HP Deskjet 3050 a Scanner connects to the laptop Toshiba

Similar Questions

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• HP deskjet 3050 J610: printer connected to the router

  How can I connect my printer to my router using an iPad. I downloaded the HP print remote app. I don't have access to the router so can not use the WPS button.

  Hello

  You may not use the iPad to connect your printer to the router. You cannot access your router, then most likely you can not connect. The router comes from your neighbor's House? You must Access the printer or at least you have a computer that is connected to this router. If you want to print, direct wireless can help:

  http://WWW8.HP.com/au/en/campaigns/wireless-printing-Center/wireless-direct.html

  Kind regards.

• HP Deskjet 3050 (J610) - can not find the claim code

  I have a HP Deskjet 3050 J610 Series. I searched the support site of HP and may not know how to configure my ePrint printers. My ePrint printer turned on?

  There is no instructions that correspond to my machine on this site:

  http://support.HP.com/us-en/document/c03550536

  I found a video on the "HP Deskjet 3050 a" but it was very different from the standard 3050. My printer is set up wireless and I am able to print from my Android smartphone, but only if I am connected to the same wireless network.

  I have the impression that with a connected HP account and my claim Code printers, I can print from my smartphone using the Google Cloud from anywhere, I have access to the internet. I can't find my printers claim anywhere Code. I can print the HP Network Configuration Page in the menu on my printers Control Panel wireless, but it looks nothing like the page in the video.

  Thank you in advance.

  Hello

  The series HP Deskjet 3050 (J610) do not support the ePrint and therefore does not claim any code.

  The printer Deskjet 3050 a Series (J611) supports such a, your printer is not.

  You can view this document as a reference, the printer does not support Web Services and only allow printing via the local network:

  http://support.HP.com/us-en/document/c02814760

  Shlomi

• IPad no charging current after the update to IOS 10, when connected to the laptop.

  My Ipad no charging current after the update to IOS 10, when connected to the laptop. But fine load with Bank charger or battery with the same cable brightening.

  PL suggest how to overcome this problem.

  Have a look here If your iPhone, iPad or iPod touch won't charge - Apple Support

• Unable to connect to the laptop, receive error message "the user profile service failed.

  can not connect to the computer

  * original title - I can't connect on the laptop when I put in password says the USER PROFILE SERVICE FAILED THE LAGOON AND DO CAN NOT BE LOADED a *.

  Hi vincentbyrne

  
  What operating system is installed on the computer?

  You can refer to the link below and use the provided steps to identify the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  
  If you are using Windows Vista or Windows 7 based computer you can see Microsoft article provided below and check if the measures help -.

  http://support.Microsoft.com/kb/947215

   

  I hope this helps.

• Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Hello team,

  Does anyone has a software that can give the ip address for any device connected to the laptop, as the Council of access control?

  Thanks for help

  LookAtLAN network monitoring is one of these tools.

  SuperScan is probably better, but I have not tried.

• Wireless cause: the network connection from the laptop to the router, but internet access comes and goes through procedures to 'fix '.

  The Dell laptop I bought is little used, not refurbished a downsizing Corporation.  I bought a refurbished by Cisco, Cisco Linksys router.  I can't stay on the internet for any period of time.  At the time that I open the browser, after the wireless connection, it goes your 'connected' to 'no internet access.  If I go through the diagnosis and fix it, it says I'm connected, but 'no Internet' returns quickly.  It shows a diagram of the connectivity of the laptop to the router but not to the internet router.  I had a second router refurb sent, and it does the same thing.

  This is all new to me (wireless and mobile), so my words my being turned off, but I wonder if it might be the wireless card, or network card (or is it just a different name for the router).  I mean, it's something in the laptop.  If I plug the DSL directly into the laptop, I have a perfect internet connection, so I did not thing is my provider.

  Any help/suggestions appreciated!

  My issue was with the ATT modem not set to fill mode.  modem was not accept what he said was the router.

• Resolution is lower when the monitor is connected to the laptop

  Recently, I knew that my laptop of girlfriends who is a Dell XPS streched to the office and the max resolution is 1280 x 1024, what happened during the night. The resolution used to go up to 1680 x 1050.

  The stretching occurs only when its acer monitor is connected to the laptop. When disconnect us the laptop resolution is up to 1900 x 1200 (finally something like that).

  Operating system is windows 7 x 64.  I have the exact same monitor works fine on a windows Vista on a Dell XPS.

  Anyone know what to do about it?

  
  

  Best regards Sune

  Well, I have the same problem with my lcd... and I discovered that this is due to the ability of the tv... or the screen, your laptop have a high native resolution but perhaps the native resolution of your screen is less than I say 1360 x 768... by that your pc or laptop detects the monitor and adapt to... but this will give you a No 4 k true HD display.

• My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

  My connection to the laptop for Sharp AQUOS HDTV stop work-"not compatible with this signal.

  Hello Bonnie,.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your laptop?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to connection HDTV problem. I will definitely help you.

  This problem may occur because of corrupted device drivers or incorrect device settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  If this does not help, use method 2.

  Method 2:
  Please refer to the suggestions of Aziz N replied on September 8, 2010 and check the issue.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/i-get-a-message-not-compatible-with-this-signal/206d6023-a7a2-4DC9-bc3a-01d382a3acbd

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Epson XP200 not to connect to the laptop. Printer works fine by itself.

  A new Epson XP200 connects to the laptop. Printer works fine by itself.

  From Internet Explorer

  Original title: connection

  Most often when a device does not work, it is because the driver is damaged.  Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• HP deskjet 3050 a cannot connect

  has printers HP deskjet 3050.

  Can't connect wirelessly to... tried all the hp helps but still not working when I enter the ip address in the configuration of the printer

  print report say nothing but good things. Firewall disconnected... gunna lob it out of the window very soon...

  Someone at - it ideas

  See you soon

  Shaun

  Hi shaunuk,

  Follow the instructions in the document below.

  http://support.HP.com/us-en/document/c02722113

• my hp deskjet 3050 will not connect with my apple mac

  My HP deskjet 3050 will only work connected to my Apple Mac, it should work wireless

  Hello Cerges

  You receive any type of error? Try the following article and let me know if you encounter any problems.

  Mac OS x: install the product software for a network connection Wireless (via an Access Point)

  Also, what is the model of your printer?

  How can I find my model number?

• Windows Fax and Scan cannot detect Photosmart C4580 all-in-1 scanner connected to the wireless network

  I have no problem printing or scanning when I connect my C4500 to PC via USB.  When connected via my home wireless router I can print OK but can not scan - it's the same for other users and computers.  Windows Fax and Scan gives me the message 'no scanner found. '  I need to work so that all users on my netwrok home can share the scanner.  I use Windows 7 64-bit.

  Thanks Travis_C (HP).  I actually found the solution just before receiving your answer!  I discovered that, although the Solution Center says it would uninstall the existing files before allowing me to reinstall with the latest version downloaded, it didn't remove all the files.  I only discovered this because the new facility has not taken me through the whole fresh installation procedure, he simply asked me what additional features I wanted to install and asked me if I wanted a local printer or network etc.

  I thought that there must be a mistake or problem with whatever existing files were left and the new facility would not correct it.  So I used the control panel to uninstall the existing files, and I made sure that everything was gone.  I then used the last download to reinstall, this time through the new correct installation procedure, and everything now works perfectly.

  With this method I always had a problem on another PC, giving me the same problem I had before.  I realized that this was due to a USB dongle connected to the PC to a wireless keyboard that seems to affect the installation.  When I removed the dongle installation worked again perfectly, and I now have full printing and scanning ability on all PCs.

  I think the installer for this printer wireless (and perhaps others?) should be updated to solve the problem, and also the center of Solution must be fixed to ensure that if you uninstall the software it should not leave anything.

• DeskJet HP3054A will not connect to the Mac running Yosemite

  The HP Deskjet 3054 lost connection for Mac.  Mac Airport utility assistance and the option WPS on the printer, the printer connects to the network, but when the countdown on the printer control panel reached about 15 seconds, he says "WPS Error" and the wifi of the printer is disabled.  Anyone know why the wifi the printer stops just before filling the countdown?

  Hello @3054AMacUser!

  I don't know what WiFi is turn off until you have completed the Setup, but I have another technique to get the printer on your network. I'm sure you know, a full pilot of features for the Mavericks is not available for your printer, or from the CD supplied with your printer from the HP website.  This document applies to the HP printers supported in versions of Mac OS X 10.6 (Snow Leopard), 10.7 (Lion), 10.8 (Mountain Lion), 10.9 (Mavericks) and 10.10 (Yosemite) with only drivers available via Apple Software Update.

  I can help you put the printer on your network wireless software. I use this method for iPads, iPhones and other devices that have no software.

  1. Restore default network settings on the printer by pressing the wireless button, by going to settings and then restore the default settings. The wireless button should start then flashes, this means that it is now in autowireless mode.
  2. To connect to the network that broadcasts the printer. It is usually HP-setup - 3054a and then a part of the MAC address, or a variant of the name of the printer. Always wireless light will blink on the printer at this stage, which is normal since it is not a real ad-hoc connection.
  3. Load up the built-in webserver (EWS) in the browser of your mobile device. The default IP for autowireless is 192.168.223.1.
  4. Go to the tab network along the top of the SAP.
  5. Click Setup wireless along the left side Assistant to start to set up the printer.

  

  You have now completed the configuration of wireless network, follow the next 3 steps to start printing.

  1. Blue wireless light will be solid, put the Mac on your network.
  2. Add the printer in system preferences.
  3. Print

  Please let me know if that solves the problem. I look forward to hear from you. If this resolves the issue, please make sure you click on the I accept as Solution button below so that others can see what has worked for you.

  Thank you.