HP Deskjet F4135 colors print does not correctly

Similar Questions

• HP jet 7500 a desktop: office jet 7500 a print does not correctly

  Hello
  After you run the print doctor, cleaning and aligning the print heads that it is still print does not correctly. the first page comes out perfect so the print quality gets worse, with bits wilted and things missing. just print a page of print quality and black looks at all and the first steps of pink and yellow are strong, blue stripes and then 2nd very faded pink and yellow bar.
  any ideas?

  Hey watch this video of HP, how do I solve this https://www.youtube.com/watch?v=c422Q-EhMXI if this fixed your problem can you give me a point of congratulations. Thank you

• HP Deskjet F2410: The printer does not print

  I have a problem with my printer after reformatting my PC.

  Product name: HP Deskjet F2410 not

  Operating system: Microsoft Windows 7 (64-bit)

  Drivers and software are already installed.

  I have the new black and color ink cartridges

  When I send command my printer does not print but in the Panel, devices and printers, in "see what's printing", everything is correct written: the Document name, status, Pages, submitted, Port. ""

  Is it possible that my printer has stopped working properly because I changed the operating system from 32 to 64-bit?

  Thanks in advance for answers

  Elena

  Hi @Elena_Kh,

  Welcome to the Forums of HP Support! I see that you have recently formatted your PC running the Windows 7 operating system and now you cannot print to your F2410 not HP's Deskjet.

  I would like you to follow the steps below:

  Please, try disabling your firewall and perform a clean boot. Now, follow the steps below:

  1. disconnect the USB key if you use a direct connection.

  2. remove the software HP Deskjet F2410 not to uninstall from the control panel of your computers an option of the program.

  3. restart the computer.

  4. make sure that all them that software Deskjet F2410 has disappeared from the list of programs, but also your HP folder listed under all programs in your Start Menu.

  5. now, go ahead and download the software and drivers for your Deskjet F2410 (DO NOT connect USB until the software prompts you to):

  HP Deskjet F2400 all-in-One series Full Feature Software and Driver

  6. go ahead and print a test page.

  7. If you are unable to print a test page, please run HP print and Scan Doctor > www.hp.com/go/tools

  -It was designed by HP to offer users troubleshooting and problems of the functionality needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

  Please let me know if it was successful!

  Thank you for being a part of the community of HP. Please let me know if this helps solve the problem by marking this message as "accept as Solution" . If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• HP Deskjet 2540: The printer does not work.

  My printer does not print the page, I am sinking.  Instead it tries to download a page that I tried to download a few days ago and he has yet to recognize the page.  It was an image of the Liberty Bell, so I assumed it was copyrighted and would allow me to print and I rejected the page.  Apparently he is stuck somewhere in the printer and it does not load and therefore does not allow me to print the page that I need now.  How can I get this thing off my storage or my printer?  I watched everything I know to review and check in the printer itself.  I do not know how to remove the application printing the page because I can't find in the computer anywhere.

  If you can help me, I would be very grateful

  Thank you

  Linda Schwartz

  Hi @lindaschwartz,

  Thank you for joining the HP Forums!

  I noticed your post on how you can not print with your printer HP Deskjet 2540. I'm happy to help you!

  Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this will solve your problem!

• DeskJet 1000 J110: Printer does not

  The printer works fine when I told it to print a letter or something else, but it is not displayed in DEVICES AND PRINTERS

  Hi xairman,

  Thanks for getting back to me with the results of your efforts. It is quite strange that the printer does not appear in the devices and printers. This might be a better question on the Microsoft community forum.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

• HP Deskjet 2515: Printer has ink but printing does not correctly

  When printing it prints only "BOLD" colors, but it comes out of light. The words light out even at all. The ink cartridges is half full and even put in new ink cartridges. I Redid the test of ink and a number of other things, but nothing helped. Please help.

  Welcome to the HP community @MaineF,

  I wanted to reach out and try to help you with the problem you are having with your Deskjet 2515 printing with print quality problems. I understand the ink cartridges have sufficient ink levels, and that you have already tried a few troubleshooting.

  Here's the guide I recommend for you: HP Deskjet 2510, 2520 printers - solve print quality problems

  If the quality does not improve, I then and finally suggests contacting HP directly. They can discuss your next printer options, as a replacement or a trade in if they are available.

  Click on the thumb to below testify my help!
  Click on the "accept as Solution" if I'm you guide to a solution!

  Have a great day!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• PDF/X1a with a logo that contains a colorized grayscale tiff print does not correctly

  I have a 3 logo colors: black, SPM 200U and PMS 1955U. The logo was built in Illustrator and I placed ontop of it grayscale tiff. Tiff grayscale is a dashed effect (points) that I have colorized to PMS 1955U in Illustrator, try it hidden on top of the logo and place it to multiply. In Illustrator, separations of good appearance and it prints fine when you print directly from illustrator.

  The problem is when I export to a PDF/x1a and try to print it, it does not print correctly. Printing from acrobat, it only presents a preview and print the PMS 1955U to the dotted line and black. Does not print the flat PMS 200U in the tiff format. I tried bitmapping file photoshop and make that the monochromatic stipple and still doesn't seem to work when you export to PDF and printing.

  Funny, that's when I do the whole process for the logo CMYK (not PMS), it prints fine to a PDF/x1a.

  Any ideas on how to get the logo to export and print correctly?

  Any help is very appreciated!

  Print quality using PDF version 1.4 that supports transparency while PDF/X-1a uses PDF version 1.3 which requires transparency to be flattened.

  For your problem, try to activate the overprint Preview in Acrobat preferences and see that you get the expected results, use the output in Acrobat Preview Panel to turn off individual plate to see if your missing PMS 200U is listed and flat color appears.

  If the foregoing is not works, please send me the files to reproduce this problem at my end, I will send my email in private message for you.

  -Rama

• DeskJet 1512: Deskjet 1512 print does not correctly chosen size

  When I choose to print an A4 photo size the last 1/2 inch is missing from the picture? Lenovo windows 10 laptop running

  Hello

  The Deskjet 1512 does not support printing without such margins listed in the paper handling section:

  http://WWW8.HP.com/us/en/products/printers/product-detail.html?OID=5285093#! tab = specifications

  Minimum bottom margin is 0.57 inch, the material must not exceed these margins that you will find listed in "specifications of paper output > section of the print margins:"

  http://support.HP.com/us-en/product/HP-DeskJet-1510-all-in-one-printer-series/5157551/model/5385180/document/c03775352/

  You will need to resize the print job to supply the printable area, to get a game of margins even the top and bottom of the margins like 0.57 inches.

  Kind regards

  Shlomi

• DeskJet HP 1510 alignment page print does not correctly

  Ive recently bought a series all-in-one printer Deskjet of HP 1510 and Ive got to the stage where I need to align my printhead. However, the alignment page that is being printed is not print entirely - there are no words on the page at all - so I cannot complete the installation of the printer and cannot print anything. How could I solve this problem?

  Hi shansha1,

  First I press the Cancel - button red X (see image below)

  

  I found this document of support which may help. Please click on the link below:

  http://support.HP.com/us-en/product/HP-DeskJet-1510-all-in-one-printer-series/5157551/model/5157552/document/c03800862/

  Scroll down to Solution 6 and follow the steps to print a diagnostic page.

  I hope this helps.

• E710n-z HP1190C3 printing device does not, but print does not correctly

  I have this HP printer and the 710 in the name indicates that the software has been updated.  It was a 09 prerequisite.  Since the upgrade, I can't print ebay labels with postage for shipping.  Prints the label but the details that make the shipping cost (a small square with wavy in lines) does not print.  I went and deleted my printer and re-installed.  He correctly when printed.  Now, days later, it prints again.  I have two icons in my devices and printers under control panel, 9 and 10.  When the former appears not at all, he takes the role of dominant printer and won't let me change to version 10.  The 10 is simply not available.  When I delete the old 09, I can't print at all.  Help, please!

  Elaine

  Hello

  1. is the issue limited to eBay invoices?

  Method 1:

  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/printer-problems-in-Windows?T1=tab02

  For more information visit this link below,

  I can't print or preview before printing a Web page in Internet Explorer

  http://support.Microsoft.com/kb/973479

• HP deskjet 2542: hp printer does not print anything

  Hi, I'm trying to fix my printer with the pc doctor.  When I click on uninstall and reinstall. a message appears that said... install HP is not present.please delete the product by using Add/Remove software. However, when I go into Add Remove I don't know what to uninstall... any help will be appreciated!

  Hello @zeldaq,

  Welcome to the Forums of HP Support!

  I understand you are trying to correct a problem with your HP Deskjet 2542 all-in-One printer on your computer Windows 8.1. I want to help with uninstalling and reinstalling your device. Can I please have gone through you the steps below.

  Step 1: Uninstall the drivers:

  1. Open the display Start by clicking the Windows button in the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key.
  2. Once the splash screen opens, type programs and features
  3. Click on programs and features to run
  4. Once the programs and features opens a list of the programs installed on your computer will populate. Scroll through this list and looking for HP Deskjet 2542 or HP Deskjet 2500. If you see this, click it and choose Uninstall. If you don't see HP Deskjet at all that this indicates that your printer is not currently installed with the package full feature software and driver. If this is the case, simply close this window.

  Step 2: Remove temporary files:

  1. Open the display Start by clicking the Windows button in the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key.
  2. Once the splash screen opens, type run.
  3. Click Run to launch the run dialogue box
  4. In the run box, type %temp% , and then click OK
  5. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
  6. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
  7. Close the Temp folder, once it is empty
  8. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 3: Reinstall printer:

  1. Please click here to download the appropriate drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Allow download to run when prompted
  4. Follow the steps on the screen to reinstall your printer
  5. If you use a USB cable connection do not connect the USB cable until the installation program invites you to

  Once the installation is complete, please test the functions of your printer again to verify that the problems are solved.

  Please reply to this message with the result of your troubleshooting. I look forward to hear from you!

• Want 4500: Brand new Envy 4500 print does not correctly

  I was putting up my printer and first had a problem with the paper, he does not at all, and when he did he chewed upward, until I have somehow fixed that. Now, every time I print something it jumps lines! She does a lot in the project of black and white, not so much in black and white, and color she does that a lot. It is not always do well in the middle part of the paper?

  I tried to make the software audit tool and it said everything was fine, I tried to clean the printer heads and who did not. When I did a test paper of the software that it is going on well except the text was faded.

  Any ideas please help as I am at my wits end as it is brand new!
  Thank you

  Hello, thanks for your answer!

  I found myself on the live support chat and through narrow down realized I had sent a defective empty ink cartridge with the printer. While they sent a replacement free of charge.

• New C310 while a printer does not print does not correctly

  I have a new printer C310.  When I installed the printer, everything worked very well.  I have not used the printer for two days.  Does not now print.  I tried to align the cartridges and it fails.  I followed the instructions to check the cartridges, replace them again in the printer and unplug the printer.  I still can not align cartridges and I just get streaks of color when I print.  Any ideas what to do or should I return the printer.  Not sure why it worked the night fist and now will not.  One last thing, I put various paper and it's recycled paper.  It would make a difference?

  This looks like a firmware issue. It is possible that the firmware update has failed. If you have not given the unit try the following steps:

  Install a firmware update

  Looking for a firmware update that could help solve the problem:

  1. On the product control panel, tap the Setup icon ().
  2. Support on the Web .
  3. Tap the updates .
  4. Touch of the product updates .
  5. Tap Yes to update. The update can take 10 to 20 minutes. Do not turn off the printer until the update is completed. The printer will stop and automatically start up.

  It comes to this document:

  Troubleshooting print quality problems

• DeskJet 970Cxi impressions eject does not correctly

  He pushes paper most of the exit door, so that the printer considers that it has finished and starts printing the next sheet.  But sheet n ° 1 is not far enough to lie flat on the output tray, so something in the works mechanical grabs the back of it and snarls to the top of the next sheet as well.  And so on, so I have to look at the printer like a Hawk and whisk every leaf there at the right time precisely.

  I hear fairly well with mechanical things and feel that it should be simple to put it right, if only I could observe.  But everything happens too fast, in more of course, it will not be printed with the cover open.  The only clue I can see is that the main action of the spin is on one side.

  Everything by moving the printer a year or two before, I made the mistake of putting on his side briefly.  It is the only cause I can think of, although it doesn't seem to affect his performance (once I had cleaned the ink off everything!).  Recently started paper supply problem.

  I bought a new printer to use when I need high quality images, as I work with them and need the settings that the printer Deskjet does not more (as I now have Vista).  But I do a lot of writing too and hoped to operate using my Deskjet nice, reliable as a workhorse for the text (and images of basic, every day).

  Hello

  This article should cover the problem you are experiencing. Give the steps described a shot and tell us if it helps.

  Good luck!

• HP 2640 series Deskjet printers: the printer does not

  Dear Sir.

  I have printer HP Deskjet 2640 series, n ° S.

  CN3AH2GHGV0601. My printer is not working as it is reported as

  Brother DCP-116C. How to connect the printer to the right? How

  reset the settings as well from fax in order to make the printer & send fax functional?

  Kind regards

  Devinder Kumar.

  Hello

  Download and run the utility HP Print and Scan Dr. link below to solve the problem.

  www.HP.com/go/Tools