HP device manager 4.6 SP4 device mass rename

Similar Questions

• Device Manager is showing "Other devices - Mass Storage Controller" as having no driver installed

  I noticed since I put Windows 7 on my laptop, the Device Manager is showing under 'Other devices' "mass storage controller" has no driver installed and has the famous yellow triangle and an exclamation point. I have a gateway MX6920, if this is of any help.

  Too bad.  I found the solution.

  In the case where you did not, go to:

  http://support.gateway.com/support/drivers/GetFile.asp?ID=21836&UID=290679

  Download driver, nav for cabins (location listed in the included readme file) folder, right-click the setup.exe and "compatibility test".  Go through the wizard and select the option "he worked directly with Windows XP SP2" and it should install with this compatibility.  My SD card reader just read my transflash Reader which contained my my Droid microSD card.  It's all good now.

• Impossible to install any device mass storage

  Hello

  I recently tried to copy data from a Flash drive to my PC. However, I have a lot of trouble with it.
  So I went and bought another one, but I still get the same problem. I also tried a drive external HARD, same problem here too.

  My problem is the following:
  When I connect mass storage devices to my PC the Hardware Wizard comes up and starts looking for readers, but it's never finds one and therefor does not install the mass storage device.
  Mass storage devices are working on other PC, my own friends.

  I've already updated Windows and I already deleted the USB and storage devices of mass from Device Manager if they are resettled. Unfortunately, none of the actions succeeded.

  I use a PC Pentium Dual Core, I bought around 2006. I use Windows XP Home Edition SP3.

  I hope someone can help me.

  Thank you for your time and your help.

  Hello

  Remove hidden devices by following steps:

  a. click view under view hidden devices

  b. expand all winks in Device Manager

  c. There will be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer restart the computer.

  2. you can also run the store and check out them below the results: hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems

• USB device mass storage 10 - Cont error code

  Sorry, I don't know how to continue my previous question, so I paste below the previous question and Gerry's response:

  Thanks for the reply of Gerry. As Gerry susgested, I saved a copy of the information in the system from my computer on OneDrive: https://onedrive.live.com/redir?resid=726A7FEFBD5F1CD3! 106 & authkey =! AMZZ0M3BTwlvxx4 & ithint = the file % 2ctxt.  I do not know how to analyze it, so I need help. According to the information on my computer system information that I have provided, there can someone show me what to do to solve my problem?

  Concerning

  Leo MS

  My problem is:

  I do not have the new device connected to my computer, but there is a warning on the 'USB Mass Storage Device' Device Manager as USB controller. In fact no problem when I attached all my computer USB storage, it can still read file in there. This problem makes my computer need a lot of time to boot. Even if I disable your device (which has a warning about it) my computer need even more time to start. I tried all efforts:

  1. I tried to update the driver of the device, we want to, but it did not work.

  2. I uninstalled all USB controller devices, but it did not work.

  3. I tried 'MicrosoftFixit' tool, but it didn't work.

  Is it possible to fix this error? What happened to my computer? I need help.

  Best regards

  Leo MS

  It is Gerry's response

  To solve most computer problems, it allows to watch the evidence available in the system information file and Event Viewer logs. An experienced eye can choose needles in a haystack and see more clearly the precise nature of the problem or problems. Newspapers aren't necessary for your specific problem observer of events.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  I hope this helps.

  Gerry
  Stourport, England

  Enquire the execution Plan

  Hi Leo,

  Thanks for the reply.

  Since it is a duplicate thread, you can continue to solve the problem in your previous post and you can refer to this section of the faq for more information on how to post a reply in the thread.

  Community Microsoft frequently asked Questions

  http://answers.Microsoft.com/en-us/page/FAQ

  Hope this information helps.

• Driver of HP Officejet 6500 device mass storge

  need to download usbstor.sys for my HP Officejet 6500, which has been corrupted

  She asks that I reinstall the device driver, but I have to do this several times without attempterd sucsess. It seems to be a delete and reinstall/error loop.  I have a screenshot of the error.

  1. "There is a problem with the driver for the USB mass storage device. Reinstall the driver may resolve this issue. »

  The error is the emblem of prudence in the heart Control Panel / hardware and sound / printer / devices and printers.

  HP Officejet 6500 709 a.

  While I was typing this message response I actually saw it attaches... LMAO

  Awesome!

  E

• Lg p925 device does not appear on my computer as a device mass storge

  USB downloaded and installed the device drivers and LG support software tool.

  Hello

  1. which version of the operating system are you using?

  2. the phone was detected earlier?

  3. have you checked the unit on different USB ports?

  If you cannot use the device, then I suggest that you follow the steps mentioned below:

  Method 1: Run the fixit

  See the following site:

  Hardware devices do not work or are not detected in Windows

  http://support.microsoft.com/mats/hardware_device_problems/en-us.

  Method 2: Install the latest driver

  Download and install the latest driver and other software on the LG site mentioned below:

  http://www.lg.com/us/support-mobile/lg-P925.

• Media management to Smartphones blackBerry with mass storage Mode off

  I just updated my 6.0.0.40 desktop software.  Roxio Media Manager is there no more.  For most of you, it's perhaps a blessing.  But my server company forced the mass storage mode to turn off.  For all its faults and quirks, Roxio was the only way I could transfer multimedia files to and from my handheld.  And now it's gone!

  Two questions for gurus:

  (1) is there one other than Roxio way to transfer media files to and from your handheld with the mass storage mode?

  (2) what is the latest version of Desktop Manager which includes Roxio?

  Hello.

  Not really a guru, but the answers to your questions below are:

  1 n °

  2 5.0.1 and you can download throrugh the Desktop Manager software support link.

• Help the mass renaming 100 + subfolders so that I can transfer them in a single folder

  I loaded by pulling a certain file of 100 + files on our shared drive companies. I am able to get via the * symbol and find every folder because they are all named the same (legal). I would like to copy every single legal folder and paste them inside my personal hard drive, but to do this, they all have to rename. I tried to rename by adding one (1) at the end of the first of the few, I chose to cascade and rename files, but renamed it all the "legal (1).

  Is it possible for me to mass copy and paste without having to rename all? Or how can I rename a ton of files that are stored in different folders, but can be assembled by a * search?

  I hope this makes sense, I do not put too much effort in explaining.

  Thank you

  If I understand you correctly, windows Explorer will do that for you

  (1) in windows explore find the name of the folder.

  (2) you will then get a list of all records that gave the name of folder

  (3) select all (Ctrl + A) or, if you do not hold down the CTRL key and click on those that you want.

  4) press Ctrl-c.

  5) navigate to the destination folder/drive and press Ctrl + V

  (6) a box warning of file name conflicts

  (7) click on keep files and ticks of the do this for all conflicts of 100.

  8) click Ok, you will get the name of the folder, the name of folder (2), the name of folder (3)... name of the folder (100)

  Let us know if you are successful, or if I have misunderstood.

• Satellite A200-1 has 9 (PSAE0): 3 yellow dots in the device under Win XP Manager

  I can not use Vista, as most of my apps does not work. Back to XP Pro OK and added the drivers for Audio, Ethernet, video OK - only have 3 yellow dots in controller of N/W now - device mass storage, the Device Manager (although it works OK) and SM bus controller. Any ideas on solving them?

  More big prob using FN keys especially for the display that I use a projector a lot of switching (F5). Could use the FN + F5 to switch to video ext but it will switch back until the reboot. Following the advice on this Forum installed to control drivers of and Hotkey Utility. What made it worse-, it can not pass again to display Ext. uninstalled the control and shortcut key via Control Panel but cannot uninstall the drivers of control - still cannot change the display.

  (a) how can I remove control drivers so at least get some features (without having to reinstall XP)
  (b) what is the real fix for this problem?

  It is no possible to ask Toshiba support directly (or at least I can't find it on their website rather tortuous!)

  Someone, somewhere, I need to know what I can do!

  Hello

  Have you downloaded and used all the XP drivers available from the European pilot of Toshiba page?
  On this page, you will be able to find all of the necessary XP drivers and installation instructions.
  Please refer to installation instructions!

  Did you also install utility Intel chipset available on the Toshiba driver?
  Please do it!

  Good bye

• Can I have the Profile Manager uses the name of the device used when the placement of placeholders?

  Can I have the Profile Manager uses the name of the device used when the placement of placeholders? Currently, all get renamed 'iPad' when the device through DEP configuration.

  No, but

  I was putting new devices in groups of temporary devices and renaming in bulk, once they are configured for the user, by using user variables / unit...

  The other annoying problem would be the user modifies the device name when they connect it iTunes...

  • the %destinataire% email - address email (the EMailAddress attribute)
  • first_name % - first name (FirstName attribute)
  • full_name % - full name (attribute RealName)
  • % of guid guid (GeneratedID attribute)
  • last_name % - last name (the LastName attribute)
  • the title of the post (the JobTitle attribute) %

  -% mobile_phone % the number of mobile (laptop attribute)

  • short_name % name run (the RecordName, generally the name of the account attribute)

  The variables of the unit are:

  • % BuildVersion % - full OS version on the device
  • ICCID % - ICCID (from the SIM card)
  • IMEI % - IMEI (International Mobile Equipment Identity)
  • OSVersion % - common version number of the operating system of the device
  • ProductName % - name of the product
  • SerialNumber % - serial number
  • % WIFIMAC %-MAC address of the WiFi interface

• My Celler mass storage device will not work on Windows 7

  I have a storage device mass of Celler that has always worked with several computers, now on Windows7 home premium 64-bit, that it says it can't find the drivers. I had Windows search for drivers, but the attempt failed. All solutions? It's most basic 2.0 mass storage device.

  Contact the manufacturer of the device on the drivers for it.

  The manufacturer has written drivers for their products, not Microsoft.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  http://www.SevenForums.com/tutorials/316-compatibility-mode.html

  How to run a program in Compatibility Mode in Windows 7 is at the link above.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forums.

  There is a list of the Windows 7 Forums at the link above to help you.

  You get the help you need there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• What is the best/better way to reenumerate USB ports from a script? I need to emulate the same enumeration that occurs when a USB device is either plugged or unglugged to a USB port.

  I'm working on a network to restrict access to the ISSO role USB mass storage, only. Management wants to access USB Mass Storage for ISSOs on all workstations while blocking access to USB mass storage to all others... on all the workstations. They also want to that USB ports remain available for everything except Mass Storage.

  There are many ways to do it, but the only 'reliable' method, I found so far is to point the HKLM\System\CurrentControlSet\Services\UBSSTOR\ImagePath key to some fake file to block ports and rename it back to access it again.

  To do this, I need to do things more two 2...

  1. make sure that the ImagePath key always has the false value at startup, and

  2. create a login script that affects the ImagePath value when a member of the ISSO group connects... and reset it when they log off.

  Which meet the requirements of the direction if only it worked! The problem is that USB devices must be listed again to re-read the ImagePath registry key after each change. Reconnect the device will do, but it would be unwise to rely on a user to restrict access (fox/Coop).

  The following Microsoft KB seems to be the way to go, but we do not have compilers on the network...

  http://support.Microsoft.com/kb/259695

  I know that this hack to the system is not the most elegant, but I'm just trying to make the management happy.

  Nobody knows...

  1. any (more elegant) way to meet the specified requirement, or

  2. a way to re - enumerate USB devices from a script.

  Thank you! ... Todd

  Hi Todd,

  The issue of Windows XP, you have posted is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Message from blackBerry Smartphones: MTP Device Mode is enabled on

  I just did a hard reset (remove battery) on my Storm2 9550.  When it finished start, I started the Desktop software and connected the phone via the USB port.  I received the following message:

  This Blackberry device using a connection of the PSG.  Some features of media for your device mass storage mode, which interrupts all active media transfer protocol (MTP) connections.  You want to mass storage mode?

  I don't know exactly what that means or if I should answer 'Yes' or 'no '.  (I had a bit of luck you are looking for this particular online message).

  The BlackBerry Storm smartphone can connect to a computer in one of the following ways:

  • USB mass storage mode
  • Media Transfer Protocol (MTP)

  MTP allows a BlackBerry smartphone user transfer media files between a computer and a BlackBerry smartphone and provides support for multimedia files that have specific requirements, such as restrictions associated with the management of digital rights (DRM) technologies.

  A BlackBerry smartphone appears as a Portable device in my computer when connected to the computer using the PSG. It does not appear in the devices with removable storage section and has not assigned a drive letter.

• New configuration of the HDR-cx230. MTP device, Windows XP not recognize or find driver?

  Title about sums it up. New cx230. Cannot get computer to recognize for installation or download?

  The ' new material, found MTP device "seems to be a problem going on, but none of the solutions online offered a solution THST worked.

  Thank you

  Pat

  Found the answer in another question. Had to put the recorder "device mass storage.

  Thank you

  Pat

• Remove unused devices to LabVIEW

  Hello

  I have an application that I developed and we met an interesting problem.

  We use a USB DAQ device.  If we have 2 USB data acquisition devices, disconnect 1 and plug in the new the new device USB gets installed and identified as 'Dev2' is the default response of the DAQmx driver.  However, this creates a problem for our application, because our 'Dev1' now disconnected hardware DAQ reference address.

  So how ensure that ensure that when a device is disconnected it is removed from the Driver?  Is there a way when I bring my application in LabVIEW, I can remove the devices and rename the device connected to 'Dev1 '.

  Any help would be appreciated.

  Thank you

  Dan

  Hi Dan,.

  For now, he is not a programmatic way to delete individual DAQmx devices, but you can use the Configuration API of the system OR to import a configuration of MAX mode 'replace' to remove all disconnected DAQmx devices (and renamed it your connected devices, too). There is an example of how to do this in \examples\nisyscfg\Import MAX Configuration.vi.

  You can rename individual devices using the Configuration API of the system NOR. An example of this is in \examples\nisyscfg\Rename Aliases.vi.

  There's something somewhat related to the exchange of idea DAQ: available by type instead of DAQ hardware device number

  Brad