HP dv4 BIOS blocked when power on

Similar Questions

• BIOS "Password or power on password Admin" necessary to start

  Just before this problem happened, I suddenly experienced a weird screen glitch and knew to restart my computer. Now, he asks a BIOS admin or power on password that I did not define. What the hell's going on, and what I could do to fix this?

  WHAT-I-HAVE-TRIED-

  I tried '12345 '.

  I tried a blank

  I tried "biosPower".

  --------------------------

  -INFO-COMPUTER-

  Product: Laptop HP flow 11 (without touchscreen)

  Product version: 8.1 (x 64 architecture)

  ----------------------

  If I need more info, just ask.

  @GlitchMasta47

  The password screen, press enter 3 times and you should receive a stop code - enter the site below.

  https://BIOS-PW.org/

  Kind regards

  DP - K

• Why the programs are blocked when I connect and why get signed in several places?

  Windows Live Messenger is blocked when I connect and sometimes Google Desktop.How do solve this problem? Also I was also signed in more than one place. Can you help me?

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• My Word service pack download is blocked when trying to update a service pack for office

  My Word service pack download is blocked when trying to update a service pack for office

  How can I stop it I have and not because of the upgrade for some reason, it does not?

  Thank you

  Mike

  Hi Mike,.

  You are able to install other updates to Windows?

  You can follow the General troubleshooting steps that helps solve the problem of Windows Update.

  Method 1:

  Run the Windows Update troubleshooting tool.

  If your computer is experiencing problems find and install updates of the operating system, try using a troubleshooting Windows Update tool to solve the problem. He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Please follow the steps below to run the Windows Update Troubleshooter.

  (a) key Windows + W key set.
  (b) write the Troubleshooting in this search field on the upper right.
  (c) click the Troubleshooting option after the search.
  (d) click the option show all present on the upper left.
  (e) select Windows Update and follow the steps that are invited to perform troubleshooting.

  Method 2:

  You can download and install the update manually from the Download Center using the number of the update.

  In addition, if the question is limited to the Microsoft office program then please ask your question the link desktop stand for better assistance.

  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-office_install-os_device_win8?tab=threads

  Hope the helps of information. Updated with the status of the issue.

• I am trying to convert my trial creative Cloud to a version of payment, but I keep blocked when the computer asks me to enter a serial number, WHERE can I FIND? Thanks for your response

  I am trying to convert my trial creative Cloud to a version of payment, but I keep blocked when the computer asks me to enter a serial number, WHERE can I FIND? Thanks for your response

  Hello

  You can check out the link below.

  Applications creative Cloud back in test mode after an update until 2015 for CC

  Hope this will help you.

  Kind regards

  Hervé Khare

• First Pro CC blocks when you scroll through the sequence in the timeline - Audio Waveform will Virgin first

  The description is in the title: first Pro CC blocks when you scroll through the sequence in the timeline - Audio Waveform will Virgin first.

  Just started today, will not stop now blocks after a minute or two, and he always does when I scroll through the timeline of a sequence.  First of all, the audio waveform becomes empty.

  What is going on?

  Date/time:	2014-10-22 12:16:16.078-0400
  OS version:	Mac OS X 10.9.5 (13F34)

  Report Version: 11

  Anonymous UUID: E1BCDCD7-6284-3012-9151-FF85491060DA

  Crashed thread: 0 dispatch queue: com.apple.main - wire

  Exception type: EXC_BAD_ACCESS (SIGBUS)

  Exception codes: KERN_PROTECTION_FAILURE at 0x000000011d74b000

  VM regions near 0x11d74b000:

  	VM_ALLOCATE	000000011d 748000-000000011d74b000 [12K] rw-/ rwx SM = PRV
  -> BATTERY CARE	[000000011d74b000-000000011d74c000	4 K]-/ rwx SM ZERO battery guard for threading 4 =.
  	Battery	000000011d74c000-000000011d7ce000 [520K] rw-/ rwx SM = COW 4 wire

  Thread 0 crashed: Dispatch queue: com.apple.main - wire

  Hi 5 deadly venoms

  This problem is resolved in the 9.0.1 update. Please update the application of a patch.

  Thank you

  Kevin

• BIOS time / date zero when power is connected.

  Hello world

  I have a N200 769 - ELG. I installed her updated the winXP SP3 and whenever I plug in or outside the laptop power plug resets the settings of date and time in the BIOS. Same operating system is installed in an old desk and nothing happens. So I'm sure that it is not bound. All the drivers are installed without problem according to a list of sequence, that I found in the forums. So I wonder if someone can provide suggestions.

  Thanks anyway...

  3000 N200 TY2ELTK T5750 Intel Core 2 Duo 2.0 GHz 1 GB 160 GB DVD +-RW

  You can check your bios battery problem, glancing at the clock in the BIOS, it resets every time that you restart? If what then generally points to the battery being defective, the failure rate of the bios battery is low, but it certainly happens from time to time.

• Pavilion a1130n block of POWER LED flashes when it is connected to the mobo

  We had a power outage and now PC won't start at all and power and power supply lights both blink.  I went through the list of power supply.  When everything is unplugged PSU led remains lit.  When I plug in the mobo light starts flashing again.

  On another forum, someone suggested clearing CMOS as check/solution possible, but I've seen suggested once on all of the controls/solutions out there.

  Should I try clearing CMOS or who would really do something to help here?

  Also, I am trying to determine the most cost-effective path of repair/replacement.  The main consideration for me is software and data on the hard drive, I would really like.  I know that the machine is old so I'm thinking the mobo may need to be upgraded in any case of 6 years and the PSU, should probably due to his age and the likelihood it will fail before too long.

  Any guidance is appreciated.

  lardfw wrote: I deleted CMOS (using the pull method) and there is no change. Well, I understand that it was a long shot. I followed the checklist (do not skip steps).  I was a little fuzzy on the checklist is should I go ahead and take memory cards and disconnect the headset, microphone, usb ports, etc to the MoBo? During the only thing connected to the PSU is the MoBo.  Nothing connected to the PSU = green fixed.  Connected to the power supply flashing green = MoBo. So my concern is passed: the hell of the MoBo or PSU is (because I'm buddy up to the idea that it is).  in order to use the hard drive in a new configuration (specifically the software and data on the hard drive).

  Hello lardfw, with nothing connected to the motherboard and you try to start the system, if the motherboard was not defective, with the power supply work as it should, you get all kinds of sound signals, especially when the memory is removed.

  I'm sure that the motherboard has failed. You should be able to remove the hard drive and install it into another system such as a secondary drive and not the bootable disc and be able to copy some files from the hard drive. You would not be able to access the applications.

  Once you have recovered all the data you may be, you could then reformat the hard drive and use the total capacity of the disk as a backup, or even use it as a bootable stick with a new operating system installation.

• Tecra 9100 - BIOS block 1 damaged and the update of the BIOS?

  Hello

  I have an old Tecra 9100 with years of quality service, and it is my first problem, but is a great, after a forced restart the display shows the message BIOS 1 damaged block. I tried to fix the BIOS upgrade to the latest version I found, the 1.6 one, but it is a version of Windows (to upgrade a Toshiba computer I think) and when I try to run it in another computer to generate a floppy and upgrade the BIOS drive, I can't, because a common message from modules of Toshiba.

  Its there any floppy BIOS image - archive I can download to perform the BIOS update the BIOS?

  Thanks in advance.

  Hello

  All you can find is stuff on the Toshiba support page. I don't know where you live, but try to contact nearest Toshiba authorized maintainer.
  They have access to the database of Toshiba and they can get it for you. Call and ask for help. I'm sure they will help you fix this BIOS.

• Satellite L655 - black screen when power on

  My Satellite L655 became black last night... now when I go to turn it on, it goes through the movements but only a black screen after booting in safe mode.

  Any suggestions?

  Stand by. Why safe mode?
  What happen exactly when you press the power button / stop?
  See Toshiba welcome screen? If Yes, what will happen after that?

  Try please enter the BIOS, the default settings and try again?

• Satellite A300/A300D blocks when I play the game

  Hello from Croatia and I'm sorry if spelling has some errors

  I have a laptop Toshiba Satellite A300/A300D
  Here are its features:
  Processor:
  Turion (tm) X 2 AMD Dual - Core Mobile RM-74 (2 CPUs), ~ 2.2 GHz
  Video card:
  ATI Mobility Radeon HD 3650 graphics card
  Operating system:
  Windows 7 Ultimate 32-bit (6.1, Build 7600) (7600.win7_gdr.100226 - 1909)

  When I bought the laptop I had Windows Vista 32-bit, after I put Windows 7 32-bit

  After a while the games have begun to block, even the call of duty 2, I play 5 minutes, and then after 5 minutes to block the departure of about 5-6 seconds and then is good and if all the minutes. I don't know what to do and ask for help

  Thank you

  It is not easy to say what the problem is here. I imagine that some background processes are active and the HARD disk must be busy then you will see that the game crashes or stutters.

  It may be an antivirus application that scans the HARD drive or something similar.
  Have you tried to unplug the laptop from the LAN/WLAN, close all the race but not need process/applications and switch to high performance power plan before you start your game?

  Please play with all this stuff. I mean that Win7 works better on these books like Vista so I think it must be a software related issue somehow.

• Block of power SUPPLY HP Slimline s3710t

  I have a HP Pavilion Slimline s3710t, it runs Vista Home Premium (32 bit).  Power is out on this subject a few months when I moved.  It worked fine the day we moved in, just before I had to stop it and unplugging everything.  Come to our new home and went to hang on to the top and NOTHING.  Taken to be extracted and discovered that food was shot, the guy he has connected to a * test * PSU and it came right on.  He told me that I would need a new and that because my computer is a Slimline I must get a * special * power supply.  I took mine to my computer and did a search and it was not very useful because I can not find the SAME block power, but at the same time, all the power supply that are * recommended * because my computer don't LIST my computer as they work with.   I need a new PSU and I have NO idea what kind I need / can use.  I need one that will run my computer and my games pretty well, but I don't have the money to buy an EXPENSIVE one.

  Hello

  You could try Ebay for $40 or HE winklefor $70.

• Re: Satellite a200. Resetting or freezing when power cord plugged

  Hey,.

  Ive recently had my computer cleaned after that I had problems with it cutting cause of overheating. It allows to cut while loading Vista too I thought only a dust problem.
  However after it has been cleaned professionally and reformat the computer he now always cut while I have the power supply or reductions on when changing the battery to the power source (works great with just battery).

  I have narrowed down to a few options but I just want to see if anyone has useful comments / solutions for fixing.
  1. that I need to update my BIOS. That proves a problem such as this particular model of upgrading the BIOS satellite is not an option to burn to disk and requires a source of energy at the start of the desktop computer.
  2. that one of the sensors is broken and cause interruptions occur when the is not necessary
  3. There is something short circuit when the power source is implemented.

  couple of addition notes what is happening:
  I mean, by resetting the computer just completely stops and restarts ten seconds of the latter.
  If I put the computer to sleep then wake him (even when using battery) it resets.
  When the power supply is on and start, he usually cuts to the same place.

  So any help is appreciated. Sorry if the lay out is hard to understand too, the laptop has so many questions it's hard to link them together. Update ill prob with more problems that I can remember other smaller
  Thank you. :)

  Hello

  Have you tried to reinstall Windows using the Toshiba Recovery disk? Maybe this can help you solve the problem and it s worth a try.
  Check it!

  Furthermore, I would normally say that you need to update the BIOS, but to update the necessary s BIOS you have the AC/DC is plugged in but in your case the laptop freezes.

  So I would try it with factory settings (Toshiba Recovery disk) and if it doesn't work you should go to the authorized service provider nearest. Then, it seems to be a hardware malfunction and the BIOS update is not possible at the moment.

  Good luck!

• Satellite M40X-126: disk blocks when the DVD-RAM has been inserted

  Hello

  I have a laptop Toshiba Satellite M40X-126 with a super multi drive installed. I have a problem with writing to DVD-RAM. Sometimes, when I try to write data to a DVD-RAM disc, the DVD player makes a strange noise, as if the mechanic of material is blocked inside the car. The laptop will not write any data on him and he doesn't notch in this noise. And I can't open the drive, because it is blocked by the software. And windows is blocked as well, I can't do anything. The only thing I can do, is stopped the laptop by pressing the power on button a few seconds.

  I do not think, it is a software problem. I have installed all the necessary drivers (UDF) is installed correctly. And DVD - RAM writing runs smoothly most of the time. But I have every 5 times I insert a DVD-RAM disc makes it drive this strange noise and everything is blocked.

  My disc is damaged? Who has the same behavior?

  Thank you

  Reto

  Hi Reto

  I have the same drive, but it works without problem. I know that DVD-RAM media are expensive, but all I can suggest is you buy another provider and check if it will happen again.

• Satellite L850D PSKECA gel - BIOS blocks

  I have a portable as l850d PSKECA - 01 M 002 it starts normally, you can access the bios Setup by pressing F2.
  It shows the toshiba logo when you turn on my problem when I go to the bios Setup by pressing f2 and load the default configuration freeze my laptop.
  I have to press power to turn it off.

  After that, I can access it again on the configuration of the bios. If I leave to start my laptop stops after the Toshiba logo that I see on my monitor is normally the cursor to the upper left corner freeze anything else, so I have to long press the power again to turn it off.

  I can't load new windows on it. He starts a key usb bootable or cd rom even in his hard drive.
  I also try to reset cmos by shorting the pins located at the rear of the computer laptop m in clock battery but problem still than i've got.

  can you help how to solve this problem I can update its bios if I can't load new windows on it.

  hope you can help this thing...

  It is not easy to say what the problem is here. I've heard talk that this laptop freezes with BIOS.
  Have you can be upgraded to some hardware components like RAM or HARD drive?