Thing strange keyboard, ESXi will not finish starting up until I hit a button on the "Vmkernel loaded successfully."
During installation and during boot after installation, the yellow, both initialization screen installation and startup stops at "Vmkernel loaded successfully" and will not go ahead until what I hit any key on the keyboard. Once you press a button, everything is moving along well. I even tried to start after installation without a keyboard in and it stops at the same place. Once the keyboard is plugged in, it starts right. It is a PS2 Keyboard. Will try and low rev bios once and try a USB keyboard, but was curious if anyone had seen this before? Thank you!
If you search the forum for the keyboard, you will find similar issues like this - http://communities.vmware.com/message/1113079#1113079.
Tags: VMware
Similar Questions
-
I tried to download Adobe Creative cloud all day (seriously, all day) for my MacBook Pro with OS X Yosemite 10.10.3 and it will not end the installation. I am able to download install and run it and I get the little bar showing progress up to the end, but then nothing happens then. Help Adobe says creative cloud Office opens automatically, but it does not. I tried following their menu troubleshooting and enabling pop-ups and set up a special firewall to allow the program, of which none worked. Help, please!
Try steps mentioned in the link below:
-
my keyboard strokes are not made, unless you type very slowly and hold down the key until the particular letter is displayed
Hi Kdooley,
Are a. When you facing this problem?
B. using a laptop or a desktop computer?
C. is - what happens with specific applications?
D. don't you plug a different keyboard to check?
Method 1
I suggest you to connect this keyboard on another computer and see if it even. If the problem persists, try Method 2
Method 2
Try to change the rate of repeat on the keyboard and check if it helps.
- Open keyboard by clicking the Start button, clicking on Control Panel, hardware and sound, tap keyboard.
- Under character repeat, move the repeat rate slider to the left to keyboard characters repeat more slowly, or to the right to make them repeat faster.
http://Windows.Microsoft.com/en-us/Windows-Vista/change-keyboard-settings
If the problem persists, then it might be a problem with the keyboard itself.
Kind regards
Bindu S - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think -
I want a solution for the problem I was on Win 7 Pro Service Pack 1 in the links on an open Adobe Acrobat Pro 10.1.12 file will not open in my browser Firefox 33.0.2. The error I get is "Acrobat could not run the web browser. Unknown error. (123).
You can try a repair of your Acrobat installation. Maybe, at least it's a start toward a solution.
-
tried to make a donation of $20, but will not accept your use of my personal details according to the rules of confidentiality year so my 20 bucks always in my pocket... what to do?
Hello onjay, what is the part that bothers you? There are also several other ways to donate to mozilla than to go through the donation form: https://wiki.mozilla.org/Ways_to_Give
and of course there are also non-financial ways you can contribute to mozilla:
https://www.Mozilla.org/contribute/ -
, customer service will not recognize me as owner, have no cell phone, have the rite pass it used several times
original title: How can I get my email accountHello
Which email service provider?
If you use hotmail or Windows Live account, you can post your request in the Forum Windows Live for other assistance or contact offer your e-mail service.
-
My PC will not support Windows 8, where can I download 7 on the MS site?
My PC will not support Windows 8, where can I download 7 on the MS site?
You can buy a physical copy, Windows 7 is no longer available as a digital download.
Where can I still get Windows 7?
Full version - Microsoft Windows 7 Home Premium
Microsoft Windows 7 Ultimate - full version
Full version - Microsoft Windows 7 Professional
Version upgrade - Microsoft Windows 7 Professional Upgrade
Version upgrade - Microsoft Windows 7 Ultimate Upgrade
Version upgrade - Microsoft Windows 7 Home Premium Upgrade
Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)
-
Satellite U400 will not usually start upward
Hi all
I have a Toshiba Satellite U400-217 (PSU44E) running Windows 8.
Worked fine until a week ago. Now, when I turn it on, the lights are, there is a memory hard drive spin (1 second) - and then nothing. Above the keyboard lights stay on, but the screen remains black.
I read a use Reset where you take the battery and the power cable on and press and hold power for 30 seconds, then plug the power cable in, starting at the top, stop, reinsert the battery and start again.
However, the machine still primer not after 30 seconds the hold button. I always get just the lights and nothing else.
However, the machine will start usually fine on an attempt to out all 30 or more.
It's boring - ideas or suggestions very welcome.
Thank you very much
KaiBosh
> However, the machine will start usually fine on an attempt to out every 30 or more.
In my opinion, you should first check the HARD drive
A friend of mine installed Win 8 on the new computer laptop from another manufacturer
After a while that the laptop will not start I thought its something wrong with the card mother, but in the end it was just a HARD drive failureTo be honest I n don't know if his only problem disk HARD but in my opinion, the HARD drive is one of the first pieces that need to be checked
OK, in the worst case, it could be possible that dysfunction of this mobo. -
Trust keyboard and aula befire keyboard elight will not install on windows 7 help
TRUST KEYBOARD ELIGHT AND AULA BEFIRE ARE TWO PLUG-AND-PLAY BUT WILL NOT INSTALL ON WINDOWS 7
Hello
1. do you receive an error message or error code?
2 have you made changes on the computer before this problem?
3 is the issue limited only when connecting keyboards?
This problem may occur because of drivers are not installed properly.
Try the following and see if it helps.
Method 1:
Try connecting to another USB port and check if it is detected, or try to connect to another computer.
Method 2:
Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us Note: I recommend to install the drivers for the keyboard and check if it helps.
Method 3:
Remove and reinstall all USB controllers.
To remove and reinstall all USB controllers, follow these steps:
(a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
(b) click on the Hardware tab.
(c) click the Device Manager button.
(d) expand Bus USB controllers.
(e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
(f) restart the computer and reinstall the USB controllers.
(g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
Keep us updated on the status of the issue.
-
Keyboard does not not after starting windows until you restart
I have to restart and restart Windows 7 to be able to use my keyboard model M IBM under Windows 7. Windows starts perfectly fine, except for the fact that I can't type. It works very well with my BIOS, the GNU GRUB and Ubuntu after a cold start. Someone knows what's the problem?
Hi Mick,
Thanks for the reply.
Because the keyboard is very old, I doubt that there could be a problem with the drivers.
I suggest to update the drivers for the keyboard and check.
Please visit the link below to update the drivers.
http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN
If the steps above do not work I suggest you to change the keyboard because it is too old.
Please get back to us if the problem persists.
-
Spool print will not be started.
My spool print will not run. I went and restarted and it won't stay running. I try to add a printer, and he says he can't because spool it printing stops again. Would it be useful to reinstall windows?
My spool print will not run. I went and restarted and it won't stay running. I try to add a printer, and he says he can't because spool it printing stops again. Would it be useful to reinstall windows?
It would probably help if you reinstalled Windows, but this is a drastic measure and almost certainly useless to take in response to this error.
When you restart the print spooler, it immediately turning off or only when you try to print?
Assuming that you have an up-to-date antivirus application and have recently scanned withMalwareBytes Antimalware and SUPERAntiSpyware as you are reasonably confident that your computer is free of malware, the most likely reasons for the print spooler not running are a corrupt print job stuck in the queue or a damaged printer driver.
Follow the directions here: http://www.coribright.com/windows/Article_One.htm
If you had or have a Lexmark printer, check out these instructions: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm
-
Bluetooth Mobile Keyboard 6000 will not close pairing mode
Win 7 HP SP1 x 64
I used to have the keyboard work. Had to do a system restore and reinstall Windows. Now, it does not work. It can associate and work on my iPod Touch.
It is recognized in the devices, but it is not pairing mode and red & green light keeps blinking. The keyboard does not work in any application.
I replaced the batteries with new ones.
HID in the service is set to automatic.
Bluetooth Support Service is set to automatic and logon is set to local Services with a password. It didn't get recognized with local network service or Local System.
In Bluetooth settings, discovery, allow Bluetooth devices to find this computer is activated. It did not work with it not controlled, either. Connections to allow and alert checked.
Printers and IDevices recognizes it as a "Microsoft Bluetooth Mobile Keyboard 6000." In properties, general tab, it's all the "not available" with the exception of "categories: keyboard." Hardware tab is empty. Services tab is empty. Bluetooth tab, information device, all the "not available" except "Categories: keyboard" and "Transport: Bluetooth.» Said troubleshooting information:
* Connection: authenticated
* Last connected: currently connected
* Serial number: not available
* MAC address: not available
* Username: (list)
* IP address: not availableI have read the documentation that Tech in this forum have given links, through their steps with no fix.
Can you please help?
Found my own answer.
It was just a matter of installing the Bluetooth drivers. When I looked at a list of all software installed on my computer before I reinstalled Windows, I noticed on the list produced by ccleaner a "Broadcom 2070 Bluetooth 3.0" listed. I went to my website (HP) manufacturer and who downloaded, installed and bingo! my keyboard now works.
Update of the HP system didn't detect or tell me that I needed.
-
MY Watch has a black screen and does not restart forced when you press the bottom of the Crown and side
Hello
Try charging your watch (leave about 2.5 hours for a full charge).
If it does not light after that, try force it restarts again: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo.
If it is not running yet, contact Apple support (mail service may be available) or make a booking Genius Bar in order to have your watch checked under warranty:
-
System Restore will not work
Hi FriendFriend,
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
3. you receive an error message when running the system restore?
I suggest that you put the computer in a clean boot state, and then try to clean boot.
It is possible that some third-party programs installed on the computer is causing the problem.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See the link below to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
(a) click Start, type msconfig in the search box and press ENTER.
(b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
(c) under the general tab, click the Normal startup option, and then click OK.
(d) when you are prompted to restart the computer, click on restart.
If the previous step fails, then view the event logs to examine the system restore service errors.
(a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.
(b) click on the category System .
(c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.
Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP
http://support.Microsoft.com/kb/302796
Procedure to view and manage event logs in Event Viewer in Windows XP
-
All of a sudden, for some reason unknown to me, my mon imprimante printer does not print images JPG from Windows Photo Gallery black and white or grayscale. No matter if I turn it on to or black and white color option / shades of gray option, it only prints in color. If I remove the color of my printer ink cartridge and leave the black alone to, and order the printer to print in black, the printer behaves as if it was printing but the page comes out blank.
If I try to print, for example Word documents in black and white / shades of gray, they come out, as requested.
Help, please! Thank you.
Hi Ulap,
A. from when what happens?
B. you are able to print the other black and white file formats?
First of all, check if you are able to print black and white photo viewer.
Then, run an auditor of system files (sfc scan) on your computer in order to replace the files corrupted on your computer.
1. click on the Start button
2. on the Start Menu, click all programs followed by accessories
3. in the menu accessories, right-click on command line option
4. in the drop-down menu that appears, click the "Run as Administrator" option
5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
6. in the command prompt window, type: sfc/scannow then press enter
7. a message is displayed to indicate that "the analysis of the system will start.
8. be patient because the analysis may take some time
9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
11. once the scan is finished, close the command prompt window reboot the computer and check if the problem persists.
Bindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
Maybe you are looking for
-
Actually, Firefox stopped working. When I type something, it takes about 5 seconds for each character. I uninstalled and reinstalled the browser. I disabled all addons. Nothing seems to work. It started about three days ago. I do not understand what
-
Again lost his mail. Have tried everything.
Please help me to retrieve my new message sound.
-
cannot import bookmarks & c of the opera. Have followed the instructions but the window which should display the choice for import is empty
-
How can I prevent the OE constantly compress folders?
I'm constantly interrupted by a box to compress folders in OE. How can I stop this? My files have been deleted or compressed.
-
Cannot remove 11Domaine Studio
I am trying to remove a (studio 11) program and the system says that I have installed SP2, I currently have installed SP3. How can I remove this program?