HP dv6000 will not perform start up

Similar Questions

• Satellite L305D-S5934 Pro - keyboard will not perform a double click

  Hello

  I have Satellite L305D-S5934 and the keyboard does not work properly. I can use the keyapad to point but it wll not perform a double click. Left click will not work... I think it's a hardware problem, I have tried resetting everything and downloaded synaptics at least 3 times.

  Anyone have any suggestions?
  It does not work with a USB mouse. It is still under warranty, but the agent wants to keep my laptop for 6 weeks to fix while they get a part starting from the United States. and they don't test it for me for free so I'm not even sure this is harware related to 100%?

  Hope someone can help me, thanks

  Hello!

  Do you mean before the touchpad mouse left button or tap on the touchpad function?

  The listen function must be activated first. This means click on the left button of the mouse TouchPad.
  Go to control panel > mouse > device settings > settings > Tapping. There you can check if the function is enabled or not.

  Good bye

• HP Pavilion dv6000 will not contribute to that.

  I have a HP Pavilion dv6000 for some years, and suddenly, he will supply any.  I don't know that something happens at all when I press the power button.  What's weird is that when I connect the power, the LED AC (the one with the lightning bolt above it) lights and stays on for 30 seconds and then turns off.  During this time and afterwards, not at all, the lights, and the computer will not power.  I tried to remove the battery and power cord and holding the button power for 45 seconds, several times, but nothing is working.  I hope you can offer some tips on things to try.

  Thank you

  Zach

  I made a breakthrough!  When I took the screen out, I also unplugged the inverter Board who joined the power to the LCD screen.  I plugged the AC and tried the power button, but it does not turn on.  While I would not lose the Commission, I plugged into the computer.  Before my eyes, the computer began to market.  At this point, I was able to switch to an external display (using Fn + F4) and I was good to go.  Bottom line is, if you have a laptop series dv which only lights up with a broken screen, remove and the inverter Board, plug AC in the reatattch of the Council of the inverter.

  Now, this won't probably solved most of the problems you guys are, but it fixed mine, then I'll call the expressions of folklore on this one.

  Thank you

  Zach

• Satellite U400 will not usually start upward

  Hi all

  I have a Toshiba Satellite U400-217 (PSU44E) running Windows 8.

  Worked fine until a week ago. Now, when I turn it on, the lights are, there is a memory hard drive spin (1 second) - and then nothing. Above the keyboard lights stay on, but the screen remains black.

  I read a use Reset where you take the battery and the power cable on and press and hold power for 30 seconds, then plug the power cable in, starting at the top, stop, reinsert the battery and start again.

  However, the machine still primer not after 30 seconds the hold button. I always get just the lights and nothing else.

  However, the machine will start usually fine on an attempt to out all 30 or more.

  It's boring - ideas or suggestions very welcome.

  Thank you very much

  KaiBosh

  > However, the machine will start usually fine on an attempt to out every 30 or more.

  In my opinion, you should first check the HARD drive
  A friend of mine installed Win 8 on the new computer laptop from another manufacturer
  After a while that the laptop will not start I thought its something wrong with the card mother, but in the end it was just a HARD drive failure

  To be honest I n don't know if his only problem disk HARD but in my opinion, the HARD drive is one of the first pieces that need to be checked
  OK, in the worst case, it could be possible that dysfunction of this mobo.

• Thing strange keyboard, ESXi will not finish starting up until I hit a button on the "Vmkernel loaded successfully."

  During installation and during boot after installation, the yellow, both initialization screen installation and startup stops at "Vmkernel loaded successfully" and will not go ahead until what I hit any key on the keyboard. Once you press a button, everything is moving along well. I even tried to start after installation without a keyboard in and it stops at the same place. Once the keyboard is plugged in, it starts right. It is a PS2 Keyboard. Will try and low rev bios once and try a USB keyboard, but was curious if anyone had seen this before? Thank you!

  If you search the forum for the keyboard, you will find similar issues like this - http://communities.vmware.com/message/1113079#1113079.

• HP Pavilion dv6000 will not stay

  HP Pavilion dv6000 does not load

  At the bottom of the document, it had a link to the replacement of the battery.

• Spool print will not be started.

  My spool print will not run.  I went and restarted and it won't stay running.  I try to add a printer, and he says he can't because spool it printing stops again.  Would it be useful to reinstall windows?

  My spool print will not run.  I went and restarted and it won't stay running.  I try to add a printer, and he says he can't because spool it printing stops again.  Would it be useful to reinstall windows?

  It would probably help if you reinstalled Windows, but this is a drastic measure and almost certainly useless to take in response to this error.

  When you restart the print spooler, it immediately turning off or only when you try to print?

  Assuming that you have an up-to-date antivirus application and have recently scanned withMalwareBytes Antimalware and SUPERAntiSpyware as you are reasonably confident that your computer is free of malware, the most likely reasons for the print spooler not running are a corrupt print job stuck in the queue or a damaged printer driver.

  Follow the directions here: http://www.coribright.com/windows/Article_One.htm

  If you had or have a Lexmark printer, check out these instructions: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Windows backup for maintenance, will not perform a full backup.

  Original title: BACKUP WINDOWS FOR MAINTENANCE

  Why don't my backup to a blank disc or an external hard drive?

  Hello

  ·         What operating system do you use?

  ·         You get the error message?

  ·         Windows backup that you are using?

  ·         Are you able to perform a backup to internal hard drive?

  ·         Were there any changes made on the computer before the show?

  Follow these methods and check if that helps:

   

  Method 1:

  You can try to clean boot in order to check whether a third-party software is causing a problem.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

  Method 2:

  You can try temporarily turning on all security software and then try the updates again.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3:

  I also suggest to follow the troubleshooting steps form the article and check if that helps.

   

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7

  http://support.Microsoft.com/kb/979281

• Vista Service Pack 2 will not ' cold' start

  I have a Dell Studio 1737 I bought last week. Windows Vista Service Pack 2 update offered. I selected it and ran through the upgrade. He completed all 3 steps and rebooted. Seems to work very well. I turned off the laptop and went to bed.

  This morning, the laptop complete the power on self test and went to boot Vista. Nothing for 20 minutes then a warning to the blue screen. He himself deleted before that I could read what caused the BSOD and then tried a reboot. Black screen for 20 minutes with no hard disk activity. Manually, I forced a stop down and loaded the boot menu. Choose the Startup Repair. After 30 minutes, advised by the screen to try a restore to an earlier version running. It took another hour, but it worked.

  Update Windows SP2 offered again. Thinking that it may have been an installation failed, tried again. Downloaded and installed SP2, these three steps successfully completed. Yet once computer rebooted (hot start) and did fine. Shut down the system and restarted (cold boot). Same results! MESSAGE completed and handed over to Vista SP2 and then black screen. Took me another 90 minutes, but I restored it to Vista SP1, now it works well.

  So I can run Vista Home Premium 64 bit SP1 without problem but SP2 does not work?

  Update looking for a 64-bit SP2 or just blindly offer software?

  I think that Microsoft is using me as a Guinea pig.

  I'm supposed to receive a DVD of Windows 7 from Dell, in an upgrade. I am wary to install it now since SP2 does not work yet. I was so angry, I jumped out early without digging further, but now I think I might very well be better to stay with SP1 and jump more "updates" unless someone can tell me what is happening here.

  How SP1 can be compatible, but SP2 is not?

  And if all you can afford is a response of canned paste, boiler, don't waste your time. All it will do is make me madder.

  Apparently, offered to customers by Windows Update SP2 update is NOT a complete or is not 64-bit capable.
  

  UH - huh...

  1. What is the full name of your application or the installed antivirus security suite and when (date about) because your current subscription expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  1B. were ALL of those applications that run in the background when you initially tried install SP2?

  2. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

• Computer Vista will not complete start up once the updates have been installed

  Office worked well on 20 January, until the update when you restart it should start going to black screen with cursor. I tried to fix it, but it does not work. I tried the system restore to an earlier date but gives the error. Does anyone have ideas, which is false.

  Thank you

  Lisa,
  At this point if you have a way to back up your data, I suggest that do you so as soon as possible.  Start the XP that you have installed.  Then copy all your data from the original Windows folder to an external drive or a DVD.

  Then, to try to make this repair, boot from the XP disc and select the recovery option.  This will start you in the recovery console prompt.  From there, you can then run the commands to replace the sam file.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista will not complete start up

  Help

  me

  cant

  beginning

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

• runtime error will not firefox start

  I have Firefox 3.6
  Whenever I try to open the browser, I get an error message that says: Runtime Error!
  Program: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe

  This application has requested the execution to terminate in an unusual way. For more information, contact the application support tema.

  Is it possible that you can help me with this situation?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox

  If this does not work in mode without failure, then disable all extensions and then try to find out who is the cause by allowing both the problem reappears.

  • Choose "Disable all add-ons" on issues to troubleshoot Firefox in Safe Mode to set window to disable all extensions.
  • Close and restart Firefox after each change through "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

• II-think ME214 will not go start page and surveys through the process on when I touch the screen, but used to progress beyond this point

  I have a ME214 ii - think she returned to Chinese writing it starts and get to first page once I touch screen that it queries through the start-up process each time. Also when I connect to the computer it not of resistances that it is a device on the computer. He information in the manual that there is a reset on the side button but I can't find a someone out there could provide some answers please

  Hi Stanley_50,

  ·         He has already worked?

  ·         Did you do changes on the computer before the show?

  ·         What is the exact make and model of the unit?

  Run the fixit of the article.

  Hardware devices do not work or are not detected in Windows

  You can contact the manufacturer of the device to reset the key.

• Backup will not perform, he's stuck at 49%

  Original title: used to backup complete!

  Bakup AM backup on CD, but he has been slain on 49% complete for the last 2 hours. Had problems all morning. Said that I was browsing with IE 8 when spose IE 7 (don't know how it happened?) set in a way everything that Norton is all good. Its just tell windows to save, but the full habit. PLEASE SOMEONE HELP ME :)

  Hi QuEEnzLanDer,

  1. you use backup of XP to back up files and folders on your computer?

  If you use the backup utility Microsoft no, then we recommend you to contact the support team of its supplier for more support options.

  If you use the backup utility in XP, then try these steps and check the result.
  Step 1: Find disk errors, and start the backup
  a. see How to perform disk error in Windows XP check
  b. check for errors on all players.
  c. restart the computer and check if you can back up files.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD player will not perform CD - RW format

  Windows is unable to complete the format of the CD - RW or DVD + RW in the LIVE FILE FORMAT.

  After a MASTER FORMAT, it can not read my disc (CD - RW or DVD + RW) when I insert it again.

  Correct it and troubleshooting of the Control Panel did not help either.

  Please give a solution.

  you did not mention the corruption of the media.

  First do a format with nero/InCD successfully. Then try to Win 7. If it still does not work then the Win 7 software writing could be faulted not before that. If Nero fails also, then you will be safe from corrupt media.

  If possible use InCD I propose that it sometimes generates a quantity of bad sector also report in full formatting the drive.

  Direct format is a unique feature & use all the bytes of the media so if a small part is damaged or badly appeared then it will fail.

  S.Chatterjee