen.

  The key works only when I start my computer, at startup, but when the computer is running, there is no other "fn", I could use but my mouse to show my flash cards and use them.

  Is there something else I could do?
  Thank you

  I have same situation, remove the starting windows for the form Flash cards and you have no pictures at the top of the desctop, but keys will work.

• Re: With DVI-d port PA3542E-2PRP Dynadock not working only not with Vista

  Hello

  I have a new laptop under Vista Home Premium.
  First thing I'm trying to install is the driver Toshiba Dynadock - new model of a PA3542E-2PRP (with DVI port).

  Immediately ythe driver is installed, an alert appears explaining that the color palette will be changed because of the incompatibility. In others, the laptop screen turns off completely (until I have remove the connection to the dynadock, when she returns to normal). I then install the updated driver from the site Web of Toshiba (proposed in previous thread by Eldorado 17 Jul 07). I have trouble to install it correctly, but when I do, it corrupts one of the laptop video cards.

  It have since then done a 'restoration' on the laptop, so am at square one. However, I am wanting to continue using the Dynadock if possible - of the very welcome suggestions please!

  Thanks in advance

  If I understand correctly, you were able to install the software on Vista Dynadock, but now the graphics driver installed doesn't work as it should I am mistaken?

  Well in your case I n t see no problem with Dynadock but driver you graph. Therefore, an update of the graphics card driver would be desirable

• Volume button doesn't work is not with Vista Business

  Everyone knows what software Toshiba should I install in order to use the volume button in Vista Business? I have a Qosmio G20-102. Thank you.

  Hello

  Are you could not change the level of sound volume under Vista?

  The problem is that only some unique Vista drivers have been released for Qosmio G20 and not all functions can be used.
  But don t give up Andrej! There is a hope! Thanks to all the forum users who post proposed solutions!

  I found this very long, but interesting and useful article about the installation of Vista on Qosmio G20.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20494

  The user FranciscoJr is a guru of the G20 Vista + Qosnio ;)

  A hint; some of the objects of Toshiba value added package for the G30 can be installed on the G20.
  Install only the selected items. Otherwise, you will have conflicts with the windows Mobility Center.

  Good luck

• XPS 1530 internal mic not working not not with Vista

  XPS 1530 internal mic not working not not with Vista

  Hello ThomasBarnette,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, it seems that you are having problems with the internal mic.  As I understand the internal microphone does not work.

  Download and install the drivers for the Chipset from the link below and check.

  http://www.Dell.com/support/drivers/us/en/04/product/XPS-M1530

  Answer to us if you are having problems with the internal MIC or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• iTunes 11.4 works do not with my new iPhone 6sPlus

  iTunes 11.4 works do not with my new iPhone 6sPlus.  Do I need a different version of iTunes?

  Yes, you will need a computer, iTunes 12.3.2.

• Re: Qosmio F30-131: remote control does not not with Vista Ultimate

  Hello!

  I just installed Vista Ultimate but my remote does not work.
  I reinstalled everything in the right order as written in the command file install on Toshiba Homepage but its always answers don't not under Vista.
  I can just turn on my laptop when its off the remote control.

  Anyone know what to do?

  (PS: I do not have my Toshiba restore CD for Windows XP MCE)

  Hello

  You reinstall the remote control manager? This utility enhances support for a remote control on your computer.
  How about Value Added package? There is a new version available. Try to update it too.

  But back to the basics, the Qosmio F30-131 belongs to the series of PQF30E. Did you choose the drivers for this series?

  However, this laptop has been delivered and pre-installed with Win MCE. Can this remote works only with the XP version of Windows Media Center.

• I have a problem with my canon cam works only not with the eos unility now

  OK I use to connect my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software and they say it's a problem with vista 64, do not leave the work of software he will work with the computer, but not the eos utility they told me to remove the key from the vid but donty know how

  Monday, January 31, 2011, 20:35:31 + 0000, tank5700 wrote:

  OK I use to plug my cam and it worked fine until the last update and now it has stopped working, I've been on with cannon and put to update the software, and they say it's a problem with vista 64, not to let the work of software it will work with your computer
  but not the eos utility they told me to remove the key from the vid but donty know how

  You ever need connect your device directly. Buy a card reader for
  the type of flash card your camera uses (they are cheap).
  Place the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is easier and does not use
  the camera battery. I have both these card readers - one I keep on
  my desk, close my desktop computer and another that I keep in my
  Bag for laptop to use when traveling.

  Ken Blake, Microsoft MVP

• Problems with HP4620 not working only not with the other computers in the House

  I bought a HP 4620 for my house and it works very well with my Vista laptop wireless.  However, it does not show as an option for our office or our second laptop.  Any ideas?

  Thanks, Sunny12

  Hello sunny

  I was going through your posts and help you've been putting online...

  Answered by Mr. Aneesh, pilots refers to the software that we are supposed to install in the computer.  Thus, these drivers are available on the CD that you have with your printer...

  Now, as you begin to install, you will get the screens user friendly and just follow the instructions and proceed with the installation.

  The system, that is to say; the monitor (computers) will ask you how you are going to connect the printer to the computer...

  Thus, there are 2 methods by which you can connect your printer to the computer...

  (1) USB - this is a cable that you find in the box the printer, but you would have to buy separately.  so, if you do not, please get one of the stores.

  (2) wireless - in this type of connectivity, you do not need the USB cable, because you would then have a device called a 'router '...  And here... It is the router that establishes the communication between the computer and the printer.

  Please try the following and if you get stuck, let us know.

  Kind regards

  Ashokkan.

  Help the community by marking this post.
  Your question has been answered? Mark it as an acceptable Solution.
  See a great post? Give it a Bravo!
  I work for HP

• iPads not working only not with the cache server

  Hello!

  We have implemented a Server Cache El Capitan... And the strange thing is that it works with macs and iPhones but not with iPads! Has anyone of you ever heard of something similar?

  Thanks in advance!

  Carl

  It works with macs and iPhones but not with iPads!

  There are many variables that affect how to find caching servers Apple devices.  Signed iPads on the same account iCloud like Macs and iPhones, or more precisely, are the accounts that iPads are signed in registered in the same country as the public IP address of the server being cached?  If your organization uses multiple public IP addresses, are the server cache and your DNS server set up correctly in what concerns these addresses?  Did you restart the iPads after implementation of the caching server, so that they immediately "forget" that they have found no update server caching and are forced to review?  (Restart devices - not the server!-is also recommended if you change the public address record in DNS.)  IPads use a different local subnet as other devices, maybe a caching server is not configured to serve?

  We can help you, but we need more information.

• HotSpot iOS 9.3.1 works do not with Cisco AnyConnect

  Does anyone else have this problem? Since the upgrade to 9.3.1 iOS I am more able to use one of the hotspot from my iPhone to connect to the VPN from my company using Cisco AnyConnect.  I can still connect via Wi-Fi, but not with the iPhone 5s or 6s hotspot feature.

  Ideas?

  TIA,

  DM

  Hello, I'm from the Italy, and I have the same problem on my 5 64 GB iPhone.

  I have updated to iOS 9.3.1 and now I don't have the Hotspot feature in the phone settings Menu.

  What is happen? I work with this feature and now I need to change the phone!

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.