Cisco ASA 8.0.4 AnyConnect works do not with Vista and IE7

Similar Questions

• Audio & CD/DVD drive not working only not with Vista

  I have a laptop HP V6500 Pressario, with Vista Home Basic installed recently. I have two problems with my laptop:

  1 > there is no sound, and I see the error "no audio device is installed" with a red cross on the "speaker" icon.
  2 > drive CD/DVD is not visible in 'my computer '.

  These two problems are persistent, but begin to work from time to time, say once 20 times when I turn on the laptop, I see the CD drive and also audio works, but these work only for about 10 minutes...

  I tried the Dr.Fixit and it did not help and have also installed the latest drivers for my notebook to the hp site:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=2093&LC=en&cc=us&DLC=en&sw_lang=&product=3550002

  Any help to solve these problems is much appreciated... Thanks in advance

  Hey riri,.
   
  Try these steps and check the result.
  Step 1: Delete the invalid registry keys
  1. Click Start, type regedit and press to enter. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  2. in the navigation pane, find and then click the following registry subkey:
  Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  3. in the right pane, click UpperFilters.
  Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 6.
  4. in the Edit menu, click on delete.
  5. When you are prompted to confirm the deletion, click Yes.
  6. in the right pane, click LowerFilters.
  Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further.
  7. on the Edit menu, click on delete.
  8. When you are prompted to confirm the deletion, click Yes.
  9. exit the registry editor.
  10. restart the computer.
   
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: see How to back up and restore the registry in Windows
  Step 2: Uninstall any software CD/DVD burning.
  1. Click Start, type appwiz.cpl and press to enter.
  2. from the list of programs, select CD/DVD burning software and click on uninstall.
  3. once the uninstall, restart the computer.
   
  See Uninstall or change a program
  Step 3: Install device drivers in a new user account.
  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on create a new account.
  
  4. type the name you want to assign to the user account, click an account type, and then click on create an account.
   
  See repair a profile user corrupted

  See also device in Windows Vista drivers

  I hope this helps.

   

  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Key Fn of NB200 Windows 7 does not work do not with ESC and F1 to F8 keys

  I recently bought a Toshiba NB200-136 and everything worked well.

  Flash cards top/bottom of the screen to work with space, ESC and F1 to F8 keys, the rest of the function keys work without showing the cards. Lately, the cards ceased to show and I can't use the Fn + space, ESC, F1 - F8 keys (there simply no reaction), although the rest of the buttons works with the Fn and the LED lights constantly when you press the Fn.

  I have reset the flashcards, checked and changed their settings a few times and they work only if I choose 'Allow the mouse do the maps' option. Even while they do not appear when I press Fn and functions work only when I click one of the cards.

  The problem appeared after (although I don't know if immediately) situation:
  I clicked on start-> Shut down and closed the lid. When I opened the next morning, I saw an empty list of programs that do not stop (it happens quite often, but this is off the top). I clicked 'Cancel' or 'Closed Force' but it didn't work so I pressed the power button for 5 seconds to turn off the computer. I noticed the problem of the Fn after having turned it on and it does not disappear after reset.

  I think that the problem appeared before but disappeared after reboot, so I ignored it.

  I will be grateful for your help.

  All the time that you force Windows to stop instead of leave, he stopped normally (sometimes you must turn it off), you may have lost clusters of data that interfere with the correct operation of Windows. Then I suggest that you start and run scandisk and make sure that you check the box to solve the problems. The other box must not be marked if you suspect bad sectors on the hard disk and it takes a long time so I recommend you to check the box only to find and correct errors.

  Let us know if it worked and the problem is resolved.

  Good luck.

• Satellite A130: Fn key not working only not with Vista - only FlashCards

  Hello

  I've been looking around in the forums, but I couldn't find solutions to my problem.

  I have a satellite A130 and I am running a windows VISTA family Basic. I have a problem with my fn functions.
  I can only use flash on the top of my screen cards, just by dragging my mouse upwards on the top of my screen.

  The key works only when I start my computer, at startup, but when the computer is running, there is no other "fn", I could use but my mouse to show my flash cards and use them.

  Is there something else I could do?
  Thank you

  I have same situation, remove the starting windows for the form Flash cards and you have no pictures at the top of the desctop, but keys will work.

• Re: With DVI-d port PA3542E-2PRP Dynadock not working only not with Vista

  Hello

  I have a new laptop under Vista Home Premium.
  First thing I'm trying to install is the driver Toshiba Dynadock - new model of a PA3542E-2PRP (with DVI port).

  Immediately ythe driver is installed, an alert appears explaining that the color palette will be changed because of the incompatibility. In others, the laptop screen turns off completely (until I have remove the connection to the dynadock, when she returns to normal). I then install the updated driver from the site Web of Toshiba (proposed in previous thread by Eldorado 17 Jul 07). I have trouble to install it correctly, but when I do, it corrupts one of the laptop video cards.

  It have since then done a 'restoration' on the laptop, so am at square one. However, I am wanting to continue using the Dynadock if possible - of the very welcome suggestions please!

  Thanks in advance

  If I understand correctly, you were able to install the software on Vista Dynadock, but now the graphics driver installed doesn't work as it should I am mistaken?

  Well in your case I n t see no problem with Dynadock but driver you graph. Therefore, an update of the graphics card driver would be desirable

• Age of Mythology Gold Edition works only not with Vista 64

  Ok. Same computer. Different operating systems it works very well. It is a problem of Vista 64. When I start Age of Mythology or Age of Mythology Titans he keeps asking the number of CD 1. This version came on a DVD. Even if the DVD is in the DVD player I am always asked the same question. What is going on? How should I do? Oh! The other operating system, I've tried is 32-bit Windows XP. Yes it is a 64-bit computer.

  For those who are interested,
  I tried all the proposals by Gloria. No worked. There is no update I can find on the Microsoft Web site. So! If you want to use your Windows XP games, you need to do. It is still possible to run the 32-bit of Windows XP on a 64 bit system. I created a system boot duel using Vista 64-bit and 32-bit of Windows XP. The system is set to boot Vista normally. You can select Windows XP 32 bit on startup when you want your 32-bit games. I was forced to do it with my MSTS as well. I have a control RailDriver. There can be no drivers 64 bit at the time of writing.
  The foregoing is shared so that others can benefit form, what has been done. By the way. Not all 32-bit games need this treatment.

• Volume button doesn't work is not with Vista Business

  Everyone knows what software Toshiba should I install in order to use the volume button in Vista Business? I have a Qosmio G20-102. Thank you.

  Hello

  Are you could not change the level of sound volume under Vista?

  The problem is that only some unique Vista drivers have been released for Qosmio G20 and not all functions can be used.
  But don t give up Andrej! There is a hope! Thanks to all the forum users who post proposed solutions!

  I found this very long, but interesting and useful article about the installation of Vista on Qosmio G20.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20494

  The user FranciscoJr is a guru of the G20 Vista + Qosnio ;)

  A hint; some of the objects of Toshiba value added package for the G30 can be installed on the G20.
  Install only the selected items. Otherwise, you will have conflicts with the windows Mobility Center.

  Good luck

• HP deskjet 1300 works do not with vista

  When the upgrade of XP system to Vista 32 bit and the upgrade of drivers it doesn't and tried almost all sites.

  Thank you for your time in advance!

  Hi GabrielMora,
   
  -What exactly happens when you try to use the printer on your system? You receive an error message or error code? If Yes, indicate the same.
  -What is the status of the device (printer) in the Device Manager?
   

  See if you can print the test without any problem page:

  Print a test page

   

  Run the fix it tool from the link given below and check if this can help you in the matter of fixing.

  Solve printer problems

• iTunes 11.4 works do not with my new iPhone 6sPlus

  iTunes 11.4 works do not with my new iPhone 6sPlus.  Do I need a different version of iTunes?

  Yes, you will need a computer, iTunes 12.3.2.

• XPS 1530 internal mic not working not not with Vista

  XPS 1530 internal mic not working not not with Vista

  Hello ThomasBarnette,

  Thanks for choosing Windows and thank you for providing an opportunity to help you.

  According to the description provided, it seems that you are having problems with the internal mic.  As I understand the internal microphone does not work.

  Download and install the drivers for the Chipset from the link below and check.

  http://www.Dell.com/support/drivers/us/en/04/product/XPS-M1530

  Answer to us if you are having problems with the internal MIC or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• HotSpot iOS 9.3.1 works do not with Cisco AnyConnect

  Does anyone else have this problem? Since the upgrade to 9.3.1 iOS I am more able to use one of the hotspot from my iPhone to connect to the VPN from my company using Cisco AnyConnect.  I can still connect via Wi-Fi, but not with the iPhone 5s or 6s hotspot feature.

  Ideas?

  TIA,

  DM

  Hello, I'm from the Italy, and I have the same problem on my 5 64 GB iPhone.

  I have updated to iOS 9.3.1 and now I don't have the Hotspot feature in the phone settings Menu.

  What is happen? I work with this feature and now I need to change the phone!

• licenses for a cisco ASA active/passive pair AnyConnect SSL

  Hi all. I buy 2 5512 x ASAs is configured like a pair of active/passive as a VPN device. I need to purchase licenses for both devices anyconnect? Thank you

  Licenses AnyConnect Essentials (or premium) are combined on a cluster failover ASA. Reference

  So, buy once only the quantity and type of licenses you need based on your end users - not based on the number of ASAs - and they will be available at the ASA Active whether primary or secondary unit.

• ASA (v9.1) VPN from Site to Site with IKEv2 and certificates CEP/NDE MS

  Hi all

  I am currently a problem with VPN Site to Site with IKEv2 and certifiactes as an authentication method.

  Here is the configuration:

  We have three locations with an any to any layer 2 connection. I created each ASA (ASA5510 worm 9.1) to establish one VPN of Site connection to the other for the other two places. Setting this up with pre shared keys and certificates that are signed by the CA MS administrator manually work correctly.

  But when we try to enroll these certificates through the Protocol, CEP/NDE his does not work.

  Here are my steps:

  1 configure the CA Turstpoint to apply to the certification authority

  2. request that the CA through the SCEP protocol works fine

  3. set up a Trustpoint and a pair of keys for the S2S - VPN connection

  4. registration form identity certificate CA via the SCEP Protocol with a one time password works fine

  5. set the trustpoint created as for the S2S - VPN IKEv2 authentication method.

  Now I did it also for the other site of the VPN Tunnel. But when I ping on a host that is on a different location to make appear the Tunnel VPN - the VPN session is not established. In the debugs I see that there are a few problems during authentication of the remote peer.

  On the MS that I see that the certifactes of identity for both ASAs are communicated and not revoked or pending state. The certificate based on the model of the "IPSec (Offline).

  When the CA-Admin and a certificate me manually based on a copy of the model of "Domaincontroller" connection is successfully established.

  So I would like to know which is the correct certificate for IP-Sec peers template to use for the Protocol, CEP and MS Enterprise CA (its server 2008R2 of Microsoft Enterprise)?

  Anyone done this before?

  ASA requires that the local and Remote certificate contains EKU IP Security Tunnel Endpoint (1.3.6.1.5.5.7.3.6) (aka IP Security Tunnel termination). You can create a Microsoft CA model to add.

  If you absolutely must go with the 'bad' cert, there is a command

  ignore-ipsec-keyusage

  but it is obsolete and not recommended.

  Meanwhile at the IETF:

  RFC 4809

  3.1.6.3 extended Key use

  Extended Key Usage (EKU) indications are not required.  The presence
  or lack of an EKU MUST NOT cause an implementation to fail an IKE
  connection.
  

• iPads not working only not with the cache server

  Hello!

  We have implemented a Server Cache El Capitan... And the strange thing is that it works with macs and iPhones but not with iPads! Has anyone of you ever heard of something similar?

  Thanks in advance!

  Carl

  It works with macs and iPhones but not with iPads!

  There are many variables that affect how to find caching servers Apple devices.  Signed iPads on the same account iCloud like Macs and iPhones, or more precisely, are the accounts that iPads are signed in registered in the same country as the public IP address of the server being cached?  If your organization uses multiple public IP addresses, are the server cache and your DNS server set up correctly in what concerns these addresses?  Did you restart the iPads after implementation of the caching server, so that they immediately "forget" that they have found no update server caching and are forced to review?  (Restart devices - not the server!-is also recommended if you change the public address record in DNS.)  IPads use a different local subnet as other devices, maybe a caching server is not configured to serve?

  We can help you, but we need more information.

• AirPlay works do not with iPad to AppleTV

  Hello

  So, for the last few days I tried to get the airtime to play videos from my iPad but it gets stuck on the loading circle.

  IPad is Ios9.2.1, I don't know what is the version of the apple tv.

  The strange thing is that without change of settings, the airtime used the week last with no problems sending video from the youtube app and plex and google chrome.

  Now plex and videos Google chrome app just remain constantly loading. the youtube app works with the antenna but nothing else.

  Mirror mode works, but then I can not get the video full screen.

  Internet high speed is not a problem, and interference should not be a problem I tried to move everything off the power outside of the apple tv, router and iPad and it still does not work.

  Is anyone able to shed some light on this problem?

  Thank you

  Once you start to play, to turn briefly walk AirPlay on iPad. It worked for me.

  Please check your version of ATV and report it here. This identify your model of Apple TV - Apple Support should help.

  If it's 4 ATV, go into the settings and check the version of the software. First of all, we have experienced this phenom with tvOS 9.2. You may have updated your ATV software recently, triggering the problem.

  If it suits it, you should report it to http://www.apple.com/feedback/ reports more, better.