HP DV6t (B6C70AV) ENVY: which is 3.o usb port in my book!

Similar Questions

• Which side is the usb port 3 on a 2015 macbook pro with the retina display?

  Which side is the usb port 3 on a 2015 macbook pro with the retina display?

  I found the answer. It's the left side near the microphone.

• HP Envy 15 1195eo problem of USB Ports!

  I am facing a problem with my usb ports on my HP Envy 15 1195eo. I tried a number of things to make them work, but nothing did. Basically, when I connect a usb device, it will connect, stay tuned for a very few seconds, then disconnect for a few seconds and then connect for a few seconds again, and he repeats like that of infinity. So I'd like prompting assistance works again!

  News of the computer:

  Model: HP Envy 15-1195eo

  OS: Windows 7 64-bit

  Hello again Unboxeremail.

  That solves the problem at the origin?  This can be useful information.

  I took a look inside the laptop and noticed three ports (2 ports standard right) USB and eSATA/USB port a combination on the left, what port is non-functional?  In addition, the image of the motherboard indicates that the USB ports are not on a panel separated from the motherboard so a connection problem is very unlikely here.

  

  Do you have a multimeter?  Check the USB port to see if the connection is down at random would check it like a hardware problem.
  
  If the problem persists after a new installation of Windows, then this indicates a hardware problem.  This laptop is guaranteed?  You can see here.  If it is under warranty, you should contact HP support and let them know about the issue. The number for US / Canadian customers is 1-800-474-6836.  If you are in another part of the world, you visit HP's Support around the world to find the coordinates for your region.

• USB 2.0 & 3.0, HP Envy m6-1225dx Notbook PC USB Ports, which is which?

  Hi all.  (My laptop is configured with 3) USB 3.0 ports and 1) USB 2.0 port.  2 ports are located @ front left side, and the other 2 are @ right rear of connecting the power supply...  How to distinguish between USB 2.0 and 3.0?

  Hello

  A USB3.0 ports should be a symbol of the SS beside him (SS = Super Speed). #17 & #18 od the following manual pages show you where:

  http://h10032.www1.HP.com/CTG/manual/c03694820.PDF

  Kind regards.

• ENVY of HP dv7-7265er - USB ports on the right side does not

  Test of the UEFI BIOS (after update F.10 F.29)

  Check USB port: FAILURE

  FAILURE ID: QWB664-6GX74K-QFPK0K-8D1W03

  PRODUCT ID: C6D03EA #ACB

  Hello

  Please find the link manual below the part number is USB card (includes cable) 681986-001 & check the page numbers 73 component replacement procedures.

  http://h10032.www1.HP.com/CTG/manual/c03591253.PDF

• Put Windows 7 on hp envy 17 Quad t - now USB no longer works!

  Hello

  I just got a HP Envy 17 Quad t, which came with Windows 8 on it.  I'm not a fan of him, so I installed Windows 7 instead.  After installation do not work many things, as expected, but I was able to install drivers windows 7 for them and got all the functions that have been lost so far, I have noticed to rework except my USB ports.  I tried two different drivers of these boards with no joy.  If someone has the right driver, so I can get USB up and running would be extremely appreciated!

  Thank you

  Max

  OK, was able to fix it myself after a few hours of really messing around.  (I'm not a computer guy, so this announcement to other experts).

  First of all, I went on the Intel site and updated the chipset driver, once again.  This fixed the problem of Bus SM.

  Second, I had to find the driver 5227 RTS for the card reader from RealTek PCIE, which I couldn't find on the site from RealTek but through multiple searches on Google using the portion of the id of material only up to '... in the end 5227."it's strange, because another driver RealTek PCIE card reader worked before Win7 updates, but that even the driver did NOT work thereafter.

  Then he got even more bizarre, to me at least.  The I need drivers were all there in Device Manager, no more yellow triangles, but I plugged my external hard drive on a USB port on the right side of my computer and nothing.  The way in which my office is set up I really only use this side.  Exasperated I tried the USB port on the left with another device.  Alto!  It took.  I had to plug my external hard drive in the left side first and could then unplug and install it on the right side and it worked.  No idea why it would need with one side first, then don't work both sides.  I waited a long time when I plugged it on the right side first before trying the left where he recognized immediately, then immediately recognized on the right after that.

• Audio input on mac (MacBook Pro (retina, 13 inch, mid-2014) which has a single audio port for headphones and number of PORT of ENTRY.

  How to do on my MacBook Pro (retina, 13 inch, mid-2014), which has only a headphone audio input port? Do Garageband, or Preferences/audio, or Audioand MIDI or what?

  Connect an audio interface to a USB port to have an audio input, or insert a divider entry in the headphone port. You need additional hardware to have an audio input.

• HP Envy x 360 (M1V68UA): USB Ports all failed - resembled HW failure, but resolved by reinstalling a driver

  This post is an explanation of the complete absence of the laptop (2.0 & 3.0) USB ports and the later hotfix.

  Suspecting a hardware failure, I ran the Diagnostics UEFI and received confirmation of a default by a character 27 failure code.  This type of information is supposed to be useful to someone, but I couldn't find any documentation on this failure on the Web code and technician HP customer care has never offered an explanation.  The ID of the failure, I received was:

  0GF87X-7NW88A-GXGJMF-8D3Q03

  I made arrangements to ship the laptop to HP repair, but while waiting to receive their shipping box, I continued to research.  I happened to run System Mechanic from iolo and noticed a tool "Toolbox |" Recover | Troubleshooting of the system"that took me as a result of convenience store window 10.  I ran the hardware and devices troubleshooter, and confirmed a problem with the USB ports.  But, surprisingly, the fix was to install the latest driver for the Intel USB 3.0 eXtensible host controller (USBXHCI. (SYS).

  Once the driver has been reinstalled, the USB port problem has been resolved.  He worked for 3 days and I was able to back up my laptop on an external hard drive into a USB port, as I usually do.

  So if you see a problem with your USB ports, which can resemble a hardware failure, it is better running of the utility window hardware & peripheral troubleshooting.  It can save you an unnecessary repair work.

  Best regards, Mike
  
  

  @mike_d177

  Welcome to the HP Forums
  
  I would like to take a moment and thank you for the use of this forum, it is a great place to find answers.
  You have the best experience on the HP forum, you can also visit our Guide of Forums from HP for the first time here? Learn how to post and much more.
  
  As I understand it you had conducted a test of material using the UEFI diagnostic tool and received a failure ID, however, you install the latest driver and solved the problem.
  
  I'm glad that worked for you, even if you keep the only common, the ID of the failure you captured represents a "Communication error" device on devices such as GPS, switch and/or USB, HUB, Modem, network card, network drive, PCI, PCMCIA card.

  Install the most recent driver is one of the first steps to solve the communication error, however, if the problem is intermittent because it sometimes a repair would be the best way to go.

  Click here to see details on the HP Service Center.

  If you are unable to reach a resolution, please click on accept the Solution to help others with similar issues.
  If you like my assistance, please click on the thumbs up icon.
  The two icons are below this post.
  
  Have a good day Ahead.

• Computer laptop HP Envy 17 - USB Ports not working not

  Product: HP Envy 17 Notebook PC

  Operating system: Windows 8.1

  When I try and use the USB ports on my laptop, the system recognizes not the device is connected, or allows the unit to operate. There is no error message and device icon to remove safetly does not appear. This problem started after I ran a few Windows updates before turning off my computer for the night.

  The devices worked normally before but have stopped since then. Several devices have been tried, but to no avail.

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you.

  Looks like that the USB Ports have stopped working on your laptop and your need help

  We will surely help you with this question at the earliest

  I'd like to request you to perform the REFRESH of your laptop back to a previous state

  When everything worked well and normal

  Step 01. Please go to settings on your laptop computer laptop

  Step 02. Select the general tab on the left side

  Step 03. Click on "refresh your PC without affecting your files.

  Step 04. Follow the prompts on the screen to complete the refresh/system restore

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• OfficeJet Pro 8625: Which of the 4 rear usb ports can I use to connect to the computer

  There are four USB ports on the back of the printer.  Group of two ports on the top and another group of two below.

  Which of the 4 ports should I use to connect to the printer.  I intend to use the ability to fax from the printer.  Best, Aaron

  Hi Aaron,

  There is only a signle USB pet at the back of the printer, not 4

  To connect the printer to your PC, plug the USB to the USB Port rear, as shown below:

  

  To connect the device as a Fax, connect a phone cord from 1 d to a wall phone jack.

  Kind regards

  Shlomi

• want to 810-430qe CTO: 810-430qe CTO... of the usb ports 3.0 and 2.0 ports, which are which?

  computers HP do not seem to come with a simple explanation of usb port scheme and since there are a dozen of them, I would like to know precisely which are which?    Help, please...

  Hello @mikesoares,

  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I read your post on USB ports and wanted to help you!

  USB 2.0 ports are black while the USB 3.0 ports are blue.  Please see the picture below, which shows the ports at the back of your desktop:

  Figure: Kaili2 back i/o ports

• No matter which usb port I use for a usb hub

  I have a compac presario CQ60-215DX notebook and I want to install a usb hub. No matter which usb port I use? would also like to know if it is necessary to remove it to restart my computer"

  Thanks for any help.

  Karen

  The only time you usually get trouble with USB ports is when you mix both USB 3.0 and USB 2.0 devices.

  • For all USB 3.0 is backward compatible, it is simply not the case that all the older devices are USB 3.0 compatible.  If you have a problem with an older device, consider that it may be because it is plugged into a USB 3.0 hub / port.
  • Not all hubs are created equal.  If you try to run some devices high speed (things you plug a hub) on a lower speed (2.0) turntable, they may lose the integrity of the data (Act funny) or refuse to perform certain tasks (depending on the device).  These devices may work best when it is plugged directly into the computer no matter that they are running as the USB 3.0 or USB 2.0.  It is not, therefore, necessarily what port the hub is connected - rather, it could be the hub itself (if you have problems).

  Peripheral USB could better with a reboot - some may not reset at all without rebooting.  A USB hub, one of the simplest types - these are usually plug-and-play.  That's all that is connected to the hub, which could be the determining factor for the restart.  It's Windows - it is always better to restart when things change.

• My flash drive which was a backup of my system windows has been accidentally immersed in water. When it is dry can still be used without destroying my USB port?

  My flash drive which was a backup of my system windows has been accidentally immersed in water.  When it is dry can still be used without destroying my USB port?

  Hello

  Put it in a bag of rice for a few days or more. -seal the bag.

  If you remove all the moisture, it shouldn't affect the USB ports if nothing is
  possible. Usually it is not a problem if the moisture is removed.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• How to burn an ISO (which is a bootable CD/DVD) to a USB port?

  How to burn an ISO (which is a bootable CD/DVD) to a USB port?

  I usually burn ISO files bootable CD or DVD with NERO6, 7.   Now, I would like to burn on a USB key.

  Ideas on a good and stable program?

  I. - Download the software that makes bootable USB drives the ISO. WinToFlash http://www.bing.com/search?q=+WinToFlash+&form=HPDTDF&pc=HPDTDF&src=IE-SearchBox> and Unetbootin http://www.bing.com/search?q=UNetbootin&form=HPDTDF&pc=HPDTDF&src=IE-SearchBox> are the two options included in the section resources. The software will automatically convert iso files on a USB drive and make it bootable.

  II. - open and install your chosen software. The software will be an installation clicks where pressing a couple of times then you have ready to go.

  III. - Plug the USB and check what drive it is listed as in 'my computer '.

  IV. - Launch your chosen software and specify paths. There will be two sections to choose from. Look for the converted ISO file in the download or the source article. For the second section, select the path or the destination (USB key) is transferred to ISO.

  V. - click 'Next' and let the program create a USB bootable ISO file. It may take some time depending on the size of the ISO file. When the process is finished, you have a bootable USB key with your ISO file.

  UTC/GMT is 05:13 Sunday, December 18, 2011

• Where is the USB port on the printer 4500 hp envy all-in-one

  Where is the USB port on the printer 4500 hp envy all-in-one

  So the question for your answer:

  Compatible products for: HP bt500 Bluetooth USB 2.0 Wireless Adapter (Q6273A)

  Color Multifunction and all-in-one HP Officejet Pro 8500 all-in - One Printer series - A909 HP Officejet Pro L7500 all-in - One Printer series Mobile inkjet printers HP Officejet H470 Mobile Printer series Specialty Inkjet Photo HP Photosmart A520 printer range Printer HP Photosmart A620 Printer HP Photosmart A630 Series of HP Photosmart A820 Home Photo Center Printer HP Photosmart B8550

  And now, if you want to get help with your problem, you are cordially invited to use the assistance offered, otherwise I wish you all luck since your iPhone printing...

  For questions print via Bluetooth, you can connect with Apple, maybe you will be better as their response

  All the best...