Spool print will not be started.

Similar Questions

• Print Spooler service will not be "started."

  Running WinXP Pro with all the latest updates.  The Print Spooler Service continues to stop on its own.  Ran a repair twice installation and that seems to fix the problem for a while.  But the print spooler service continues to shut down.  Do not know why.

  Run the hp print diagnostic utility to fix it to the top.
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02072599&LC=en&cc=us&DLC=en

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• Brother HL-2240 printer will not print after installing Windows.

  original title: MS upgrade on Windows XP

  Help, please.  I installed the recent update of MS for XP and now brother HL-2240 printer will not print.

  KB982670 seems to have something to do with .NET Framework 4 Client Profile.  This update or Windows PowerShell have been updated "critical", then maybe you didn't need to get.  However, it's water under the bridge now.

  When you open the print queue, are shown print jobs as stuck there?  Just to make sure that the queue is cleaned, do the following:

  Open a command prompt window (start > run > cmd > OK)
  Type each of the following commands in the command prompt window and press ENTER after each line

  • net stop spooler
  • del "% windir%\system32\spool\PRINTERS\*.*" {answer Y when prompted}
  • net start spooler
  • output

  It's really only a shot in the water, but he could help and can not hurt to completely uninstall and reinstall the printer.  Follow the directions here: http://www.coribright.com/windows/Article_One.htm

  Get the complete installation package here: http://welcome.solutions.brother.com/bsc/public/us/us/en/dlf/dlf/000000/004500/dlf004515.html?reg=us&c=us&lang=en&prod=hl2240_us_eu&type2=1&os=7&flang=4&dlid=dlf004515

• After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  After the upgrade to OS 10.11.2, Mac Mini is so slow that it can take an hour to operate and the printer will not scan.

  When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.

  Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.

  Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name, may appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• Dell Inspiron 7520: Printer will not print multiple pages after upgrade to Windows 10

  I have upgraded to Windows 10 and now my HP printer will not print multiple pages. The printer is set to print documents from the spool. Thanks for any help!

  I uninstalled everything related to my HP printer (in the Device Manager: printers and print queues) and searched my computer for everything related to my HP printer and deleted stuff also. Then I reinstalled the drivers and software from the HP website. I have updated Java also (I have no idea how much this has to do with my impression). I have my printer is off and unplugged for one minute before Relighting. I restarted my computer and now it seems to be printing normally. Praise the LORD!

• My printer will not remove the last print job

  My printer will not remove the last print job and does not meet what I already found on internet support

  Hello

  If you haven't done so already, try the following.

  From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Restart the computer and you should find that the document has been deleted.

  Kind regards

  DP - K

• Reference Dell 926 printer will not print after installing Windows 7

  After the upgrade to Windows 7 my 926 printer will not print. I followed the suggestions found here (unplug the printer on the wall, remove the brick, low load patch R166248 to delete the printer, the latest driver to load, R146832 dated 26/01/07, reboot). Restarts, driver going through complete installation process then I get an error at the end of the process, "the Dell Photo 926 Printer printer driver is not installed". I did this several times. In addition, I restarted the spooler to print several times. No luck. Additional suggestions on how I can get my 926 to work with Windows 7?

  Greg,

  I think that we all regret our first wedding, well most of us.

  Removal of print jobs is a way of really nice to get rid of your documents. After you restart your computer, you should be able to run the fix, Manual printer removal driver and restart once more. Try it to install the Vista drivers in compatibility mode, I used Vista SP2.

  Right click on the file setup.exe, on the left, click Properties, compatibility of the left click. Change Vista compatibility. Then, install the appropriate drivers. You will be asked when connect (printer)

  To install the drivers, sometimes the file decompresses and does nothing. You must find the setup.exe file, right-click on it, then on the left click on run as administrator *.

  Rick

• Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another progr

  Have windows 7 64 bit, andf Intuit quickbooks pro, Amyuni PDF printer will not save to the PDF format. Message from readings of intuit library printers 'could not print to the printer. Check your printer selection. Impression was canced from another program.

  Hi rkusa1,

  Thank you for using Microsoft Windows forum

  QuickBooks worked very well under Vista? It should also work reliably on Windows 7.

  However, you may want to follow these steps.

  1. right click on your quickbooks start exe file and open properties.

  2. on the Compatibility tab, select the compatibility mode and run this program in compatibility mode for Windows using the following link: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows (only if she worked very well with former Windows operating system)

  3. the control privilege level "Run this program as Administrator". Press apply/OK to close properties.

  4. start - devices and printers - add a printer - add a local printer - create a new port - local port and name it QBD_PDF.

  5. Choose install AMYUNI Technologies - Amyuni Document Converter 300 (click the button update windows if it is not on your list).

  6. If windows detects you already have a driver and then choose to replace the current driver. The printer name Quickbooks PDF Converter - do not share the printer - NOT set as the default printer. Finishing

  7. start right click - devices and printers - printer QB, choose printer - properties and go to the Advanced tab.

  8. remove the checkmarks in the 4 elements with square next to them (lower part of the screen) boxes, and then select "Print directly to the printer" press OK to close the window.

  9 restart you computer and open Quickbooks. Open the file - printer installation and make sure of Quickbooks PDF Converter is selected for any operation PDF printer that you use frequently. (on rare occasions, you will see not of Quickbooks PDF Converter on the list, reboot again and you'll get it).

  You can now perform operations of PDF in Quickbooks (works for 32 and 64-bit Windows 7)

  For a similar question, see: http://social.technet.microsoft.com/Forums/en/w7itproappcompat/thread/2bd30024-0a64-4f6b-a831-8cb7c1e4cce5

  If the steps above do not post your question in this link: http://community.intuit.com/quickbooks

  Kind regards
  Aziz Nadeem - Microsoft Support

• My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  My PS6520 wireless printer will not print when she goes to sleep, any idea? Thank you

  Hi 464544,

  Welcome to the Forums of HP Support! I understand once that your HP Photosmart 6520 starts in mode "sleep" you cannot send a print job, it does not automatically standby upward.

  Please take a look here:

  The printer into standby mode after five minutes of inactivity to help reduce energy consumption. The sleep time can be changed from the control panel. The printer will wake up mode 'sleep' to print when a print job is sent to it.

  However, the auto power off feature must be disabled. Auto Power-Off turns off the printer completely, you must use the power button to turn the printer back on. You can change the setting Auto Power-Off from the control panel. configuration -Source

  Menu Configuration > other Menus > Eco > auto shut-off > off

  I hope this helps.

• Printer will not connect via USB

  HP lj1022 printer will not connect not not via the USB port after the installation of the new driver upgrade hp lj1020/1022 for Windows 7 (64-bit). Driver seems to install properly until the moment where he is asked to connect the USB cable. Then he hangs up. HP lj 1020 printer appears in the display to the dashboard as the default printer. Computer recognizes the printer as hp printer lj1022 but in another "device not specified Panel when and only when the printer is on and the USB cable is connected." When printing, nothing ever comes from queue.

  Diagnosis is only that something is stuck in the queue and remove the task from the queue, but does not. Diagnostic shows no problem.

  The lj1022 printer accepts data from two other computers, as well on Windows xP and using the same cables. Three other USB ports have been tested on the new Windows 7 computer without results. The USB ports on the Windows 7 computer accept keyboards, mouse and flash memories wireless dongle without problem. The Windows 7 computer also sends data to a printer wireless with no problems.

  Hi Rmhodgson,

  Run the following utility below.

  http://support.HP.com/us-en/document/c02073861

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• E-all-in-one HPOfficejet 8600Pro printer will not now speak to iMac since updates Driver & Maverick

  I just bought a new HP printer and set up on my iMac to print. After a LOT of messing around FINALLY got it works, BUT a day later upgrades arrived to update my iOS X 10.9.3 with a simultaneous upgrade of the software driver for the printer. I duly installed at once – but now, regardless of what I do the printer will not work. The computer can be seen as it is showing ink etc. levels and said he printed and I can print test pages, but it has not allowed me to print from Word, Excel, Web or PDF!  I tried to uninstall the printer drivers and reinstall those of the HP Web, which I suppose would be the 'old' - but still no luck. I need this job and am close to tears - any help would be appreciated. I also tried deleting and reinstalling Office for Mac... NB it prints beautifully and effortlessly to my husband's PC.

  Welcome to the LAG54 forums,

  I saw your post about not being able to use the printer completely after a few updates. I will do my best to help you with this!

  First, try the following steps:

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your computer
  4. Add the printer: full function and driver-OS X 10.9 Mavericks software

  I hope that does the trick! Let me know the results!

  Have a great Tuesday

• My HP Photosmart C4100Series printer will not remove a previously requested printing package, and is now stop printing of other things. How to rectify it please?

  I was printing a document from page 52, and then discovered that I was not necessary. After printing, the printer will not remove the print request, therefore it prevents me to print other documents. How can I correct this?
  I turned off the printer, but nothing helped.

  Thank you for your help. Very useful, but I had already found the doctor of scan HP printer on the internet and it was so simple to use and also corrected the fault in a few seconds.

  However, once more, I thank very you much.

• spooler print does not preach

  When I want to print, there is a message that the spooler printing is not enabled.

  I go to computer management, Services, and spooler = activate automatically.

  It makes no difference

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  Left click at the bottom of the Microsoft Community page

  English and set your language.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">