HP DL360 Gen 8 - supported in ESXi 5.1 U1?

Similar Questions

• SQL Server 2008 R2 taken Failover Cluster support in ESXi 6?

  Hi guys

  I think that it is based on the many articles of MS and VMWare I was wading in but did anyone have knowledge if a SQL Server 2008 R2 failover cluster is supported on ESXi 6?

  I think we have to run on a Windows Server 2012 R2 operating system unless we are forced to stick with Server 2008 R2 for reasons of inheritance

  Thanks for the tips

  Simon

  Yes, have a look here: VMware KB: Microsoft Clustering on VMware vSphere: guidelines for supported configurations

• NIC not supported in ESXi 5.0 U1 and ESXi 5.0

  Hi all

  I got new system for my virtualization vmware lab, but I got an error THAT NIC is not supported with ESXi.

  My system configuraiton is as below:

  Dell Optiplex 990
  Intel (r) Core i5-2500 3.30 GHz 3.30 GHz CPU
  RAM: 4 GB

  What NIC should I buy that is readily available in the market?

  Thank you

  SS

  Hello

  Realtek NIC supported edge in vSphere 5 for the time and compared to other products, they are the least expensive One.

  Realtek 8168
  Realtek 8169
  8111E Realtek

  See more compatible hardware on vm - Help.com

• Physical serial ports are supported in ESXi?

  Physical serial ports are supported in ESXi?  I install Windows 2008 SBS on a HP Proliant ML350 G6 ESXi (version of stick USB HP) running. The server comes with a serial port on board.  I was hoping that connect an external modem and expose it to the virtual server, Windows SBS 2008 to serve as a network fax.  Is this possible? Alternatives if not supported?

  It would be a no.

  There are TCP/IP USB devices, do not know if there are similar devices for the series, but NO physical devices, sound cards, usb, parallel, series can be transmitted to a virtual machine.  That's because ESX uses vmotion, and it was designed to let the virtual machine move between machines, so allowing physical connections so would interfere with this operation.

  http://www.tacticalsoftware.com/products/dialoutez.htm

  However, who should be a solution for you.

• Cisco ACS 5.4 is supported on ESXi 5.5?

  Hello

  We modernize Cisco ACS to version 5.4, but the only available platform VMWare's ESXi version 5.5. The docs to install ACS indicates that version 5.0 and 5.1 are the only supported versions. Does anyone know if version 5.5 is supported too?

  Thank you :-)

  It is supported in 5.6 ACS:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_control_system/5-6/release/notes/acs_56_rn.html#78689

  Support for virtual environments 5.6 ACS supports the following versions of VMware: VMware ESXi 5.0 VMware ESXi 5.0 Update 2 VMware ESXi 5.1 VMware ESXi 5.5 VMware ESXi 5.5 Update 1

• My supported if ESXi VMware inside my VMs tools are outdated?

  Hello

  One of my customers like to install a new cluster on ESXi 5.1.0u1 and migrate virtual machines in a cluster on the cluster 5.10u1 5.0. But it does not update the VMware tools (in the first place).

  He asked me if the ESXi 5.1.0u1 servers are always supported by VMware if VMware tools running are obsolete.

  For me, Yes, but I can't find an article/paper which can confirm.

  Can someone tell where I can find an official statement about this?

  Thanks in advance.

  Frédéric

  It is supported VMware product interoperability matrices to check

• vCenter 5.1.0b does not support vSphere ESXi 5.0.0?

  I came across a weird error today at work.

  Immediately after installing vCenter 5.1.0b, I tried to add a host to a data center newly created ESXi 5.0.0.

  I met an error that said, vCenter does not support the hosts of this type.

  I thought, really?  The compatibility matrix says it does.

  At this time, I left for the day and will answer on Monday.

  In the meantime, is someone met such a mistake?

  vCenter... can't stand the hosts of this type.

  Could you please provide the exact error message!

  At what stage of the wizard have "Add host" you received the error message?

  How the host is currently allowed? With the free license of the hypervisor?

  André

• Mac OS x 10.8 support for ESXi 5.1

  Hello world

  Looking at the notes of relase for the 5.1 ESXi update, looks like I can install MAC OSX 10.8 on ESXi now. I followed the instructions below vmware site

  http://PartnerWeb.VMware.com/GOSIG/MacOSX_10_8.html

  Now installing crosses very well until he needs to reboot once done. The first error I get in the vmware.log file is a. vcpu0 - hostsmcread could not open the playerlooking for answers in the world, I decided to change the input .vmx as follows: smc.present = false

  Starting the virtual machine back up I now get this error: GuestRpcSendTimedOut: message to the box to tools-DND expired

  No idea what I should try. It also looks like his tent install VMware Tools.

  Also, I wanted to know about licenses. Im not clear if I'm reached unrestricted license trying to run MAX OSX on ESXI. There was some talk everything through forums, I wanted just to have a clear answer

  Any help on these questions would be appreciated

  Hi DForneiro,

  If you get an error in HostSmcRead, I would hazard a guess that you run ESX host non-Apple machine.  Apple Mac OS X to support software license conditions require that the OS runs at the top of the Apple hardware, even when virtualized.  We rely on specific Apple hardware on the host computer in order to activate virtual machines in Mac OS virtualization, so if it is not a host of Apple, Mac OS X does not start.  A failure in HostSmcRead means that we were unable to communicate with the hardware required host.

  If you are using host of Apple hardware, I'd be interested to know the details, because the failure you see would be something that we want to determine and fix... Otherwise, what you are not allowed by the Apple ALS and we will not be able to help you here.

  See you soon,.

  --

  Darius

• Support in ESXi 5 cassette player

  VMware took support to fix a tape to an ESXi host drive and run a virtual machine with the tape drive set up?   http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & docTypeID = DT_KB_1_1 & externalId = 1016407

  The tape library features and backup together with VMware ESX/ESXi software are supported partner.

  VMware ESXi supports the scsi tape drive but its a supported and validated by the seller, VMware doesn't validate.

  If you look at the KB to say like that, and if you look at the page "vsphere-esxi-vcenter-server-50-storage-guide" guide 35 its said that FC connected conical discs are not supported but scsi tape drives connected are still supported.

  For more information, I suggest you open a request and deal with VMware.

• copy the vm-support journal ESXi host bundle

  Can anyone suggest a way for me to make the beam of vm-support of an ESXi 4.0 Update 3 host? We don't allow SSH on our hosts for SCP and Veeam FastSCP came out. I tried several PowerCLI remote CLI commands and vMA and nothing seem to work. Any suggestions?

  We create the bundle in unsupported mode and it seems to store the .tgz under/var/usr file but I do not see the file when I navigate to the folder on the vMA. I guess it is because another user (root) creates the beam and I am connected at VMAs with vi-admin.

  When I run the command vifs.pl: alive < connection_options > g ' VM/VM.txt [StorageName]. "
  Z 'ha-datacenter""tmp/backup/VM.txt. "

  RCLI file cannot be located

  When I run:

  Get-Host HostNameOrIP | Get-Log -Bundle -DestinationPath c:\Storage\Location\

   

  with Powercli I get the following error:

   

  Get-Host: A positional parameter cannot be found by accepting the argument ' *. **
  .**.**'.
  Online: 1 character: 9
  + Get-Host < < < < *. **. **. ** | Get-Log-Bundle - Destination c:\
  + CategoryInfo: InvalidArgument: (:)) [Get-Host], ParameterBindin)
  gException
  + FullyQualifiedErrorId: PositionalParameterNotFound, Microsoft.PowerShell
  . Commands.GetHostCommand

  (I replaced the IP with * for reasons of confidentiality)

  Allows SSH really my ONLY option?

  Your partition you want to pull the bundle of newspaper are there enough space? Sometimes, the size of the file for this could be huge. To check the free space on the Service Console, use "vdf h", the v includes VMFS, while "df-h" excludes VMFS.

  So you might want to change the location where empty you these files.

  You can also manually run vm-support - w/vmfs/volume/guid. Where guid is the guid a volume with a lot of space.

  /etc/opt/VMware/vpxa/vpxa.cfg will actually show you where your logs are generated by default, and the number of files you have. Try to move / backup the files in/usr/lib/vmware/hostd/docroot/downloads. This contains all the files in package old newspapers. This should free up space to run the command vm-support.

  And Yes, you can try to activate SSH to see if that helps too.

  I hope this helps.

  Clement

• not supported for ESXi 4 NIC... Can I simply add a NETWORK card?

  Maybe it's painfully obvious, but I don't want to assume anything.  I tried to install ESXi 4u1 this morning on a machine just to see if it would work, and I have not reported any supported network cards.  Can I buy a NETWORK card support and then ESXi 4 will work?  Is it really as simple as that, or is there some other stuff that I'm not aware of?

  Scott

  Hope yo don't mind to mark this as an answer...

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• 8 support on ESXi 4 vCPU?

  Hello Alls,

  For the new version of ESXi 4. is it supports 8vCPU for 1 VM? (I mean if I have server physical quard core 2Cpus)

  and for the server with physical 2CPUs on ESXi4 how to create VMS on for secondary physical CPU used?

  Best regards, B-)

  Bancha

  Yes... and it's ONLY for your ESXi host, has NOTHING to do with your guests.  You can always just give your 4vCPU max guests, no matter how sockets or licenses of socket you have.

• Creating a model not supported on ESXi?

  Hello.

  I am trying to create a model of a new Ubuntu installation. I use VMware VI Toolkit for Windows 1.0 build 113525. My server is VMware ESX Server 3i, 3.5.0 123629.

  First of all, I have tried different variations of new-model, but failed. EU from the mistakes of

  PS \VMware\Infrastructure\VIToolkitForWindows C:\Program Files (x 86) & gt;  new model - VM (vm-get-name Ubuntu64-model) - name Ubuntu64template

  New-model: Value is found for the required Location parameter

  Online: 1 character: 14

  ++ new model & lt; & lt; & lt; & lt; -VM (get-vm-name Ubuntu64-model) - name Ubuntu64template +.

  and

  PS \VMware\Infrastructure\VIToolkitForWindows C:\Program Files (x 86) & gt;  new model - VM (vm-get-name Ubuntu64-model) - name Ubuntu64template - locati

  on (get-file-name "vm")

  New-model: 2009-01-24 21:16:28 5268e87a-951c-f95a-166b-c5cde7c72260 New-model, the operation is not supported on the object.

  Online: 1 character: 14

  ++ new model & lt; & lt; & lt; & lt; -VM (get-vm-name Ubuntu64-model) - name Ubuntu64template-location (get-file-name "vm") +.

  and

  PS \VMware\Infrastructure\VIToolkitForWindows C:\Program Files (x 86) & gt;  new model - VM (vm-get-name Ubuntu64-model) - name Ubuntu64template - Locati

  on (get-data store)

  New-model: cannot bind parameter 'rental '. Cannot convert the 'storage' to 'VMware.VimAutomation.Types.VIContainer '.

  At line: 1 char: 84

  ++ new-template - VM (vm-get-name Ubuntu64-model) - name Ubuntu64template-location & lt; & lt; & lt; & lt; (get-datastore) +.

  http://communities.vmware.com/message/879931#879931 mentions that there is a bug in the beta version, but has it been fixed in 113525?

  I found the discussion at http://communities.VMware.com/message/1114905#1114905 and tried the following:

  PS C:\ & gt; $vm = get - vm "Ubuntu64-template | Get-opinion

  PS C:\ & gt; $vm. MarkAsTemplate()

  Exception by calling 'MarkAsTemplate' with '0' or the arguments: "the operation is not supported on the object."

  On line: 1 char: 19

  + $vm. MarkAsTemplate (& lt; & lt; & lt; & lt ;)

  By reading http://pubs.VMware.com/VI-SDK/visdk250/ReferenceGuide/vmodl.Fault.NotSupported.html looks that this exception is thrown because ESXi does not support templates. Is that correct?

  Best regards

  Mikael Johansson, Sweden

  Creating a model is a function of Virtual Center.

  See ESXi can create models of? and ESXi + models.

• Need help to change a creation of VM PowerCLI script to support host ESXi and vCenter

  I have the below script that I created with much help from LucD - thank you! This has served me well for my lab procedures rip - replace so far. This script works when I run it against my single ESXi host when it is not connected to my server vCenter, but it throws errors when I run this script when the host is connected to vCenter and it fails to implement the controller SCSI Paravirtual. I think when the host is under the control of vCenter that changed some of the settings.

  If I point to the vCenter instead of ESXi host, I still get the same problem. In addition, I would also add the ability to create virtual machines in pools of different resources of a cluster of vSphere. My name in data center's LAB and my Cluster is called Local with pools of resources like TestLab, etc. see Horizon.

  Ideas please!

  Error message:

  Set SCSI controller: 21/10/2014-18:02:11

  SCSI controller set

  Failure of the operation for the entity 'W81X86 '.

  with the following message: "access to the parameters of resources on the host computer is the server manages:

  '192.168.1.5 '. »

  Get-SCSI - VM $VM controller | where {$_.} Type - eq "VirtualLsiLogicSAS"} | All-CBS...

  ~~~~~~~

  + CategoryInfo	: NotSpecified: (:)) [game-SCSI controller], HostAccessRestrictedToManagementServer)
  	+ FullyQualifiedErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_OperationFailed, VMware.VimAutomation

  . ViCore.Cmdlets.Commands.VirtualDevice.SetScsiController

  The real script:

  # Create Virtual Machines LAB of CSV file

  Add-PSSnapin-name "VMware.VimAutomation.Core" - ErrorAction SilentlyContinue

  Game-PowerCLIConfiguration - ignore InvalidCertificateAction - confirm: $False | Out-Null

  $ESXHost = "192.168.1.10".

  $DelayValue = "5000" # 5 seconds startup time

  $vmConfigSpec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $vmConfigSpec.BootOptions = new-Object VMware.Vim.VirtualMachineBootOptions

  $vmConfigSpec.BootOptions.BootDelay = $DelayValue

  $vmConfigSpec.BootOptions.bootOrder += new-Object VMware.Vim.VirtualMachineBootOptionsBootableCdromDevice

  $vmConfigSpec.flags = new-Object VMware.Vim.VirtualMachineFlagInfo

  $vmConfigSpec.flags.enableLogging = $false

  $net = new-object - ComObject WScript.Network

  $net. MapNetworkDrive ("b", "\\192.168.1.3\Build", $false, "", "")

  to connect-VIServer-server '$ESXHost'-'root' user - password to 'P@ssw0rd '.

  Import-CSV B:\LabBuild\Lab.csv - UseCulture | %{

  $disks = @($_.) HD1)

  if($_.) HD2 - not 0) {}

  $disks += $_. HD2

  $vm = New-VM - VMhost $ESXhost - Name $_. VMName - MemoryMB $_. MemoryMB - NumCPU $_. NumCPU-Version $_. Version - ID $_. ID-floppy - Datastore $_. Data-DiskGB $disks - DiskStorageFormat 'Thin' store - resourcepool $_. RPool-note $_. Notes - CD #-RunAsync

  Get-CDDrive - VM $vm | Game-CDDrive - ISOPath $_. ISOPath - StartConnected $true - confirm: $false | Out-Null

  Get-NetworkAdapter - VM $vm | Together-NetworkAdapter NetworkName-$_ .NetworkName-$_.NetworkType to confirm Type: $False | Out-Null

  FloppyDrive get - VM $vm | Game-FloppyDrive - FloppyImagePath $_. FloppyPath - StartConnected $true - confirm: $false | Out-Null

  Get-SCSI - VM $VM controller | where {$_.} Type - eq "VirtualLsiLogicSAS"} | Set controller SCSI-type Paravirtual

  $vm. ExtensionData.ReconfigVM_Task ($vmConfigSpec) | Out-Null

  }

  #This line verifies the powerstate and POWER ON VM to start the installation

  #$vmState = get - VM $vm | Select-Object PowerState

  # If ($vmState - matches "ff") {Get - VM $vm |} Start-VM}

  }

  The Destination parameter in the cmdlet Copy-DatastoreItem takes an object that specifies a folder or file on the data store.

  Take a look at KB2001041, he explains the cmdlet and parameter more in detail.

• Are vStorage API for the Protection data supported on ESXi?

  Hello - we are just turning on our production environment, and my supervisor found a rather disturbing comment on one of the VMware pages: "the vStorage API for Data Protection are the next generation of VMware Consolidated Backup and are provided with all editions of VMware vSphere except ESXi. »

  We are currently using ESXi in our test lab and that you plan to use it in production, but it would be a major problem. I hope it comes to the free version of ESXi, but I can't find a definitive answer.  Incidentally, we either have a business and license.

  Any thoughts would be greatly appreciated. Thank you!

  Pat

  http://www.VMware.com/products/vSphere/buy/editions_comparison.html

  You can see this vStorage API is included for all editions and all editions supporth both ESX and ESXi.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru