HP deskjet 3050 a do not print wiressly

Similar Questions

• DeskJet 3050 j610a does not print

  Hi, my Deskjet 3050 j610a has stopped printing in black or color. I use Windows 7 and Surface RT with this all-in-one wireless printer, and I have reinstalled the printer software earlier. HP diagnostic tools say the printer is fine, but it is not printing. It is visible to my computers and even paper and looks like it is printing. Just no images on the documents.

  Any ideas out there? Thanks for the attention.

  HTG

  Thanks for the suggestion. It turns out that HP tech support was able to understand my printing problem came to have old cartridges. I went to the store and got new ones, and now the printer is once again beautiful documents. Thank you, HP!

• Help! Deskjet 3050 1 does not print wireless

  I have a Dell computer, windows Vista and have had my printer for 5 months, working wireless no problem.  All of a sudden it will not work wireless, but will work with a USB key in.  The blue light on the printer wireless is enabled and the IP address appears on the small screen on the printer.  Is it always the case that there is something wrong with the printer itself and I need to return it? I'm not very high on the commands from the computer, but have not done something strange to change anything.  If I try to print something, the printer on my computer icon shows just job in the meantime.  I deleted the work he did not print.  Any help would be appreciated.

  OK, your printer is properly connected to your router.  You don't need the USB cable.  Unplug unit.

  Now, go to start > Control Panel > printers and delete all instances of the printer.  Now let's add the instance of the network printer:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• HP deskjet 3050 j610 does not print

  My printer wouldn't print tonight. So, I uninstalled and thought I'd start from scratch. Well, no luck. I've got Mac 10.9 Maverick and he said that I don't need to download all the drivers. No matter what I try, I can't do the Apple software updates. So, I have nothing in my Applications Macdrive folder. What can I do to recover my printer? Furthermore, it is wireless, and Yes, it works. Thank you, Shirley

  Thanks to 7000 Rainbow for assistance. My printer working again although I don't have the HP icon in my Applications folder over. Is the usual icon in my dock. I had installed a while Maverick and the printer worked so, I don't know what happened. Oh, well...

  Thanks again, Shirley

• HP Deskjet 3050 J610 Series. Print out very light in the body of the document, but not on the headers

  Hello.  I just replaced the ink in my printer, but it's not print as before.  I went to setting and tried several ways and still cannot printing be dark enough to read.  When I do AOL mail, the header comes out dark (with to, of, date, etc.), but the body is pale gray.  Would you please help me understand the settings, or how to retrieve the default value?  Thank you so much, I really miss print and hate writing long-hand [under the direction of personal information] 

  Hi Molly9094,

  Welcome to the HP forums!

  I see your message you have a Deskjet 3050, after changing the print cartridge is not as he had before. I'm sorry to hear that, but I will certainly do my best to help you!

  Just to be safe, I would test the hardware of the printer to make sure that everything goes well on the end of the first. If you print a Network Configuration Page does it come in black?

  If you print from somewhere on your computer such as Notepad (Windows) or Text/Edit (Mac) coming out as it should be, or must it also a lot of pale gray?

  Once I know this information can we move forward!

  Hope to hear from you soon!

• DeskJet 3050: HP Deskjet 3050 nothing happens when printing from a laptop computer, but works very well of others

  So I just got a new laptop and I am trying to connect to my printer. I think he has connected all the beautiful and the printer will appear on my laptop. When I go to print something good, it is said that it is printing on my laptop (including indicating the percentage of how much it is printed) before disappearing from the queue on my screen. Nothing happens however on the printer.

  When we use another laptop that is connected before, it prints perfectly.

  Not really sure what is in place and was hoping someone could help me!

  Thank you

  Hey @burtonc,

  Welcome to the Forums of HP Support!
  
  I see that you have some problems with your Mac OSX 10.11 machine printing the Deskjet 3050 all-in-One printer. I can help you with that.

  To resolve this issue:

  1. If the printer is connected via USB cable to your Mac, delete it.
  2. Click on your Apple icon, system preferences and printers and Scanners.
  3. Hold down the CTRL key and click the icon of your printer on the left side.
  4. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the 'more' in the corner.
  2. Select your printer from the list.
  3. Click in the box next to and select your printer from the list.
  4. Click on Add.

  Please let me know the results follow these directions. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP Deskjet 3050 (J610) - can not find the claim code

  I have a HP Deskjet 3050 J610 Series. I searched the support site of HP and may not know how to configure my ePrint printers. My ePrint printer turned on?

  There is no instructions that correspond to my machine on this site:

  http://support.HP.com/us-en/document/c03550536

  I found a video on the "HP Deskjet 3050 a" but it was very different from the standard 3050. My printer is set up wireless and I am able to print from my Android smartphone, but only if I am connected to the same wireless network.

  I have the impression that with a connected HP account and my claim Code printers, I can print from my smartphone using the Google Cloud from anywhere, I have access to the internet. I can't find my printers claim anywhere Code. I can print the HP Network Configuration Page in the menu on my printers Control Panel wireless, but it looks nothing like the page in the video.

  Thank you in advance.

  Hello

  The series HP Deskjet 3050 (J610) do not support the ePrint and therefore does not claim any code.

  The printer Deskjet 3050 a Series (J611) supports such a, your printer is not.

  You can view this document as a reference, the printer does not support Web Services and only allow printing via the local network:

  http://support.HP.com/us-en/document/c02814760

  Shlomi

• HP Deskjet 3050 J610: HP Deskjet 3050 J610 will not scan

  My Deskjet 3050 J610 will not scan. On the printer I ask him to sweep and I get "error Scan. Try the Scan of the computer.

  I have no instructions to achieve this. There is no icon for scanning and no sense.

  Thank you for your response. I downloaded and tested the necessary software and it worked perfectly.

  Thank you for helping me with a resolution.

• Why can't I make my Deskjet 3050 to the default printer

  Why can't I make my Deskjet 3050 to the default printer?

  OS windows 7 home 64 bit.

  Repeat the previous printer is default but I uninstalled

  Hi lions99 just to update your printer sorted now something to do with the connection to the router / laptop and printer, all a bit above my head when he was explaining to me, he needed all the info from router to set up because he did not find it automatically.
  Kind of sorted now thank you again for your much appreciated efforts.

• DeskJet 3050 J610: Unable to print from computer; all I get is an impression from a scan, even print over and over.

  About 2 weeks ago I scanned a page in my printer (HP Deskjet 3050 J610) and then print. Since then, I've tried other printed documents, and all I got is a reprint of this analysis. I tried to reset the printer in stopping, pulling the plug, wait a few seconds to reconnect and then hold it simultaneously "on" butten, cancel andf the last button in the printer. It made no difference.

  Hello

  This is unusual sound.

  Have you tried restarting your mac? If this isn't the case, I recommend doing this to see if it helps.

• DeskJet 3050 a: Alignment Page prints clearly. Docs are not!

  Yesterday, I installed a new HP print cartridge (#61 black) in my printer HP Deskjet 3050 All in One, J611 a. (Everything was fine with the printer before installing the new cartridge).

  I printed the alignment page, which looked very well - clear, strong.

  Then, I placed the alignment on the scanner page and clicked OK. The alignment page has been analyzed and the printer said alignment was successful.

  Then I tried to print a Word Doc. The letters and images were not aligned - the entire document had to effect "double vision". I tried this on the parameters of "fast draft" and "best quality". Same effect. Also, I tried to print a pdf file as well as a page directly from my Safari browser. Same effect.

  I then tried to change the route. Still, the alignment page prints perfectly. Double no vision. A beautiful look at just the page, I expect. Unfortunately, when I tried to pring a doc: double vision again.  I have tried to align the printer, this time by sending orders for the Mac (instead of directly from the printer). Alignment page prints fine. Scan reported successful alignment. Doc printed: double vision.

  I cleaned the scanner glass.  I have confirmed that there is enough ink in the color cartridge.  I then printed a "Printer Status Report." As with the alignment page, the status report is out of the printer looking for very well. And nothing in the report that indicates problems.

  Finally, I scanned the document alignment and sent the image to the Mac. The image looks perfect on screen. I printed the image. Double Vision!  I then tried to copy the alignment page using the printer copier. Is where it gets very weird: there was a double vision on dashes and and angled brands, but the text and the image of the printer (taking the low third of the alignment page) print perfectly well. In other words, with an alignment page perfectly readable on the scanner glass, I pressed the copy and the result was a double vision for some but not all that printed ON THE SAME PAGE!

  Help! And thanks in advance for any help you can offer.

  MAC OS 10.7.5

  SOLVED!  I got a question on this site involving a printer that has not detected the alignment page ("Officejet 5510 alignment page not detected').

  The difficulty seems to be to eject BOTH cartridges.  That's what I did: (1) ejected the bw, then the color cartridge (2) turn the printer off, then on, (3) reinsert the color cartridge and then the cartridge p.c., (4) printed a new alignment page, (5) scanned the alignment page, (6) printed a Word Doc.

  Everything seems to work very well.

  I hope it helps others with similar issues to printer.

• DeskJet 3050 J610: PDF files print does not correctly

  Hello

  I have a HP Deskjet 3050 J610 Series all-in-One Printer using Windows 10. It is not wireless I'm using a USB port for printing.

  I used the HP printer Assistant, make sure that the printer has been updated with the latest version of the driver. I ran the cleaningprogram.

  My problem is, when I try to print a PDF file all the text within the framework of the formula is clearly printed. It is printed, but it is very indifferently.

  Is there a kind of setttings that can handle this?

  If I print the PDF file and tick print as image then it prints all text clearly.

  Looking forward to hear from you

  By Lunau

  Hi @PerLunau,

  Welcome to the Forums of HP Support! I see that you have problems printing when printing PDF documents, but when to print as an image solves the problem. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Make sure you have the latest version of Adobe Reader or Acrobat.

  Please take a look at this document for PDF printing problems, PDF print troubleshoot | Acrobat, Reader.

  I hope this helps. Good day! Thank you.

• HP deskjet 3050 a j611g: hp deskjet 3050 a j611g-not to print any page, giving a blank page of outter

  Hey.
  I have a printer hp deskjet 3050 has j611g. There is ink on the inside (almost 25% black ink available), but when I send a print, he don't never print anything on it, even there is not inside the printer to print anything or take the time to print on the page. paper will quickly inside and from outside really fast... I would be very grateful for all comments. Thank you.

  Hi fahidb ,

  Welcome to the HP Forums.

  I see that you have a problem with the printer not printing and sending on a white page.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  I have also found a document on repair print quality problems for the HP Deskjet 3050 a (J611) all-in-One Printer Series.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

  See you soon,.

• HP DeskJet 3050 J610, adding not successful in netwerk printer

  Hello

  I installed the DeskJet 3050 with the supplied software.

  Now I add this printer in the netwerk, so I can use wireless.

  I use the software ' Connect new printer ' HP.

  The software detects my network.

  When the software ask for the networkKey, I provide them.

  Then the software installation attempts find find my printer in the netwerk, but fails.

  the return message is "cannot find the printer."

  I use the Linksys Wireless - G broadband router.

  The router is configured with the Security Mode: WPA2 Personal

  Algorithms: AES

  What must I do to solve this problem, so I can use my wireless printer?

  If anyone can help?

  Thanks in advance.

  Henk Elzinga

  Hey well done,

  I followed the steps mentioned.

  And it works now.

  The printer is on a network, and it works.

  Thanks for your good help.

  Kind regards

  Henk elzinga

• Example: HP Deskjet 3050 has J11n: my printer Hp3050n used to scan to my applemac

  Until recently my HPDeskjet 3050 has scanned on my mac automatically j11n. It will not now and message scanner is not found. I am completely ignorant about computers. Help, please! Thanks.I could have disabled and now don't know how to connect.

  Hi @Valerie35,

  Welcome to the Forums of HP Support! I see that you are running into some problems of printing and scanning to your HP Deskjet 3050 has, when you try to scan, you get an error message 'not found computer '.

  If you have recently lost the connection between the printer and your network wireless, you have to reconnect using the USB key to the wireless configuration.

  Please go ahead and start troubleshooting here: printer does not maintain the wireless connection

  I hope this helps, let me know the result!

  Thank you