DeskJet 3050 J610: PDF files print does not correctly

Similar Questions

• HP Envy 4524: Printer PDF files print does not correctly

  I have two files: a jpeg and a single pdf, card, size A4.  They look identical when displayed on the screen, but when I print, the jpeg format is perfect and the pdf smear through it. This is a new printer and I had no such problem on my previous HP Photosmart 6510. Any ideas?

  Hello @pamhans, greetings!

  Welcome to the HP Forum! It is a wonderful location to converse with the community, get help and advice.

  I understand that you are having problems when printing an image in PDF format. I would like to help with that.

  First of all, I would like to know the app that you use to open / print PDF files. You use "Adobe reader" or another application?

  If you do not use the Adobe reader software, please install Adobe reader, and then try to print the pdf image.

  If you already use Adobe reader software, follow the steps below:

  1. try the option "Print as image":

  • Choose file > print and then click Advanced.
  • Select print as Image.
  • Click OK to close the Advanced Print Setup dialog box, and then click OK to print.

  2. install the last update:

  • Open Acrobat or Reader.
  • Choose Help > check for updates. If a new update is available, it installs automatically.
  • Once installed, restart your computer.
  • Print the PDF again.

  In addition, please go through the steps here: http://hp.care/2dSDxCD

  Please let me know if that solves the problem, or if you need assistance

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• DeskJet HP 1510 alignment page print does not correctly

  Ive recently bought a series all-in-one printer Deskjet of HP 1510 and Ive got to the stage where I need to align my printhead. However, the alignment page that is being printed is not print entirely - there are no words on the page at all - so I cannot complete the installation of the printer and cannot print anything. How could I solve this problem?

  Hi shansha1,

  First I press the Cancel - button red X (see image below)

  

  I found this document of support which may help. Please click on the link below:

  http://support.HP.com/us-en/product/HP-DeskJet-1510-all-in-one-printer-series/5157551/model/5157552/document/c03800862/

  Scroll down to Solution 6 and follow the steps to print a diagnostic page.

  I hope this helps.

• When I try to print a PDF file it does not print and goes directly to a backup of the file option.

  When I try to print a PDF file it does not print and goes directly to a backup of the file option

  original title: pdf print
  Hello

  1. don't you make changes on the computer before the show?
  2. don't get any error message?
  3. what version of the operating system is installed on the computer?
  4 is the issue limited exclusively with printing PDF files?
  5. where are you printing from PDF files?
  6. What is the brand and model of the printer?

  
  Method 1:
  Run the fix it and check.
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
  
  Method 2:
  Perform the steps from the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  
  Method 3:
  You can perform the steps from the link and check if you are able to print.
  Resolve PDF printing problems. Acrobat, Reader
  http://kb2.Adobe.com/CPS/873/cpsid_87346.html
  
  Reference link:
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• DeskJet 3050 J610: Unable to print from computer; all I get is an impression from a scan, even print over and over.

  About 2 weeks ago I scanned a page in my printer (HP Deskjet 3050 J610) and then print. Since then, I've tried other printed documents, and all I got is a reprint of this analysis. I tried to reset the printer in stopping, pulling the plug, wait a few seconds to reconnect and then hold it simultaneously "on" butten, cancel andf the last button in the printer. It made no difference.

  Hello

  This is unusual sound.

  Have you tried restarting your mac? If this isn't the case, I recommend doing this to see if it helps.

• HP jet 7500 a desktop: office jet 7500 a print does not correctly

  Hello
  After you run the print doctor, cleaning and aligning the print heads that it is still print does not correctly. the first page comes out perfect so the print quality gets worse, with bits wilted and things missing. just print a page of print quality and black looks at all and the first steps of pink and yellow are strong, blue stripes and then 2nd very faded pink and yellow bar.
  any ideas?

  Hey watch this video of HP, how do I solve this https://www.youtube.com/watch?v=c422Q-EhMXI if this fixed your problem can you give me a point of congratulations. Thank you

• HP Deskjet 3050 J610 Series. Print out very light in the body of the document, but not on the headers

  Hello.  I just replaced the ink in my printer, but it's not print as before.  I went to setting and tried several ways and still cannot printing be dark enough to read.  When I do AOL mail, the header comes out dark (with to, of, date, etc.), but the body is pale gray.  Would you please help me understand the settings, or how to retrieve the default value?  Thank you so much, I really miss print and hate writing long-hand [under the direction of personal information] 

  Hi Molly9094,

  Welcome to the HP forums!

  I see your message you have a Deskjet 3050, after changing the print cartridge is not as he had before. I'm sorry to hear that, but I will certainly do my best to help you!

  Just to be safe, I would test the hardware of the printer to make sure that everything goes well on the end of the first. If you print a Network Configuration Page does it come in black?

  If you print from somewhere on your computer such as Notepad (Windows) or Text/Edit (Mac) coming out as it should be, or must it also a lot of pale gray?

  Once I know this information can we move forward!

  Hope to hear from you soon!

• DeskJet 3050 is connected wireless but does not actually print

  Hello
  I have a Deskjet 3050 All in One Printer - j610a and I run on Mac OS x 10.9.

  I did a software update and have managed to connect the printer to my wireless network. I know that for some of my wireless network from your report print on which not only says I'm fully connected to my network, but also that I have no problem found on my connection.

  I know that my computer is connected to the same network and I added my printer to the printer list.

  Problem:

  When I go to print something from my Mac, I select my Deskjet and click on print. In fact, he says it's printing and it has printed, but nothing is in fact!

  I get no error message and what I'm looking for in says me I'm connected.

  Just nothing really going to except what I can print directly from the printer to the diagnostic reports.

  This printer used to work perfectly, but then I moved and had to put in place all over again and now what's happening!

  Help!

  I do not know how to show that this has been resolved, but somehow, it fixed itself after that I just let a little rest and then added the printer to my computer.

• HP Deskjet 2515: Printer has ink but printing does not correctly

  When printing it prints only "BOLD" colors, but it comes out of light. The words light out even at all. The ink cartridges is half full and even put in new ink cartridges. I Redid the test of ink and a number of other things, but nothing helped. Please help.

  Welcome to the HP community @MaineF,

  I wanted to reach out and try to help you with the problem you are having with your Deskjet 2515 printing with print quality problems. I understand the ink cartridges have sufficient ink levels, and that you have already tried a few troubleshooting.

  Here's the guide I recommend for you: HP Deskjet 2510, 2520 printers - solve print quality problems

  If the quality does not improve, I then and finally suggests contacting HP directly. They can discuss your next printer options, as a replacement or a trade in if they are available.

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Have a great day!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• PDF/X1a with a logo that contains a colorized grayscale tiff print does not correctly

  I have a 3 logo colors: black, SPM 200U and PMS 1955U. The logo was built in Illustrator and I placed ontop of it grayscale tiff. Tiff grayscale is a dashed effect (points) that I have colorized to PMS 1955U in Illustrator, try it hidden on top of the logo and place it to multiply. In Illustrator, separations of good appearance and it prints fine when you print directly from illustrator.

  The problem is when I export to a PDF/x1a and try to print it, it does not print correctly. Printing from acrobat, it only presents a preview and print the PMS 1955U to the dotted line and black. Does not print the flat PMS 200U in the tiff format. I tried bitmapping file photoshop and make that the monochromatic stipple and still doesn't seem to work when you export to PDF and printing.

  Funny, that's when I do the whole process for the logo CMYK (not PMS), it prints fine to a PDF/x1a.

  Any ideas on how to get the logo to export and print correctly?

  Any help is very appreciated!

  Print quality using PDF version 1.4 that supports transparency while PDF/X-1a uses PDF version 1.3 which requires transparency to be flattened.

  For your problem, try to activate the overprint Preview in Acrobat preferences and see that you get the expected results, use the output in Acrobat Preview Panel to turn off individual plate to see if your missing PMS 200U is listed and flat color appears.

  If the foregoing is not works, please send me the files to reproduce this problem at my end, I will send my email in private message for you.

  -Rama

• DeskJet 1512: Deskjet 1512 print does not correctly chosen size

  When I choose to print an A4 photo size the last 1/2 inch is missing from the picture? Lenovo windows 10 laptop running

  Hello

  The Deskjet 1512 does not support printing without such margins listed in the paper handling section:

  http://WWW8.HP.com/us/en/products/printers/product-detail.html?OID=5285093#! tab = specifications

  Minimum bottom margin is 0.57 inch, the material must not exceed these margins that you will find listed in "specifications of paper output > section of the print margins:"

  http://support.HP.com/us-en/product/HP-DeskJet-1510-all-in-one-printer-series/5157551/model/5385180/document/c03775352/

  You will need to resize the print job to supply the printable area, to get a game of margins even the top and bottom of the margins like 0.57 inches.

  Kind regards

  Shlomi

• 3545 Deskjet ink advantage: my 3545 printer does not work

  I just brought my printer., after the installation, does it take almost an hour to print the page test, plus his watch this error code., I am not able to print additional pages, the scanner also does not work... can anyone please solve my problem

  Brand new? It is broken. Take it for a full refund or a replacement.

• Standalone PDF files system does not properly

  I built a website http://greatayton.wikidot.com/ where a single file PDF Menu evokes many other PDF files.

  I now want to use the same menu system to call PDF files on a hard drive of PC with Internet disabled.

  I used hyperlinks from the Meny PDF a link to the PDF files.

  This works but speaks first of Internet Explorer then displays the actual file that makes the slow operation and unweildy.

  How can I get just the hyperlinks to open PDF files?

  Thank you

  Mike

  I bought Adobe Acrobat X Standard & works now

• Fonts in PDF reports displays does not correctly

  Hi people,

  One of our clients have the problem TH (Thai) new sarabun font is not displayed correctly.

  Our production environment has no problem.

  Info:

  Oracle Application Server 10g 10.1.2.0.2

  OS: Windows Server 2003 SP1

  1 fonts are added to REPORTS_PATH and uifont.ali as:

  [ PDF:Subset ]
  
  "TH Sarabun New..Italic.Bold.."    = "THSarabunNew BoldItalic.ttf"
  "TH Sarabun New...Bold.."          = "THSarabunNew Bold.ttf"
  "TH Sarabun New..Italic..."        = "THSarabunNew Italic.ttf"
  "TH Sarabun New"                   = "THSarabunNew.ttf"
  
  

  2 reports of.fnchk like:

  Analyzed the font alias file successfully

  
  

  3. in uifont.ali it is also at the bottom of the support section [PDF:Subset] for the Tahoma font as:

  "Tahoma..Italic.Bold.."    = "Tahoma Bold Faux Italic.ttf"
  "Tahoma...Bold.."          = "Tahoma Bold.ttf"
  "Tahoma..Italic..."        = "Tahoma Bold Faux.ttf"
  "Tahoma"                   = "Tahoma.ttf"
  
  

  
  

  If the part "Police Tahoma" of uifont.ali is not commented reports display the Thai police, but probably like Tahoma since in PDF for police report generated reports following properties:

  
  

  If the part "Police Tahoma" of uifont.ali is then commented in the PDF properties for reports generated police report that he says again that "Tahoma" fonts are used but report looks like this:

  

  4 forcing THSarabunNew in section [PDF] with:

  THSarabunNew = Tahoma

  does not help

  5. the forms distributed to clients are the same we have developed in our production environment

  It seems that somehow their environment is stuck with the font "Tahoma", so I don't know what to check next.

  Any advice would be nice.

  Thank you

  For benchmark measures which helped me to solve the problem since the customer allowed me to RD to their env:

  1. Abducted police Tahoma customer system. (Stop Oracle services not enabled me to remove the fonts so I had to kill all java processes)
  2. Uifont.Ali cleaned - star, we had in our env
  3. Oracle Reports Server restarted
  4. Jinitiator cleaned cache pots customer generating PDF

• E710n-z HP1190C3 printing device does not, but print does not correctly

  I have this HP printer and the 710 in the name indicates that the software has been updated.  It was a 09 prerequisite.  Since the upgrade, I can't print ebay labels with postage for shipping.  Prints the label but the details that make the shipping cost (a small square with wavy in lines) does not print.  I went and deleted my printer and re-installed.  He correctly when printed.  Now, days later, it prints again.  I have two icons in my devices and printers under control panel, 9 and 10.  When the former appears not at all, he takes the role of dominant printer and won't let me change to version 10.  The 10 is simply not available.  When I delete the old 09, I can't print at all.  Help, please!

  Elaine

  Hello

  1. is the issue limited to eBay invoices?

  Method 1:

  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/printer-problems-in-Windows?T1=tab02

  For more information visit this link below,

  I can't print or preview before printing a Web page in Internet Explorer

  http://support.Microsoft.com/kb/973479