HP elitepad 1000 g2: touchscreen driver missing hp elitepad 1000 g2

Similar Questions

• Satellite A30 - ACPI driver missing

  Hello
  I have an old A30 that I just installed Win7 on. Everything is fine apart from a missing driver - unknown device ACPI

  In Device manager the hardware ID is ACPI\CMP0101

  Now this laptop fan lights not bad and she has a random problem to close without reason. I checked the fans and they are clear. In my view, that stops can be connected to this driver missing because it can control the temp/fans that stop it overheating, and then I could be wrong...

  I would appreciate any help and advice

  Thanks in advance

  mcdodd

  Hello

  Are you sure that you want to use Windows 7 on this computer laptop oldie? In my opinion, you should be happy with a preinstalled OS to Toshiba. There are all the drivers and tools pre-installed and you don t have the stress with the driver installation. You can have fun with your laptop :)

  As you can see in another thread, you must reinstall Windows to solve this problem:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=126340

• Pavilion 15-n201sk: driver missing

  computer hp laptop pavilion 15-n201sk windows 7 64-bit

  driver missing for:

  1 - Ethernet controller

  2 - Bluetooth controller

  3 Intel (r) 8 series xHCI HC - 9 c 31

  4. PCI device

  5 - video controller

  6 - unknown device

  Hello:

  You should be able to use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/product/HP-Pavilion-15-N100-notebook-PC-series/5436989/model/6422011/drivers

• ProBook 6550 b: driver missing Base system device

  After you have reinstalled Windows 10 on a Probook 6550 b I can't find the correct driver for both devices.

  -Driver missing Base System Device 1:
  Device PCI VEN_1180 & DEV_E852 & SUBSYS_146D103C & REV_01\4 & 1089976f & 0 & 02E2 requires installation.

  -Lack of pilot system of Base 2 device:
  Device PCI VEN_1180 & DEV_E230 & SUBSYS_146D103C & REV_01\4 & 1089976f & 0 & 01E2 requires installation.

  Is it possible to put me in the right direction?
  
  Thank you very much.

  Lennard

  Hello

  Try to install the Windows 7 version of the Ricoh Media Card Reader Driver.

  Kind regards

  DP - K

• I have a 2560p which shows driver missing for 'Base system device '.

  I have a 2560p which shows driver missing for 'Base system device '. Shows the location

  PCI Slot 2 (bus PCI 35, device 0, function 0).

  What is the device and where can I find the driver? Thank you

  Excellent thanks a lot!

• ProBook 6640b: driver missing for 'Base system device' XP Pro on a Probook 6640 b

  Greetings-

  I get two error messages that read "Base system device" driver missing.  The hardware for the first is ID:

  PCI VEN_1180 & DEV_E230 & SUBSYS_1726103C & REV_01

  PCI VEN_1180 & DEV_E230 & SUBSYS_1726103C

  PCI VEN_1180 & DEV_E230 & CC_088000

  PCI VEN_1180 & DEV_E230 & CC_0880

  And the other is:

  PCI VEN_1180 & DEV_E852 & SUBSYS_1726103C & REV_01

  PCI VEN_1180 & DEV_E852 & SUBSYS_1726103C
  PCI VEN_1180 & DEV_E852 & CC_088000
  PCI VEN_1180 & DEV_E852 & CC_0880

  Any guidance would be appreciated!

  Thank you.

  Hello:

  You need this driver that will install two devices...

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4149986&swItemId=ob_79991_1&swEnvOid=1093

• Compaq presario v 3780TU: Base System Device Driver missing

  product compaq presario v 3780TU

  problem - the two driver missing basic systems, audio device does not not only integrated speakers work not, works of headphones

  problem when I upgraded to the Windows OS 10

  first base h/w device id is

  PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C & REV_12
  PCI VEN_1180 & DEV_0843 & SUBSYS_30CD103C
  PCI VEN_1180 & DEV_0843 & CC_088000
  PCI VEN_1180 & DEV_0843 & CC_0880

  ID of second base system device h/w

  PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C & REV_12
  PCI VEN_1180 & DEV_0592 & SUBSYS_30CD103C
  PCI VEN_1180 & DEV_0592 & CC_088000
  PCI VEN_1180 & DEV_0592 & CC_0880

  driver audio h/w id is

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CD & REV_1000
  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CD

  Please help solve

  Hello:

  For basic system devices, you need this driver...

  This package contains the driver and the host controller Ricoh 5-in-1 card reader for laptops models and operating systems.

  File name: sp37614.exe

  For the other device you need this driver...

  This package contains the driver for the Conexant HDAUDIO Soft Data Fax Modem with SmartCP (CX20548) in the notebook models and operating systems. This driver enables the remote access feature and provides a UI for formodem.

  File name: sp37817.exe

• Cannot install windows 7-error: dvd/cd driver missing

  Try to install Windows 7 on a different SSD, but get an error indicating that the missing required cd/dvd driver.  How Windows load into memory from a cd/dvd that windows 7 says there is no driver missing?  This is the same installation disc that I used on a previous SSD without problem.  I have 2 other unused installation floppies, and each returns the error message.  This problem arose when an attempt to use System Restore Image I had done just on an external SSD and a drive hard usb.  The error I had to try to use one of them was that the Image was made in EFI and the computer seeks to restore in BIOS. It's the same machine.  Yes, disk management displays the UEFI 100 MB system partition.  The motherboard is an Asus F2A85 - V Pro.  List Disk running installation diisk sees only the cd/dvd and the drive hard usb but not the SATA drives.  When you normally use that List Disk sees everything.  The UEFI bios sees all readers, when you use the system installation disk.  I used a system repair disc made from the same computer at the same time as the picture of the system and used to start and got a system repair options is not compatible with this version of windows.  The windows version is 6.1.7601 sp 1 build 7601.  Any ideas?

  Hello

  Thank you for your response.

  There are two modes of starting particularly machine-> BIOS & EFI. BIOS is the general start mechanism found in most machines. Some of the machines also support EFI boot mechanism with BIOS

  Either the BIOS or EFI is set as the default in your machine - Please check start the installation system which

  one is active by default.

  If the EFI operating system is installed, it will create an EFI system partition in your machine. Installation of BIOS has no EFI partition.

  Warning in the BIOS: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful. Please feel free to post in the case where you are facing other problems with Windows, we will be happy to help you.

• mass driver missing

  My computer crashed again seagate HDD not new install and I'd get missing error mass driver. No presentation of drivers and nothing else in the USB ports. I formatted via the services window because it wouldn't show. Now it shows in Solution Explorer, but not formatting through properties or install a copy of fresh win7 drive, just to get HDD mass driver missing?

  Hello

  1. the CD worked fine earlier?

  2. have you checked the CD on other computers?

  If it doesn't there has no drivers on the CD, then you may need to contact the manufacturer and install the latest version of the drivers.

  http://www.Seagate.com/support/downloads/

  Let us know the results. We will be happy to help you.

• Haw to download and install a driver missing for my memory card reader?

  Haw to download and install a driver missing for my memory card reader?

  Hello

  I'd be happy to help you. What brand laptop do you have? Is what model? And you know the brand of card reader? I need this information to find the right driver for you.

  Kind regards

  BearPup

• my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

  my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

  original title: printer driver

  my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

  Is what printer? Where did you get the driver?

  That you download and install the * good * driver for him? It must be for Windows 7 and Windows 7 32-bit or 64-bit Windows 7, depending on what you are running.

• Touchscreen driver ST2220t

  I download the driver XP the Dell driver download site. But there is no driver in the

  zip file. I try to order e-mail as Chris suggested support for the serial number as well

  that I can get help from technical support. My e-mail went into the black hole.

  Anyone know how I can get the XP driver for the monitor ST2220t touchscreen?

  My apologies, I just see it in the manual ST2220T:
  * Support native Win7 multi touch. (plug & play)
  * Support the single-touch (mouse behavior) in Vista. (Must install the touchscreen driver. Please find the driver touch screen for Vista on the CD)
  Supports Windows Vista and Windows 7 OS only

• Satellite Pro A60: Windows XP cannot start isapnp.sys driver missing or corrupt

  I had a Satellite Pro A60 for about 3 years without problems.

  Last week Toshiba touchscreen developed vertical lines of the bleeding and I got error message "Windows XP cannot start because of the missing or damaged driver isapnp.sys. I tried using the recovery disk, but it loads OK, but it fails to make a difference. Hard drive seems to work OK as slave to another computer.

  No matter what wil suggestions appreciated!

  Thank you

  Found this Microsoft Knowledge base article:
  You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup

  http://support.Microsoft.com/kb/315311/en-us/

  Can it help

• Pavilion dv6-2113tx: driver3x and ene cir receiver base system device driver missing for 2113tx dv6 on w7 ultimate

  Hi, I could not connect my pavilion dv6 2113tx Samsung tv using ch I have cable. When I ran the diagnostics I found this driver base system were missing for 3 and an ene cir receiver driver is missing too. The device base system Id are as shown below

  PCI bus4 device0function4

  PCI bus4 device0function3

  PCI bus4 device0function1

  ENE CIR receiver - intel (R) controller interface LPC PM55 express chipset

  could someone please help with these drivers where I can find them and also I did not detect second monitor when I tried to adjust the resolution of the screen

  Hello:

  You need these drivers...

  Basic system:

  This package contains the driver for laptop models JMicron card reader supported and operating systems.

  File name: sp45010.exe

  ENE:

  This package contains the ENE CIR Receiver driver for laptop models supported and operating systems.

  File name: sp44983.exe

  If you cannot detect an external monitor, you probably also need to install the graphics driver.

  This package provides the driver for the NVIDIA GeForce GT 230 M video chip or 320 M in the notebook models and operating systems.

  File name: sp54929.exe

• Driver missing for windows 7

  I just installed windows 7 on a Hp 6653 CL. The operating system seems to work very well, but there are 2 drivers in the Device Manager screen which I seem not to be able to identify. the hardware for the devices ID are:

  PCI\ ven_1180@dev_0592@subsys_30cc103c@rev_12
  
  PCI\ ven_1180@dev_0843@subsys_30cc103c@rev_12

  I was wondering if any of the residents gurus have an idea what driver is missing.

  Thanks in advance.

  It is the 5 in 1 Ricoh card reader

  PCI VEN_1180 & dev_0592 & subsys_30cc103c

  Vista 64-bit driver (should work on Win 7, if it installs)

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2100 & LC = on & DLC = in & CC = US & lang = to & Product = 3650971

  Vista 32-bit driver (should work on Win 7, if it installs)

  http://h10025.www1.HP.com/ewfrf/wc/softwareList?OS=2093 & LC = on & DLC = in & CC = US & lang = to & Product = 3650971