HP-e017tx: the boot advanced settings is not available
I bought a computer hp laptop pavilion 2 years back. Within 3 months, I had damaged my recovery disk. It didn't work anymore. I had not created installation diks. So, to save space, I deleted the recovery partition. After that, when I go into the recovery of the system by using the F11 key, I get the following error
"Your PC needs to be repaired."
An unexpected error happened
Error code:xc0000001
You will need the recovery tools on your installation media. »
Now I've lost the ability to repair windows or start windows in recovery mode
What should I do?
If you have access to a computer running the same version of Windows as your laptop, you can create a rescue usb drive that allows you to access the security mode. The procedure is identical to Windows 8 and 8.1.
Tags: Notebooks
Similar Questions
-
Mobile data does not and the name of the Access Point settings are not available
I don't have a mobile data, not even the small up and down arrows or letters beside the sims signal bars appear.
I tried all the troubleshooting settings and different type of network, the airplane mode is off, mobile data are no limit, no power save modes are on. Phone is dual sim so I tried on the two sims and tried to disable the other sim and changing the sim slots, both sims are loaded with a credit of data that works in other android devices. WiFi works fine. Factory reset does not help.
There is that one thing that I can't not try troubleshooting. When I select settings > more > mobile networks > access point names, it says
"Access Point name settings are not available for this user.
Maybe if I could put APN I could get mobile data. How can I do or how I can try to get mobile data to work?
Phone's Xperia M4 Aqua E2363 with build 26.1.B.2.102 thanks if you can help
This text is a bit misleading, which is something that I have forwarded internally as your comments.
If you have no NPP stored the phone displays the text "the name of the Access Point settings are not available for this user" even if you use the owner account and have access to the settings.
Try to download the automatic settings from settings-> more-> Internet settings and see if that helps.
-
My question is how to open the system advanced settings in window 7 64-bit home preuim
My question is how to open the system advanced settings in window 7 64-bit home preuim
Hello
Assuming you mean the Windows Advanced System Settings screen, then right click on my computer and choose Properties. On the left side of the screen, you will see a link for the advanced system settings.
You can also call directly my pressing the windows and R key (which will bring up the Run dialog box) and typing in control sysdm.cpl
Good luck & enjoy Windows 7
JonIf this message was useful and allowed, please consider the vote and it offers as a response...
My Blog - www.insidetheregistry.com
-
"When you try to upgrade to photos in app store I get this message"the object you requested is not available in the store US."does anyone else have this problem or can you tell me how to find pictures in the app store" someone else meets this. Is it me or is it pictures?
Ever photos first? It should have been included when you first update of Yosemite and now El Capitan. I know that iPhotos updates get a message like that, but I didn't know the Photos app with a message with it.
-
4 expressions gives the message that the passive FTP mode is not available
I published Expressions4 about five times and now I get a box readings (the passive FTP mode is not available) and it will refresh any more. I need help to fix this program. I'm not a person on the site code.
Maybe you should try the Expressions support site.
-
IM using windows 8 Enterprise.
When im opening the windows store im getting the error that store is not available now, please try again after some timeOriginal title: store does not connectHello
Please, try the Troubleshooting Windows App tool mentioned in the following article and see if that helps:Hope this helps, good luck :) -
I just downloaded Creative Suite 6 on my new MacBook and not only the interface seems a bit different but I noticed that the oil paint filter is not available. I used the same discs on my office iMac and the filter still works there. I use it often and would appreciate any help to recover!
Please download and install Photoshop CS6 from the following link: download Creative Suite 6 applications
-
My recipient Receive the answer that the file I sent is not available or that they cannot open all of the files that I send. I have not had this problem in the previous version of Adobe send.
We have seen this happen when the link you send is broken up in the recipient's email.
Using anonymous or custom links? Anonymous, how you send the link to your recipient?
If your recipient send the link to you, can you open the file it?
-
Firefox does not open for me to make changes in order to correct the problem. The error box simply States that personal information settings do not exist or are inaccessible. This isn't a problem on this computeror I wouldn't be able to send this message.
This is usually caused by a problem with the file profiles.ini and the profile marked as the default value = 1 is no longer present on the hard drive.
- Windows: '% AppData%\Mozilla\Firefox\ '.
- Linux: ~/.mozilla/firefox/
- Mac: ~/Library/Application Support/Firefox /.
- Remove the profiles.ini file to force Firefox to create a new default profile
- Use the Profile Manager to create a new profile
- "Select a file" allows to retrieve an existing profile, if there is always a present
- http://KB.mozillazine.org/Profile_Manager
- https://support.Mozilla.org/KB/managing+profiles
- http://KB.mozillazine.org/Profile_folder_-_Firefox
See also "create a profile":
- https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
- http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a profile in the new profile, but be careful not to copy files corrupted to avoid transporting on the problem.
-
If please, I m using a Logic Pro 9 and are looking for the key "Advanced" (tools) but doesn't seem to do not for me in the 'preferences'. ". Why? Help!
Because there is no mode "Advanced Tool' to Logic 9.
Logic 9 is always and only has an advanced mode, there is no other method.
Advanced tools (and their duty to be checked) was a ridiculous logic X when it was released.
-
The Group Policy settings do not allow the use of a PIN code at startup Bitlocker Windows 8
Hello
I hope you can help.
I tried to implement the encryption on my new laptop Lenovo Twist with windows 8, but get the following error.
ERROR: An error has occurred (code 0 x 80310060):
Group Policy settings do not allow the use of a PIN code start. Please choose a
other BitLocker startup option.I tried to change local policy settings...
- Go to Local computer policy > Computer Configuration > administrative templates > Windows components > Bitlocker Drive Encryption > Operating System Drives
- Open the key require additional start authentication
- Activate this key, then assign the require startup PIN with TPM TPM configure startup PIN
.. .but always not the same error.
Help, please. He drives me crazy!
Hello
Thanks for choosing Microsoft Community to post your question!
According to your description, it seems that you have problems with activation PIN code on startup.
Refer to the suggestions from this link and check.
For more help, I suggest you ask your question in the TechNet Forum. http://social.technet.Microsoft.com/forums/en-us/w8itprosecurity/threads
-
Show deprecated Formats in the output Module settings do not appear in my output option!
Hello I am new using Adobe after effects CC 2014 and all guilds help I look for After Effects say replace your video output such as h.264 (MP4) on did I need to click on the checkbox called "Show obsolete Formats in the output Module Settings", BUT go does not appear on my options area. Only three options are in this section but nothing that calls it. Can anyone help me please with this problem?
See this for an explanation of this change and for the workflow to recommend:
using Adobe Media Encoder to create videos WMV, H.264 and MPEG-2 for After Effects
-
the drive or network that designates the shortcut "target file" is not available
Hello
I have a small network of about 10 computer connected to a switch, then switch in the router. We have an Excel shared that we need access on all computers and it worked but now shows "the drive or the network, which means the shortcut"xxx"is not available, make sure that the disc is inserted correctly etc... ("xxx" is just an example for the name of the file).
Im not sure what caused it to stop working, but it is still available on some computers, but not others. I can sometimes get when a particular machine is not turned on, but as soon as he does I lose access. I can see the machine where the file but that you cannot access the files.
Any ideas?
Thank you very much!
Hello
This could be a permission problem.
Step 1: Navigate to the target location and change the permissions of the drive.
For a file or folder, follow these steps:
a. right click on the file/folder you want to take control and then click Properties.
b. click the Security tab and then click OK.
c. click on Advanced Options and select the owner tab.
d. click on edit everything first.
e. If you want to take ownership of the contents of this folder, select the Replace owner of subcontainers and objects check.
f. click OK and then click Yes when you receive the following message appears: you are not allowed to read the contents of directory folder name. Do you want to replace the the directory permissions with permissions granting you full control?
g. click OK, and then reapply the permissions and security settings that you want for the folder and its contents.
-
Large screen display in Windows XP - correct parameters settings is not available
I recently bought a screen (Samsung SyncMasterS23A350H) recommended display resolution 1920 x 1080 (16:9). This setting is not available in my display settings. The only setting of 16:9-1280 x 720 - only makes things even more tense, with black areas above and below. Device Manager indicates that my graphics card is SiS 760. All devices are installed and working properly. Do I need a new graphics card? Download anything (free?) to get the right settings on Windows XP? What is the best solution?
Hello
Method 1:
I suggest you to check if the installed graphics card is compatible with the hardware.
Method 2:
I suggest to update the graphics card drivers and check to see if it helps:
How to manage devices in Windows XP
http://support.Microsoft.com/kb/283658
Method 3:
If the graphics card is not compatible with the hardware, you may need to get a new graphics card to the monitor.
-
Unit - mailbox moved to the new storage group is not available
Hello
I have a 4.0 (4) unit UM with a message from Exchange 2003 offbox store. During the initial installation, only the first storage group on the mail server was present and mailboxes of the users are hosted here.
Recently, a new storage group was created on the mail server and a mailbox has been moved from the first group of storage to the new storage group. The Subscriber is able to receive voice messages via e-mail, however his MWI does not illuminate. When it tries to connect to retrieve messages on his phone, the unit said "your messages are not available now.
I am able to create or import users that are hosted in the new storage group, but I'm having the same symptoms. Is it necessary to rerun the configuration of message store wizard?
Thanks in advance.
Have you run Assistant permission for the new Bank of mailboxes?
The other thing to do is to restart the AvMsgStoreMonitor service; But wait after hours. A reboot will do the same.
Maybe you are looking for
-
Satellite A110-228: need Ethernet card driver
I need a driver for my PC etherneth card laptop toshiba satellite A110-228.Please help me.
-
Satellite P850 - right USB ports stopped working
I have a new P850 Satellite, after a short period, that the two right usb ports stopped working, I had only a wireless mouse connected to them at the time. Is there a reset for these ports, I tried to uninstall and reinstall, no change. Anyone has an
-
Satellite T130 - 13L - Wireless disappeared
Hi yesterday my Satellite T130 - 13L had it's wireless stop working completely. When I press FN and F8 bluetooth is there, but nothing else. I've looked everywhere and it simply disappeared. So far I found no solution, I've heard it might be a hardwa
-
Every Pc has yellow ball on the NIC (LAN and WIFI)
All client computers obtained yellow ball in the NIC (LAN and Wifi) after running GPUPDATE/force on domain controller. I've run the gpupdate and all afftected users once again, alsoaccount has been removed from the ACL of the directory. I am the admi
-
My computer (windows vista) is not able to check the updates of windows, anyone able to help? I get the following error message