HP Deskjet 2640: no print black after 3 months of non-use.

Similar Questions

• How to stop screen go black after 30 seconds of non-use?

  If the mouse is idle for 30 seconds screen goes "idle" mode and you need to move the cursor to get the last page.

  It's infuriating.

  Right-click on your desktop,

  Click on customize,

  Click on the link at the bottom right, screen saver

  

• HP Deskjet 970Cse only prints red after the new color cartridge installed.

  HP Deskjet 970Cse only prints red after the new color cartridge installed. I use black HP 45 and HP 78 color. Both are new. I know the printer is an older model, but it works well a month ago.  Any help would be appreciated.

  Thank you for your help.  It was a faulty cartridge.  I pressed a white cloth on the ink source and only yellow and blue were visible, without red (magenta).  I've returned the fabric and cartridge in the store (with my receipt) and managed to get another canister... it worked!  Both cartridges have dates of expiry of 2016.  Glad I didn't have to spend time troubleshooting my printer.

• HP 3520 while a printer does not print black after changing ink and cleaning head

  My 3520 printer all-in-one will not print black after cleaning print head and replacement of black ink. the printer is a little older than a year. All printing inks.

  Hi handytim1,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cleaned the printhead and replace the cartridge without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  Let me know the results, I'll watch for your reply.

  Thank you

• Display disappears after the period of non-use. The display is fine (a plasma), the computer is running. But no display and must restart.

  Hi-for no apparent reason, the computer has developed the following: after a period of non-use (always on computer), when I re - turn on the monitor I get a black screen.  Using the mouse, knocking every possible key produces no image on the monitor.  Meanwhile, the hard drive is very hard.  Only the appeal should restart.  Any ideas?

  As I said it's a guess.

  Let us know if find you the solution.

• Could not print black after installing new ink cartridge

  I installed the new black cartridge on my deskjet 3520. This is the original hp ink cartridge.

  also reinstalled the software of hp deskject.

  It shows even good condition here.

  but just no matter if I try to copy/printing, the printer started working and looks like it's actually printing, but after he gives me a blank page.

  

  Please can you me what should I do?

  

  Hi @Laviniania,

  Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Deskjet 3520, you cannot print in black ink, you tried an alignment without success.

  I would like to continue you here: printer does not print black ink or color of ink or prints blank Pages, I understand, you may have made some of these steps already but I need you to complete all the steps in order to solve the problem of the missing black, you encounter.

  Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

  If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I highly recommend call you our technical support at the 800-474-6836, I'm sure they will be able to help you regardless of the status of the guarantee. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

  Thank you

• Brand new HP Deskjet 2541 not printing black

  My printer is several months and started not printing black and Ive went through all the alignment and cleaning.

  When I made the text color gray he printed Im assuming that it is not only the black ink

  Hi jayirvinh,

  If the guide I provided did not resolve your problem, the printer will need to be repaired / replaced. Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  If this, or one of the posts on this thread, helped you to solve the problem, please click 'Accept as Solution' said post. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Best regards!

• Photosmart 210 a: won't print black after installing new print heads

  Hello, I bought and installed a new printhead. It will print color but not black.  They were all new cartridges when the print head went down.  the tools to say all the cartridges are full, please help.

  Hey there @LMACE!

  Thanks for posting on the HP Forums!

  I see that your printer is not printing black once the print head had been replaced.  I would be more then happy to provide you with some suggestions that can make things work again.  The first thing I would suggest is to remove the cartridges and printheads the printer and manually clean the electrical contacts on the printhead and the printer.  It is possible ink sprayed on the copper contacts causing a bad connection, when the new print head has been installed.  If the printhead is not getting a good connection, you may notice messages on the printer error and poor print quality.

  To clean manually the printhead in the B210a Photosmart click here: manually clean the print head

  If please, after back and let me know how it goes!

• HP Deskjet Ink Advantage 3525: HP Deskjet 3525 not print black, but print [Black] symbols!

  Hello.

  I have HP Deskjet Ink Advantage 3525 e-all-in-one printer.

  The printer stop printing in black.

  I am trying:

  1. put the new cartridge HP 655 black original .

  2. I do several head cleaning cycles.

  3. I gave for printer.

  4. I remove the cartridges, turn the printer off, swith on the power cable, wait for mo to 60 seconds and plug everything back.

  5. I clean the vents and the surface of the black cartridge.

  6. I do everything, what I see in the paper by HP - Printers - HP Deskjet 3520, color or black ink not print

  And all of this does not help. My HP 3525 does not print black.

  Moreover, if I print a test page for the printer, I see racks, which are printed in black!

  At the same time, the black level is not printed!

  Please, help to repair!

  Hi @MobileWanted,

  The printer is probably using composite black. A mixture of the color cartridges will create black.

  The print head is probably clogged. This model has a permanent print head. Not one of HPs, my personal recommendation is to use the solution put forward in the next video.  I suggest you only do this if the printer is out of warranty: How to fix a HP printer, printing black ink not.

  If the printer is still under warranty, please call for a replacement printer.

  Thank you!

• DeskJet 2541: brand new HP Deskjet 2541 not printing black

  Just set up our new Deskjet 2541. Impressions color very well, but when I try to print black it prints a blank page.

  Ink estimate shows that the black cartridge is about 75% full. I ran the alignment and vacuuming twice.

  I also tried to do a hard reboot by unplugging for 30 seconds and then plug it in.

  As much as I know there is no problem with black cartridge, its all just not printing.

  Help?

  Edit: I took out and put new and when the alignment page is printed there are 2 red arrows and a warning sign on the bottom half red. Upper half a blue colors only.

  It's working now. No idea of what he did, I turned it off for a whole day and when I restarted the properly printed alignment page and black now works!

• Will not print black after replacing the black ink tank

  After replacing the black ink tank, the printer does not print black data (text or graphic).  I ran printing HP and scan doctor utility and printed assessment page.  The text is printed in a pale blue color. Gray scale apperas block (far right) to have no black content and has a hint of cyan.

  Printer:

  HP Officejet 6000 E609n

  Thanks in advance for any help

  OK because that is a thing of warranty which may be worth dip the printhead as described below...

  (1) get a pan and put 1/2 "of very hot (not boiling) water in the bottom.
  (2) remove all ink cartridges, then remove the print head Assembly.
  (3) gently put the printhead nozzles down in water and soak for 5 minutes.
  (4) remove the print head and gently dry the electrical contacts.
  (5) replace the print head in the printer and then reinstall the ink cartridges.

  http://h30434.www3.HP.com/T5/Ink-toner-cartridge-printhead-issues/HP-6500-Office-Jet-E709a-black-printer-cartridge-HP-920-not/m-p/447545#M36315

• DeskJet 3520 not printing black

  With all the posts on the 3520 does not print black, why is not able to find a SOLUTION from HP?

  The PATCH should not be I'm going to buy a new printer.  I already have 3520 ink that I know what to do with... especially BLACK.

  If the printer needs to be reminded, remember!  I realize that I bought a printer $ 89... However, it should work the way it was intended... flawless......

  @TWBond007

  Sorry to hear about this, I can please advise that you call the Support team you may require a replacement...

  Phone numbers

  http:// Welcome.HP.com/country/US/en/wwcontact_us.html

• OfficeJet 4620 do not print black after changing the cartridge

  Changed the black cartridge would NOT print printhead black, cleaned, aligned over and over again.  Two days later, he started printing red for emails when should have been black.  Once again cleaned and aligned.  Changed the black cartridge XL multiplied by 2.  What a wate of money!   Page Test Windows printer printed in red.  Noticed that the Cyan cartridge was empty when viewing in troubleshooting.  Printer has never indicated that cyan was empty.  Changed the Cyan cartridge.  Now the Windows printer Test Page prints in black.  What is going on??

  Hi people,

  It seems that you have trouble with your ink.

  Please complete all of the steps described in the following document; Printer does not print black ink or color of ink or prints blank Pages, if the problem persists, I suggest you call the HP support by phone no matter whether in or out of warranty you may need a replacement printer.

  The number of call HP is 1-800-474-6836 for the Canada and the United States, or you can Contact HP worldwide.

  Please let me know the results of your call to HP.

• Ink advantage 3515: printing issues from ink advantage 3515 after a month of no use

  Hello everyone.

  I have problems with the print quality. In the summer, I installed the new HP original cartridges (black and color), a few printed pages and soon, I went to holiday - my printer has not been used or even turned on for about 5 weeks. A few days after my return, I tried to print text. Horizontal stripes appeared. I tried cleaning software (a natural and deep) and the deep one always helped. However, when I tried to print something the next day the problem was back. I tried the update of drivers and clean the print heads and also I cleaned the cartridges with alcohol and a q-tip. Nothing seems to solve the problem completely. While this could be due to a faulty cartridge, I don't think it's possible for the two new cartridges, I bought to be somewhat damaged. I have attached a scan of the printed text - it has been printed in the landscape, vertical blank lines, you see are indeed horizontal.

  If you need further information please request now.

  Hi @Iwina,

  Welcome to the HP Forums!

  I understand that you have found horizontal stripes when printing with your printer HP Deskjet Ink Advantage 3515. I'm happy to discuss this issue for you!

  It is possible that the problem could be that during the time of your vacation, without the printer used. What ink cartridges could have dried a little. It is also possible, they could be defective cartridges. I would like to double-check that the steps outlined in this guide, print quality problems, have been completed. And that no steps have been missed.

  If the guide does not solve your problem, the ink cartridges will still be under warranty and should be replaced. Please contact HPtelephone support for further assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  For more information on the use of the ink in your printer, please read carefully this document, the use of ink in inkjet printers.

  Good luck!

  "Please click the Thumbs up icon below to thank me for having responded."

• Print questions after the custom section changes using a printed code

  Hello

  We have problems with the order of the custom section. Please find below bottom

  1. we have a custom code to print sections customized specification associated with the material specifications

  2 this custom code developed 2.5 years ago and absolutely perfect job

  3. this custom code actually built XML sections customized the associated specification which is transformed into PDF using XSLT by extending the print features.

  Recently, we changed the order custom sections appear in hardware specifications. Once the order gets modified with the help of Admin-> Data-> custom section order Custom. New order got reflected in all the technical features without any problem

  But the custom sections do not print in the same order

  When we studied, we found the following

  1. printing order is fine when using the default print template provided by oracle

  2. printing order is not very well when we use our custom print template that uses our custom code developed 2.5 years back

  When we have investigated further, we discovered that any new record is created once the order has changed to print very well in the same order using our custom code

  But the old specifications that were created before the implementation of the custom section control do not print in the same order

  Debug us the solution, with the old card and discovered that code is return data in the old order and not in the order indicated in the specification

  We tried all the properties we could and noting works as expected for the old specifications and new specifications get the order appropriate under the new defined order

  None of the sub properties get the data in the correct order in the old specifications

  ICollection customSections = ingSpec.ExtendedAttributeSections.OrderedModifiableValues;

  ICollection customSections = ingSpec.ExtendedAttributeSections.OrderedValues;

  ICollection customSections = ingSpec.ExtendedAttributeSections.ModifiableValues;

  Can you please let us know if this is a bug in the product? or is it possible that we can do our custom code works for the old specifications?

  Can you also let us know which table stores information about order of custom hardware specifications section?

  Thank you

  Mani

  Sounds like the same issue post to https://community.oracle.com/thread/3804143.

  Thank you

  Pourbaix