ENVY of HP dv7-7265er - USB ports on the right side does not

Similar Questions

• HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

  My new laptop usb port for the left side does not, only 1 work on 3 Please help me

  Hello:

  Have you installed the drivers for W7 32 bit amd chipset?

  If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

• Satellite M300 - works only one USB port on the right side

  Hello

  in the series of M, Toshiba M300 satellite (red), there is a port USB combo and something else, and also another USB port ordinary on the * left * side of the laptop. There is also a USB port on the * right * side.
  Currently, for some reason, on my right, the USB port works (in other words, the laptop detects) and my left side, where there are 2 USB ports, it does not work (in other words, it does not detect it) I have no idea how solve this problem.

  And what happens if you connect the external USB mouse?
  It work?

  > I have the toshiba recovery of the burned disc, should I use it?
  Why not, you can test it with the new operating system preinstalled too.

• My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Tuesday, July 17, 2012, 10:53:01 + 0000, JonathenHarmon wrote:

  My usb ports on the right side of the laptop don't work im not running on wiindows7 with an acer aspire 5253

  Of course, it sounds like a hardware problem, not a a Windows.
  Contact Acer for repair.

  Ken Blake, Microsoft MVP

• help that my usb ports on the left side do not work

  I have a hp pavilion dv6-6117dx. the usb ports on the left side are stoped working. I need help please...

  A factory restore can't hurt, and it can fix it. First of all, I think I'll try re-installing the AMD graphics driver which usually includes the motherboard drivers.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-98292-1&cc=us&DLC=en&LC=en&OS=4063&product=5177781&sw_lang=

• HP touchsmart 520: usb ports hp touchsmart 520 side does not

  usb ports side Device Manager does not tell all the works, but nothing picks up, but ports usb back all work

  Greetings @idwer16.

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that some USB ports do not work on your system. I'm happy to help you with this. As a start, please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  The side ports worked before?

  Are the version of USB ports on the side of 2.0 or 3.0 on your model?

  Have you tried updating the drivers on your computer? If this is not the case, the HP Support Assistant could help with this. On most models done component USB on board chip set drivers.

  HP computers - using HP Support Assistant (Windows 10, 8, 7)
  HP PC - troubleshooting HP Support Assistant (Windows 7)

  Another document that could help may be Computers HP - troubleshooting USB (Windows 7) connections.

  Please let me know if none of this works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• USB ports and the sound card does not

  My sound card and arrested USB ports stopped working.

  I have no sound.

  Sony Vaio VPCEA3BFX

  WIndows 7

  I have restored all the drivers, performed troubleshooting tasks all the recommended other than a complete restoration. What else can I try?

  Hello truck,.

  Thanks for the post.

  Try the following troubleshooting steps:

  Audio problem:

  1. Reinstall the audio driver: Realtek High Definition Audio Driver.
  2. If the problem persists, follow these steps: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1009501
  3. Next step is the recovery of the system: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1027232
  4. If the problem persists, contact the Sony service team: http://esupport.sony.com/US/p/service.pl

  USB problem:

  1. Reinstall USB drivers: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1004056
  2. If the problem persists, perform the hardware diagnostic test.
  3. Make sure that any external USB device is connected with the computer during the whole process.
  4. http://www.KB.Sony.com/selfservice/documentLink.do?externalId=C1019507
  5. If the problem persists, restore the system to a previous date: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1003813
  6. If the problem persists, perform a system recovery.
  7. Then, contact Sony service team.

  Please indicate the solution as accepted, if you find this information useful.

  Kind regards

  Tony.

• M40X-129: the two usb ports on the right does not work

  Hello people.

  Two days ago, I bought a satellite m40x-129. I wanted to use a usb mouse and a drive hard usb so I had to plug the device into a a usbport on the right side of the laptop, but is does not work.
  even after reinstalling with windows xp pro (I need to connect to a primary domain controller) has not changed. I installed all the drivers of the tool-cd burned by a toshiba tool in the original installation.
  Maybe it's a hardware fault. someone else has the same problem?

  Thanks, jens

  today I updated my drivers for the new 7 series chipset from intel, but the usb ports on the right still have no power and do not recognize any device.
  I'll ge see my local dealer Monday ;)

• 2 USB ports on the left side of my HP pavilion g6 does not

  2 USB ports on the left side of my HP pavilion g6 does not after I formatted my system, it detects all the devices plugged in these two ports, before operating system was family premium from Windows 7, but now he have professional window 7, what can I do?

  Windows 7 64-bit, install:

  Intel USB 3.0 Host Controller Driver

• Pavilion a6120n: USB ports and slots memory card does not

  My Pavilion a6120n desktop computer has worked brilliantly since I bought it. Since last week the 2 front usb ports and 2 unused usb ports in the back have stopped working. My printer is plugged into a rear port and my wireless mouse is plugged into a second rear port and these work very well.

  I use usually a USB key for the exchange of data or card reader locations (which have also stopped working). I no longer see memory card icons in the window 'computer '. When install something again the "new hardware found" statement appears, but the driver install always fails. I think it's a software problem, but there is no usb drivers to download on the HP/support site that I can find... so...

  Here's what I've tried so far.

  Run antivirus software. Full scan & scan memory - no problem

  Don't scan complete malewarebytes - no problem

  I tried to reboot several times without success.

  Catering to several previous = failure restore points

  Computer restart in repair = failure mode

  Use the repair disk I did = failure

  Control the management of the power supply for each usb port see if power was properly routed = ok

  Removed the cover of the housing and carefully inspected the cables and connectors.

  Finally I tried to uninstall the drivers usb = failure

  After restarting the computer the last time that the boot file has failed, and after several hours of attempting a repair, I had to reinstall Windows 7 completely.

  Still no usb or memory card function.

  Any help would be appreciated

  Thank you

  MrBob38

  OK, after a lot of frustration and a reflection to when the problem started. I discovered it all started when I installed my new HP Envy 4500 printer all-in-one. It has wireless capabilities, but I installed it via a usb cable.  I just didn't know it would be the problem but I started with this premise.

  I got all components usb of the computer (except the mouse at the moment). So I uninstalled all the usb drivers I had on Device Manager.

  After restart, drivers loaded automatically and everything works fine now. I see my camera via the connection cable, the work now in sd slots and all the work of the usb.

  I left the 4500 want connected and installed the printer with the network provided on the installation disc software. I test printed from my computer and iPod so far, and it still works properly.

  I did have to reinstall Vista. Could it have been a glitch in the installation of the software want to through the usb cable? Don't know and don't care at this point. Just happy that everything works.

  Thanks for the comments, and I consider this problem to be solved.

  MrBob38

• VN7 - 791G: Wifi slow and unreliable when a USB drive is plugged into the USB ports on the right.

  WiFi becomes quick and reliable whne the memory stick is disconnected. Always reproducible. Does not occur when the memory stick is plugged into the USB port on the left. Also has anyone seen this behavior?

  Wireless network adapter Qualcom Atheros QCA61x4 with the version of the driver 12.0.0.230 dated 03-2016-21.

  Thank you

  Chris

  Hello

  The explanation is simple. I'm sure that the memory stick is a USB 3.0, a plugged in a USB 3.0 port. The problem is that all USB 3.0 devices generate a 2.4 Ghz interference, as it generates interference on the frequency working on wireless. The solution is to connect the player to another port or to spend the 5 GHz wifi if your router supports. The wifi antenna is probably very close to the port and to the USB key.

  This is known for a long time, and has nothing to do with the laptop.

  There is an article on the Web page of intel who described the problem more technically. You can search if you wish.

  This causes a problem also with a wireless mouse, if the receiver is connected next to a USB 3.0 stick or any other device.

• Tecra S1 - USB ports (all) and card reader does not

  Hello

  Just got a 2nd user Tecra S1. I was told that the drive SD card and USB ports do not work. Card reader (and card PCMCIA USB ports) works as well as the ps/2 port.

  Any ideas anyone? USB ports turn on power on indicators key USB etc but nothing is recognized under XP.

  See you soon

  Hello

  Maybe the USB ports listed in the devices with exclamation points Manager yellow. Did you check that?
  In addition, I would recommend updating the chipset driver. Visit the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  If you also received a Toshiba Recovery disk you may have to use it. The HARD disk will be wiped and XP will be installed all the drivers and tools.

  Good bye

• USB ports not working is not on the right side

  Hi I have an acer aspire 5742 laptop and the 2 usb ports on the right side do not work, they began to work but have stopped now again, thanks

  This may be a problem with an internal connection

• Satellite P850 - 12Z USB 3.0 Ports right side do not work USB 3.0 speed

  Hi all

  I bought a portable Satellite P850-12Z with * 4 * USB 3.0 ports. Two ports on the left side and two ports on the right side with sleep functions and fresh.

  If I connect an external drive Verbatim USB 3.0 ports on the left side, everything works fine. Transfer rate is about 70-90 MB/s, but if I connect the * same drive * USB ports on the right side I see the pop up message "this device can perform faster if you connect it to a Super Speed USB 3.0 port" and the transfer rate is about 20-30 MB/s. These ports operate as USB 2.0 ports.

  I repeat that all the available ports on the laptop are USB 3.0.

  Anyone know what is happening with ports USB 3.0 on the right side?

  I don't have another USB 3.0 drive to do more tests.

  Thank you

  Carlos

  > I repeat that all the available ports on the laptop are USB 3.0.
  You are absolutely right.
  I ve checked specification s notebook, and all ports are USB 3.0 ports.

  It is not easy to say what the problem is here.
  What you can do is to contact the nearest Toshiba service provider and ask for explanations.
  They know what the problem is here.

  Maybe a few update driver or BIOS update offered in the future will solve this problem. In my opinion, you should continue to use the ports on the left side for data transfer.

• Satellite L670D-10F - USB ports on the side right do not work

  Hello

  I have a problem with 2 USB ports on the right side of my laptop satellite L670D-10th with Windows 7. This morning, there was no problem, I've used my optical mouse without problem, but when I restart my computer this afternoon ports no longer works.

  I tried to off and reactivited ports, but it does not help. In the control panel of the equipment, everything is set as 'good work '.

  Can someone help me?

  Thank you

  Hey,.

  > I tried to off and reactivited ports, but it does not help.
  How did you do that?

  Probably there s something wrong with the chipset driver that controls USB ports in your case, I would be to reinstall the driver from the official website of Toshiba chipset.

  Did you install any additional software or driver for your mouse? If so I recommend you to remove this software.