HP Envy 100 - impossible to activate the scan from the printer

Similar Questions

• Impossible to activate the Scan of the computer on OfficeJet pro 8500 A910

  Impossible to activate the "scan to computer" on HP OfficeJet Pro 8500. Used to be able to. It's not even a choice on the Printer Wizard. I uninstalled completely and reinstalled. It worked until I rebooted. I can scan very well to the computer, but not the printer. Running Windows 7

  Hey daltsdad,

  It seems that you have the old version of the software for this printer. There was an update that came out not so long ago that may be missing on your system. Please uninstall the printer software and reinstall it with the link below:

  8500 downloads

• HP OfficeJet Pro 8610: Impossible to activate the scan of the computer, complete the installation of the utility

  I'm not able to activate the analysis of my desktop computer or my laptop. I pedaled power the router, printer and computers, ran disk utility and repair permissions, I uninstalled the printer and reinstalled. I received a message that the installation of the HP Officejet Pro 8610 has been completed successfully, but when he goes then HP utility-Setup-HP Officejet Pro 8610, happens to alerts from HP and I get the error message: "a critical error has occurred. Please restart the application, and then try again ' and I am unable to continue. Download and open HP Easy Start are successful but he opens the HP utility at the end and I get the same message once it arrives to alerts from HP.

  Opening to the high HP utility-HP Officejet Pro 8610 and clicking on scan settings, Scan of the computer initially appears without the box checked to activate this function and the error message: "the computer Scan is disabled. You can always start the scanning of your computer software analysis - for example, HP scanning "." Click on the button to activate the Scan of the computer generates this error message: "error of Communication. Unable to communicate with the device. Check the cables and the connection parameters. If the problem persists, try restarting your computer and the HP device "."

  In the window of the printer, press Scan and the Scan of the computer selection produces the error message: "not found computer. Scanning software HP is required for this feature. If installed, open the HP utility and under settings of scanning, select scan to computer and enable "."

  I tried everything suggested, and what I found online to try.  I'm missing something or not doing something correctly?

  Thanks for any help!

  Hi @3star8,.

  Welcome to the Forums of HP Support! I read your post and see that you are unable to activate the computer option via the software scan. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I think that the procedure described in this post, will help solve this problem. Here is the link: Re: impossible to activate the Scan.

  This is the URL of your drivers, e-all-in-one-HP Officejet Pro printer 8610 series full feature software and drivers.

  Please let me know the result and if there is anything else I can help you. Thank you.

• Impossible to activate the dark mode in Firefox 39.0 with subject: config.

  After you have installed the 39.0 beta of Firefox, I was impossible to activate the dark by topic mode: config.

  That's what I changed:
  Browser.devedition.Theme.Enabled: true
  devtools. Theme: black
  lightweightThemes.selectedThemeID: [email protected]

  I use "Fox, but better" plugin and I have to disable it without success.

  guigs2 said

  Hi CiRiX,
  I understand that you are using a dark theme and have changed the settings in topic: config, that could change how the button toggle works in the themes section for about: addons...

  It is possible to reinstall the extension, or try these troubleshooting steps:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  I managed to fix it by clicking Activate and then deactivate it on another theme.

  Thanks for your help!

• Impossible to activate the laptop on Windows 7 computer wireless network connection

  I'm not able to activate my wireless network on Windows 7 laptop connection. I have Atheros AR928X Wireless Network Adapter and I am unable to connect wireless. I was able to connect a few weeks previously, but now my Wireless Network Connection is still "NOT CONNECTED", I called my local router support and they said that everything is good on both sides and that my settings of the adapter or the driver must be on off somehwere. Help!

  * original title - impossible to activate the wireless network connections to connect to the internet with Windows 7 and Atheros AR928X Wireless Network Adapter on laptop.*

  Hi djmoore20,

  See the following article with information and troubleshooting on your question:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Oracle DB 11.2.0.4: Impossible to activate the table lock after having stopped it

  Hello

  I use Oracle Database 11.2.0.4.

  After reading the documentation on how to prevent unwanted table DDL statement.

  I found a way to do this in by issuing 'edit the table < table_name > disable table lock'.

  Turn it off doesn't work, however I can not re - activate.

  The error message is:

  ORA-00054: resource busy and acquire with NOWAIT specified or timeout expired

  I want to activate the lock, because I need to add new columns to this table.

  I was digging on several threads that have the same problem as mine. But none of them gives any acceptable solution.

  Impossible to activate the table lock after disablng it

  ALTER table enable table lock blocking

  However, a poster responds by quoting the documentation that says: (Note: I can't find what doc says)

  'Specify the TABLE LOCK ACTIVATE to activate the table locking, allowing operations on the table DDL. All currently process transactions must commit or roll before Oracle database allows table locking. »

  
  

  By the way:

  1. the table is mine and nobody knows there are (therefore, it would be just me which undoubtedly make any DML at it, and I did not).

  2. I've disabled the lock table months ago and tried to turn it back on because I want to add the new column to the table.

  
  

  It means that I have to wait for that "ALL transactions running" happening on the current scheme being validated or cancelled?

  The table itself is located on the stops and never schema of production on which transactions take place continuously.
  

  
  

  Is it true that Oracle expects all execute transactions? Is it known bug?

  Why would Oracle wait as all transactions which has nothing to do with the underlying table?

  Is there no workaround solution to solve this?

  
  

  Note:

  I tried to deactivate - activate the table locking on the development database (which has less transaction) and it works fine.

  
  

  Kind regards

  
  

  Buntoro
  

  Your best option might be suspended from the database. If it is an application of type OTP, it must suspend in some secinds, do your DOF, then get out. Your users should not notice. I have described the mechanism here,

  Quiesce

  --

  John Watson

  Oracle Certified Master s/n

• Impossible to activate the update lightroom5 to lightroom6

  Hello

  There are impossible to activate the update of lightroom5 to lightroom6 car cannot open the Web page to me.

  And when I ask to generate I have the not not request.

  So how do?

  Thanks for your reply.

  

  We are sorry for the inconvenience that it poses for you. I ask try you following steps to serialize Lightroom CC trial to activate like Lightroom 6:

  • https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  How to apply for a code? I have a serial number. My computer connect to internet, but Adobe Acrobat XI will be impossible to activate the product

  Hi Kenneth Ofosu Barko,

  Please disable any firewall or Antivirus for now and try to activate Acrobat again.

  Ask for the Code is generated when you click on "Generate Code button Request" (see the Screenshot). Did you follow the link provided by Ana Maria? You see the screen below while activating offline mode?

  Kind regards

  Rahul Tyagi

  

• Discover the State of the agent (16) composer initialization error: impossible to activate the license of the software (expected 1650 seconds)

  Hello

  I have problem in View 4.5. When I create the new office with Windows 7 32 bit pool, pool automatic, floating, connected clone, fast prep. After the deployment of Windows 7 machines they had to customize report. After a few minutes's status has changed error (error state View Composer agent initialization (16): impossible to activate the license of the software (expected 1650 seconds))

  Could you please help me, where is the problem?

  I bought licenses for the view with the composer.

  My environment are:

  2 x vCenter server 4.0.0 build 258672 (windows 2008 r2 + Composer 2.5.0 - 291081)

  4 x 4 ESX u2 (2xESX by vCenter server)

  2 x display connection servers x86_64 - 4.5.0 - 293049 (Windows 2008r2) as a single environment. View environment using the server vCenter + 2 composers

  Thank you

  You have KMS license in effect for your Windows 7 Machines.  If this isn't the case, that is the question.

  You have 4 options:

  Option 1: Get KMS licenses in place for Microsoft Win7. -by far the easiest.

  Option 2: Use SYSPREP instead of QuickPrep

  Option 3: Add 1 at a time and activate the link manually clones b4 customization finishes - pain in the rear. Or be creative if it's your test env.

  Option 4: Hack the key "reg" activate this supossedly a composer. Here is the info:

  HKLMsystem/CurrentControlSet/services/vmware-viewcomposer-ga/SkipLicenseActivation to '1'.

  Of course the Win7 Office will be up to the period-eval evaluation mode expires but can be useful in a temporary unit or POC.

  The foregoing is not tested I tried it in my environment but do not know if it works because I don't want to mess with my installing any further until my POC is complete.  But it seems to work.  I found no key but went ahead and created.  Seems to work.

  Larry

• Photosmart 7520, impossible to reinstall the printer after removing software

  Name of the product and operating system: Photosmart 7520, Windows 7 32 bit.

  Description of the problem:

  I tried a lot already if the description is quite long, bear with me here.

  At the beginning everything worked well. After a few months, the printer was not capable of scanning more computers in the network. He could identify them, he was not able to transfer the scanned document. Printing from computers was still possible. I did first network tests, even reset network to factory settings, but everything was fine. Try to solve this problem, I ran HP print and scan the doctor, the program gave me a twain scan error and was not able to fix it. Because it was not able to fix it. I uninstalled the computer HP printing software, reinstall the printer completely and try if it works. Digitization (magicly) now works on my other computer, but I can not reinstall the printer on the computer where I uninstalled the software, because it is impossible to find the printer on the network. I also tried to connect the USB printer, without a bit of luck. I think it's a driver problem, because the computer seems to have many 7520 drivers broken out there. I hope someone has a way to help me, because I don't know what to do anymore...

  

  Try to run Malwarebytes to see if your PC has installed any villains

• How can I activate the 'print spooler server' at the top of a tower with XP.

  How can I activate the 'print spooler server' at the top of a tower with XP.

  Step by step instructions: -.

  http://www.ehow.com/how_5993418_troubleshoot-Server-service-not-running.html

• OfficeJet Pro 8620: can not scan from my printer on my computer

  Hello. My computer recently downloaded windows 10 and since then I can not scan from my printer to my computer (although I can scan my computer on my printer).  I get the following error message (and hp scan doctor found no problems): "the analysis could not be performed because of one or more of the following problems: - computer connection is lost, the application of scanning the computer is currently in use, OCR application - is not installed on the computer.

  Is there a way to fix this?

  Thank you!

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/HP-OfficeJet-Pro-8620-e-all-in-one-printer-series/5367611/model/5367613#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  How to scan to computer

  Once you have installed the software,

  1. click the printer (on your desktop) and it will bring up the HP printer Assistant.
  2. in the menu analyze, there is a 'manage Scan to Computer', click on that.
  3. make sure that 'enable' the Scan of the computer. Also check the tab "Automatically start Scan of the computer when I connect Windows" is to check if you want to have this feature permanently. (an example is shown below)
  

  

  Hope that helps.

• HP deskjet 3050 j610: when I try to scan from my printer it will not connect

  When I try to scan from my printer I get a message "Cannot find HP deskjet 3050 j610. But I can print from it and get data as ink tank printer. It started abruptly today. It worked OK until a few days ago.  The printer is connected by a USB cable. I tried the driver update and 'repair' menus via HP scanning problems without success.  If I press scan on the printer button it says "scan error. try to scan from computer', but that's what I usually do using the calculation icon in the menu START.

  I solved the problem. The basic steps were (1) using the HP links to update my driver printer and research to find errors in the scanning program. (2) restart my computer and printer. After the first part, I didn't see any listed results. Normally I would have restarted the printer and the computer, but is afraid of losing my sites and the investigation, so I kept looking for the various comments.  I found a reference to this site in one of the post near mine for a #7520 device but cannot return immediately to give the author of the post. I think I sent him a response.

  http://support.hp.com/us-en/document/c00040499.

  This site gives lots of tips for different situations and devices. I followed the advice that it applied to my computer and printer who ended with step 2 (I use a USB connection) and the scanner was working again.

• Want 5540: Impossible to activate the computer Scan: 5540 Envy, MacOS 10.12

  I tried to activate the Scan of the computer using the HP utility application settings. I received the message (in part), "HP software required for the Scan of the computer could not be located on this computer. Please download and install the latest software recommended HP... ».

  I then proceeded to the HP website and downloaded the appropriate firmware update. When running the executable, I received the message (in part) "device is in an error state and cannot be flashed because of this... »

  NB., we have been able to print using this printer, Wi - Fi, easily, since the purchase and installation on 28/08/16. No problem. In addition, using the * Apple * settings, by selecting 'Printers and Scanners' and going through the routine of "Scan", I can acquire a successful analysis (placed in "jpg" format in the 'Images' folder).

  I'm so concerned - very disappointed - as to why I can't activate and use the "Scan to computer" utility from HP. It does not work from the laptop computer side or from the printer control panel.

  Advice?

  Hello
  If you have HP scanning or a previous version of HP Easy Scan in the Applications folder or HP subfolder, delete it by moving it to the trash, and then empty the trash.
  
  Install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.
  
  Kind regards
  Shlomi

• DeskJet HP 3830: impossible to activate the scan on mac for 3830 aio

  Impossible to enable analysis of the computer using the hp utility or by using easy scan, but can analyze whether I go to System Preferences and then printers then scan that works very well, I tried to remove and reinstall several times but it makes no difference.

  The connection to the printer over the network and works very well on printing as well if it's not a connection issue.

  Any help would be useful

  Hello
  In the Applications folder or its subfolder HP remove all existing HP Scan or app HP Easy Scan by moving it to the trash, then empty the trash.
  
  Then install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

  Now, check if you can see a difference when accessing the HP utility
  Kind regards
  Shlomi