DeskJet 970Cxi impressions eject does not correctly

Similar Questions

• disc eject does not correctly persist

  I get several error messages that my external hard drive was not ejected correctly. I ejected it, turned off, unplugged and then reverse the process. Whenever my screen locks when I open it there are several messages not eject disks does not correctly.

  Restart your Mac, and then drag the disc on the desktop for the external drive to the trash.

• HP Deskjet F4135 colors print does not correctly

  When I go to print a word document, my colors do not print the correct colors.  that is purple print Green - Green print blue, etc.

  How can I fix this problem?  If I print a coupon from a web page, all the colors are correct.  If I print pictures, they too are the wrong color.

  I reinstalled my printer disk and I also have a new cartridge color printed and aligned my color correctly test page.   Help!

  Try to print a self-test page by pressing the arrow and the color copy button at the same time. You see all the colors here?

• with firefox 43 yahoo and yahoo mail doesn't work does not correctly

  With the help of win 7 and firefox 43.0.1, I have 4 computers and now all have problems with yahoo and yahoo mail doesn't work does not correctly. Loading sites, but most of the features are missing and clicking on what whether changes to the lists of text. I have disabled flash / anti-spam etc., cleared cookies and cache and even firefox loaded down once again and have upgraded, no help. I'm forced to use IE now.

  I tried Yahoo support, they said try Firefox... In any case, it's Firefox and I found a solution using the 'Refresh Firefox' button. Whatever the problem was fixed on two of my computers so far. Got to update my setting again but it's 10 m, compared to the 10 hours I spent trying all that is nothing.

  Thanks for the help!

• HP jet 7500 a desktop: office jet 7500 a print does not correctly

  Hello
  After you run the print doctor, cleaning and aligning the print heads that it is still print does not correctly. the first page comes out perfect so the print quality gets worse, with bits wilted and things missing. just print a page of print quality and black looks at all and the first steps of pink and yellow are strong, blue stripes and then 2nd very faded pink and yellow bar.
  any ideas?

  Hey watch this video of HP, how do I solve this https://www.youtube.com/watch?v=c422Q-EhMXI if this fixed your problem can you give me a point of congratulations. Thank you

• I have an index page that does not correctly load the css and css works on all other pages of the site.

  http://www.boulderridgecondos.com/ does not correctly load the css, but all other pages of the site loading the css correctly. There is nothing (that I can identify) between pages.
  http://www.boulderridgecondos.com/news.htm

  I guess something is wrong in the css, I inherited this site and have exceeded the css but can't find a problem that would cause this to happen.

  Any help or suggestion looking for something would be appreciated.

  This page is saved in UTF-16 format (Content-Type: text/html (UTF-16 BOM, litte-endian)) in your text editor. The CSS file is sent as ISO-8859-1. Firefox fun to see all the files in the same encoding. The other pages are send as ISO-8859-1 and so use the CSS file. You will need to re - save this page as ISO-8859-1 and download the corrected version.

• Satellite Pro L300: DVD drive eject does not & recognizes not all disks

  Satellite Pro L300 dvd player eject does not and does not recognize the disc that sits in.

  Please help someone,

  Thank you very much.

  What kind of help do you expect?

  You mean he s a software problem?

  I doubt it because it sounds like a mechanical hardware problem and in this case, the disk must be replaced.

  The laptop seems to be is not very old, and I think that the guarantee must be valid
  How about you, communicating with ASP in your country and ask for a replacement WEIRD?

  I think this helps

• Satellite A200 does not correctly reduce or increase the volume

  Hello

  Our Satellite A200 is having problems with its Volume control wheel.
  If I turn the wheel (on the left or in the past), it does not correctly to reduce or increase the volume level.
  He jumps rather the volume level in seemingly random directions (with a preference for the volume).
  Turn the wheel slowly improves responsiveness a little, but it remains quite impossible to increase or decrease the volume control that to be.

  BTW, I am well aware that the volume control wheel is a wheel of puls-encoder rather than ye olde potentiometer.

  -Can anyone you tell me where I can find the configuration that is responsible for this Volume control wheel?
  -Which driver/firmware is attached to the order of the volume control?
  -How can I determine if this is a hardware or software problem?

  Advice would be welcome.

  Stephan

  Hello

  There is no software or hardware problem.
  It is a new generation of volume control.

  First of all there is no mechanical limit turning right or left.
  In addition, this volume controller works a little different than the old volume controllers. The volume can be increased and decreased using the fixed rate

  By the way;
  > Can someone tell me where I can find the configuration that is responsible for this Volume control wheel?
  You can change the volume as in the sound settings that could be found in the control panel.
  > Which driver/firmware is attached to the order of the volume control?
  Audio driver controls the volume controller.
  > How can I determine if this is a hardware or software problem?
  There is no problem

• error code 259 does not correctly updated to sp62736.

  I have a Hp Pavilion 500-141ea im trying to update the IDT audio driver for windows 8, I supported SP sp62736, it passes through the installation procedure, then it stops and comes up with this error code 259 does not correctly updated, I even disabled etc still the same antivirus software.

  Any idea?

  Hi Apache1968,

  If everything works at the moment, with the exception of downloading then I would leave it as it is. The whole "don't mess with what works" thing.

  Thank you

• HP Deskjet Ink Advantage 2545: HP Deskjet Ink Advantage 2545 does not print Cyrillic

  Hi all

  My HP Deskjet Ink Adnavtage 2545 does not print Cyrillic characters, for example: България. I installed the latest drivers from the link below, but the problem persists: http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-Ink-Advantage-2540-All-in-One-Printer-ser...

  I will be grateful if you help me to solve this problem.

  Hello

  I called the support in Bulgaria, but the cause has not yet been identified. :-(

  Update (10/03/2015): the problem was caused by the original-black cartridge - which came with the printer. It has been cleaned and now everything works fine.

• Why is one of my 4 5893 Modules doesn't work does not correctly?

  Hello

  This is the configuration of my HW and SW:

  LabView 2013 SP1

  1 x cRIO 9076

  4 x NI 9853 CAN Modules

  CAN0 - 1000 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  CAN1 - 500 Kbps, entry timeout = 0, OutputTimeOut = 10000, Module clock: 20 MHz

  I worked on a program for a test system, where each Module 9853 control two devices (CAN0 and CAN1), the same type of systems is controlled by other 9853 3 Modules in parallel.

  So basically, I use exactly the same functions for each module. So far, everything has worked correctly on module 1, but now that I started to test all other modules I have the problem that Module 3/CAN0 does not correctly read the information.

  While watching the FPGA façade, I see that each 10000ms one value is read, but only on that ONE module (frames are sent every 1ms from my unit)

  I tested the HW itself using the included examples and it works correctly, the only difference is that the example used only 2 Modules, one to send data and the other to receive it.

  I included my FPGA program as an image, I really don't think there is a problem with my RT SW, because all the other modules are working properly. Basically, my SW FPGA bed CAN Modules and puts the information in a FIFO, if there is an error (no information), it will make a loop once more and check again.

  Thanks for your help

  I solved the problem, it was an error of configuration on my side.

  The entry for Module3 CAN1 time-out was set up NOT as 0ms and 10000ms as I thought! , so that was my reading for DUT3 loop run only every 10000ms.

• Update KB976902 now the mouse doesn't work does not correctly

  I had the KB976902 recently updated on 2 of the 3 computers and 2 who got now have a mouse that does not correctly.  The computer number 3 does not have the update and still works fine.  All three are almost identical hardware and software and have legitimate versions of windows 7.

  The problem of the mouse made play almost almost impossible. Left click crashes, lag mouse click one or two times when I I try to do a restore from the left eventually drag a shortcut of the thing, I clicked on and don't know how or why.

  I did a restore on a single computer, but it did not help.

  Norton and McAfee applications are notorious for not to uninstall (or upgraded) themselves. Since you are not sure, I'll have to have executed two removal on all of the computers in question tools.

  NB: If a step said to reboot, reboot!

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file saved in # 1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  3B. right-click on the file saved in # 1 b above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open Internet Explorer 32-bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Acer site does not correctly display the specification.

  Acer site does not correctly display the specification.

  Example when you click on the link on M5 Explorer - 581 T-6405 please as to the specification of the model of S7-191-6447. Please check

  Thank you bring to our attention. We will ensure that it is transmitted.

• My computer does not correctly display web pages?

  On some web pages the boxes are stacked, for example on the MSN homepage ads pop up in the left corner of the screen on the top of the page instead of on the right side, and on the right hand side where they should be it's an empty box? Other pages display does not correctly? I don't know how to fix this or why it happened?

  Hi ChristineDupre,

  1. what browser do you use?

  2. don't you make changes on your computer before this problem?

  If you use Internet Explorer, you can follow these methods & check if it helps.

  
  Method 1

  You can follow this link and check if the problem persists.

  Some sites Web may not behave as expected in Internet Explorer

  
  Method 2

  If you have Internet explorer 9 installed, please follow this link.

  Web pages displayed incorrectly in Internet Explorer 9

  Hope the helps of information.
  Please post back and we do know.

• My ipod does not correctly install when I plugged in now mobile USB keeps freezing

  My ipod does not correctly install when I plugged it into USB. Since then, my laptop keeps freezing / crashing.  Start repair found the problem mentioned but could not fix it and just send an error report.

  I tried restoring the system and installed the updates of windows, but I still have the problem. I reinstalled itunes and my AV is up to date, I can't find a solution.

  Hello

  1. are you confronted this question all the time or only when using the IPOD?

  2. What is the brand and model of the computer?

  3 Please, try to connect the Ipod to different USB ports in the back and the front of the tower and check if you face the same problem.

  Please follow the links below to solve the problem.
   
  Method 1
   
  Start your computer in a clean boot and check for conflicts with third-party software.
   
  Start your computer in a clean boot.

  
  http://support.Microsoft.com/kb/929135
   
  Note: Please follow step 7 of the article mentioned below to start the computer normally, after completing the necessary troubleshooting.
   
  Method 2

  Step 1

  What is safe mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-safe-mode

  Step 2

  Install this update and check if the problem is resolved.

  Update for Windows Vista (KB925528)
  
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=620

  Also try to update the latest version of the drivers your controllers USB host, on the manufacturers site.

  I hope this helps.